수분을 포함한 압축공기는 공압 시스템에서 부식과 관석 등의 여러가지 문 제를 유발하기 때문에 기상 내의 수분을 효율적으로 제거하기 위한 다양한 기술이 개발되어오고 있다. 특히, 분리막을 이용한 제습 방법은 에너지 소비가 작 고, 장치를 소형화할 수 있다는 장점으로 주목받고 있다. 본 연구에서는 제습용 중공사막을 상전이 방적법으로 제조하고, 친수성 또는 소수성으로 표면 개질하였다. 선택도와 투과도 향상을 위하여 기공 구조를 제어하였으며, SEM, 기체 투 과도, 접촉각 측정 등으로 중공사막의 특성을 분석하였다. 또한, 분리막을 모듈 화하여 제습 실험을 수행하였으며, 여러 운전 조건에서의 특성을 확인하였다.

As a result of the increasingly serious air pollution worldwide, there are many social costs in the country. In general, there are legal measures to improve air quality such as investment projects, input of public funds, attraction of private capital, and regulation of air pollution prevention. In this study, we propose future legislative policies through the following analysis on the status of various researches in domestic and foreign countries for the improvement of air quality and related legal system. The domestic indoor air quality is getting better through ongoing management. From a legal perspective, The air quality law, such as indoor air quality law and environmental law, has been continuously revised to improve indoor air quality. However, contrary to the air quality law, indoor air quality management is carried out by various related departments under current law. Due to the different management facilities and management standards of each ministry, the effectiveness of relevant laws is deteriorated in organically managing multi-use facilities. This may lead to confusion and may be an impediment to the effective achievement of the institution's objectives. The pollutants of interior space are one of the main causes not only building materials, but also office equipment such as computers. however, The pollutants to be managed under the current legislation are mainly limited to building materials. In addition, the criteria set for each pollutant have a problem that it depends on the after-regulation standard that is made after the pollutant is released from the pollutant source. There is a need for systematic analysis and research to prevent adverse effects that may occur due to pollution sources through the prevention system. It is time to change the direction of regulation-oriented policies and to make policy changes that can improve air quality through systems such as emission trading system..

In recent years there have been large increases in the hydraulic loading rates used to design dissolved air flotation (DAF) facilities for drinking water applications. High rate DAF processes are now available at loading rates of 20 to 40 m3/m2·h. This research evaluated dissolved air flotation as a separation method for algae and organic compounds from water treatment plants. During the service period of 2016. 5. to 2017. 6., DAF pilot plants (500 m3/day) process has shown a constantly sound performance for the treatment of raw water, yielding a significantly low level of turbidity (DAF treated water, 0.21～1.56 NTU). As a result of analyzing the algae cell counts in the influent source, it was expressed at 100-120 cells/mL. In DAF treated water, the removal efficient of alge cell counts was found to be upto 90%. The stable turbidity and algae removal were confirmed by operating the high rate DAF process under the condition of the surface loading rate of 30 m3/m2·hr.

In this study, we divided the process operation scenarios into three categories based on raw water temperature and turbidity. We will select and operate the process operation scenario according to the characteristics of the raw water. The number of algae in the DAF treated water has been analyzed to be less than 100 cells/mL. These results indicated that the DAF process is effective in removing the algae. In addition, the scenario of the integrated management decision algorithm of the DAF process was developed. DAF pilot plants (500 m3/day) process has shown a constantly sound performance for the treatment of raw water, yielding a significantly low level of turbidity (DAF treated water, 0.21~1.56 NTU).

Every year, China’s air quality is reaching hazardous level. Accordingly, China is adapting stringent environmental regulations under the new 13th Five Year Plan. The noticeable developments in the new air pollution regulations include: (1) mandatory air pollutant disclosure requirement; (2) shift towards non-compliance liability rule; and (3) increased penalty for transgression against wider range of industries. This paper first explains that these developments will induce American investments in China to carefully draft investment contracts, particularly confidentiality and limited liability clauses to minimize the risk of harsher penalties. The paper then argues that China’s stringent pollution regulations will not negatively affect American investment trend in China, mainly because most American investments already adhere to the OECD standard, and disclosing environmental information will enhance entity’s good reputation and attract investors.

To gather information on the indoor air quality of the greenhouses used for edible oakwood mushroom cultivation, temperature, humidity, and bacterial concentration and species were investigated in 2015 and 2016 in 21 mushroom greenhouses located in ten different regions in Korea. Temperature and humidity of all the mushroom greenhouses ranged from 16.2 to 30.8°C and from 28.2 to 85.6%, respectively. Bacterial concentration exceeded the Korean indoor air quality standard value (800 cfu/m3) in 15 of the 21 mushroom greenhouses. A total of 33 genera and 76 species were identified in the indoor air of the mushroom greenhouses investigated. Of the identified bacteria, 10 genera and 15 species including Acidovorax oryzae, Bacillus infantis, B. licheniformis, Cellulosimicrobium funkei, Ewingella Americana, Exiguobacterium sibiricum, Leclercia adecarboxylata, Lysinibacillus sphaericus, Pseudomonas fulva, Raoultella terrigena, Staphylococcus cohnii, S. haemolyticus, S. saprophyticus, S. sciuri, and Streptomyces sindenensis are among those known to have a harmful effect on human health. These bacteria have been reported to cause sepsis, skin infection, bloodstream infection, bacteremia, spondylitis, peritonitis, acute meningitis, endocarditis and urinary tract infection. The results of this study indicate that continuous hygiene management of indoor air is necessary in the greenhouses used for oakwood mushroom cultivation.

Senior citizens are reported to be highly sensitive to environmental pollutants, including fine particulate matter. The purpose of this study is to investigate the distributions of fine particulate matter concentrations in town halls and senior citizens’ halls, where senior citizens typically spend a lot of time. The results of this investigation will serve as fundamental data for conducting indoor air quality studies and establishing a regional environmental health policy governing senior citizens’ facilities in Yeongwol county in the future. From January 4 to February 1, 2017, PM10 and PM2.5 concentrations in 170 seniors’ facilities located in Yeongwol county were measured. The average concentrations of PM10 and PM2.5 that were measured from each seniors’ facility chosen from Yeongwol county were 25.1 ± 18.9 μg/m3and 12.5 ± 9.3 μg/m3 respectively. Average concentrations and the average of maximum concentrations were lower than the living space standard of 100 μg/m3 for PM10 and the atmospheric environment standard of 50 μg/m3 for PM2.5, which were set by the Ministry of Environment for populations vulnerable to environmental pollution. As a result of analyzing the sources in seniors’ facilities in Yeongwol county during the winter months, it was found that indoor sources of air pollution such as cooking is main sources rather than outdoor sources of air pollution.

While the air quality of public facilities such as daycare centers is managed by law, the management of air quality in residential buildings is not mandatory. For this reason, air quality in an apartments has not been well surveyed. In this study, we investigated the influence of cooking and ventilation on the indoor air quality in an apartment. Continuous measurements were performed using real-time monitoring instruments from June 9 to 17, 2014 in Seoul, Korea. A CO2 meter was used to measure CO2 concentration and temperature. A portable aerosol spectrometer (0.25-32 μm), a nanoparticle aerosol monitor (10-1,000 nm), and an aethalometer (total suspended particulate, black carbon) were also used. During the measurement period, ventilation and cooking activities were observed 8 and 10 times, respectively. In 5 of the observed cases, both activities were done simultaneously. During the ventilation, CO2 concentration and temperature were decreased; however, particle concentrations were increased. When cooking was done, particle concentration was increased in some cases; however, CO2 concentration and temperature were unchanged. Combined cased CO2 concentration and temperature were decreased and particle concentrations were increased.

This study was carried out to explore possibilities of cultivating horticultural crops in the air-dome greenhouse in comparison to the common iron-frame greenhouse as the standard. The levels of carbon dioxide and atmospheric pressure measured inside the air-dome greenhouse turned out to be higher than those measured inside the iron-frame greenhouse. Contrastingly, light intensity was relatively weaker inside the air-dome greenhouse due to the air-inflated double layers. Plants of melon and cherry tomato were cultivated from May 2 to August 12, 2016, respectively in the two greenhouses. For melon plants, growth in the air-dome greenhouse effectively increased fruit weight as well as trunk circumference compared to iron-frame greenhouse. Moreover, soluble sugar content of melon fruit was significantly higher when cultivated in the air-dome greenhouse. For cherry tomato plants, fruit yield of cherry tomato was significantly increased inside the air-dome greenhouse. Furthermore, it has been found that the air-dome greenhouse was considerably effective in shortening the growing period of melon and cherry tomato plants in comparison to the iron-frame greenhouse.

선박의 오염물질 배출에 대한 규제는 최근 IMO/MEPC(국제해사기구/해양환경보호위원회)를 통해서 진행 중이다. 선박오염원 에서 배출된 오염물질은 국지적인 요인에 의해서 연안지역을 비롯하여 육지로 확산될 수 있다. 인천과 같이 선박 배출 오염물질에 노출 되어 있는 항구 도시에서 선박오염원 조절은 연안지역의 대기질 관리정책을 효율적으로 고안하기 위해서 반드시 필요하다. 연안지역의 대기오염물질 중 선박에 의한 NOx와 SOx의 농도는 전체 NOx와 SOx 농도의 각각 14 %와 10 %를 차지한다(NIER, 2008). 연안도시지역의 대기질은 국지적인 순환에 의존하는 오염물질의 확산 경향과 선박의 수에 영향을 받는다. 선박오염원으로부터 배출된 오염물질의 확산 을 WRF(Weather Research and Forecasting model)의 기상장을 기초로 CALPUFF(California Puff model)를 사용하여 분석하였다. 그리고 연안도 시지역의 대기확산모델은 정박한 선박과 입·출항하는 선박으로 나누어 각각 점오염원과 선오염원으로 구분하여 모의하였다. 선박척수 82~84척을 기준으로 NOx의 총 평균 배출량은 입·출항시 각각 6.2 g/s, 6.8 g/s이었고, SOx의 총 평균 배출량은 입·출항시 각각 3.6 g/s, 5.1 g/s 이었다. 정박 중인 선박의 NOx와 SOx에 대한 총 평균 배출량은 각각 0.77 g/s, 1.93 g/s이었다. 육풍의 영향으로 인하여 인천항으로부터 내 륙으로 진행되는 오염물질의 수송이 억제되었고, 내륙의 SOx와 NOx 농도가 일시적으로 감소하는 원인이 되었다. 해풍에 의해 NOx와 SOx가 내륙으로 확산되었고, 내륙의 NOx와 SOx의 농도가 점차 증가하였다. 인천항과 인접한 지역의 오염물질의 농도는 해륙풍의 영향 보다 인천항에 정박 중인 선박오염원에 의한 영향이 더욱 크게 반영되었다. 본 연구는 연안도시지역의 대기질 정책고안과 배출기준을 정하는 것에 유용할 것으로 기대된다.

본 논문에서는 곤충 모방 날갯짓 초소형 비행체에 적용될 끈을 이용한 날갯짓 구동 장치의 구동 원리와 그 최적화 과정이 소개된다. 이 날갯짓 구동 장치는 끈을 이용하여 구조의 경량화와 관성력 감소로 인한 에너지 효율 상승을 목적으로 설계되 었다. 먼저 장력만 전달할 수 있는 끈의 특성을 고려하여 운동학적인 수식이 정립되었으며, 이를 통해 구동 장치의 거동 특 성을 파악할 수 있었다. 이 수식들은 수정된 패턴 검색 최적화 과정에 포함되어 메커니즘의 운동학적 최적화를 가능하게 만 들었다. 최적화된 형상으로 제작된 시제품은 설계의 구동 원리에 맞게 운동하였으며, 그 날갯짓 폭은 목표한 날갯짓 폭을 만 족시켰다. 수치적 시뮬레이션과 실험 결과는 잘 일치하여 제시된 구동 장치가 실제로 활용될 수 있음을 보였다.

왕복동식 압축기에서 피스톤과 커넥팅로드는 중요한 부분이다. 이러한 주요부에 기계적 부하가 과도하게 가해지면 해당 기부 속이 손상될 수 있으며, 교체하기도 쉽지 않고 비용도 많이 든다. 따라서 내구성과 수명에 영향을 미치는 요인을 분석할 필요가 있다. 본 연구의 주요 목적은 피스톤과 커넥팅로드의 최대 응력 집중 위치를 확인하는 것이다. 이를 위해 설계된 공기압축기의 작업 공정의 동적 계산을 기반으로 피스톤 및 커넥팅로드의 응력 분석을 수행하였다. 공기압축기의 피스톤과 커넥팅로드의 3 차원 모델을 따로 설계하고, 이러한 부품들의 유한요소 해석은 수치해석적인 근사해법을 사용하였다. 피스톤은 열 경계 조건 없이 크랭크 샤프트의 각도에 따라 압 력 부하를 받는다. 시뮬레이션 결과는 피스톤과 커넥팅로드의 응력 집중 위치와 그 값을 예측하고 추정할 수 있다. 그 결과 크랭크 각도 135°와 225°에서 피스톤은 190MPa, 커넥팅로드는 123MPa 이상의 최대 등가응력이 나타났으며 이는 인장 항복강도 이하의 값이다. 또한, 커넥팅로드와 피스톤에 계산 된 안전 계수는 1보다 높게 나타났다. 더욱이, 이러한 결과는 왕복동 공기압축기 제작사에 피스톤 및 커넥 팅로드를 설계함에 있어서 최적화를 위한 참고 자료로 활용 될 수 있다.

In this study, the distribution of each facility group, the pollution level of local municipalities and the status of self-measurement were investigated and analyzed using data provided by the Ministry of Environment. It was found that most of the workplaces to be managed are facilities of sensitive class, indoor parking lots and largescale stores. The results of the survey on the total pollution level by facility group showed that the rate of contamination was the highest in the facilities where there are many sensitive users, including the subway station and the underground shopping malls. Through self-measurement, in the case of fine particle matter, it was found that it was present in amounts of 51.71 μg/m3, 50.72 μg/m3, 44.47 μg/m3 and 54.44 μg/m3 in medical institutions, day care centers, elderly care facilities and postnatal care centers, respectively. Also, there were facilities exceeding the standard in the medical institutions. However, most of the pollutants in the facilities surveyed by the municipality are higher than the self-measured concentrations, so it is necessary to examine the cause of such pollution.

본 연구에서는 한국원자력연구원의 핵연료가공시설 굴뚝 내에서 9곳의 시료채취 위치를 선정하여 ANSI/HPS N13.1-1999 지침에서 제시하는 기준에 따라 그 적절성을 평가하였다. 유체를 포함한 다중물리 해석 소프트웨어인 COMSOL을 활용하여 유동교란 지점으로부터 굴뚝 직경의 배수 높이 위치(L/D) 단면에서의 속도분포, 유동각 및 10 μm 크기의 입자분포 등의 항 목에 대하여 기준만족 여부를 평가하였다. 평가 결과, 5 L/D 이상에서 속도분포에 대한 기준을 만족했으며, 평균 유동각에 대한 기준은 모든 위치에서 만족했다. 입자분포에 대한 기준은 5 L/D 와 9 L/D 에서 만족하였으나, 그 분포가 일부에서 기 준을 만족하지 못하였다. 균일한 입자분포를 얻기 위한 방법으로 굴뚝 내 정적 혼합장치(static mixer)와 둘레링(perimeter ring)을 추가하는 것을 제안하고, 이에 대한 평가를 수행하였다. 정적 혼합장치를 추가한 경우에는 5-10 L/D, 둘레링을 추가 한 경우에는 5 L/D 및 7-10 L/D 에서 입자분포에 대한 기준을 만족하였다. 보완을 위하여 추가한 2 가지 조건에서, 입자분포 에 대한 기준을 만족하는 지점은 속도분포 및 평균 유동각에 대한 기준 역시 만족하고 있음을 확인하였다. 본 연구에서 사 용한 방법은 신규시설뿐만 아니라, 현장입증시험 수행이 어려운 운영중인 시설에 대하여 시료채취 위치의 적절성을 평가하 기 위한 방법으로 활용될 수 있다.

The number of children who use day-care centers is increasing. Most indoor air quality (IAQ) management has been based on daily average pollutant concentrations measured once a year. A more comprehensive management of IAQ is needed to protect children’s health from air pollutants in day-care centers. In this study, we investigated the weekly variation of air pollutant concentrations in a nursing room of a day-care center located at the roadside for a week in June of 2014. Average concentrations of CO2, PM10, black carbon, and total surface area of lungdeposited particles during nursing time of the day-care center were 510 ppm, 27.8 μg/m3, 1.87 μg/m3, and 30.6 μm2/cm3, respectively, with a similar diurnal pattern shown on weekdays.

This study aimed to identify milling characteristics depending on the number of a cutting roller’s air vent and blowing velocity to remove rice bran by the cutting type milling machine which can minimize the conventional milling process. The level of whiteness was found to be 38±0.5 in all the conditions, showing consistent whiteness levels during milling. The rice temperatures turned out to be 15.4 and 14.6oC which were rather low-level under the conditions of the cutting roller with 3 vents and blowing velocities of 35 and 40 m/s respectively. Cracked rice ratio was 2.13% under the conditions of the cutting roller with 3 vents and a blowing velocity of 35 m/s. Broken rice ratio showed the range of 0.762-0.869%, reflecting a low level. Turbidity after milling was decreased, as blowing velocity became faster. Energy consumption for milled rice production was decreased, as blowing velocity became faster. The optimum milling condition for cutting type milling machine depending on air vent number of cutting roller and blowing velocity was found to be 3 vents and 35 m/s.

This study aimed to identify milling characteristics depending on the number of a cutting roller’s air vent and blowing velocity to remove rice bran by the cutting type milling machine which can minimize the conventional milling process. The level of whiteness was found to be 38±0.5 in all the conditions, showing consistent whiteness levels during milling. The rice temperatures turned out to be 15.4 and 14.6oC which were rather low-level under the conditions of the cutting roller with 3 vents and blowing velocities of 35 and 40 m/s respectively. Cracked rice ratio was 2.13% under the conditions of the cutting roller with 3 vents and a blowing velocity of 35 m/s. Broken rice ratio showed the range of 0.762-0.869%, reflecting a low level. Turbidity after milling was decreased, as blowing velocity became faster. Energy consumption for milled rice production was decreased, as blowing velocity became faster. The optimum milling condition for cutting type milling machine depending on air vent number of cutting roller and blowing velocity was found to be 3 vents and 35 m/s.

본 연구는 이미 진정효과가 뛰어나다고 알려져 있는 클래식과 함께 진정효과가 있다고 밝혀진 레게의 효과를 비교하고자 진행되었다. 연구에 사용된 실험견들은 실험을 잘 이해하고 있는 연구원들이 현재 키우는 반려견 4마리를 섭외하여 진행되었다. 섭외 된 반려견은 말티즈 2마리, 요크셔테리어 2마리이다. 진정효과를 알 수 있는 지표로는 Lori R. Kogan외의 ‘Behavioral effects of auditory stimulation on kenneled dogs’ 논문에서 사용한 지표를 일상에서도 확인하기 쉽도록 간소화하여 짖은 횟수, 서있는 시간, 서있지 않은 시간, 수면시간의 평균을 냈다. 그 결과 짖는 횟수 외의 큰 차이는 보이지 않았고, 진정효과만은 확실한 것을 확인하였다. 다만 일상생활에서 실행하는 것과 실험견의 일정한 결과를 위해 각 가정에서 실행하여 정확도는 떨어질 수 있다. 주변 소음 등이 적은 가정에서 실행한다면 조금 더 정확한 결과를 얻을 수 있을 것이다.