Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The radiological characterization of SSCs (Structure, Systems and Components) plays one of the most important role for the decommissioning of KORI Unit-1 during the preparation periods. Generally, a regulatory body and laws relating to the decommissioning focus on the separation and appropriate disposal or storage of radiological waste including ILW (intermediate level waste), LLW (low level waste), VLLW (very low level waste) and CW (clearance waste), aligned with their contamination characteristics. The result of the preliminary radiological characterization of KORI Unit-1 indicated that, apart from neutron activated the RV (reactor vessel), RVI (reactor vessel internals), and BS (biological shielding concrete), the majorities of contamination were sorted to be less than LLW. Radiological contamination can be evaluated into two methods. Due to the difficulties of directly measuring contamination on the interior surfaces of the pipe, called CRUD, the assessment was implemented by modeling method, that is measuring contamination on the exterior surfaces of the pipes and calculating relative factors such as thickness and size. This indirect method may be affected by the surrounding radiation distribution, and only a few gamma nuclides can be measured. Therefore, it has limitation in terms of providing detailed nuclide information. Especially, α and β nuclides can only be estimated roughly by scaling factors, comparing their relative ratios with the existing gamma results. To overcome the limitation of indirect measurement, a destructive sampling method has been employed to assess the contamination of the systems and component. Samples are physically taken some parts of the systems or components and subsequently analyzed in the laboratory to evaluate detailed nuclides and total contamination. For the characterization of KORI Unit-1, we conducted the radiation measurement on the exterior surfaces of components using portable instruments (Eberline E-600 SPA3, Thermo G20-10, Thermo G10, Thermo FH40TG) at BR (boron recycle system) and SP (containment spray system) in primary system. Based on these results, the ProUCL program was employed to determine the destructive sample collection quantities based on statistical approach. The total of 5 and 8 destructive sample quantities were decided by program and successfully collected from the BR and SP systems, respectively. Samples were moved to laboratory and analyzed for the detail nuclide characteristics. The outcomes of this study are expected to serve as valuable information for estimating the types and quantities of radiological waste generated by decommissioning of KORI Unit-1.

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Recently, polymorphisms reported to be significant association with sperm MOT. This study was conducted to evaluate the SNP in the coding region of ESR1 (g.672C>T inexon 1) as a positional controlling for motility and kinematic characteristics of post-thawed boar semen. To results,The g.672C>T was significantly associated with frozen semen motility and kinematic characteristics. g.158 T>C SNP was high significantly associated with MOT, VCL, VSL and VAP Also, the SNP was low significantly associated with ALH.Therefore, we suggest that theSNP in the coding region of ESR1 (g.672C>T in exon 1) may be used as a molecular marker for Duroc boar Post-thawed semen quality.

Estrogen receptor 2 (ESR2) is involved in oestrogen-related apoptosis in cell cycle spermatogenesis but their effects have not yet confirmed in pig. Therefore, this study was performed to investigatetheir association with semen motility and kinematic characteristics. DNA samples from 126 Duroc pigs with records of sperm motility and kinematic characteristics [Total motile spermatozoa (MOT), Curvilinear velocity(VCL), Straight-line velocity(VSL), the ratio between VSL and VCL(LIN), Amplitude of Lateral Head displacement(ALH)] were used in present study. A single nucleotide polymorphism (g.35547A>G) was associated with MOT, VCL, VAP and ALH in Duroc population (p < 0.05). Therefore, we suggest that the porcine ESR2 may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not clear yet. These results will improve the understanding of the functions of the ESR2 in spermatogenesis within the reproductive tracts, and will shed light on ESR2 as a candidate gene in the selection of good sperm quality boars.

소나무재선충병의 나무주사는 살선충제를 중심으로 실시되어 왔으며, 매개충인 솔수염하늘소와 북방수염하늘소의 방제는 주로 항공방제나 지상방제를 통하여 이루어졌다. 본 연구에서는 나무주사를 통하여 매개충 (솔수염하늘소)을 방제하기 위한 연구로 Abamectin+Acetamiprid ME, Thiamethoxam DC 약제의 나무주사시 솔수염하늘소의 약효발현농도, 처리 후 기간별 효과(2017년~2018년)를 검토하였다. 실내 발현농도 시험에서는 Acetamiprid, Thiamethoxam LC50 value는 각각 0.102ppm, 0.083ppm 으로 나타 났으며, 야산(포장)에서 Abamectin+Acetamiprid ME, Thiamethoxam DC 처리구의 100.0% 치사 소요일 수는 처리 90일 후 11.0일, 9.4일, 처리 360일 후 11.6일, 10.0일로 나타나서 두 약제 모두 3월 처리시 다음해에 발생하는 매개충 (솔수염하늘소) 방제까지 가능함을 확인 할 수 있었다.

In the United States and Europe, new environmentally friendly asphalt pavement has been researched as an alternative to traditional hot asphalt pavement. After the Paris Convention of 2015, policies should be found to reduce carbon dioxide. In the field of asphalt pavement, new methods are needed to reduce carbon dioxide from the traditional hot asphalt pavement. In Korea, waste asphalt is growing and natural aggregate is running dry. So the government is implementing policies to increase the use of waste resources. So, it created a new asphalt pavement method to reduce CO2 and use waste asphalt. It is a cold recycled asphalt pavement. Emulsified asphalt has a balance of dispersibility, stability, and adhesive between water, aggregates, and asphalt. But, the physical properties of emulsified asphalt can be degraded compared to traditional hot asphalt pavement. So there are limitations in actual use. The study compared the softening point, elastic recovery, and penetration properties of asphalt mix compounds by using latex in emulsified asphalt. In particular, cations latex was used for the emulsified asphalt, which could further improve the physical properties.

In recent years, pavement distresses have been caused by diverse factors such as spalling, deterioration of repaired sections, blow-up, and alkali aggregate reaction due to changing climate environment of a concrete pavement and its construction and maintenance conditions (supply of materials, increase in use of de-icers, etc,). As a leading repair method for deteriorated concrete pavements, partial-depth repair is implemented in accordance with guidelines of material properties for joints of a concrete pavement and field application evaluation systems, but still some of the repaired sections become deteriorated again at an early stage due to poor construction quality and failure of response to environmental impacts. Distresses that can be corrected with partial-depth repairs are largely divided into those of repair materials and of the existing pavement bonded to repair materials, and combined distress of repair materials and the existing pavement. Although re-repair methods should be different by distress type and scale than conventional pavement repair methods, appropriate repair methods and guidance for re-repairs have not been in place so far, and therefore currently, re-repair practices follow the existing manual of partial depth repairs. Therefore, this study evaluated concrete bond characteristics by removing method and repair scope for an experimental section of frequently distressed pavements to determine a re-repair scope and method for deteriorated partial depth repair sections of concrete pavement, the number of which has increased over time.

우리나라는 1996년 WTO/SPS(동식물검역협정)에 따라 검역병해충제도를 정비하였으며, 해외병해충의 위험으로부 터 자국내 생물자원과 자연환경을 보호하기 위하여 다양한 노력을 하고 있다. 현재까지의 수입식물 검역과정에서 검출된 병해충을 분석한 결과 병해충 검출건수는 수입량이 늘어나면서 증가하는 추세이다(00년 6,233건 → 17년 12,749건). 하지만 식물의 수입 유형에 따라 곡류, 사료류 등 비재식용 식물의 경우 병해충 검출률은 07년 이후 감소하고 있으며(07년 9.8% → 17년 3.3%), 묘목류, 종자류 등 재식용 식물의 경우 11년 이후로 지속적으로 증가하고 있어(11년 7.9% → 17년 22.0%) 재식용 식물을 통한 해외 병해충의 유입 위험도가 가증되고 있는 상황이다. 따라서 우리는 검역본부에서 운영하고 있는 자체 전산시스템인 병해충정보시스템(PIS)을 이용하여 2000년 이후 식물검역과 정에서 발견된 병해충 검출동향과 수입 유형에 따른 검출동향을 비교분석하고, 2016년 대비 2017년 병해충 검출동향을 파악하였다.

Individual safety is a fundamental concern. People generally try to avoid danger or mishaps in the workplace, and to consider safety as a primary condition for satisfactory employment and agreeable shopping experiences. Organizations can assure that workers, clients, the public, and the environment perceive that they are in safe environments by providing highly secure services. Secure working environments and safety-focused human resource environments are essential antecedents to safe performance and outcomes. Dangerous workplace environments cause employees to feel stress and anxiety. Thus their performance decreases and accidents and injuries increase. Workplace safety is the most important factor influencing service and performance, especially for allowing frontline salespersons to focus on providing customer satisfaction. In this study of workplace safety, we apply the service quality dimension to examine its relationship with employee perceptions of job satisfaction and their related job performance. We discuss theoretical and practical implications based on the results.

Entomopathogenic fungi, widely distributed in nature, have been developed as biopesticides of agricultural pests. However, little is known about isolation method for obtaining a variety of highly virulent strains from the soil. In this work, the previously established method using mealworm (larvae of Tenebrio molitor) as a baiting system was used to efficiently isolate fungal strains from soil, and the isolated fungal library in Korea was established. To isolate entomopathogenic fungi, soil samples from 10 regions of Korea such as Iksan, Imsil, Gunsan, Yeosu, Suncheon, Gwangyang, Jinju, Hamyang, Boseong and Jangseong were collected. Of the collected soils, 21 and 34 isolates of entomopathogenic fungi were isolated from Iksan and Gunsan, respectively. The isolates were classified as genera of Metarhizium, Beauveria and Isaria. This work can suggest an effective insect pathogenic fungal isolation method

To clarify the role of stem cells in hepatocarcinogenesis, CD44 expression was investigated in mouse livers as well as embryonic cell lineages treated with diethylnitrosamine (DEN). Liver tumors induced by DEN were analyzed by immunohistochemisty for CD44. Liver tissues were sampled at 6, 24, and 48 hr after treatment with saline or DEN. Mouse embryonic stem cells (ESCs), hepatic progenitor cells (HPCs), and hepatocyte like cells (HCs), representing 0, 22, and 40 days of differentiation, respectively, were treated with DEN at four doses (0, 1, 5, and 15 mM, respectively) for 24 hr, after which CD44 expression levels were examined by relative quantitative real-time PCR. CD44 expression was weakly detected in tumor cells as well as in some hepatocytes surrounding the tumor cells. However, CD44 expression was not detected in liver tissue treated with DEN at early time points. The CD44 mRNA expression level was significantly different among cells treated with 5 mM DEN at day 22 (P<0.01) as well as 1, 5, and 15 mM DEN at day 40 (P<0.01) compared with control. Taken together, CD44 expression slightly increased in mouse DEN-induced tumors. Furthermore, expression of CD44 in embryonic cell lineages treated with various doses of DEN significantly differed among embryo stem cells and derived hepatic lineage cells. This suggests that CD44 expression may be modulated in the progeny of stem cells during their differentiation toward hepatocytes, and its expression may increase in the tumor stage but not during early carcinogenesis.

원자전달 라디칼 중합(ATRP)에 의해 poly(vinyl chloride) (PVC) 주사슬과 poly(styrene sulfonic acid) (PSSA) 곁사슬로 되어있는 양쪽성 PVC-g-PSSA 가지형 공중합체를 합성하였다. PVC-g-PSSA 가지형 공중합체 고분자를 템플레이트로 사용하고 졸겔법을 적용하여, 결정성 아타네제상의 미세기공 이산화티타튬 필름을 제조하였다. TiO2 전구체인 TTIP를 친수성인 PSSA 영역과 선택적으로 작용시켜 TiO2 메조기공 필름을 성장하였으며, 이를 주사전자 현미경 (SEM)과 엑스레이회절 (XRD)분석을 통해 분석하였다. 스핀코팅 횟수와 P25 도입에 따른 염료감응 태양전지 성능을 체계적으로 분석하였다. 그 결과 준고체 고분자 전해질을 이용하였을 때, 100 mW/㎠ 조건에서 에너지 변환 효율이 2.7%에 이르렀다.

원자전달 라디칼 중합(ATRP)에 의해 poly(vinyl chloride) (PVC) 주사슬과 poly(styrene sulfonic acid) (PSSA) 곁사슬로 되어있는 양쪽성 PVC-g-PSSA 가지형 공중합체를 합성하였다. 합성된 고분자 전해질막을 10 wt% AgNO3 수용액에 담가 은이온으로 이온교환을 하였으며, 환원제를 통하여 은 나노입자를 성장시켰다. UV분광학과 XRD 분석을 통해 은 나노입자 성장을 확인하였다. 투과전자현미경(TEM) 분석결과 NaBH4를 사용하였을 때 10~20 nm 크기의 은 나노입자를 얻는데 가장 효과적임을 알 수 있었다. 또한 은 나노입자의 성장은 환원제의 농도와 환원 시간에 크게 영향을 받았다.

A new spray chrysanthemum (Dendranthema grandiflorum) cultivar Peak was bred by crossing between GrandPink and Relance. Its growth and flower characteristics were investigated from 2002 to 2004 by shading culture in summer andretarding culture in spring.