Feeding is the most basic activity of daily living(ADL) necessary for survival from birth and throughout the life span. Handicapped children who have feeding problem may have abnormal feeding behavior like tongue thrust, swallowing difficulty, lack of jaw stability, lack of chewing, and drooling etc. The occupational therapist designing oral motor treatment must have both complete understanding and experience of oral motor problem which handicapped children may have had .and treatment technique. Thus, this paper has the purpose to pro-vide an overview of evaluation and treatment of oral motor function.

This study was conducted to evaluate the effect of phosphorus acid (H3PO3) addition to the horticultural bed soil on the initial growth of red pepper (Capsicum annuum L. cv.), cucumber (Cucumis sativus L. cv.), and kimchi cabbage (Brassica campestris L. ssp. pekinensis (Lour.) Rupr. cv.). The stem heights of red pepper and cucumber were 46.1% and 23.0% greater in the 50 mg/L of phosphorus acid treatment than the untreated (control). Further, the stem diameter of pepper and cucumber were 48.7% and 23.0% greater in the 50 mg/L of phosphorus acid treatment than the control. In addition, the number of kimchi cabbage leaves was 47.5% greater in the 50 mg/L of phosphorus acid treatment than the control. The dry weights of red pepper, cucumber and kimchi cabbage were 72.9%, 16.5%, and 30.4% heavier in the 50 mg/L than the control, respectively. Cations (K, Ca, and Mg) and total phosphorus (T - P) were quantitatively analyzed for these three horticultural crops. The concentrations of K, Ca, and Mg, and T - P were higher in the 50 mg/L of phosphorus acid than the control, respectively. Based on the results obtained in this study, it appears that treatment of phosphorus acid in horticultural bed soil enhanced the growth of red pepper, cucumber and Kimchi cabbage.

The purpose of this study was to evaluate the mixed treatment of compost tea and amino acid liquid fertilizer as a substitute of oil cake for the organic cultivation of maize in Goesan, Chungbuk province. As a result, nitrogen, phosphoric acid, potassium, calcium and magnesium contents of each organic fertilizer were in the order of oil cake > amino acid fertilizer > compost tea. Each of these organic fertilizers had little influence on the change of soil chemical. Individual treatment of amino acid fertilizer and oil cake for weight of an ear as well as all individual treatments for the fresh weight of 100 kernels showed significant increase, compared to the untreated control. For the corn yield of merchantable quality, each treatment of compost tea, amino acid liquid fertilizer and oil cake increased higher 3.9, 5.4 and 5.9% than untreated control, respectively. On the other hand, as a result of mixed treatment of amino acid fertilizer and compost tea, the change of soil chemical property was insignificant. The mixed treatment, Nonetheless, showed significant increase for stem height to 1st ear, grain setting length in an ear, weight of an ear, and fresh weight of 100 kernels, compared to the oil cake as a control. After all, the corn yield of merchantable quality produced by the mixed treatment was 3.9% higher than the control. Therefore, our study would be considered that the mixed treatment of amino acid and compost tea is one of organic materials that can replace oil-cake in maize.

산업화, 도시화로 인해 수자원의 오염이 악화 되면서 기존에 염소를 이용한 정수처리 방법으로는 깨끗한 물을 공급하는데 어려운 실정이다. 이에 오존을 이용한 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 기존의 방수⋅방식 공법으로 사용되는 에폭시계 방수⋅방식제 및 스테인리스는 오존의 강력한 산화력으로 인해 열화되어 박리 등 문제 발생하였으며, 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 이에 따라 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 에 따른 내오존성 평가를 실시하였으며, 실제 하수처리장 환경에서의 전기화학적 안정성능 평가를 실시하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타났으며, 하수처리장 환경에서의 전기화학적 안정성능 평가 결과 용사금속 Ti가 403.83k∙ Ω∙cm2의 가장 높은 분극저항을 나타남으로써 높은 수준의 내구성을 확보하는 것을 확인할 수 있었다.

기존의 정수처리 방법으로는 제거되지 않는 물질이 발생함에 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 오존을 이용한 고도정수처리 시설의 내부 방수·방식재는 오존의 산화력에 의해 열화되며 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처 리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 및 피막의 표면처리 방법에 따른 내오존성 평가를 실시하였으며, 오존처리 후의 부착강도를 평가하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타 났으며 표면처리 방법으로는 테프론계 봉공처리제를 사용하여 마감하는 것이 내오존성 및 부착성능 확보에 가장 적합한 방법이라 판단된다.

In this research, the target process was a modified type of a conventional aeration tank with four different influent feeding points and alternated aeration to obtain nitrogen removal. For more accurate switching of influent feeding, the process was operated under a designed control strategy based on monitoring of NH4-N and NOX-N concentrations in the tank. However, the strategy did have some limitations. For example, it was not sensitive to detecting the end of each reaction when losing the balance between nitrification and denitrification of each opposite part of biological tank. To overcome the limitations of the existing control strategy, a diagnosis-based control strategy was suggested in this research using the diagnosis results classified as normal (N), ammonia accumulation (AA) and nitrate accumulation (NA). Using the pre-designed rules for control actions, the aeration and volume of the aerated part of the reactor could be increased or decreased at a fixed mode time. In simulations of the suggested diagnosis-based control strategy, the NH4-N and NOX-N removal rates in the reactor were maintained at higher levels than those of the existing control strategy.

수은의 노출로부터 인간의 건강과 환경을 보호하기 위해 수은에 관한 미나마타 협약(Minamata Convention on Mercury)이 UNEP에 의해 2013년 10월에 채택되었다. 협약문 제11조에서는 3가지 종류의 수은폐기물에 관한 내용을 다루고 있다. 이 중 수은오염폐기물이 가장 큰 비중을 차지하며 산업시설로부터 다양한 종류의 부산물로써 환경으로 배출된다. 국내 산업시설에서 배출되는 수은오염폐기물은 폐기물관리법 공정시험법에서 지정하고 있는 용출시험법에 지정폐기물 또는 산업폐기물로 분류되고 있다. 본 연구에서는 산업시설에서 배출된 3가지 종류의 고상시료(생활폐기물 소각시설 비산재, 의료폐기물 소각시설 비산재, 비철금속 재련시설 폐슬러지)의 적정처리를 위해 안정화기술을 적용하였다. 환경에서 수은은 HgCl2, HgS, HgO 등의 형태로 존재하며 각 화합물은 열적안정도 또는 용해상수가 서로 다르다. 이와 같은 이유로 수계나 토양으로의 유출특성과 안정도를 알아보기 위해 총 5단계의 용출용매로 구성된 단계적 용출법(Sequential Extration Procedure, SEP)을 적용하였다. 용출용매로써 0.5M NH4Cl(1단계), 0.01M HCl+0.1M CH3COOH(2단계), 1M KOH(3단계), 12M HNO3(4단계) 및 Aqua regia(5단계)를 사용하였다. 1,2단계에서 용출된 수은화합물의 경우 다른 단계에 비해 이동도가 커 자연조건에서 쉽게 용출될 가능성이 높다. 3단계는 1,2 단계보다 상대적으로 강한 구조로 결합된 화학종이 용출된다. 4,5단계에서 용출된 수은화합물은 안정도가 높고 이동도가 낮아 자연조건에서 용해되기 어려운 화학종이라고 판단된다. EDTA는 중금속의 이동성을 높여주며 용액에 이온화된 상태로 수은화합물을 전환시켜 오히려 용출률을 높여 줄뿐만 아니라 수용액 상태로 용해시키기 위해서는 pH를 높여줄 첨가물이 필요하다. 이를 위해 Na2S를 사용하였고 Na로 인한 용액의 pH 상승과 S2-를 이용하여 이온화된 Hg2+를 HgS로 전환하여 더욱 안정화된 수은화합물을 형성하였다. 이를 확인하기 위해 안정화 처리 후 발생된 고상시료를 대상으로 단계적 용출법을 재적용 하였으며 5단계의 비율이 증가하는 것을 확인하여 안정화 처리기술을 검증하였다.

The Stockholm Convention is an agreement to reduce POPs use, production and emissions. POPs are highly toxic substances and can not be decomposed in their natural state. It has the characteristic of long distance movement. In this study, we calculated the theoretical air volume based on the result of element analysis. Considering that the inside of the reactor is small, more than 10 times of the air ratio was injected. Also, the retention time was set to 4 seconds or longer by giving a margin. The incineration temperature was 850℃ and 1,100℃ degrees. As a result of thermogravimetric method analysis, the weight of chlorine-based flame retardant-containing wastes was 300∼600℃, and that of organic chlorine-based pesticides was 200∼400℃. On the basis of this, it was experimentally investigated whether the environmentally stable incineration is achieved when the sample is thermally treated using lab-scale, 1 kg/hr. As a result of analyzing five kinds of exhaust gas, the concentration of O2 was high, but the amount of CO was decreased. It is considered that complete combustion is difficult because of the small size of the furnace due to the nature of lab-scale. The chlorinated flame retardants had a decomposition rate of 100 % and the average organochlorine pesticides were 99.9935%. Considering the decomposition rates of chlorinated flame retardants and organochlorine containing pesticide derived wastes derived from this study, incineration treatment at over 2 tons/hour, which is a conventional incinerator, is considered to be possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it is considered possible to operate at more than 1,100℃.

Recently, Advanced water treatment facilities with Ozone are being introduced domestically. However, waterproofing/corrosion prevention construction method of concrete structure for existing advanced water treatment makes waterproofing/corrosion prevention materials and concrete deteriorated because of strong oxidation of ozone. Therefore, in this study, It was evaluated in ozone resistance and bond strength of metal spraying coating.

The purpose of this study was to evaluate the applicability of the microbial fuel cell for the combined treatment of food waste water and landfill leachate. Contents of the study was to develop a carbon-containing electrode material radially to maximize microbial attachment. Also to evaluate the electric energy production efficiency by combining the electrode surface coating technology. By using a microbial fuel cell organic matter and nitrogen removal efficiency is evaluated for the food waste water and landfill leachate. BET to evaluate the surface characteristics of the developing electrode (Brunauer Emmett Teller) To evaluate the coating adhesion through measurement and to evaluate the adhesion characteristics micro-organism Weighing. Excellent electrical conductivity in the development electrode platinum, cobalt, by coating a catalyst such as palladium and to evaluate the electric energy generation efficiency. Lab. scale reactor capacity is a 5 L, and to configure the cross-section and the oxidizing electrode as cathode sequentially added.

일월탄광에는 산화조, SAPS, 소택지의 3단계 자연정화시설이 설치되어 있으며 갱내수를 모아 정화한 후 주변 하천으로 유출시키고 있다. 일월탄광 갱내수의 pH 값은 계절에 관계없이 2.28-2.42로 낮은값을 나타내지만 산화조를 거치는 동안 pH 값은 6.17-6.53 급격하게 증가한다. 정화시설에 의한 정화효율은 SO4, Mg, Al, Ca, Mn은 각각 약 50%, 40%, 100%, 24%, 59%이다. 갱내수의 Fe는 아주 낮은값(1.06-1.09 ㎎/ℓ)이지만 정화시설을 거치는 동안 100%의 제거효율을 나타낸다. 이와 같이 일월탄광에 설치한 정화시설은 pH 상승과 Fe와 Al의 제거 효율은 높지만 SO4, Mg, Ca, Mn 등은 60% 이하로 상대적으로 낮다. 따라서 이러한 이온을 제거하기 위해서는 다른 정화기술을 적용해야 할 것으로 판단된다. pH 2.28-2.42 범위인 갱내수가 유입되는 정화시설 바닥에 침전되는 침전물은 슈워트마나이트이며(Fe8O8(OH)6SO4), pH 5.83-5.96인 침출수에서는 2-line 페리하이드라이트(2-line Fe2O3⋅0.5H2O)가 침전된다.

We compared the applicability and economical efficiency of peroxone process with those of ozone process in the existing water treatment plant on downstream of Nakdong River. After comparing the peroxone process for removing geosmin with the ozone process in lab scale test, peroxone process showed much higher removal efficiency than the ozone process at the same ozone dosage. Proper range of H2O2/O3 ratio were 0.5~1.0 and the half-life of geosmin was about 5.5~6.8 min when the H2O2/O3 ratio was set to 0.5 during 1~2 mg/L of ozone dosage. Peroxone process could reduce the ozone dosage about 50 to maximum 30% for the same geosmin removal efficiency compared to the ozone process in the pilot scale test. In case of 1,4-dioxane treatment, peroxone process could have 3~4 times higher efficiency than ozone process at the same ozone dosage. The results of estimating the economical efficiency of ozone and peroxone process for treating geosmin and 1,4-dioxane by using pilot scale test, in case of the removal target was set to 85% for these two materials, the cost of peroxane process could be reduced about 1.5 times compared to ozone process, and in the same production cost peroxone process could have 2~3 times higher removal efficiency than ozone process. The removal efficiency by peroxone process showed a large difference depending on the physicochemical characteristics of target materials and raw water, therefore detailed examination should be carried out before appling peroxone process.

This study, changes in raw water quality is to indicate on the efficiency of ozone treatment of each pollutant as compared to derive the appropriate operating measures. The appropriate selection for injection rate of pre-ozone and did not inject pre-ozone assess changes in the water. When good water quality, you not injected of pre-ozone to evaluate the economic efficiency of electricity and put the most cost-effective ozone concentration were evaluated. Evaluation remove organic matter and chlorophyll-a concentration level in experiments with each factor of the water DOC> 2.5 ㎎ / L, THMFP> 70 ㎍ / L, Chl-a> 30 ㎎/ ㎥or less constant process, if you do not need to put pre-ozone showed little impact. It also does not put you in pre-ozone appropriate produce enough power rate savings was calculated as approximately 90 million won. Ability to remove organic materials and the ability to produce disinfection byproducts, and cost-effective decisions by considering the concentration of injection if pre-ozone 1 mg/L was investigated by the appropriate concentration of ozone injection.

Thermal processing of (+)-catechin was carried out at 121℃ for different reaction times (1, 2, 3, 6, and 12 h). The reacted products, compounds (1) and (2), were isolated and quantified via HPLC analysis. The antioxidant properties of processed (+)-catechin and its isolated compounds for different reaction time was measured via radical scavenging assays using DPPH and ABTS+ radicals. Additionally, the anti-obesity efficacy of the thermal treated (+)-catechin was evaluated via porcine pancreatic lipase assay. The reacted (+)-catechin for 3 h had a slightly higher antioxidant capacity than that the parent (+)-catechin. Products 1 and 2, which were isolated from the reacted mixture during 3 h, showed an antioxidant capacity, and these two compounds may be responsible for the antioxidant capacity of processed (+)-catechin. Simple thermal treatment of (+)-catechin can be used to produce (+)-epicatechin (1) and protocatechuic acid (2) with enhanced antioxidant and anti-adipogenic effects.

본 연구는 방사선 치료실 벽면 거리에 따른 표층선량과 심부선량에 관하여 알아보고자 한다. 선형가속기에서 발생 하는 고에너지 광자선은 치료기 헤드, 콜리메이터, 환자, 치료실내의 모든 벽과 물질들에 의하여 많은 산란선이 발생된 다. 산란선의 측정은 열형광선량계(TLD)를 사용하였다. 선형가속기의 회전중심으로부터 벽까지의 거리는 236, 272, 303과 337 cm로 측정되었다. 6 MV 광자선을 100 cGy와 200 cGy를 조사한 결과 벽까지의 거리가 짧은 236 cm에서 표층선량은 0.49, 0.83 mSv이고, 272 cm에서는 0.41, 0.53 mSv, 303 cm에서는 0.28, 0.57 mSv, 337 cm에서는 0.33, 0.76 mSv로 각각 나타났다. 치료실 벽의 거리에 따라 표층선량은 현저한 차이를 나타내었다. 이러한 결과는 방 사선 치료환자의 확률적영향과 관련하여 유용한 자료로 활용될 것이다.