검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 226

        21.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, durability verification of forged wheels for automobiles were performed using the finite element method for bending fatigue analysis and impact analysis. In addition, the durability analysis environment of forged wheels was implemented. By analyzing the stress distribution on the surface of the forged wheel, the area with a high possibility of breakage was identified and improved. The durability analysis of the initial model forged wheel was performed by bending fatigue analysis and impact analysis, The stress distribution of the forged wheel surface was analyzed through the analysis results of the initial model. and the spokes, flanges, hubs, and rear parts are less likely to be damaged were cut to reduce the weight by about 10%, and the reliability of the improved model was confirmed.
        4,000원
        24.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 국제해사기구의 해양환경오염규제가 강화되어 오고 있다. 선박의 에너지 효율지수는 선박의 설계관점에서 매우 중요 한 지표이다. 더욱이 새롭게 건조되는 선박은 물론 기존 운항 선박에도 에너지 효율지수를 만족하도록 강화하고 있다. 이에 따라 운항 되고 있는 기존선박의 에너지 효율지수를 높이기 위해 선수 벌브개조, 운항 중 트림 최적화, 에너지 절감장치등 다양한 방법이 적용되 고 있다. 본 연구에서는 전산 유체역학을 이용하여 다양한 선수/선미 트림조건에서 선박의 저항성능을 계산하고 분석하였다. 이를 바 탕으로 최적화 된 트림조건에서 선박의 저항성능을 더욱 개선하기 위해 선수 벌브의 형상을 재설계하였다. 그 결과 정수 중에서 개선 된 벌브 형상을 적용한 경우, 유효마력이 약 5% 향상되는 것을 확인하였으며, 향후 파도 중에서 재설계된 벌브형상이 저항성능에 미치 는 영향을 조사할 예정이다.
        4,000원
        25.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Failure to comply with the performance test requirements for the centrifugal pumps at power plants often results in performance dissatisfaction as a result of field tests. This study proposed a method of reducing the uncertainty of the field test results by evaluating the systematic error in the measurement system caused by failure to follow the test requirements using the computational fluid dynamics(CFD) technique. As a result of the evaluation of the systematic error and reflecting it in the performance test data, it was confirmed that the error occurred at a constant rate with respect to the flowrate and that the pump, which showed a difference in performance actually had the same performance.
        4,000원
        26.
        2022.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The TMD has a simpler structure than other vibration control devices and shows excellent control performance for the standardized vibration occurring in the structure. However, when the vibration cycle of the structure coincides with the vibration cycle of the TMD due to the sudden external loads, the off-tuning occurs, which threatens the structure while increasing the vibration width of the TMD. Therefore, Electromagnetic Tuned Mass Damper (ETMD) was developed as a semi-active TMD that prevents off-tuning while exhibiting excellent control performance like TMD. To verify the control performance of the developed ETMD, the bending behavior control performance evaluation experiment using a simple beam bridge was performed. The experimental method compared the mutual control power by experimenting with the existing TMD method and the developed ETMD under nine excitation frequency conditions. As a result, it was confirmed that the control effect of ETMD was about 4.85% higher than that of TMD at 3.02Hz, which generates the maximum displacement in the simple beam bridge. Also, the off-tuning occurred in some excitation conditions when using TMD, although the off-tuning did not occur when using ETMD. Therefore, the excellent control performance of the ETMD developed in this study was verified.
        4,000원
        28.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A Catholic school is a school that spreads religious ideology to students by combining religious education with regular school curriculum. But, most Catholic schools do not have a separate liturgical space, mass is performed in multipurpose spaces such as auditoriums, and are exposed to severe acoustic defects due to the very aging facilities and lack of sound performance suitable for the liturgical space. So, in this study, an improvement plan was proposed using sound simulation after identifying acoustic defects through field measurements in the liturgical space of Haeseong High School in Jeonju. Also, hearing experiment using Acoustic Psychological Analysis was conducted to identify changes in subjective responses felt by students as they improved their acoustic performance. The results of study, before and after sound performance improvement sound pressure level(SPL500Hz) was 64.8dB at 66.7dB, the weighted sound level(SPLdB(A)) was 67.9dB(A) at 75.8dB(A), reverberation time(RT500Hz) was 2.04sec at 2.52sec, definition(D50,500Hz) was 40.2% at 33.5%, clarity(C80.500Hz) was –0.8dB at –1.18dB, and RASTI was 57.7% at 49.2% was evaluated. In addition, the amount of improvement in subjective responses before and after sound performance through psycho-acoustic experiment decreased by “Reverberation” -17.0%, “Loudness” -11.3% and increased by “Clear” 21.3%, “Vivid” 21.3%, “Intimacy” 12.4%, “Warmth” 14.3%, “Stability” 19.3%, “Godliness” 18.8%. Therefore, after improving sound performance, Haesung High School's liturgical space improved satisfaction with subjective sound performance felt by students and teachers to ensure sound performance suitable for the liturgical space.
        4,800원
        29.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Thermoelectric materials can reversely convert heat and electricity into each other; therefore, they can be very useful for energy harvesting from heat waste. Among many thermoelectrical materials, SnSe exhibits outstanding thermoelectric performance along the particular direction of a single crystal. However, single-crystal SnSe has poor mechanical properties and thus it is difficult to apply for mass production. Therefore, polycrystalline SnSe materials may be used to replace single-crystal SnSe by overcoming its inferior thermoelectric performance owing to surface oxidation. Considerable efforts are currently focused on enhancing the thermoelectric performance of polycrystalline SnSe. In this study, we briefly review various enhancement methods for SnSe thermoelectric materials, including doping, texturing, and nano-structuring. Finally, we discuss the future prospects of SnSe thermoelectric powder materials.
        4,000원
        31.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The Calorifier is a device that supplies hot water to the crew for showering and cooking. In particular, problems such as hot water not coming out when a trainee and a crew member take a shower at the same time may occur due to a malfunction of the temperature control valve that controls the temperature. In particular, when the hot water usage time is almost constant, such as a training ship, a high calorific value is required. When there is no dissatisfaction with the use of hot water, satisfaction with the educational environment is improved. Therefore, in this study, a solenoid temperature control valve is applied to increase satisfaction with hot water use, and a mechanical time switch is applied to the hot water circulating water pump to save energy.
        4,000원
        32.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, as interest in external environments such as fine dust has increased, the interior environment is also becoming important. The specifications for range hoods in the kitchen have been changed to improve ventilation of indoor air. Accordingly, the performance improvement through the structural design of the range hood was studied. Experiments were conducted on flow rates, pressure, temperature, and noise by A, B, and C-Type for performance analysis according to internal structure. For C-Type, the wind volume () was 223.69, 2nd stage 257.46, showing results of not less than 240 and not more than 280 within the ±1 m/s flow rate error range. Noise (dB) was an average value of 54.83 in the first stage and 60.65 in the second stage, showing results not more than 60 dB within the ±1 dB margin of error. This is the result of meeting KS C 9304:2020 Ventilation System Specification.
        17,400원
        33.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To ensure the safety and functionality of a railroad bridge, maintaining the integrity of the bridge via continuous structural health monitoring is important. However, most structural integrity monitoring methods proposed to date are based on modal responses which require the extracting process and have limited availability. In this paper, the applicability of the existing damage identification method based on free-vibration reponses to time-domain deflection shapes due to moving train load is investigated. Since the proposed method directly utilizes the time-domain responses of the structure due to the moving vehicles, the extracting process for modal responses can be avoided, and the applicability of structural health evaluation can be enhanced. The feasibility of the presented method is verified via a numerical example of a simple plate girder bridge.
        4,000원
        35.
        2021.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A Emergency Diesel Generator(EDG) in Nuclear Power Plant supplies electrical power to reactor cooling system when on/off site power is lost. So that protect the reactor from melting down. A Emergency Diesel Generator is required to reach ±2% of rated frequency(rotational speed) within 10 sec. To achieve prompt start, it is needed to find out affective factors and effect of that during starting period. This paper describes case of fail to achieve starting requirement and improvement of starting performance.
        4,000원
        36.
        2021.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        우리나라의 '해양오염방제 자재·약제의 성능시험기준 및 검정기준 중 ‘생물에 대한 영향시험’(생태독성시험)의 시험방법과 판정 기준의 개정과 관련한 방향을 제시하기 위해 현행 기준의 문제점을 파악하고 국가별 제도 비교를 통한 개선방안을 제시하였다. Skeletonema costatum을 이용한 성장저해시험의 경우, 배양액 색조를 비교하여 판단하는 기준 대신 측정된 성장률을 적절한 통계기법을 이용하여 비교 분석하는 과학적인 기준이 도입되어야 하며 시험기간의 경우, 지수성장기를 고려하여 4일 이내가 합당한 것으로 판단된다. 어류를 이용한 독성시험의 경우, 다양한 물질에 대한 독성시험 및 비교연구를 통해 방제 자재에 대해 일관되고 적절한 민감도를 나타낼 수 있는 보다 적절한 어체크기에 대한 재설정이 필요하고 이에 따른 합리적이고 객관적인 판정기준이 마련되어야 할 것으로 판단된다. 시험종의 경우, Artemia sp. 대신 해양 윤충류인 Rotifer, Brachionus plicatilis가 대안이 될 수 있으며 어류시험의 경우, 굴류(Oyster)와 같은 이매 패류의 분류군을 이용한 독성시험으로의 대체 역시 대안으로 고려될 수 있다. 마지막으로 해양오염방제 자재·약제의 형식승인 시험과 관련하여 생태독성시험 분야의 경우, 업무의 특수성과 결과의 신뢰성을 고려하여 별도의 공인시험기관 지정 또는 관련 유사 법률과 연계한 일원화된 창구가 필요하며 수용가능한 수준의 시험비용 산정과 시험항목 조정을 통한 합리적인 제도개선이 필요할 것으로 판단된다.
        4,000원
        38.
        2021.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Thermal and wind panels are installed on offshore oil and gas platforms to protect personnel, equipment and structures. However, in general, panels are designed and manufactured through trial and error based on performance tests. For this reason, it is difficult to develop and design a heat sink in the Korean shipbuilding and offshore equipment industry due to the lack of performance test data and limited experience. In this study, the experimental results performed to verify the performance of the thermal and wind panels were analyzed, and the characteristics and performance characteristics of the thermal and wind panels were investigated. The conclusions drawn from this study will be useful in terms of the design and development of shielding.
        4,000원
        39.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 Froude 수 1.0으로 운항하는 길이 약 10m 급 소형 고속선박의 에너지 효율 설계를 위해 선미부에 트림 탭을 부착하였고, 선저 면과의 각도에 따른 항주자세와 저항성능의 변화를 살펴보았다. 성능 해석은 CFD 해석을 통해 수행되었으며, 축척에 의한 영향을 보기 위해 모형선과 실선에 대해 각각 해석을 수행 후 두 결과로부터 예측된 실선의 성능을 비교하였다. 나선에 대한 해석 결과는 두 결과가 전반적으로 유사하였고, 트림 탭이 부착된 경우 선저 면과의 각도가 동일할 때 자세 변화량이 달라 전 저항의 차이로 이어졌지만 자세에 따른 저항 변화 경향은 유사하였다. 이로부터 축척 효과가 있더라도 저항 저감 경향으로부터 최적 항주자세를 찾을 수 있으나, 트림 탭에 의한 자세 변화와 실선 주위 유동의 특성을 알기 위해서는 실선에 대한 직접적인 해석이 필요함을 알 수 있다.
        4,300원
        40.
        2021.05 구독 인증기관·개인회원 무료
        This study pursues to solve a batch of nonlinear parameter estimation (NPE) problems where a model interpreting the independent and the dependent variables is given and fixed but corresponding data sets vary. Specifically, we assume that the model does not have an explicit form and the discrepancy between a value from a data set and a corresponding value from the model is unknown. Due to the complexity of the problem, one may prefer to use heuristic algorithms rather than gradient-based algorithms, but the performance of the heuristic algorithms depends on their initial settings. In this study, we suggest two schemes to improve the performance of heuristic algorithms to solve the target problem. Most of all, we apply a Bayesian optimization to find the best parameters of the heuristic algorithm for solving the first NPE problem of the batch and apply the parameters of the heuristic algorithm for solving other NPE problems. Besides, we save a list of simulation outputs obtained from the Bayesian optimization and then use the list to construct the initial population set of the heuristic algorithm. The suggested schemes were tested in two simulation studies and were applied to a real example of measuring the critical dimensions of a 2-dimensional high-aspect-ratio structure of a wafer in semiconductor manufacturing.
        1 2 3 4 5