검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 143

        3.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 중공사형 이산화탄소 분리막 모듈을 사용하여 수소개질기 배가스로부터 이산화탄소 포집을 목적 으로 한 분리막 공정 최적화 연구를 진행하였다. 랩스케일의 소형 분리막 모듈을 사용하여 혼합기체를 대상으로 이산화탄소 순도 90% 및 회수율 90%을 달성하는 2단 공정 조건을 도출하였다. 막 면적이 정해진 모듈의 분리막 공정에서는 스테이지-컷, 주입부 및 투과부 압력에 따라서 포집 순도 및 회수율이 모두 다르게 나타나기 때문에 운전 조건에 대한 최적화가 필수적이 다. 본 연구에서는 다양한 운전 조건에서 1단 분리막에서 보이는 공정 포집 효율의 한계를 확인하고, 높은 순도와 회수율을 동시에 달성하기 위한 2단 회수 공정을 최적화하였다.
        4,000원
        4.
        2023.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study selected two labor-intensive processes in harsh environments among domestic food production processes. It analyzed their improvement effectiveness using 3-dimensional (3D) simulation. The selected processes were the “frozen storage source transfer and dismantling process” (Case 1) and the “heavily loaded box transfer process” (Case 2). The layout, process sequence, man-hours, and output of each process were measured during a visit to a real food manufacturing factory. Based on the data measured, the 3D simulation model was visually analyzed to evaluate the operational processes. The number of workers, work rate, and throughput were also used as comparison and verification indicators before and after the improvement. The throughput of Case 1 and Case 2 increased by 44.8% and 69.7%, respectively, compared to the previous one, while the utilization rate showed high values despite the decrease, confirming that the actual selected process alone is a high-fatigue and high-risk process for workers. As a result of this study, it was determined that 3D simulation can provide a visual comparison to assess whether the actual process improvement has been accurately designed and implemented. Additionally, it was confirmed that preliminary verification of the process improvement is achievable.
        4,000원
        9.
        2023.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, in the case of the root industry, although it is a basic industry that forms the basis of manufacturing competitiveness, there continues to be a shortage of manpower due to reasons such as dangerous working environments, industrial economic difficulties, and low wage systems. In addition, the demand for automation of production lines using robots is increasing due to a shrinking labor market due to a decrease in the working population due to aging, higher wages, shorter working hours, and limitations of foreign workers. In this study, a system was developed to automate the injection molding process for producing ball valves for automobiles by applying robot system. The applied process flow consists of alignment and insertion of insert parts, and removal, transfer, and loading of the product after injection molding, which is currently performed manually. Through the application of the developed robot automation system, the cycle time was improved by more than 30% and the defect rate was reduced by more than 70%.
        4,000원
        10.
        2023.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        일반적으로 지황[Rehmannia glutinosa (Gaertn.) Libosch ex Steud.]은 플러그 묘를 사용하지 않고 노지에 파종한다. 플 러그 묘는 발아 촉진과 이식이 편리한 장점이 있다. 그러나 지 황의 플러그 육묘를 이용한 번식에 관한 연구는 미흡한 실정 이다. 본 연구는 공정육묘 방법 확립을 위한 지황의 최적 종근 길이, 굵기 및 파종 방향을 조사하기 위해 수행되었다. 종근의 길이는 1, 2, 3cm로 구분하였고, 굵기는 각각 0.3-0.5, 0.6- 1.0, 1.1-1.5cm로 구분하였다. 그리고 종근은 수직 및 수평 방향으로 파종하였다. 종근 길이 1cm 처리에서 생존율이 유 의적으로 낮았다. 엽장, 엽폭, 엽수, SPAD, 엽면적, 지상부와 지하부의 생체중 및 건물중은 3cm 길이에서 가장 높았다. 지 황의 종근 굵기가 감소할수록 묘의 생육이 증가하는 경향을 보였다. 지황의 종근을 수평 방향으로 파종하였을 때 엽장, 엽 폭, 엽수, 엽면적은 수직 방향보다 유의하게 높았다. 결론적으 로 지황 종근을 플러그 트레이 파종할 때, 길이 3cm로 절단한 뒤 굵기 1.0cm 이하의 종근을 수평 방향으로 파종하는 것이 적절한 방법으로 판단된다.
        4,000원
        12.
        2023.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Metal material production process machinery is becoming larger due to the development of industry. Since there are many overseas manufacturers of large machines used in industrial fields, there are limitations in investigating the manufacturer's noise prediction method and measurement method. A noise map was prepared to obtain information necessary for noise reduction and to effectively manage noise companies. It was modeled with the drawings provided to prepare the noise map and the results of the actual measurement of the site. In order to improve the noise environment of workers, there was a noise reduction effect when a soundproof wall was installed between the noise source and the worker's workplace.
        4,000원
        13.
        2023.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to apply to high-nickel cathodes for high-capacity and stability enhancement of lithium-ion batteries, the characteristics of the coating film were reviewed using the conventional nickel plating method. The surface morphology of the plating layer and the measurement of the surface roughness were analyzed according to scan size and rate using the contact mode of Atomic Force Microscopy. The hydrogen ion concentration (pH) of the electrolyte played an important role in shaping the metal ion plating. As the overpotential of the surface increased during plating, the crystals grew in a direction other than the main crystal growth direction. The increase in on-time during pulse plating appears to result in coarse particles as much of the applied current is consumed by the reduction of hydrogen ions, resulting in lower current efficiency. From the AFM image, it was confirmed that the blackening of the plated film was due to a partial overvoltage phenomenon during electrolytic degreasing. In order to be used as a high-nickel cathode, it seems that the current must be uniformly distributed on the surface of the substrate during plating.
        4,000원
        14.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : In this study, emissions from asphalt mixture production and construction processes are calculated and used to estimate the emission from each asphalt pavement layer. The calculated emissions for the processes are used as fundamental data to estimate the total emission from the entire life cycle of pavement engineering in South Korea. METHODS : A design proposal and the Korean standard, which provide quantitative information for activities, were used to estimate the amount of construction materials and energy consumption. Subsequently, the LCI DB from NAPA and the LCIA DB from EPA were utilized in conjunction with the estimated quantity to assess the effect of the emissions to determine their environmental impact categories. RESULTS : Calculation results show that 5.84 million ton of CO2eq is discharged from production and construction processes, whereas 3.24 million ton of CO2eq is discharged from operation processes in the pavement engineering sector. The total GHG emission, i.e., 9.08 million ton of CO2eq, is approximately 1.25% of the national GHG emission in 2018. The asphalt mixture production process results in the highest GHG emission in the life cycle of asphalt pavements. CONCLUSIONS : An LCI DB that accounts for the industrial characteristics of South Korea must be established to provide more reliable emission data to be used for national GHG reduction plans, including those for the pavement engineering sector.
        4,000원
        17.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The existing production and manufacturing process was manually operated and the cleaning process was not constant due to poor environmental conditions for several hours, so the production efficiency was significantly lowered and manufacturing cost was increased. In this R&D, productivity improved by doubling the production of 300 units per hour to 700 units, and in this development, manufacturing costs were lowered through this process improvement project based on automotive shoba automation technology.
        4,000원
        18.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Although probiotics have been shown to improve health when consumed, recent studies have reported that they can cause unwanted side effects due to bacterial-human interactions. Therefore, the importance of prebiotics that can form beneficial microbiome in the gut has been emphasized. This study isolated and identified bacteria capable of producing biopoymer as a candidate prebiotic from traditional fermented foods. The isolated and identified strain was named WCYSK01 (Wissella sp. strain YSK01). The composition of the medium for culturing this strain was prepared by dissolving 3 g K2HPO4, 0.2 g MgSO4, 0.05 g CaCl2, 0.1 g NaCl in 1 L of distilled water. The LMBP(low molecular weight biopoymers) produced when fermentation was performed with sucrose and maltose as substrates were mainly consisted of DP3 (degree of polymer; isomaltotriose), DP4 (isomaltotetraose), DP5 (isomaltopentaose), and DP6 (isomaltoheptaose). The optimization of LMBP (low molecular weight of biopolymer) production was performed using the response surface methodology. The fermentation process temperature range of 18 to 32oC, the fermentation medium pH in the range of 5.1 to 7.9. The yield of LMBP production by the strain was found to be significantly affected by q fermentation temperature and pH. The optimal fermentation conditions were found at the normal point, and the production yield was more than 75% at pH 7.5 and temperature of 23oC.
        4,300원
        19.
        2022.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study investigated the method of continuous improvement of small-medium company production processes through POSCO's QSS(Quick Six Sigma) activities. QSS is a field operation technique that encompasses the advantages of Six Sigma, TPS(Toyota Production System), TQM (Total Quality Management), and IE(Industrial Engineering). Through this, POSCO not only encourages activities centered on related small and medium-sized partners, etc., but is also expected to contribute to the continuous improvement of the company's own production process through QSS activities. In this study, rather than unconditionally carrying out activities according to the needs of large companies, the research is to help the continuous improvement of the actual production process of small and medium-sized enterprises by effectively applying and spreading QSS activities in consideration of the characteristics and environment of the company. For this purpose, empirical research is conducted on the process improvement activities and QSS activities of company Y, which has less than 100 assembly and production quality and inspection processes among SMEs. The changes in the production process improvement of SMEs through the application of the final QSS were investigated through empirical studies.
        4,200원
        1 2 3 4 5