뿌리응애류는 양파, 마늘, 생강, 백합 등의 뿌리를 가해한다. 최근 백합재배지에서는 질경이모자이크바이러 스(Plantago asiatica mosaic virus, PLAMV)에 의한 잎의 괴사 피해가 확산되고 있다. 태안 백합재배지에서 PlAMV 가 감염된 백합을 채집하여 구근을 조사한 결과, 식물체 당 뿌리응애 100개체 이상이 발견되었으며 Rhizoglyphus robini로 동정되었다. 이 종이 PlAMV의 보독여부를 확인하기 위해 채집된 R. robini에서 RNA를 추출하여 RT-PCR로 진단한 결과, 모든 개체에서 PlAMV가 확인되었다. 본 연구는 뿌리응애가 백합 구근 뿌리를 먹으면서 만든 상처를 통해 PlAMV가 전염될 수 있다는 가능성을 제시한다.

Cryptotympana atrata belongs to the family Cicadidae, has long been recognized as a damaging plant-sucking pest, and is distributed in East Asian countries. In addition, their cries cause direct harm to us through noise pollution and also reported twig damage in the forest environments. In this study, we isolated strains of the entomopathogenic fungus Metarhizium that occurred from C. atrata collected this year. Here, we provide the morphological character and molecular phylogenetic relationship of this species. This is the first record of the entomopathogenic fungus Metarhizium viridulum isolated from C. atrata in Korea and provides a candidate strain with potential use for biological agents.

The Korea Laboratory Accreditation Scheme (KOLAS) is the national accreditation body responsible for providing accreditation services to testing and calibration laboratories. The primary objective of KOLAS is to promote the quality and reliability of laboratory testing by providing nationally and internationally recognized accreditation services. Laboratories accredited by KOLAS are required to meet rigorous international standards set by the International Organization for Standardization (ISO) and are subject to regular assessments to ensure ongoing compliance with the standards. KOLAS accreditation is highly regarded both domestically and internationally, and is recognized for providing high-quality and reliable testing services. The nuclear analysis laboratory at KINAC has been working to establish a quality management system to ensure the external reliability of analytical results and to secure its position as an authorized testing agency. To achieve this, a detailed manual and procedure for nuclear material analysis were developed to conform to the international standards of ISO/IEC 17025. This study presents the preparation process for establishing the management system, focusing on meeting technical and quality requirements for the implementation of the ISO/IEC 17025 standard in the KINAC nuclear analysis laboratory, specifically in the field of chemical testing (dosimetry, radioactive, and neutron measurement subcategories). The preparation process involved two tracks. The first track focused on satisfying technical requirements, with Thermal Ionization Mass Spectrometer (TIMS) and Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) selected as the major equipment for analysis. Analytical methods for determining isotope ratios and concentrations of nuclear materials were determined, and technical qualification was ensured through participation in proficiency test programs, inter-experimenter comparison tests, and uncertainty reports. The second track focused on developing the quality system, including quality manuals, procedures, and guidelines based on the requirements of the ISO/IEC 17025 standard. Various implementation documents were produced during the six-month pilot period, in accordance with the three levels of documents required by the standard. Implementation of ISO/IEC 17025 is expected to have a systematic quality management process for the analysis lab’s operations and to increase confidence in KINAC’s nuclear analysis.

Ball stud parts are manufactured by a cold forging process, and fastening with other parts is secured through a head part cutting process. In order to improve process quality, stabilization of the forging quality of the head is given priority. To this end, in this study, a predictive model was developed for the purpose of improving forging quality. The prediction accuracy of the model based on 450 data sets acquired from the manufacturing site was low. As a result of gradually multiplying the data set based on FE simulation, it was expected that it would be possible to develop a predictive model with an accuracy of about 95%. It is essential to build automated labeling of forging load and dimensional data at manufacturing sites, and to apply a refinement algorithm for filtering data sets. Finally, in order to optimize the ball stud manufacturing process, it is necessary to develop a quality prediction model linked to the forging and cutting processes.

Phosphate coating is applied to the surface of the round bar material used in the multi-stage cold forging process for the purpose of lubrication. The film characteristics are determined according to the conditions of the phosphate film treatment process. In this study, the film properties according to the phosphate treatment conditions were defined as the coefficient of repeated friction and quantitative analysis was performed. Different friction behaviors were exhibited depending on the film properties, suggesting that optimization of the phosphate film treatment conditions is possible based on this. Finally, as a practical example, friction behavior according to the film characteristics was applied to the automotive engine bolt forming process. As a final conclusion, the need for linkage analysis with phosphating conditions for optimizing the forging process was raised. In addition, it can be seen that damage to the phosphate film should be considered in the process of predicting the limiting life of the die.

Most of automobile steering parts are manufactured through the multi-stage cold forging process using round-bar drawn materials. The same process is applied to the ball stud parts of the outer ball joint, and various research activities are being carried out to reduce the extreme manufacturing cost in order to survive in the limitless competition. In this paper, we present a quantitative prediction method for the limiting life of the die as a method for cost reduction in the multi-stage cold forging process. The load on the die was minimized by distributing the forming load based on process optimization through finite element analysis. In addition, based on the quantitative prediction algorithm of the limiting life of the die, the application of the split die and the optimization of the phosphate treatment of the material surface are presented as a conclusion as a method to improve the limiting life of the die.

A wire rod, a material for multistage cold forging, is subjected to spheroidization and low annealing heat treatment to secure formability, and a phosphate coating treatment on the material surface to secure lubricity. The film layer produced by the phosphate treatment process is involved in adhesion to the material surface, adhesion to the forging die surface, and lubricity. This results in the increase or decrease of the forming load and the increase or decrease of the die life in the cold forging process. In particular, as the cold forging process progresses, the phosphate film is damaged and the original performance is deteriorated, so there is a high possibility of process defects. In case of excessive damage, the film is completely lost and die soldering occurs. Therefore, in this study, quantitative criteria for phosphate film damage are presented and the effect on the cold forging process is analyzed based on this to improve process analysis prediction accuracy. Therefore, in this study, quantitative criteria for phosphate film damage are presented, and based on this, the friction coefficient in the multi-stage cold forging process is to be derived.

In this study, thirty-eight lactic acid bacteria (LAB) strains were isolated from Kimchi (Korean traditional fermented food) and screened for probiotic characterization in a series of in vitro tests, including resistance to low pH, tolerance to bile salts, hydrophobicity, antibiotic resistance and antioxidant activity. Firstly, twenty-two strains displayed survival in acid and bile passage conditions. Secondly, the strains KCCP 11349 and KCCP 11356 were observed to have high cell surface hydrophobicity with 63.9 and 98.8 %, respectively. Functionality of these potential probiotic isolates was supported by their antioxidant activity. Altogether, the strain KCCP 11349 showed characteristics similar to or even better than reference strain Lactobacillus rhamnosus GG. Finally, 16S rRNA gene sequencing was conducted to identify potential probiotic strains and KCCP 11349 was identified as Lactobacillus plantarum subsp. plantarum.

본 연구의 목적은 지역아동센터의 원예활동 프로그램 인식과 운영현황을 조사하여 향후 지역아동센터 원예활동 프로그램 발전을 위한 기초자료를 제공하는 것이다. 이를 위하여 충청남도 천안시에 위치한 지역아동센터 소장을 대상으로 2018년 2월 26일부터 2018년 3월 9일까지 방문, 이메일, 전화를 이용하여 설문조사를 실시하였다. 설문을 통해 수집된 자료는 SPSS 23.0 통계 프로그램을 사용하여 빈도분석, 다중응답분석을 실시하였다. 설문조사를 한 결과, 천안시의 지역아동센터 중 원예활동 프로그램을 실행해 본적이 있는 곳은 49%, 실행해보지 않은 곳은 51%로 나타났다. 실행해 본 적이 있는 곳 중 3개월 이상 프로그램을 진행한 센터는 40%에 불과했으며 주 1회, 1시간으로 복지원예사가 진행하였다. 지역아동센터에서 원예활동 프로그램을 시행하지 않은 가장 큰 이유는 ‘예산’이었다. 인지도를 살펴보면, 응답자 중 96.1%가 원예활동 프로그램이 필요하다고 생각하였으며 56.9%가 원예활동프로그램에 매우 관심이 있다고 답하였다. 원예활동 프로그램의 실행으로 지역아동센터가 아동에게 기대하는 효과로는, 정서안정과 사회성 발달에 도움이 될 것이라는 의견이 높게 나타났다. 위의 결과를 종합하여 보았을 때, 많은 소장이 원예활동 프로그램에 관심은 많지만, 일회성 프로그램으로 인식한다고 생각되어 원예활동 프로그램에 대한 정확한 이해와 교육이 필요하다고 사료되며, 앞으로 지역아동센터에서 프로그램을 진행할 때 ‘정서적 안정’과 ‘사회성 향상’을 목적으로 ‘주 1회’로 지속적인 운영을 할 수 있도록 지역아동센터의 예산확보와 원예활동에 대한 적극적인 홍보가 필요하다고 판단된다.

주로 열대와 아열대 지역에 분포하는 순모이리응애속(Euseius Wainstein) 응애류는 이리응애과(Phytoseiidae), 순이리응애아과(Amblyseiinae)에 속하며, 전세계적으로 193종이 보고되었다(Liao et al, 2017). 국내에는 순이리응애(E. finlandicus) 1종만이 기록되어 있다(Ryu, 2012). 잎응애류의 자생 천적자원 탐색조사 도중 본 속의 울릉도산 한국미기록종인 Euseius australis (Wu & Li, 1983)를 새롭게 확인하여 보고한다.