Human and material resource planning is one representative example of Operations Research. Resource planning is important not only in civilian settings but also in military ones. In the Air Force, flight scheduling is one of the primary issues that must be addressed by the personnel who are connected to flight missions. However, although the topic is of great importance, relatively few studies have attempted to resolve the problem on a scientific basis. Each flight squadron has its own scheduling officers who manually draw up the flight schedules each day. While mistakes may not occur while drafting schedules, officers may experience difficulties in systematically adjusting to them. To increase efficiency in this context, this study proposes a mathematical model based on a binary variable. This model automatically drafts flight schedules considering pilot’s mission efficiency. Furthermore, it also recommends that schedules be drawn up monthly and updated weekly, rather than being drafted from scratch each day. This will enable easier control when taking the various relevant factors into account. The model incorporates several parameters, such as matching of the main pilots and co-pilots, turn around time, availability of pilots and aircraft, monthly requirements of each flight mission, and maximum/minimum number of sorties that would be flown per week. The optimal solution to this model demonstrated an average improvement of nearly 47% compared with other feasible solutions.

Graphene and Fe3O4 were bound by electrostatic attraction and prepared by effective reduction through microwave treatments. As a result of fabricating graphene with Fe3O4 as a composite material, it has been confirmed that it contributes to the structural improvement in graphene stabilization and at the same time, it shows improved electrochemical performance through improved charge transfer. It was also confirmed that the crystalline Fe3O4 was uniformly dispersed in the rGO sheet, effectively blocking the reaggregation due to the van der Waals interaction between the neighboring rGO sheets. The structural analysis of prepared composites was confirmed by transmission electron microscopy, and X-ray diffractometer. Electrochemical properties of composites were studied by cyclic voltammetry, galvanostatic charge–discharge curves, and electrochemical impedance spectroscopy. The Fe3O4 (0.4 M)/rGO composite showed a high specific capacitance of 972 F g−1 at the current density of 1 A g−1 in 6 M KOH electrolyte, which is higher than that of the pristine materials rGO (251 F g−1) and Fe3O4 (183 F g−1). Also, the prepared composites showed a very stable cyclic behavior at high current density, as well as an improvement in comparison with pristine materials in terms of resistance.

The Eurytoma maslovskii conduces the unexpected plum dropping. It stayed overwinter inside the pits of the dropped plums and able to oviposit on plum surface when the diameter of the plums are over 16 mm prior to endocarp hardening. To control this harmful pests is too much essential to plum orchard. Therefore, the plum seed crusher (PSC) was designed and developed according to the purpose of perishing the pests through destroying the dropped plums. The rocks and the weeds were removed from the plum orchard prior to the test. Manually operated plum seed crusher picked-up the dropped plums from the ground and crushed them. The performance of PSC was evaluated by applying 2.5 and 3.0 km/h travelling speeds, and controlling the gaps; 18, and 28 mm intervals between plum pick-up discs. The test result showed the plum pick-up rate was 98±2.0%, and 92±5.3% with the machine travelling speed of 3.0 km/h in laboratory. Further, it changed to 95±8.7%, and 93±5.8% when the travelling speed was used 2.5 km/h. In both cases of test plum pick-up discs were maintained 18 mm, and 28 mm gap intervals, respectively. Furthermore, in field conditions, pursuing to similar gap intervals, the plum pick-up rate was 94±4.0%, and 92±2.0% with the speed of 3.0 km/h albeit it showed 92±4.0%, and 90±3.5% when the speed was decreased to 2.5 km/h. The maximum plum pick-up rate was found at 18 mm disc intervals with 3.0 km/h travelling speeds. The crushing teeth were selected 8 mm in height by repeated test to destroy the plum seeds. The result showed 100% crushing efficiency was facilitated to entire tests at 280 RPM crushing speeds regardless of plum sizes and shapes. This machine is preferred for the farmers to control the damage of plums by preventing the propagation of the identified pests.

In this study, we developed ten microsatellite markers specific to L. angelina using the Illumina NextSeq 500 platform. Forty-three individuals of L. angelina collected from three localities in South Korea were genotyped to validate these markers and to preliminarily assess population genetic characteristics. The observed number of alleles, observed heterozygosity (HO), and expected heterozygosity (HE) at a locus ranged from 4–13, 0.211–0.950, and 0.659–0.871 in the population with the largest sample size (20 individuals), respectively, thereby validating the suitability of the markers for population analyses. Our preliminarily assessment of the population genetic characteristics indicates the presence of inbreeding in all populations, an isolation of the most geographically distant population (Seocheon), and lower HO than HE. The microsatellite markers developed in this study will be useful for studying the population genetics of L. angelina collected from additional sites in South Korea and from other regions. †These authors contributed equally to this paper.

본 연구는 지속가능한 유기농업의 실천을 위하여 국내 작부체계와 농업환경에 적합한 한국형 현장적용 기법을 구축하고자 수행하였다. 본 연구의 기본 개념은‘Natural Enemy in First (NE가 먼저)’로 해충 발생시기의 예찰 없이 주 작물을 정식함과 동시에 천적과 선발한 보조식물을 혼합 적용해서 해충발생 이전에 천적을 포장에 먼저 정착시키는 생물적 방제기법이다. 미끌애꽃노린재 서식처로 Portulaca sp.를, 콜레마니진디벌 서식처로 옥수수를 선발하여 시설 토마토에서 방제효과를 확인하였다. 미끌애꽃노린재 단독처리와 천적 서식처(Portulaca sp.) 혼합처리구에서 관행방제 처리구(약제처리)대비, 각각 82%, 73%의 총채벌레 밀도 억제 효과를 확인할 수 있었다. 진딧물의 경우, 모든 처리구에서 3줄기 당 평균 0.5마리 이하의 낮은 밀도를 유지하였다.

원자력발전소를 운영하게 되면 사용후핵연료와 같은 고준위방사성폐기물이 필연적으로 발생한다. 이러한 고준위방사성폐 기물을 처분하기 위해 심층처분방식이 가장 적합한 대안으로 알려져 있으며 고준위방사성폐기물은 공학적방벽과 천연방벽에 둘러 쌓여 지하 500~1,000 m 깊이의 심지층에 처분된다. 이 중 압축 벤토나이트 완충재는 공학적방벽의 가장 중요한 구성요소이다. 완충재는 처분용기와 자연 암반 사이에 위치해 있기에 주변 지하수 흐름으로부터 처분용기를 보호하고 처분 용기로부터 핵종이 유출되는 것을 저지하는 역할을 한다. 주변 지하수 흐름으로 인한 완충재의 불포화 함수특성 규명은 전체 공학적방벽의 성능을 평가하는데 있어 매우 중요하다고 할 수 있다. 따라서 본 연구에서는 실내 시험을 수행하여 국내 압축 벤토나이트 완충재의 건조밀도, 구속조건 여부, 그리고 건조 및 포화 이력에 따른 압축 벤토나이트 완충재의 함수특성곡선을 도출하여 분석하였다. 구속 조건하에서 건조밀도에 따른 함수특성곡선은 큰 차이를 보이지 않았다. 또한 비구속 조건이 구 속 조건에 비해 보다 큰 수분흡입력을 나타냈으며, 아울러 포화 과정보다 건조 과정에서 보다 큰 수분흡인력이 측정되었다.

We have studied a method to prepare polydopamine-modified reduced graphene oxide-supported Pt nanoparticles (Pt– PDA–RGO). The Pt–PDA–RGO nanocomposites were synthesized by a wet-coating process, which was induced by selfpolymerization of dopamine. As an eco-friendly and versatile adhesive source in nature, dopamine could be easily adhered to surfaces of organic material and inorganic material via polymerization processes and spontaneous adsorption under weak alkaline pH conditions. To apply the unique features of dopamine, we synthesized Pt–PDA–RGO nanocomposites with a different quantity of dopamine, which are expected to preserve the improved Pt adsorption on graphene, resulting in the enhanced electrocatalytic performance. The morphology and micro-structure were examined by field emission scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Compared to pristine Pt–deposited RGO (Pt–RGO), Pt–PDA–RGO (30 wt% dopamine against RGO) nanocomposites showed a superior electrochemical active surface area for a methanol oxidation. This could be related to the fact that the optimized c

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Recently, polymorphisms reported to be significant association with sperm MOT. This study was conducted to evaluate the SNP in the coding region of ESR1 (g.672C>T inexon 1) as a positional controlling for motility and kinematic characteristics of post-thawed boar semen. To results,The g.672C>T was significantly associated with frozen semen motility and kinematic characteristics. g.158 T>C SNP was high significantly associated with MOT, VCL, VSL and VAP Also, the SNP was low significantly associated with ALH.Therefore, we suggest that theSNP in the coding region of ESR1 (g.672C>T in exon 1) may be used as a molecular marker for Duroc boar Post-thawed semen quality.

Estrogen receptor 2 (ESR2) is involved in oestrogen-related apoptosis in cell cycle spermatogenesis but their effects have not yet confirmed in pig. Therefore, this study was performed to investigatetheir association with semen motility and kinematic characteristics. DNA samples from 126 Duroc pigs with records of sperm motility and kinematic characteristics [Total motile spermatozoa (MOT), Curvilinear velocity(VCL), Straight-line velocity(VSL), the ratio between VSL and VCL(LIN), Amplitude of Lateral Head displacement(ALH)] were used in present study. A single nucleotide polymorphism (g.35547A>G) was associated with MOT, VCL, VAP and ALH in Duroc population (p < 0.05). Therefore, we suggest that the porcine ESR2 may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not clear yet. These results will improve the understanding of the functions of the ESR2 in spermatogenesis within the reproductive tracts, and will shed light on ESR2 as a candidate gene in the selection of good sperm quality boars.

Cryopreservation of bovine embryos is used to efficiently implant surrogate mothers. It has been widely accepted that high lipid content in the oocyte interrupts its survival during freeze-thaw cycles. Serum component in the culture medium is thought to increase the embryo`s lipid contents. Conversely, L-carnitine stimulates lipid metabolism by transporting long chain fatty acids into the mitochondria. Objective of this study was to analyze the effect of L-carnitine supplementation in IVM medium and defined IVC medium on the development, lipid contents and the cryosurvival of bovine IVF embryos. 0.0, 1.5, 3.0 and 6.0 mM L-carnitine was supplemented in IVM medium, respectively (IVM-LC 0.0, LC 1.5, LC 3.0 and LC 6.0). Development rate from the 2cell to the morula stages was higher in IVM-LC 3.0 groups than those of IVM-LC 6.0 (p<0.05). But there were no significant differences among the other groups in the blastocyst rates and lipid content results. When 0.0, 1.5, 3.0 and 6.0 mM L-carnitine were supplemented in IVC medium (IVC-LC 0.0, LC 1.5, LC 3.0 and LC 6.0), development competence was not significantly different between those embryos. Lipid contents of embryos treated L-carnitine (IVC-LC 1.5, 3.0 and 6.0) were significantly lower than embryos of non-treated group. L-carnitine was supplemented 0.0, 1.5, 3.0, 6.0 mM during IVM and 3.0 mM during IVC (LC 0.0 - 3.0, LC 1.5 – 3.0, LC 3.0 – 3.0, LC 6.0 – 3.0) and cryosurvival of blastocysts confirmed after freezing-thawing. There were no significant differences on development, but LC 3.0 – 3.0 was significantly lower lipid contents than other groups. And LC 3.0 – 3.0 had better survival rates and hatched rates of blastocysts than LC 0.0 – 0.0. In conclusion, supplementation of L-carnitine in defined IVC medium decreases lipid contents. And L-carnitine supplementation improves cryosurvival and developmental ability of bovine IVF embryos.