The aim of experimental evaluation is to investigate the effect of wear resistance on 3D printing FDM(Fused Deposition Modeling). For this purpose, ABS(Acrylonitrile Buadiene Styrene) material was applied to test of wear-resistance. Ball-on-disk wear test has been performed using steel balls to determine the variation of tribological characteristics. Friction coefficient, wear loss and friction force showed a difference in the respective test conditions.

전 세계적으로 대두되고 있는 물 부족 현상을 해결하기 위하여 하수재이용과 해수담수화 공정의 관심이 높아지고 있다. 특히, 정삼투-역삼투 융합공정은 해 수를 유도용액으로, 하수처리수를 유입수로 하여 정삼투 공정에서 유도용질의 회수 없이 희석된 해수를 역삼투 공정을 통해 하수재이용과 해수담수화를 동시 에 달성할 수 있는 공정으로 최근 각광받고 있다. 이 융합공정은 정삼투 공정과 역삼투 공정의 단점을 상호 보완하는 저에너지 공정으로 차세대 해수담수화 시장을 이끌어 나갈 것으로 판단된다. 따라서, 본 연구에서는 정삼투, 역삼투 막의 특성과 융합공정의 운영인자를 반영한 공정모사를 통하여 정삼투-역삼투 융합 공정의 소비에너지를 최소화 시킬 수 있는 최적 운영조건을 도출하고자 하였다.

In this paper, we investigate the statistical correlation of the time series for temperature measured at the heat box in the automobile drying process. We show, in terms of the sample variance, that a significant non-linear correlation exists in the time series that consist of absolute temperature changes. To investigate further the non-linear correlation, we utilize the volatility, an important concept in the financial market, and induce volatility time series from absolute temperature changes. We analyze the time series of volatilities in terms of the de-trended fluctuation analysis (DFA), a method especially suitable for testing the long-range correlation of non-stationary data, from the correlation perspective. We uncover that the volatility exhibits a long-range correlation regardless of the window size. We also analyze the cross correlation between two (inlet and outlet) volatility time series to characterize any correlation between the two, and disclose the dependence of the correlation strength on the time lag. These results can contribute as important factors to the modeling of forecasting and management of the heat box’s temperature.

Business processes are often of long duration, and include internal worker's decision making, which makes business processes to be exposed to many exceptional situations. These properties of business processes makes it difficult to guarantee successful termination of business processes at the design phase. The behavioral properties of business processes mainly depends on the data aspects of business processes. To formalize the data aspect of process modeling, this paper proposes a graph-based model, called Data Dependency Graph (DDG), constructed from dependency relationships specified between business data. The paper also defines a mechanism of describing a set of mapping rules that generates a process model semantically equivalent to a DDG, which is accomplished by allocating data dependencies to component activities.

3D스캔-인체 및 의복 모델링-시뮬레이션-패턴 제작 및 검증의 전체 3D 의복제작 프로세스를 원활히 활용할 수 있도록 하기 위하여 3D 그래픽과 CAD 시스템 그리고 3D-2D 직접 패턴 전개 시스템을 이용해야 하는 데 이 때 장애가 되는 것은 3D 시뮬레이션한 가상의복으로부터 정확한 패턴을 추출하는 것이 어렵고, 전반적 과정의 호환이 쉽지 않다는 것이다. 이에 본 연구에서는 인체에 정확히 밀착된 부분과 드레이프가 있는 비대칭형 드레스를 대상으로 전체 프로세스를 원활하게 구동할 수 있는 방법을 모색하였다. 연구 방법으로는 3D 스캔 데이터를 이용하여 Maya로 범용성 3D 인체 모델을 만들고 이 3D 바디 모델에 맞는 3D 드레스를 디자인하고 모델링한 후, Rapidform, 2C-AN 프로그램과 YukaCAD를 이용하여 정확한 2D 패턴을 제작하는 과정의 호환성을 해결하며 진행하였다. 이 과정에서 도출한 패턴을 실제 의상으로 제작하여 착의 시킨 후 3D 의복 모델과의 여유분 분포를 3차원 측정 기술로 검증하였고 실물 드레스의 드레이프의 모양과 시뮬레이트된 드레스의 모양을 검토하였다. 그 결과 제시한 방법을 활용하면 전반적으로 만족스럽게 정량적인 3D 의복 제작 프로세스를 운영할 수 있음을 확인하였다.

  In this paper, we present a systematic approach to translating BPML (Business Process Modeling Language) into the π-Calculus. BPML is an executable business process modeling language, like BPEL4WS (Business Process Execution Language for Web Services).

Many enterprise find process modeling to be an effective approach in competitive global market. In this paper, we investigate the comparision of characteristics for process modeling methodologies. The purpose of this paper is to propose information to company for successful process modeling.

Step-feed process for biological nitrogen removal were analyzed numerically for the each unit and final total nitrogen(TN) effluent by water quality management(WQM) model and the results were compared data from these wastewater treatment plants. No bugs and logic error were occurred during simulation work. All of the simulation results tried to two times were obtained and both results were almost same as this model has become good reappearance. It was concluded that most of nitrogen removal occurred in the first oxic tank. Thus the controlling of the first anoxic tank may be more important in term of nitrogen removal. Also each unit of simulation result was kept good relationship with that of measured data. Accordingly this WQM model has good reliance. Finally, WQM model can predict final TN effluent within ±6.0mg/l.

In this paper we presented numerical method for the simulation of powder injection molding filling process, which is one of the key processes in powder injection molding. Rheological properties of powder binder mixture such as slip phenomena and yield stress were introduced into the numerical analysis model of powder injection molding filling simulation. Numerical model can be classified into two types. One is 2.5D model which can be introduced to a arbitrary thin geometry and the other is full 3D model which can be applied to a general 3D shape. For 2.5D model we showed the validity of our CAE system with several verification examples. Finally we suggested flow analysis model for 3D powder injection molding filling simulation.

평판형 모듈 설계의 최적화를 목적으로 feed 흐름 조건에 따른 feed 온도 및 유속분포를 예측할 수 있는 모델식을 확립하였고 모델 모사를 통해 흐름 조건들이 온도 분포에 끼치는 영향들을 조사하였다. 모델내의 유체의 Re 크기가 커지면 채널 두께방향으로의 유속 구배가 커질 뿐 아니라 투과물 증발을 위한 에너지원인 feed 흐름 속도가 커져 물질 및 열흐름이 증가하여 투과물 증발로 인한 feed 온도 강하가 증어든다. 반면에 채널 간격이 작아지면 feed 흐름량이 상대적으로 작아져 급격한 온도 강하를 야기시킨다. Re 크기에 따른 feed 온도 변화는 실험결과와 일치함이 관찰되었다.

The efficiencies of Gang-Byeon sewage treatment facilities, which are based on GPS-X modelling, were analysed and used to design recycle water treatment processes. The effluent of an aeration tank contained total kjeldahl nitrogen (TKN) of 1.8 mg/L with both C-1 and C-2 conditions, confirming that most ammonia nitrogen (NH3 +-N) was converted to nitrate nitrogen (NO3 --N). The concentrations of NH3 +-N and NO3 --N were found to be 222.5 and 227.2 mg/L, respectively, with C-1 conditions and 212.2 and 80.4 mg/L with C-2 conditions. Although C-2 conditions with higher organic matter yielded a slightly higher nitrogen removal efficiency, sufficient denitrification was not observed to meet the discharge standards. For the total nitrogen (T-N) removal efficiency, the final effluent concentrations of T-N were 293.8 mg/L with biochemical oxygen demand (BOD) of 2,500 mg/L, being about 1.5 times lower than that (445.3 mg/L) with BOD of 2,000 mg/L. Therefore, an external carbon source to increase the C/N ratio was required to get sufficient denitrification. During the winter period with temperature less than 10 , the denitrification efficiency was dropped rapidly even with a high TKN concentration (1,500 mg/L). This indicates that unit reactors (anoxic/aerobic tanks) for winter need to be installed to increase the hydraulic retention time. Thus, to enhance nitrification and denitrification efficiencies, flexible operations with seasons are recommended for nitrification/anoxic/denitrification tanks.

We have proposed modeling methods of mariners' standard behavior for collision avoidance by analyzing mariners' recognition process in a previous study. As a subsequent study, the aim of this study is to build a model of mariners' execution process which is one of six processes in the condition of collision avoidance. In this study, thus, the structure of mariners' information processing on the process of taking avoiding actions is described and the relation between mariners' behavior and necessary factors in the process is analyzed. And then we have built a model of mariners' standard behavior for execution process based on the characteristics of mariners in ship-handling, which are obtained from the international collaborative research on human factors. It is tried to define the contents of execution process based on the standard behavior of mariners for collision avoidance and to formulate information processing of mariners.

지표수의 수문순환 및 성분의 변동 영향 요소로는 강우, 증발, 토양수분 등의 자연적인 요소와 도시화 및 유역내 저류시설물 등의 인위적인 요소가 있다. 특히, 장기 유출 변동에 영향을 끼치는 인위적인 요소 중 저류시설을 대표적으로 들 수 있는데, 이들 영향은 단기적으로는 유출 감쇄특성의 변화, 장기적으로는 저류량 증가에 따른 건기 계절유량의 증가, 년 유황 또는 유출 특성의 변화 등의 영향을 예측할 수 있다. 우리나라와 같은 인공 저류시설이 산재한 지역에

This paper deals with a mathematical model which explains process of aquisition or skillfulness of human. Especially, in the case of determinating a ship's position, a degree of aquisitiion or skillfulness has a significant meaning in the view point of reliability of a data because it is closely connected with the position error. In this paper, the authors have obtained the following mathematical model, who analyzed quantitavely the data obtained by a process of measuring the horizontal sextant angles and extracted the factors or parameters affecting the process of aquisition or skillfulness of human. Namely, H=Me-iN M : the coefficiency which represent the degree of difficulty in measuring the object i : personal parameter N : the number of measurements