Background: Sperm quality and the number of sperm introduced into the uterus during artificial insemination (AI) are pivotal factors influencing pregnancy outcomes. However, there have been no reports on the relationship between sperm concentration at AI and sperm quality in Hanwoo cattle. In this study, we examined sperm quality and pregnancy rates after AI using sperm inseminated at different concentrations. Methods: We evaluated the motility, viability, and acrosomal membrane integrity of sperm at different concentrations (10, 15, 18, and 20 million sperm/straw) in 0.5-mL straws. Subsequently, we compared the pregnancy rates after AI with different sperm concentrations. Results: After freeze-thawing, sperm at the assessed concentrations showed similar viability and acrosomal membrane integrity. After AI, cattle in the 10 million group had significantly lower pregnancy rates compared to those in the 18 and 20 million groups. Conversely, there were no statistically significant variances observed between cattle in the 10 and 15 million groups. Conclusions: Sperm at concentrations of 10, 15, 18 and 20 million per straw exhibited comparable motility, viability, and acrosomal membrane integrity. However, a concentration of at least 18 million sperm per straw is required to achieve a consistent rate of pregnancy rate in Hanwoo cattle after AI.

토복령은 우수한 항균, 항산화, 항염증 효능을 가진 소재로 알려져 있다. 이러한 토복령(Smilax china)의 추출물의 기능성을 화장품에 적용하기 위한 기초연구로써 토복령에서 발견되는 플라보노이드인 quercetin, catechin, naringenin의 농도별 경피 투과 특성을 조사할 필요성이 있다. Marzulli의 정의에 적 용한 결과 케르세틴의 Kp 값은 0.1 mg/mL에서 "빠름"으로 분류되었고, 0.2 및 0.4 mg/mL에서 "보통"으로 분류되었다. 특히, 농도가 증가함에 따라 투과 속도가 감소하는 경향이 있었다. 나린제닌의 경우 Flux 값은 각각 0.1, 0.2 및 0.4 mg/mL 농도에서 0.69, 1.07 및 1.42 μg/hr/cm²이었으며, 해당 Kp 값은 각각 6.95, 5.34 및 3.56이었다. 나린제닌의 Kp 값은 모든 농도에서 "보통" 범주에 속하며, 케르세틴과 관찰된 것과 같이 농도가 높아짐에 따라 투과 속도가 감소하였다. 카테킨의 경우 Flux 값은 각각 0.1, 0.2 및 0.4 mg/mL 농도에서 0.75, 1.09 및 1.66 μg/hr/cm²이었으며, 해당 Kp 값은 각각 7.55, 5.46 및 4.16이었다. 카테킨의 Kp 값은 모든 농도에서 일관되게 "보통"으로 분류되었다. 여드름 저해능 및 항염증 효능이 우수 한 토복령 추출물의 유효성분인 quercetin, catechin, naringenin의 경피 투과 특성이 보통 이상으로 나타나 기능성 화장품에 사용할 수 있는 우수한 천연물 소재인 것을 확인할 수 있었다.

뒷흰가는줄무늬밤나방은 쌀, 밀, 옥수수와 같은 농작물에 피해를 주는 해충이다. 본 연구에서는 국내 뒷흰가는줄무늬밤나방의 미토콘드리아 게놈(15,314b)을 분석하였다. 13개의PCG와2개의 rRNA (13,376bp)를 연결한 서열을 사용한 계통발생 분석 결과, 뒷흰가는줄무늬밤나방과 멸 강나방 사이의 가장 높은 노드 수치로 자매분류군을 형성하였다. 밤나방상과(Noctuoidea)의 각 과(Noctuidae, Euteliidae, Nolidae, Erebidae 및 Notodontidae)들은 가장 높은 노드수치로 단계통을 형성하였다.

Background: Porcine pluripotent stem cells (pPSCs) would provide enormous potential for agriculture and biomedicine. However, authentic pPSCs have not established yet because standards for pPSCs-specific markers and culture conditions are not clear. Therefore, the present study reports comparative pluripotency characteristics in porcine induced pluripotent stem cells (piPSCs) derived from different viral transduction and reprogramming factors [Lenti-iPSCs (OSKM), Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM)]. Methods: Porcine fibroblasts were induced into Lenti-iPSCs (OSKM) and Lenti-iPSCs (OSKMNL) by using Lentiviral vector and Sev-iPSCs (OSKM) by using Sendaiviral vector. Expressions of endogenous or exogenous pluripotency-associated genes, surface marker and in vitro differentiation in between Lenti-piPSCs (OSKM), Lenti-iPSCs (OSKMNL) and Sev-piPSCs (OSKM) were compared. Results: Colonial morphology of Lenti-iPSCs (OSKMNL) closely resembles the naïve mouse embryonic stem cells colony for culture, whereas Sev-iPSCs (OSKM) colony is similar to the primed hESCs. Also, the activity of AP shows a distinct different in piPSCs (AP-positive (+) Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM), but AP-negative (-) LentiiPSCs (OSKM)). mRNAs expression of several marker genes (OCT-3/4, NANOG and SOX2) for pluripotency was increased in Lenti-iPSCs (OSKMNL) and Sev-iPSCs (OSKM), but Sev-iPSCs (OSKM). Interestingly, SSEA-1 of surface markers was expressed only in Sev-iPSCs (OSKM), whereas SSEA-4, Tra-1-60 and Tra-1-81 were positively expressed in Lenti-iPSCs (OSKMNL). Exogenous reprogramming factors continuously expressed in Lenti-iPSCs (OSKMNL) for passage 20, whereas Sev-iPSCs (OSKM) did not express any exogenous transcription factors. Finally, only Lenti-iPSCs (OSKMNL) express the three germ layers and primordial germ cells markers in aggregated EBs. Conclusions: These results indicate that the viral transduction system of reprograming factors into porcine differentiated cells display different pluripotency characteristics in piPSCs.

Aligned with the recent shift in fruit consumption trends, there is a growing increase in the cultivation of these fruits. Thus, various types of small fruits, including blueberries, have recently been introduced and cultivated in Korea. According to the data, there has been a notable uptick in blueberry farming, in stark contrast to the decline in cultivation of black raspberries, black chokeberries, and blackcurrants. New varieties of blueberries continue to be introduced and cultivated, aligning with the recent consumption trends and are expected to be consistently cultivated in the future. Despite the decrease in the other berries, health benefits associated with all berries have ignited growing consumer interest, resulting in domestic and international market expansion. In conclusion, this research underscores the importance of identifying plant varieties that are well-suited to Korea's climatic conditions, validating efficient cultivation strategies, and establishing robust distribution networks to foster sustainable development in the berry industry.

This study was conducted to develop a seed propagation protocol of Hemerocallis taxa native to the Korean Peninsula. In this study, the seed dormancy types were classified. The germination traits of H. thunbergii, H. dumortieri, H. hakuunensis, and H. hongdoensis were also characterized. The initial embryo to seed length ratio (E:S ratio) in seeds of the four Hemerocallis species was between 0.80 and 0.90 at harvest, however, the E:S ratio did not increase until just before germination. Thus, seeds of the four Hemerocallis species had no morphological dormancy (MD), and at least 84% of seeds of all tested species germinated at 25/15℃ under light within 30 days. The lower the incubation temperature, the lower the germination rate of seeds of the four Hemerocallis species. However, the temperature range for germination was expanded due to old stratification. Gibberellin treatment increased the germination rate or germination speed at a relatively low temperature of 15/6℃. However, this treatment did not improve the germination rate as much as the temperature at 25/15℃. Under 15/5℃ of incubation, cold stratification increased the final germination percentage and rate/speed and expanded the temperature range for germination from high to low (25/15℃ → 15/6℃). This indicates that the seeds have a conditional dormancy (CD) that germinates in a narrow temperature range. In conclusions, the four Hemerocallis seeds exhibited nondeep physiological dormancy.

Molten Salt Reactor, which employs molten salt mixture as fuel, has many advantages in reactor size and operation compared to conventional nuclear reactor. In developing Molten Salt Reactor, the behavior of fission product in operation should be preliminary evaluated for the correct design of reactor and its associated system including off-gas treatment. In this study, for 100 Mw 46 KCl- 54 UCl3 based Molten Salt Reactor with operating life time of 20 year, the fission product behavior was estimated by thermodynamic modeling employing FactSage 8.2. Total inventory of all fission product were firstly calculated using OpenMC code allowing depletion during neutronic calculation. Then, among all inventory, 46 element species from Uranium to Holmium were chosen and given to the input for equilibrium module of Factsage with its mass. In phase equilibrium calculation, for the correct description of solution phase, KCl-UCl3 solution database based on modified quasichemical model in the quadruplet approximation (ANL/CFCT-21/04) was employed and the coexisting solid phase was assumed to pure state. With the assumption of no oxygen and moisture ingress into reactor system, equilibrium calculation showed that 1% of solid phase and of gas phase were newly formed and, in gas phase, major species were identified : ZrCl4 (47%), Xe (33%), UCl4 (14%), Kr (5%), Ar (1%) and others. This result reveals that off-gas treatment of system should account for the appropriate treatment of ZrCl4 and UCl4 besides treatment of noble gas such as Xe and Kr.

In the decommissioning process of nuclear power plants, Ni-59, Ni-63 and Fe-55 present in radioactive waste are crucial radionuclides used as fundamental indicators in determining waste treatment methods. However, due to their low-energy emissions, the chemical separation of these two radionuclides is essential compared to others. Therefore, this study aims to evaluate the suitability of various pre-treatment methods for decommissioning waste materials by conducting characteristic assessments at each chemical separation stage. The goal is to find the most optimized pre-treatment method for the analysis of Ni-59, Ni-63 and Fe-55 in decommissioning waste. The comparative evaluation results confirm that the chemical separation procedures for Fe and Ni are very stable in terms of stepwise recovery rates and the removal of interfering radionuclides. However, decommissioning waste materials, which mainly consist of concrete, metals, etc., possess unique properties, and a significant portion may be low-radioactivity waste suitable for on-site disposal. Considering that the chemical behavior and reaction characteristics may vary at each chemical separation stage depending on the matrix properties of the materials, it is considered necessary to apply cascading chemical separation or develop and apply individual chemical separation methods. This should be done by verifying and validating their effectiveness on actual decommissioning waste materials.

The inorganic scintillator used in gamma spectroscopy must have good efficiency in converting the kinetic energy of charged particles into light as well as high light output and high light detection efficiency. Accordingly, various studies have been conducted to enhance the net-efficiency. One way to improve the light yield has been studied by coating scintillators with various nanoparticles, so that the scintillation light can undergo resonance on surface between scintillators and nanoparticles resulting in higher light yield. In this study, an inorganic scintillator coated with CsPbBr3 perovskite nanocrystals using dip coating technique was proposed to improve scintillation light yield. The experiment was carried out by measuring scintillation light output, as the result of interaction between inorganic scintillator coated with CsPbBr3 perovskite nanocrystals and gamma-ray emitted from Cs-137 gamma source. The experimental results show that the channel corresponding to 662 keV full energy peak in the Cs-137 spectrum shifted to the right by 14.37%. Further study will be conducted to investigate the detailed relationships between the scintillation light yield and the characteristics of coated perovskite nanoparticles, such as diameter of nanoparticles, coated area ratio and width of coated region.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

The presence of organic components in spent scintillation liquid should be considered during all steps of radioactive waste processing for final disposal. Scintillation liquids often referred to as cocktails are generated form radiochemical analyses of radionuclides, which mainly consists of mixtures of liquid organic materials such as toluene and xylene. Typical features of these liquid organic materials are volatility, combustibility and toxicity. These are the reason why special attention must be paid to the management of liquid organic radioactive wastes. To select an appropriate waste management strategy and to design the treatment process of spent scintillation cocktails, it is required to investigate the nature of the waste such as specific radioactivity and moisture content. The analysis results of spent scintillation liquid generated at Wolsong nuclear power plants will be discussed. An overview of the technical approaches available for the treatment of organic radioactive waste will be additionally provided.

Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.