In this study, we investigated the dynamic stability of the system and the semi-analytical solution of the shallow arch. The governing equation for the primary symmetric mode of the arch under external load was derived and expressed simply by using parameters. The semi-analytical solution of the equation was obtained using the Taylor series and the stability of the system for the constant load was analyzed. As a result, we can classify equilibrium points by root of equilibrium equation, and classified stable, asymptotical stable and unstable resigns of equilibrium path. We observed stable points and attractors that appeared differently depending on the shape parameter h, and we can see the points where dynamic buckling occurs. Dynamic buckling of arches with initial condition did not occur in low shape parameter, and sensitive range of critical boundary was observed in low damping constants.

본 연구는 두점식 선박 계류시스템의 종방향 외력에 대한 비선형 동적거동 해석을 수행하였다. 특정 입력 매개변수에 대한 카 오스 운동과 한계주기궤도 등의 비선형 거동의 특성을 연구하였다. 주로 비선형복원력은 계류시스템의 강한 비선형성과 동적거동의 다양 성을 제공한다. 계의 운동방정식 시뮬레이션에 사용된 수치 적분기는 4차 룽게쿠타법이다. 외력진폭과 주파수를 변화시킬 때 분기 그림 과 동적불안정 현상들을 볼 수 있다. 외력의 주파수(진동수)가 0.4 rad/s인 경우 수많은 혼돈상태 점들 사이에 주기창이라 불리는 안정적인 주기해가 관측된다. 주파수가 0.7 rad/s인 경우는 외력진폭이 1.0을 초과할 때 혼돈 영역이 갑자기 증가한다. 주파수가 1.0 rad/s인 경우는 주 파수가 0.4 rad/s 및 0.7 rad/s인 경우와 비교해 볼 때, 혼돈 운동이 약화된다. 아울러, 두점식 계류시스템은 각 매개변수에서 준주기 운동, 한 계주기궤도, 대칭성의 깨짐과 같은 다양한 정상상태의 궤적이 관측된다.

PURPOSES: In this paper, the applicability of DEM to a coarse graining method was evaluated by simulating a series of minicone tests for cement pasteMETHODS: First, the fundamental physical quantities that are used in a static liquid bridge model were presented with three basic quantities based on the similarity principle and coarse graining method. Then, the scale factors and surface tensions for six different sizes of particles were determined using the relationship between the physical quantities and the basic quantities. Finally, the determined surface tensions and radii were utilized to simulate the fluidal behavior of cement paste under a minicone test condition, and the final shape of the cement paste with reference DEM particle radii was compared with the final shape of the others.RESULTS : The simulations with adjusted surface tensions for five different radii of particles and surface tension showed acceptable agreement with the simulation with regard to the reference size of the particle, although disagreement increases as the sizes of the particle radii increase. It seems reasonable to increase the particle radii by at least 0.196 cm considering the computational time reduction of 162 min.CONCLUSIONS: The coarse graining method based on the similarity principle is applicable for simulating the behavior of fluidal materials when the behavior of the materials can be described by a static liquid bridge model. However, the maximum particle radius should be suggested by considering not only the scale factor but also the relationship of the particle size and number with the radius of the curve of the boundary geometry.

Dynamic numerical simulation of pile-supported slab track system embedded in a soft soil and embankment was performed. 3D model was formulated in a time domain to consider the non-linearity of soil by utilizing FLAC 3D, which is a finite difference method program. Soil non-linearity was simulated by adopting the hysteric damping model and liner elements, which could consider soil-pile interface. The long period seismic loads, Hachinohe type strong motions, were applied for estimating seismic respose of the system, Parametric study was carried out by changing subsoil layer profile, embankment height and seismic loading conditions. The most of horizontal permanent displacement was initiated by slope failure. Increase of the embedded height and thickness of the soft soil layer leads increase of member forces of PHC piles; bending moment, and axial force. Finally, basic guidelines for designing pile-supported slab track system under seismic loading are recommended based on the analysis results.

Current seismic design provisions such as ASCE 7-10 provide criteria for selecting ground motions for conducting response history analysis. This study is the sequel of a companion paper (I – Ground Motion Selection) for assessment of the ASCE 7-10 criteria. To assess of the ASCE 7-10 criteria, nonlinear response history analyses of twelve single degree of freedom (SDF) systems and one multi-degree of freedom (MDF) system are conducted in this study. The results show that the target seismic demands for SDF can be predicted using the mean seismic demands over seven and ten ground motions selected according to the proposed method within an error of 30% and 20%, respectively

For estimating the seismic demand of buildings, most seismic design provisions permit conducting linear and nonlinear response history analysis. In order to obtain reliable results from response history analyses, a proper selection of input ground motions is required. In this study, an accurate algorithm for selecting and scaling ground motions is proposed, which satisfies the ASCE 7-10 criteria. In the proposed algorithm, a desired number of ground motions are sequentially scaled and selected from a ground motion library without iterations.

In development of high speed Rigid conductor line(R-bar) over 250km/h, it is important to develop the method to anticipate the mechanical stability of the R-bar and of the transition structure which connects the flexible Overhead Contact Line. To do this, firstly, the FE(Finite Element) model for a transition structure was established and the initial deformed configurations due to gravitational force is obtained by a static analysis and the pantograph was modeled by a simplified mass-spring-damper system and the contact behavior between conductor and pantograph was defined by the penality method. Secondly, FE analysis results were reviewed with the test results of contact force between conductor and pantograph at the low speed of train. Finally, using the established analysis method, the evolution of contact forces was performed for a newly designed high speed R-bar and for its transition structure.

A fatigue analysis considering dynamic effects yields a more accurate fatigue life prediction than static fatigue analysis because it considers effects of inertia, flexibility and resonance that occur in the structure up to its natural frequency. However, the dynamic fatigue analysis of bogie frames of the rolling stock is not yet taken into account in the norm EN 13749. Therefore, in order to assure the safety of the rolling stocks, it is important to examine the fatigue analysis of that considering dynamic effects under applied load histories. Moreover, since the bogie frame consists of various welded joints, it is necessary to evaluate fatigue life of that considering welding properties as well as dynamic effects. In this study, under load histories converted from measured acceleration histories, static and dynamic fatigue analysis of the welded bogie frame are performed respectively.

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

Photo responsive polymer(PRP) is well known for its photo deformation under UV light, and goes back to its original shape in visible light due to the photoisomerization of the azobenzene inside the PRP. In this paper, dynamic study of the vibration in PRP is discussed. In order to predict photo-deformation of the PRP a multiscale modeling is introduced which covers quantum level photo excitation, microscopic morphology, and macroscopic deformation of the PRP. A simple 1D beam model is introduced to model dynamic bending behavior of the PRP. Through fast Fourious transformation analysis, we identify that vibration frequency of the PRP can be controlled by light polarization angle.

Piloti-type building is one of typical vertical atypical buildings. These buildings can fail by weak-story or flexible-story mechanism on the first story. They should be designed by taking into account the special seismic load, but those less than six stories are not required to confirm the seismic performance from structural engineers in Korea. For this reason, small-size pilloti-type RC buildings need to be checked for seismic performance. Based on this background, this study performed nonlinear dynamic analysis using the PERFORM-3D for small-size pilloti-type RC buildings and assessed their seismic performance. Examples are two through four story buildings with and without walls in the first story. The walls and columns in the first story satisfied the target performance in the basic of flexural behavior due to quite a large size and reinforcement. However, wall shear demands exceed shear strength in some buildings. When designed for KBC2009, wall shear strength exceed shear demand in some buildings, but still does not in others. Consequently, wall shear must be carefully checked in both existing and new small-size pilloti-type RC buildings.

If scour is occurred at shallow foundation of bridge, seismic performance of the bridge will be reduced. In order to evaluate accurate seismic response of bridge according to scour depths, modeling of foundation reflecting scour effect is important. In this study, taking into account the effect of the reduction in embedment depth of the shallow foundation by scouring, the soil around the foundation is modelled as an equivalent soil spring with various stiffness. Seismic fragility analyses for 3 types of bridges subjected to 4 types of ground motions classified into Site Class A, B, C, D are evaluated according to several scour depths. From the fragility analysis results, it can be observed that the deeper the scour depth, the higher probability of exceeding damage states. Also, seismic failure probability of asymmetric bridge is higher than that of symmetric bridge.

상태 기반 페리다이나믹 모델은 일반적인 재료 구성 모델을 구현할 수 있고 비국부 영역 내에서 연결된 모든 결합의 변형을 통해 각 절점의 재료 응답이 결정되기 때문에 체적 및 전단 변형을 모두 표현할 수 있다. 따라서 상태 기반 모델은 복잡한 동적 취성 파괴 현상(분기균열, 2차 균열, 계단균열, 균열 유착 등)을 해석하는데 유용하다. 본 논문에서는 평면응력 탄성체에 대해 2차원 상태 기반 페리다이나믹 모델을 적용하고 에너지해방율과 페리다이나믹 에너지 포텐셜로부터 손상 모델을 구성하였다. 페리다이나믹 파괴 해석 모델을 통해 취성 유리 재료에 대해 균열 면에 평행한 압축 응력파가 균열 분기 패턴에 미치는 영향에 대해 조사하였다. 실험을 통해 관찰된 동적 균열 진전 및 분기 패턴에 대한 주요 특성들이 페리다이나믹 해석을 통해 확인되었다. 또한 강한 인장 하중 하의 계단균열과 이차균열 등이 상태 기반 페리다이나믹 시뮬레이션을 통해 잘 모사가 되는 것을 확인할 수 있었다.

결합 기반 페리다이나믹 모델을 통해 다양한 동적취성파괴 현상을 해석할 수 있었지만, 결합 기반 모델은 다양한 재료 구성 모델을 표현하는데 여러 한계를 보여왔다. 특히 결합 기반 모델은 각 결합들이 서로 독립적으로 작용하도록 가정하였기 때문에 3차원 모델에서 포아송비가 1/4로 고정되며 전단 변형이 표현되지 못하고 체적 변형만이 모사되는 문제점이 있다. 본 연구에서는 상태 기반 페리다이나믹 모델을 통한 동적취성파괴 해석을 제시한다. 상태 기반 모델은 일종의 일반화된 페리다이나믹 모델로서 일반적인 재료 구성모델로부터 직접 페리다이나믹 재료 모델을 구성한다. 또한 연결된 모든 결합의 변형을 통해 각 절점의 재료 응답이 결정되기 때문에 체적 및 전단 변형이 모두 표현된다. 본 논문에서는 선형 탄성체에 대해서 상태 기반 평면 응력 페리다이나믹 모델을 소개하고 상태 기반 모델에 적합한 손상 모델에 대해 논의한다. 페리다이나믹 비국부 영역을 축소시키는 δ-수렴성 연구를 통해 동적파괴 모델을 검증하고 상태 기반 모델이 동적 균열 전파를 모델링하는데 적합함을 확인하였다.

In this study, we performed non-elastic dynamic analyses using LS-DYNA for plate structures made of laminated composite materials. It was used mat_59_composite_failure_shell_model providing from LS-DYNA as material model of composite material The material which is applied in the analysis as CFRP and GFRP, were compared by performing the dynamic analysis in accordance with various layup sequences. Numerical results show structural resistance against impact loading for different materials. In addition, The significance of the layup sequence in analyzing composite structures under impact loading is enunciated in this paper

일반적으로 지진취약도를 평가할 때 사용되는 해석방법 중 하나인 역량스펙트럼 방법은 증분동적해석에 비해 해석의 정확성이 떨어지는 제한점이 있다. 본 연구에서는 증분동적해석이 가장 정확도가 높은 해석기법이라는 점에 착안하여 증분동적해석을 이용한 지진취약도 곡선의 도출과정을 제안하였다. 타당성 비교를 위하여 역량스펙트럼 방법과 제안된 방법으로 도출한 취약도 곡선을 비교하여 두 해석기법에 의한 지진취약도 곡선의 경향을 분석하였다. 그 결과 Slight damage와 Moderate damage의 경우 두 해석방법이 유사한 곡선 경향을 보이나 Extensive damage와 Complete damage의 경우에는 IDA방법에 의한 곡선이 더 가파른 경향을 보였다. 이는 구조물의 거동을 이상화하여 극한점 이후 구조물의 저항 강도가 떨어지지 않는다고 가정하는 역량스펙트럼 방법의 영향을 받는 것으로 사료된다.

해상 교량, 고층건물이나 라이저와 같은 세장 주상체의 설계 및 시공이 늘어남에 따라 높은 유속에 대한 동적 안정성 검토의 중요성이 부각되고 있다. 특히 교량구조물은 장대화와 함께 경량화가 진행되었고 지진, 바람 등과 같은 동적 하중에 대해서 진동하기 쉬운 구조물의 특징을 가진다. 구조물 주위를 흐르는 공기에 의해 추가적인 공기력들이 발생하게 되고 이로 인해 공기 흐름장과 물체의 운동 사이에 상호작용을 가져오게 되고 부가적으로 발생된 공기력이 음(-)의 감쇠력으로 유입 풍향에 직각방향인 진동에 작용하여 갤로핑(galloping)등과 같은 자발진동을 발생시킨다. 본 논문에서는 가상경계법을 이용하여 사각 단면, 팔각단면, 모서리가 둥근 사각단면 및 양쪽 모서리가 절단된 형태의 사각단면에 대하여 유동해석을 실시하고 Glauert-Den Hartog가 제시한 방법으로 단면에 대한 갤로핑 불안정성의 발생 가능성을 평가하였다.