If radioactive plumes are released outside due to loss of containment building integrity during a nuclear power plant accident, these materials might travel with the wind, affecting both the surrounding environment and neighboring countries. In China, most nuclear power plants are located on the eastern coast. Consequently, a radioactive plume generated during an accident could negatively impact even the western part of the Korean Peninsula due to westerly winds. To detect such problems early, respond quickly, and protect residents, a system that can monitor aerial radiation under normal conditions is needed. Additionally, a detection system that can operate in real-time in an emergencies conditions is required. The current method for aerial radiation measurement takes environmental radiation data from a monitoring post 1.5 m above the ground and converts it to altitude. To measure actual aerial radiation, an expansive area is surveyed by aircraft. However, this approach is both time-consuming and expensive. Thus, to monitor radioactive plumes influenced by environmental factors like wind, we need a radiation detector that can gauge both radioactivity and directionality. In this study, we developed a radiation detector capable of assessing both the radioactivity and directionality of a radioactive plume and conducted its performance evaluation. We miniaturized the radiation detector using a CZT (Cadmium Zinc Telluride) sensor, enabling its mounting on unmanned aerial vehicles like drones. It is configured with multi-channels to measure directionality of a radioactive plumes. For performance evaluation, we positioned two-channel CZT sensors at 90 degrees and measured the energy spectrum for angle and distance using a disk-type radioactive isotope. Using this method, we compared and analyzed the directionality performance of the multi-channel radiation detector. We also confirmed its capability to discern specific radioactivity information and nuclide types in actual radioactive plumes. Our future research direction involves mounting the multi-channel radiation detector on a drone. We aim to gather actual aerial radiation data from sensors positioned in various directions.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.

The aim of this study was to investigate the effect of isolated lactic acid bacteria (LAB) on the quality of high moisture rye silage. Rye forage (Secale cereale L.) was harvested at the heading stage (27.3% of dry matter (DM)) and cut into approximately 3-5 cm lengths. Then, the forage divided into 4 treatments with different inoculants: 1) No additives (CON); 2) Lactobacillus brevis strain 100D8 at a 1.2 x 105 colony-forming unit (cfu)/g of fresh forage (LBR); 3) Leuconostoc holzapfelii strain 5H4 at a 1.0 x 105 cfu/g of fresh forage (LHO); and 4) Mixture of LBR and LHO (1:1 ratio) applied at a 1.0 x 105 cfu/g of fresh forage (MIX). About 3 kg of forage from each treatment was ensiled into a 20 L mini-bucket silo in quadruplicate for 100 days. After silo opening, silage was collected for analyses of chemical compositions, in vitro nutrient digestibilities, fermentation characteristics, and microbial enumerations. The CON silage had the highest concentrations of neutral detergent fiber and acid detergent fiber (p = 0.006; p = 0.008) and a lowest in vitro DM digestibility (p < 0.001). The pH was highest in CON silage, while lowest in LBR and MIX silages (p < 0.001). The concentrations of ammonia-N, lactate, and acetate were highest in LBR silage (p = 0.008; p < 0.001; p < 0.001). Propionate and butyrate concentrations were highest in CON silage (p = 0.004; p < 0.001). The LAB and yeast counts were higher in CON and LHO silages compare to LBR and MIX silages (p < 0.001). However, the mold did not detect in all treatments. Therefore, this study could conclude that L. brevis 100D8 and Leu. holzapfelii strain 5H4 can improve the digestibility and anti-fungal activity of high moisture rye silage.

The present study was aimed to estimate the effect of ensiling period and bacterial inoculants on chemical compositions and fermentation characteristics on rye silage harvested at delayed stage. Rye (Secale cereale L.) was harvested after 20 days of heading stage (29.4% dry matter, DM). The harvested rye forage was applied with different inoculants following: applications of distilled water (CON), Lactobacillus brevis (LBB), Leuconostoc holzapfelii (LCH), or mixture of LBB and LCH at 1:1 ratio (MIX). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 50 (E50D) and 100 (E100D) days in triplicates. The E50D silages had higher in vitro digestibilities of DM (IVDMD, p<0.001) and neutral detergent fiber (IVNDFD, p=0.013), and lactate (p=0.009), and acetate (p=0.011) than those of E100D, but lower pH, lactic acid bacteria (LAB), and yeast. By inoculant application, LCH had highest IVDMD and IVNDFD (p<0.05), while MIX had highest lactate and lowest pH (p<0.05). The CON and LCH in E50D had highest LAB and yeast (p<0.05), whereas LBB in E100D had lowest (p<0.05). Therefore, this study concluded that LCH application improved the nutrient digesbility (IVDMD and IVNDFD) of lignified rye silage, and longer ensiling period for 100 days enhanced the fermentation characteristics of silage compared to ensiling for 50 days.

This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.

Oyster mushrooms are one of the most famous mushrooms for foods in Korea. ‘Santari’ developed on this study is P. pulmonarius of oyster mushroom species. ‘Santari’ is a new variety of oyster mushroom for the bottle culture. It was bred by mating with monokaryons isolated from ‘GMPO20404’ and ‘Hosan’. The optimum temperature for the mycelial growth was 26～29°C on PDA medium and that for the primordia formation and the growth of fruiting body of ‘Santari’ was 22°C and 20°C on sawdust media. It took 34 days to finish spawn running, 3 days to finish primordia formation, 3 days to finish fruitbody growth in the bottle culture. In the characteristics of fruit body, pilei were round type and brownish, stipe color was white and stipe shape was long and thick. The yield per bottle was 172g/1,100ml and was 43% higher than that of control variety(Hosan). As results of the physical properties of fruit body, springness, cohesive, gumminess and brittleness of stipe tissue were 87%, 82%, 193g and 16kg, respectively. The values of them are lower than those of control except cohesive.

Oyster mushrooms are one of the most famous mushrooms for foods in Korea. ‘Santari’ developed on this study is P. pulmonarius of oyster mushroom species. ‘Santari’ is a new variety of oyster mushroom for the bottle culture. It was bred by mating with monokaryons isolated from ‘GMPO20404’ and ‘Hosan’. The optimum temperature for the mycelial growth was 26~29°C on PDA medium and that for the primordia formation and the growth of fruiting body of ‘Santari’ was 22°C and 20°C on sawdust media. It took 34 days to finish spawn running, 3 days to finish primordia formation, 3 days to finish fruitbody growth in the bottle culture. In the characteristics of fruit body, pilei were round type and brownish, stipe color was white and stipe shape was long and thick. The yield per bottle was 172g/1,100ml and was 43% higher than that of control variety (Hosan). As results of the physical properties of fruit body, springness, cohesive, gumminess and brittleness of stipe tissue were 87%, 82%, 193g and 16kg, respectively. The values of them are lower than those of control except cohesive.

The purpose of the study was to determine the effect of joint mobilization with respiratory muscle taping on pulmonary function and chest expansion ability in patients with chronic stroke. Thirty subjects (n=30) were randomly divided into three groups: a joint mobilization group (n=10), a respiratory muscle-taping group (n=10), and a joint mobilization with respiratory muscle-taping group (n=10). Measurements for pulmonary function and chest expansion were performed to assess its effectiveness. A spirometer was used to measure the pulmonary function, and a tape measure was used to assess the chest expansion. In the joint mobilization group, peak expiratory flow (PEF) was increased. Forced expiratory volume in one second (FEV1), forced vital capacity (FVC), and upper and lower chest expansion were also increased. All of variables of respiratory muscle-taping group also were increased. FEV1 and FVC were significantly different between joint mobilization with respiratory muscle-taping and respiratory muscle-taping group. The results of the present study suggest that mobilization with respiratory muscle taping increase the pulmonary function and chest expansion.

In the present study, we analyzed ecological functional groups of diverse hymenopteran families from five different vegetation stands in the Gwangneung forest. Hymenopterans were collected using three different traps from March to October 2015. Pollinators were a dominant group from March to May and declined significantly after that period. Parasitic group made major peaks from April to May and made another small peak in August. Predatory group reached to a peak in April and July respectively but appeared to be active even in October when all the other groups mostly disappeared. The vegetative communities were ordinated with the hymenopteran family assemblages using the Nonmetric multidimensional scaling (NMDS). The result of NMDS analysis showed that the community structure of the hymenopteran functional groups from the Quercus rubra stand is different from those of the other stands.

The gingival epithelium of the oral cavity is constantly exposed to exogenous stimuli such as bacterial toxins, allergens, and thermal changes. These exogenous stimuli are resisted by innate host defense in gingival epithelial cells. However, it is unclear exactly how the exogenous stimuli affect detrimentally on the human gingival epithelial cells. Here, we investigated whether the allergen, such as house dust mite (HDM) extract, is linked to Ca2+ signaling and proinflammatory cytokine expression in primary cultured human gingival epithelial cells. HDM extract induced an increase in intracellular Ca2+ concentration ([Ca2+]i) in a dose-dependent manner. Extracellular Ca2+ depletion did not affected on the HDM extract-induced increase in [Ca2+]i. The HDM extractinduced increase in [Ca2+]i was abolished by the treatment with U73122 and 2-APB, which are inhibitors of phospholipase C (PLC) and inositol 1,4,5-trisphosphate (IP3) receptor. Moreover, HDM extract induced the mRNA expression of pro-inflammatory cytokine, interleukin (IL)-8. These results suggest that HDM extract triggers PLC/IP3-dependent Ca2+ signaling and IL-8 mRNA expression in primary cultured human gingival epithelial cells.

HyPer is the genetically encoded biosensor of intracellular hydrogen peroxide (H2O2), the most stable of the reactive oxygen species (ROS) generated by living cells. HyPer has a high sensitivity and specificity for detecting intracellular H2O2 by confocal laser microscopy. However, it was not known whether high speed ratiometric imaging of H2O2 by HyPer is possible. We thus investigated the sensitivity of HyPer in detecting changes to the intracellular H2O2 levels in HEK293 and PC12 cells using a microfluorometer imaging system. Increase in the HyPer ratio were clearly evident on stimulations of more than 100 μM H2O2 and fast changes in the HyPer ratio were observed on ratiometric fluorescent images after H2O2 treatment. These results suggest that HyPer is a potent biosensor of the fast temporal production of intracellular H2O2.

[n order to obtain the trlle expected DNA prod uct from PCR and RT-PCR using genornic DNA or cDNA reversely transcribed from mRNA. the PCR should be done in an appropriated condition. Sometimes the PCR was repeatedly fail ed. and cventllally the PCR product was turned out to be nonspecific and rudimentary . And more‘ t he PCR prodllctwas not reproducible even though careflll repeat of experiments. As the PCR was based on the exact primel hybridization. the condition of primer hybridization should be properly controlled by a nnealing temperatllre. But the selection of primer seqllences for targeting a specific gene is mostly important. A new method of primer eval uation is now available llsing DNA base pair polarity program. This study presents an example of PCR targeting to human Bax gene using genomic DNA. The DNA base pair polarity theory can di vide the genetic cord into propel DNA segments and calclllaLe their DNA base pair hybridization energy. Thus. mathematically the degree 0(' exact primer hybridization can be expected for the t r1l8 targeting of PCR. However, the DNA base pair polal'ityanalysis demonstrates that the more frequent number of DNA segment incl'eased the specificity of PCR. but decreased its sensitivity . While the greater polarity of DNA segment composed of increased nllmber of polarized DNA base pairs showed increased sensitivi ty 0 1' PCR. bllt relati vely decreased specificity of PCR. With the mllltiple analysis of PCR. especially for PCR cloning from the gDNA and cDNA, we found that the primers themselves showed secondary strllcture of partial hybridization between sameprimers or each pair primers. The DNA base pail‘ polarity signal can directly demonstrated symmetric sequences 0 1' each primer. and also can distinguish the dimmer formation from each pair primers. At least the symmetric seqllence of fOlll‘ base pairs dramatically showed the dimrner formation. On the other hand. in addi tion Lo the statlls of DNA base pair polarity the three-dimensional strllctllre of DNA dOllble helix targeted by the primer seqllences may affect the sensitivity and specificity of PCR detection. The present study introduced a new method of primer evalllation and selection in order to obtain abundant and exacL! y-trlle DNA product for genomic ffilltation analysis and gene expression profï le

Diffuse involvement of the right pulmonary artery (PA) associated with fistula between the PA and coronary artery is report-ed in a woman with Takayasu’s arteritis. Both the subclavian arteries were totally occluded and drained by the meanderinged artery arising from both common carotid arteries. Lung perfusion scan revealed perfusion defect of right lung. Two fistulas were identified. A large fistula was between the right PA and left circumflex artery. A small fistula was between the right PA and left anterior descending artery. This is a rare case of Takayasu’s arteritis presenting with a coronary – pulmonary artery fistula that is secondary to a diffuse unilateral involvement of PA.