PSC girder bridges, widely applied to bridge and railroad bridge (25 ~ 50 m), are a type of bridge that introduces compressive force in advance to the part where tensile force of concrete is generated. The tension force for introducing the compressive force by inserting the tendon into the concrete is a key element of the structural performance in the PSC. At present, however, measurement and verification of this is indirectly managed through deflection and cracking. However, it has become more necessary to develop practical evaluation methods of prestress force of PSC bridges. In this experiment, a small scale PSC beam with various curvature radii was made. Tension force monitoring with FBG sensor and EM sensor was performed on test members using 3 point flexural loading test. The measured values of the FBG sensors and the EM sensors used in the experiment were analyzed and compared with the measured values of the load cell.

In this study, the effect of electromagnetic wave from an electronic device on electric sensor system and optic sensor were analyzed to verify the reduction effect of a optic sensor and applicability to marin structure. Test revealed that optic sensor system was not occurred the noise by electromagnetic waves also had the low range of fluctuation.

Earthquake safety assessment software of the cable-stayed bridge using the seismic acceleration measurement date was developed. Various safety assessment indices for evaluation structural safety and serviceability of bridges are discussed. A systematic approach is proposed to process the raw data for generating appropriate safety assessment indicators. The software for structural state evaluation includes (i) format conversion of raw data, (ii) noise filtering, (iii) generation of assessment index, (iv) state evaluation. Determination of the limit state included in the condition evaluation step is discussed and an example of the graphic user interface of the software is shown.

As public service life of PSC bridges is on the increase, lots of effort has been devoted to verify safety of PSC bridges. On the safety of PSC bridges, effective prestress force is one of the most important factors. At the moment, however, indirect measurements are mostly employed to evaluate the effective prestress force during and after construction. In this study, performances of FBG and EM sensors, which can directly measure the effective prestress force, are tested and investigated.

Measurement of dynamic displacement of large structure is one of the most challenging issues in structural health monitoring. With a Kalman filter based technique, the proposed displacement measurement system which consists of GPS-RTK, accelerometer, DAQ, and computer shows the huge potential for precise measurement of dynamic displacement of large structure. The performance of the system has been verified by modal shaker test. This paper presents a new system for dynamic and pseudostatic displacement measurement for a large-scale civil infrastructure. Even though dynamic displacement measurement on a large-scale structure is one of the most challenging issues in structural health monitoring, traditional displacement sensors as well as cutting edge noncontact sensors suffers from the lack of accuracy and precision due to field conditions such as measurement distance and requirement for a fixed support. With a Kalman filter based technique, the proposed displacement measurement system, which consists of a GPS-RTK, accelerometer, DAQ and computer, efficiently estimates bias contained in the acceleration record by fusing the acceleration with intermittently recorded GPS-RTK data, and estimate high precision and high accuracy displacement by removing the bias from the acceleration record and conducting double integration. Through a series of lab-scale tests using a vibration exiciter, the performance of the system has been verified and shows the potential for accurate and precise measurement of dynamic displacement of a large-scale structure.

In this study, to evaluate the applicability of VDMS(Vision-based Displacement Measurement System) in the field, 30m of real specimens were measured vertical displacement using the VDMS and a displacement Transducer. The VDMS was to take a picture by attaching Target on the structure. Then, by analyzing the video in Digital Image correlation algorithm obtained a displacement of the structure. The vertical displacement of 30m real specimens using the VDMS and a displacement Transducer was very similar, and it is determined that the VDMS has a high applicability in the field.

Tunnel were the inverse analysis based on the crown displacement calculated based on the generation of the result 63.80mm crown displacement measurement result. Three-dimensional inverse analysis up to the crown displacement was 60.7mm has occurred, which was considered similar to a two-dimensional inverse analysis 63.6mm.*

Tunnel were the inverse analysis based on the crown displacement calculated based on the generation of the result 63.80mm crown displacement measurement result. Inverse result was mainly to review the most significant impact on the interpretation weathed rock modulus of elasticity was smaller than the measurement when evaluating design values.*

The light rail transits, in theses days, are planed to be introduced in Korea. However, there are more and more problems regarding the noise and vibration from the trackway. In order to reduced the vibration and noise, various method have been applied. Among those methods, it is that one of the most effective ways is to apply the floating mat underneath the slab track. In this stud, a numerical modeling to calculate the effect of the floating mat is to be used as well as the performance of the floating track.

Current bridge load carrying capacity evaluation method requires FE model and field test to get the dynamic response. This paper shows a economic and convenient technique to trace the variation of the load carrying capacity of bridges, based on fundamental frequency measured under actual traffic flow.

본 연구에서는 금강유역에 대한 지역홍수빈도분석을 실시하고 재현기간에 따른 홍수량을 추정하는 관계식을 제안하였다. 유역 내 유량자료의 수문학적 독립성과 동질성에 대한 검증을 위하여 Lag-1 자기상관성 분석, 동질성 검정, 이상치 검정, 불일치척도 검정을 수행하였다. 검정 결과, 금 강유역의 대상 관측소들은 시간에 대하여 독립적이고 동질적 모집단에 속하며 이상치는 없었다. 일반 극치 분포(GEV), 3변수 대수정규 분포(LN- Ⅲ), 피어슨-III 분포(P-Ⅲ), 일반 로지스틱 분포(GLO), 일반 파레토 분포(GPA) 등 5개의 3변수 확률분포함수에 대한 L-모멘트비도와 평균가중거 리(AWD), 그리고 ZDIST 적합도 산정 결과, GLO 분포함수가 금강유역의 최적 확률분포형으로 선정되었다. GLO 분포를 바탕으로 지역홍수빈도를 추정하는 회귀모형을 제안하였고, 강경 관측소의 관측 유량을 이용하여 회귀모형의 적용성을 검증하였다.

Recently, the pipeline system for waste transportation has been increasingly constructed as new solution for the waste collection and disposal system by constantly increasing domestic waste which issued as social problem. The pipeline system is constructed through long distance, so proper long-term monitoring system is necessary which available to detect the damage location for the effective maintenance. In this paper, the experimental study is carried out to evaluate the applicability of optical strain gauge sensor based on FBG for the long-term monitoring system. Three test parameters such as pressure leaking, blockage and deformation are considered as typical damages for real-scale pipeline test specimen. In order to measure flexural and volumetric strain and temperature, three FBG sensors are installed at each monitoring sections. From the test results, this study suggested effective methods of sensor installation and arrangement. Also the sensor spacing for the design of monitoring system using FBG sensor is derived by the correlation of distances from deformation between sensor responses.

최근 건설되는 특수교량에는 상시적인 유지관리 체계로서 계측시스템이 활발히 도입되고 있는 상황이다. 일반적으로 계측시스템 을 이용한 교량 유지관리 시에는 관리기준치를 설정하여 교량의 상태를 평가하게 되지만, 관리기준치 설정 기준과 방법이 없어 설계허용값에 근거하여 단순하게 설정되고 있는 실정이다. 기존의 방법으로 설정된 관리기준치를 적용할 경우 관리기준치 범위 내에서 발생된 이벤트, 이상 거동 및 점진적으로 발생하는 손상 등과 같은 교량의 상태변화를 파악하기에는 한계가 있다. 따라서, 본 연구에서는 기존의 절대치 관리에 있 어 관리기준치 설정의 문제점을 고찰하여 실무에 효과적으로 적용가능한 개선된 관리기준치 설정 및 운영방법을 도출하였다. 개선된 관리기 준치 설정을 위해 검벨분포를 사용한 확률론적 접근방법을 도입하여 재현빈도 50년, 100년의 기댓값에 대한 교량의 주의, 경고치를 산정하였 다. 본 연구에서의 관리기준치는 설계허용치 범위 내에서 발생하는 이상거동을 감지할 수 있도록 계측데이터와 계측데이터의 구간변화량에 대한 관리기준치를 각각 설정되었으며, 제안된 방법으로 산정된 관리기준치는 실측 데이터에 대입하여 비정상적인 데이터의 발생여부를 적절 하게 파악할 수 있다는 것을 확인하였다.

In this study, Levee Visual Inspection and Water Level Detection System was developed to handle visual inspection information on the levee effectively by using mobile/intelligent CCTV system. This system will be used to manage levee reasonably, in order to prevent disaster in the riparian areas preemptively on the base of management task.

It is very difficult to predict the slope failure and to evaluate the slope stability, because the slope failure mechanism is complex and there is many influence factors. This paper was conducted to study slope stability analysis based on the measured data on the slope. The methods used in the study are the asymptotic, clustering characteristics, 3D spatial coordinates system. To analysis slope behavior, we studied the advantages, disadvantages and applicability of each method.

Waterside structures such as dams or levees are essential for flood protection, and flood induced failures of such structures can cause serious damages. Real-time safety prediction can prevent most of the damages to inland or the consequential economic damages induced by flood hazards. This study introduces a method of real-time safety prediction by evaluating the correlation between numerical simulation, real-time measurement, and geo-centrifuge data.

This study measured the in-plane and out-of-plane deflections of a beam using image processing technology. The deflections and rotation obtained from the vision-based measurement were compared with those from the traditional, current measurement method using three wired potentiometers. The results of this study indicated that the proposed vision-based measurement system was successfully applied to evaluating the out-of-plane deflections of a beam including the vertical in-plane deflection.

Improved measurement and structural modeling analysis of result, an improved method is very efficient. The difference of about 10~15% comes out, Improved measurement and structural modeling analysis of result, it is determined that the need for additional research, such as a change of the modeling subdivision, load contions.

In this paper, a logger of an earthquake accelerometer in order to link and share the seismic data easily with related institutes is presented. The firmware is embedded into the logger, which transforms the seismic data into the formats, miniSEED.