Al2O3 has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al2O3 powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al2O3 powders in practical applications. All powders exhibited α-Al2O3 as the main phase, with the presence of beta-phase Na2O-11Al2O3 as the secondary phase. The highest Na+ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. Highconcentration Al2O3 slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.

Porous ceramics have the advantages of low density, low thermal conductivity, and excellent mechanical properties. Among porous ceramic manufacturing methods, the replica template method allows the easy manufacturing of porous filters with the highest porosity and pores of the desired size, but it also has the disadvantage that the resulting filters have low mechanical strength. To overcome this shortcoming, mullite (3Al2O3·2SiO2) whiskers, which have excellent thermal stability and high mechanical strength, were introduced in porous ceramic structure. The mullite whiskers were synthesized using a composition of Al2O3, flyash and MoO3. The morphologies and crystal structures of the mullite whiskers with MoO3 contents were investigated in detail. When the porous ceramic with mullite whiskers was fabricated using 20 wt% MoO3 catalyst the most uniform microstructure was obtained, and the mullite whiskers showed the highest aspect ratio of 47.03. The porosity and compressive strength of the fabricated porous ceramic were 82.12% and 0.83 MPa, respectively.

사람 아이치바이러스 (Aichivirus A; AiV-A)는 positivesense single-strand RNA 비외피 바이러스로 지난 10년 동안 하수, 강, 지표 및 지상의 다양한 물환경에서 전 세계적으로 검출이 보고되고 있다. 지하수 등 물환경에서 AiV-A 진단을 위한 고감도 및 특이성이 우수한 방법의 개발이 요구됨에 따라, 본 연구에서는 기존 및 신규 설계된 프라이 머 세트를 기초로 역전사 (RT) 및 이중 중합효소연쇄반응이 가능한 조합을 개발하였다. 개발한 방법을 국내 음용 지하수 시료에 적용 및 평가하였으며, 그 결과 지하수 시료에서 AiV-A를 성공적으로 검출 및 동정할 수 있는 RTnested PCR primer sets가 선정되었고 후속적으로 동정할 수 있는 절차가 고안되었다. 본 연구 결과는 지하수 등 물 환경에서 AiV-A 오염을 탐지하기 위한 모니터링 시스템 마련에 기여할 것으로 기대된다.

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co3O4 and Al2O3. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

Used in the ceramic tile market as a representative building material, relief ceramic tile is showing increased demand recently. Since ceramic tiles are manufactured through a sintering process at over 1,000 oC after uniaxial compression molding by loading granule powders into a mold, it is very important to secure the flowability of granular powders in a mold having a relief pattern. In this study, kaolin, silica, and feldspar are used as starting materials to prepare granule powders by a spray dryer process; the surface of the granule powders is subject to hydrophobic treatment with various concentrations of stearic acid. The effect on the flowability of the granular powder according to the change of stearic acid concentration is confirmed by measuring the angle of repose, tap density, and compressibility, and the occurrence of cracks in the green body produced in the mold with the relief pattern is observed. Then, the green body is sintered by a fast firing process, and the water absorption, flexural strength, and durability are evaluated. The surface treatment of the granule powders with stearic acid improves the flowability of the granule powders, leading to a dense microstructure of the sintered body. Finally, the hydrophobic treatment of the granule powders makes it possible to manufacture relief ceramic tiles having a flexural strength of 292 N/cm, a water absorption of 0.91 %, and excellent mechanical durability

Recently, at-home workouts, which allows people to exercise easily and comfortably at home without going to the gym, has been in the spotlight. Accordingly, a lot of household equipment is produced, but weight exercise equipment is limited in use at home because of its heavy weight or volume. Therefore, this paper proposes a new form of exercise equipment that can be used at home by transforming the exercise equipment used in the fitness center. The proposed mechanism replaces the weight part of the strength exercise device, which is the key to weight control, with an electric motor. Three major muscle exercise instruments (long pull machine, curl cable machine, and let down machine) were analyzed by dynamic analysis using a multipurpose dynamic program (DAFUL). This shows that the proposed equipment can perform various sports. Therefore, the proposed mechanism is expected to be applicable at home, and this study is expected to be rapidly mass-produced by emphasizing practicality.

As water resources are limited and legal regulations are strengthened, there is a growing need to reuse residuals in WTP(Water Treatment Plant). In this study, membrane filtration system was constructed and its operation method was studied for water quality stabilization and reuse of WTP residuals. The operation parameters were stable for 1 year and 6 months. Membrane fouling was identified as particulate pollution (activated carbon) and inorganic pollution (manganese). The membrane system was operated steadily with raw water of high concentration SS(Suspended solid) containing activated carbon because membrane fouling was reduced by the effect of End-Free type. In the case of inorganic contamination, dissolved manganese eluted by chemicals and acted as a membrane fouling source, and the operating conditions for minimizing membrane fouling were confirmed by newly developing application methods and types of cleaning chemicals. Based on the results, design parameters for reducing manganese membrane fouling were derived.

Lilium dauricum is a rare and endangered species belonging to the family Liliaceae. The species contains several bioactive compounds used as functional foods and medicinal agents in Northeast Asia. This study aimed (1) to establish an in vitro bulblet culture using an air-lift bioreactor and callus culture for the conservation of L. dauricum and obtaining its bioactive compounds; (2) investigate the plant phenolic compounds from both cultures system. The highest bulblet production with 12.5-fold increase in growth rate was obtained using MS medium supplemented with 0.5 g L-1 BA and 3% sucrose. Addition of 7% sucrose facilitated bulblet enlargement, with approximate 2.5- and 7-fold increases in diameter and fresh weight, respectively. The highest rate of callus (100%) was obtained using a combination of 1.0 mg L-1 picloram and 0.5 mg L-1 Kinetin. The callus proliferation occurred on MS medium supplemented with 1.0 mg L-1 picloram, 0.25 mg L-1 kinetin, and 0.25 g L-1 casein hydrolysate. There was a significant difference in the total phenolic compound content of callus, which was 1.5-fold higher than that in the bulblets. These findings indicate a suitable system for optimizing both bulblet and callus culture of L. dauricum, therefore, providing useful bio-materials for industrial purposes and contributing to the conservation of this species.

In this study, the glass melting properties are evaluated to examine the possibility of using refused coal ore as replacement for ceramic materials. To fabricate the glass, refused coal ore with calcium carbonate and sodium carbonate in it (which are added as supplementary materials) is put into an alumina crucible, melted at 1,200 ~ 1,500℃ for 1 hr, and then annealed at 600℃ for 2 hrs. We fabricate a black colored glass. The properties of the glass are measured by XRD (X-ray diffractometry) and TG-DTA (thermogravimetry-differential thermal analysis). Glass samples manufactured at more than 1,300℃ with more than 60 % of refused coal ore are found by XRD to be non-crystalline in nature. In the case of the glass sample with 40 % of refused coal ore, from the sample melted at 1,200℃, a sodium aluminum phosphate peak, a disodium calcium silicate peak, and an unknown peak are observed. On the other hand, in the sample melted at 1,300℃, only the sodium aluminum phosphate peak and unknown peak are observed. And, peak changes that affect crystallization of the glass according to melting temperature are found. Therefore, it is concluded that glass with refused coal ore has good melting conditions at more than 1,200℃ and so can be applied to the construction field for materials such as glass tile, foamed glass panels, etc.

Ink-jet printing is a manufacturing process technology that directly prints a digitalized design pattern onto a substrate using a fine ink jetting system. In this study, environmentally friendly yellow aqueous ceramic ink is synthesized by mixture of distilled water, yellow ceramic pigment and additives for ink-jet printing. The graft polymer, which combines electrostatic repulsion and steric hindrance mechanism, is used as a surfactant for dispersion stability of aqueous ceramic ink. Synthesized ceramic ink with graft polymer surfactant shows better dispersion stability than did ceramic ink with PAA surfactant; synthesized ink also shows desirable ink-jet printability with the formation of a single ink droplet during printability test. Finally, ceramic ink printed on glass substrate and ceramic ink with graft polymer surfactant shows a high contact angle without surface treatment on glass substrate. Consequently, it is confirmed that the ceramic ink with graft polymer surfactant can achieve high printing resolution without additional surface treatment process.

This paper is concerned to develop a fluid pressure system for the control of artificial bladder urine discharge. The primary goal is to force the fluid into the space between the inner wall and the outer wall by using a pump in the artificial bladder having a double structure of inner and outer walls and to form the urine discharge pressure by the contraction of the bladder inner wall due to the movement of the fluid. The ANSYS_CFD analysis is used to confirm the delivery of fluid pressure in the artificial bladder model, and the ANSYS_FSI analysis is used to identify the deformation and internal pressure of the artificial bladder through the delivery of fluid pressure, and to identify the discharge of urine. As the design parameters of the modeling of the artificial bladder and the fluid flow field, the capacity of the flow field, and the pump pressure input value were selected.

Generally, ceramic tiles for building construction are manufactured by dry forming process using granular powders prepared by spray drying process after mixing and grinding of mineral raw materials. In recent years, as the demand for large ceramic tiles with natural texture has increased, the development of granule powders with high packing ratio and excellent flowability has become more important. In this study, ceramic tile granule powders are coated with hydrophobically treated silica nanoparticles. The effects of hydrophobic silica coating on the flowability of granule powders and the strength of the green body are investigated in detail. Silica nanoparticles are hydrophobically treated with GPTMS(3-glycidoxypropyl trimethoxy silane), which is an epoxy-based silane coupling agent. As the coating concentration increases, the angle of repose and the compressibility decrease. The tap density and flowability index increase after silica coating treatment. These results indicate that hydrophobic treatment can improve the flowability of the granular powder, and prevent cracking of green body at high pressure molding.

This paper deals with the stability of industrial robot arms with six axes and six degrees of freedom. The robot arm used was IRB120, a product of ABB company, which is used in the real industry, by using the commercial “DAFUL” which is a simulation program that can analyze the dynamic behavior. DAFUL was applied to the robot arm to control the motion by applying the load to the robot arm and then the structural analysis of the robot arm was performed during the analysis time. As a result of the analysis of the robot arm, the stress and displacement acting on the elliptic model and the acting torque and force were analyzed. Based on the analysis results, stability was checked with reference to IRB120 product catalog.

Heat treatment of metals is an necessary process for obtaining properties required for metals. However, the heat treatment sector is labor intensive enough to be classified as an unwanted sector. In particular, in the case of quenching during the heat treatment, in order to select the defective product due to the collision caused by the collision between the products when the product is dropped in the oil tank during the quenching process, the labor is not concentrated on the heat treatment as the main process, It is a fact that it is put in. In this paper, in order to solve the labor - intensive nature, this paper designed and tested prototype products for the selection of defective products during the heat treatment process of the ball stud. The ball stud inspection device is divided into two parts, a ball stud supply device and an inspection device, and describes the concept design and prototype production contents. The performance of the prototype was evaluated by examining 1000 samples with 5 items. The manufactured ball stud inspection system will contribute to the relaxation of the avoidance phenomenon of the heat treatment industry and contribute to the efficiency and competitiveness of the work.

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.