본 논문은 宋代 瓷器에 보이는 嬰戱紋의 시기별, 소재별 유형과 金과 高麗로 전파된 이 후 수용과 변화된 양상을 파악하고자 하였으며 이를 위해 자기 뿐만 아니라 회화, 금은기 등 과의 비교를 시도하였다. 영희문은 아이가 놀고 있는 모습을 나타내는 문양으로, 南北朝時代 금속기에서 처음 보 이기 시작한 이후 唐代 長沙窯에서 자기의 장식요소로 처음 사용되기 시작하였다. 송대에 이르면 南ㆍ北方 여러 窯址에서 자기장식요소로 활발히 제작되기 시작하며 다양한 소재와 결합되는 양상이 나타난다. 송대 영희문이 다수 확인되는 耀州窯와 定窯, 磁州窯, 景德鎭窯 등을 중심으로 시기별 변화 확인을 통해 송대 전기에는 거의 확인되지 않던 영희문이 중기에 이르러 북방지역의 요 주요와 남방지역의 경덕진요에서 등장하기 시작한다. 이후 송대 후기부터 요주요를 중심으로 도상과 소재가 다채로워지기 시작하였으며, 북송말-남송초에는 영희문이 확산되어 많은 요 지에서 제작되기 시작한 것으로 보인다. 이렇게 확인되는 송대 영희문은 결합되는 소재에 따 라 화훼, 과실, 불교, 민간생활로 나누어 볼 수 있으며, 營造法式과 같이 관에서 반포한 서적의 보급과 함께 多子多孫, 子孫蕃盛 등의 의미를 담고 있음을 알 수 있었다. 송대 영희문의 확산과정에서 금과 고려도 영향을 받아 영희문 자기를 제작하게 되는데, 금은 결합된 양상과 구성에서 북송대와 유사한 것을 확인할 수 있었다. 그러나 자주요에서 북방 민족의 복식으로 변화되는 양상이 확인되며, 이와 함께 당시 ‘百子圖’, ‘嬰戱圖’ 등의 회화에서 확인되는 아이들의 유희소재가 단독으로 나타난다. 고려에서는 12세기 중반 이후부터 영희문 자기가 제작되기 시작하며, 결합 소재와 아이 의 복식 양상을 통해 요주요의 영향을 받은 이후 정요의 영향을 받았던 것으로 보여진다. 고 려 영희문 자기는 크게 넝쿨과의 결합구성, 단독소재 구성, 회화식 구성으로 나누어 볼 수 있으며, 그중 회화식 구성은 송대 회화의 영향과 함께 남송대 금은기의 영향을 받았을 가능 성을 파악할 수 있었다.

The automatic dust separator is a device installed in the suction tank of the pumping or drainage plant, and prevents foreign substances such as aquatic plants or wood chips from being sucked into the underwater pump. Since the dust separator obstructs the flow of water for separating dusts, a water level difference is likely to occur before and after the dust separator. Since the water level difference before and after the dust separator acts as an additional hydraulic load on the dust separator structure, it may reduce the lifetime of the dust separator and cause damage. In this study, in order to reduce the water level difference, we devised changing the existing I-beam-shaped dust separator parts to a streamlined shape, and quantitatively analyzed the water level difference before and after the dust separator, hydraulic load, and flow velocity distribution through computational fluid analysis to confirm the effect of design improvement.

Gas turbine engines are widely used as prime movers of generator and propulsion system in warships. This study addresses the problem of designing a DS-based PID controller for speed control of the LM-2500 gas turbine engine used for propulsion in warships. To this end, we first derive a dynamic model of the LM-2500 using actual sea trail data. Next, the PRC (process reaction curve) method is used to approximate the first-order plus time delay (FOPTD) model, and the DS-based PID controller design technique is proposed according to approximation of the time delay term. The proposed controller conducts set-point tracking simulation using MATLAB (2016b), and evaluates and compares the performance index with the existing control methods. As a result of simulation at each operating point, the proposed controller showed the smallest in , which means that the rpm does not change rapidly. In addition, IAE and IAC were also the smallest, showing the best result in error performance and controller effort.

2005년 한국에 공공디자인이 도입되고 2016년 ‘공공디자인 진흥에 관한 법률’이 제정되 었다. 2018년 5월에는 정부 관계부처가 합동으로 제1차 공공디자인 진흥종합계획 (2018~2022)을 수립하고 정부가 방향성을 가지고 공공디자인을 진흥할 수 있게 되었다. 제 1차 공공디자인 진흥 종합계획이 수립된 이후 지방자치단체들은 공공 디자인의 진흥 및 통 합관리를 위해 필요한 시책을 수립․시행하고, 필요한 재원의 확 충과 운영을 위해 노력하고 있다. 최상위 행정구역인 8개도를 대상으로 각 도가 수립한 공공디자인 진흥계획을 살펴보 고 공통된 진흥 방향과 각 지역의 특징에 따른 차이점을 분석해본 결과, 첫 번째는 제1차 공공디자인 진흥 종합계획의 전략 방향의 큰 틀을 따르면서도 각 지역의 특성에 맞게 전략 과 세부과제를 재배치하고 다른 명칭을 사용하고 있다는 점이다. 두 번째는 지역의 지리적, 환경적 특성을 고려한 전략과 세부과제를 수립했다는 점이다. 세 번째는 지역민과 행정에 관한 전략과 세부과제를 강화하고 있다는 점이다. 이를 통해 아직 공공다자인 진흥계획을 수립하지 않은 지자체나 진흥계획 수립 후 5년이 경과된 지자체에 공공디자인 진흥 방향 설정에 도움을 주고 2차 공공디자인 진흥 종합계획의 새로운 방향성과 시사점 그리고 개선 점을 제시할 수 있으리라 기대한다.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament automation facilities for mass production were dealted with.

생물환경조절학회지 31권 4호에 게재된 논문의 사사가 잘못 기재되어 있어 바로 잡습니다.

The external weather conditions including temperature and wind speed in the Saemangeum reclaimed land is different from that of the inland, affecting the internal environment of the greenhouse. Therefore, it is important to select an appropriate covering material considering the insulation effect according to the type and characteristics of the covering material considering the weather condition in the Saemangeum reclaimed land. A hexahedral insulation chamber was designed to evaluate the insulation efficiency of each glass-clad material in the outside weather condition in reclaimed land. In order to evaluate the insulation effect of each covering material, a radiator was installed and real-time power consumption was monitored. 16-mm PC (polycarbonate), 16-mm PMMA (polymethyl methacrylate), 4-mm greenhouse glass, and 16-mm double-layered glass were used as the covering materials of the chamber. In order to understand the effect of the external wind directions, the windward and downwind insulation properties were evaluated. As a result of comparing the thermal insulation effect of each greenhouse cover material to single-layer glass, the thermal insulation effect of double-layer glass was 16.9% higher, while PMMA and PC were 62.5% and 131.2% higher respectively. On average the wind speed on the windward side was 53.1% higher than that on the lee-wind side, and the temperature difference between the inside and outside of the chamber at the wind ward side was found to be 52.0% larger than that on the lee ward side. During the experiment period, the overall heating operation time for PC was 39.2% lower compared to other insulation materials. Showing highest energy efficiency, and compared to PC, single-layer glass power consumption was 37.4% higher.

The purpose of this study is to apply the traditional Chinese fretwork on the ‘Faux Chenille’ textile work method in a way of enhancing the decorative features of patterns and developing the fashion design. As for the method, it works on the historic background and advancement of the fretwork and it refers to the bibliographies pertinent to the traditional Chinese geometric pattern. The result are as follows. First, pure cotton and 100% rayon are mixed to make it feasible to produce the texture for the material to be tender and enhanced, and in the process of washing and drying the Faux Chenille textile. The Faux Chenille textile is an important material that is required to select materials with great absorption capability as the most effective material to re-visualize the lines and patterns by sustaining the diagonal lines. Second, the fretwork is designed to process the basic formation for 90° angle with the sense of unlimited extensive line and changes with straight line. It has been confirmed that, if the angle that controls the Faux Chenille textile and the tailoring interval are well aligned, the expression of traditional geometric pattern would be effective and it may be expressed in contemporary style. Third, through the fashion design application by utilizing the Faux Chenille textile of the fretwork, it is confirmed that the contemporary application of the traditional culture could be expressed uniquely and creatively while it is affirmed that the western technique and Asian culture can be blended in harmony.

The environment has increasingly attracted attention and fashion brands need to use new growth models by developing eco-friendly products, along with the drastic climate change. This study drew design guidelines from the factors of clothing disposal and reuse to propose ways to extend the longevity of clothing. It sets the design goals for the longevity extension of clothing as flexibility, originality, durability, and adjustability and drew a specific design guideline. The design methods used to achieve such goals are as follows. First, the design that is flexible in terms of physical changes needs to increase its activity and to be changeable, by applying pleats, rubber bands and elastic materials to the parts with many physical changes and movements. Second, it is necessary to reinforce the brand identity, create design that is flexible in terms of fashion and design very rare and attractive products, for the goal of original design beyond fashion. Third, it is necessary to increase the quality of clothing and improve the durability which can be decreased by washing and wearing. Fourth, it is necessary to create the design that can produce various styles, preserve the state of clothing and maintain its hygienic conditions by using removable detailed designs, shape-transformation designs and the designs which can be adjusted to climate changes and states, for the goal of adjustable design with better functionality. The findings provide ideas for fashion experts to pay more attention to the extending the longevity of clothing products and to develop eco-friendly designs and strategies.

국내 Y정수처리시설에 20-40 m3/m2/h의 표면부하율을 갖는 고속 용존공기부상공정을 도입하였다. 우선, 용존공기부상공정과 입상활성탄 공정이 결합된 반응기를 일처리용량 500 m3/day의 조건으로 운전하였다. 운전결과는 두 공정이 원수내 탁도, 조류, 지오스민, 2-MIB를 감소시킬 수 있음을 증명하였다. 도출된 최적 설계요소를 활용하여 현장규모의 공정(5,000 m3/day)에 용존공기부상공정을 도입하였다. 여름철 56일간 조류와 탁도 제거율을 평가하였다. 처리수 내 조류의 개체수는 20-30 cells/mL 이하로 유지되었으며, 조류 제거효율은 80-89%를 기록하였다. 침전법 및 용존공기부상공정 처리수질의 탁도 제거효율을 비교한 결과 평균 탁도 제거효율은 77%를 나타냈다. 이러한 결과들은 고속 용존공기부상공정이 여름철 음용수의 탁도 및 조류와 같은 저밀도 고형물을 제거하는데 유의미한 방법임을 나타냈으며, GAC는 맛･냄새를 유발하는 화합물(지오스민, 2-MIB)를 제거할 수 있는 공정 옵션인 것을 확인하였다.

Recently, as interest in safe food and ingredient content has increased, the demand for highly concentrated health functional food that can be manufactured at home is increasing. Accordingly, in this study, we developed a galenic maker that can increase the extraction efficiency of herbal medicine(ginseng) ingredients and shorten the manufacturing time. After verifying the safety of the designed components through structural analysis and thermal flow analysis, the dimensions and shape of the galenic maker were determined. A prototype was produced based on the design process and the performance of the product was verified through extraction efficiency and ingredient analysis.

본 논문에서는 AI 기반 설계 탐색 기법을 활용하여 선박의 주요 치수 최적화를 수행하였다. 설계 탐색 기법은 최적화 프로그램 HEEDS의 SHERPA 알고리즘을 사용하였다. 유동 해석은 상용 CFD 코드인 STAR-CCM+를 사용하였고, 주요 치수 변환은 전처리 과정에서 JAVA Script와 Python을 사용하여 선박의 치수가 자동으로 변환되도록 설정하였다. 대상 선박은 소형 쌍동선형으로 주요 치수 최적화는 한쪽 선형의 길이, 폭, 흘수 그리고 단동선형 간의 간격에 대하여 수행되었다. 최적화 알고리즘에 사용된 목적함수는 총저항이며, 내부 의 장 시스템의 크기 등을 고려한 배수 체적의 범위를 제한조건으로 선정하였다. 그 결과 최적 선형의 주요 치수는 기존 선형 대비 ±5% 내 에서 변화가 있었고 총저항은 약 11% 개선된 결과를 보였다. 본 연구를 통해 선박의 형상을 직접 변경하지 않더라도 주요 치수 최적화를 통해 선박의 저항 성능이 향상됨을 확인하였고, 다양한 선박의 주요 치수 최적화를 통한 성능 향상에 활용이 될 것으로 기대한다.

로터 블레이드는 조류발전 터빈의 매우 중요한 구성 요소로서, 해수의 높은 밀도로 인해 큰 추력(Trust force)와 하중(Load)의 영 향을 받는다. 따라서 블레이드의 형상 및 구조 설계를 통한 성능과 복합소재를 적용한 블레이드의 구조적 안전성을 반드시 확보해야 한 다. 본 연구에서는 블레이드 설계 기법인 BEM(Blade Element Momentum) 이론을 이용해 1MW급 대형 터빈 블레이드를 설계하였으며, 터빈 블레이드의 재료는 강화섬유 중의 하나인 GFRP(Glass Fiber Reinforced Plastics)를 기본으로 CFRP(Carbon Fiber Reinforced Plastics)를 샌드위치 구조에 적용해 블레이드 단면을 적층(Lay-up)하였다. 또한 유동의 변화에 따른 구조적 안전성을 평가하기 위해 유체-구조 연성해석 (Fluid-Structure Interactive Analysis, FSI) 기법을 이용한 선형적 탄성범위 안의 정적 하중해석을 수행하였으며, 블레이드의 팁 변형량, 변형 률, 파손지수를 분석해 구조적 안전성을 평가하였다. 결과적으로, CFRP가 적용된 Model-B의 경우 팁 변형량과 블레이드의 중량을 감소시 켰으며, 파손지수 IRF(Inverse Reserce Factor)가 Model-A의 3.0*Vr를 제외한 모든 하중 영역에서 1.0 이하를 지시해 안전성을 확보할 수 있었 다. 향후 블레이드의 재료변경과 적층 패턴의 재설계뿐 아니라 다양한 파손이론을 적용해 구조건전성을 평가할 예정이다.

This study chiefly aims to clarify efficient methods considering behavioral pattern of refugees in multi-use facilities which can be applied to architectural planning. Accordance with COVID-19 situation, it is mandatory to check the temperature of visitors as a measure for the prevention of COVID-19 in multiuser facilities. When disaster occurs, for people in multi-use facilities such as medical facilities, museum, concert hall etc, it is difficult to find out short and right route to outside since the spatial characteristics are not familiar to visitors. If we design floor plans and circulation system considering behavioral pattern of refugees we can prevent the spread of disasters when they happen.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly design and manufacturing of facilities for making electron beam filament were dealted with.

In this study, We designated the injection molded plug housing for charging electric vehicles as a research subject. And we analyzed the effect of Rib design on the quality of injection molded products. First, we used the Taguchi method to derive optimal conditions for rib design. The factors were set as the Thickness of the rib, the Height of the rib, and the Radius of the rib. Each factor consisted of 5 levels and generated conditions for a total of 125. We performed an injection molding analysis and confirmed significant factors affecting the deformation of injection molded products through ANOVA. Based on this, the 25th design detail was selected as the optimal condition. In addition, We compared the results of the molding analysis with the molded products that did not design ribs. We confirmed that the molded product designed with ribs under optimal design detail improved the deformation amount by 22.22% and the residual stress by 8.35%, compared to the molded product not designed with ribs.

Controller modeling is essential for the design. It allows various control techniques to be simulated in advance, and various interpretations can be performed. If this is not the case, we need to reverse engineering in the real system developed by others. In this paper, controller modeling was reversely designed using the frequency test results of the target system. First, the characteristic equation of the target equipment was based on and a block diagram was assumed. Thereafter, controller variables were estimated using the frequency test results for each of the four control loops. In addition, time response simulations were performed using the estimated controller modeling. This method is thought to be of great help to reverse engineering in situations where there is completed equipment but no controller modeling.

In this study, it was investigated about optical simulation in high brightness and high uniformity direct-type backlight design for medical application. Direct-type backlight has been used high-brightness backlight such as Medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26mm of the distance of two lamps, 4.5mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5% in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

The flange spreader has been used to withdraw butterfly valves during maintenance. The typical flange spreaders required an excessive working space, and the pipe and flange are damaged by the load. In the previous study, the author developed a valve easy out tool with collet, and designed collet shape to ensure structural safety. However, clamping force of the collet had not been checked. In this study, design of collet shape was performed to improve clamping force. Techniques of structural analysis were established and design parameters were selected. Through parametric study, the collet shape with clamping force of 159,748N was suggested. This will contribute to stability and efficiently of valve maintenance.

In this paper, we design a basic algorithm enabling recognition of surrounding environment and collision avoidance among elemental technologies for autonomous driving, also applies sensor theoretical data and actual road performance to robo-racing system based on experimental data obtained through driving tests to enable sophisticated collision avoidance. For this study, a commercial autonomous driving patform(ERP-42), LiDAR and GPS sensors were used to implement efficient comunication systems and autonomous driving algorithms between each module.