검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 107

        21.
        2019.12 KCI 등재후보 구독 인증기관 무료, 개인회원 유료
        A 7-year-old, intact, female Siberian husky was presented to the Veterinary Medical Center of Chungbuk National University because of vomiting and diarrhea after a fight with a cohabiting dog. Physical examination, radiography, abdominal ultrasonography, and laboratory examination were performed. The dog was diagnosed with pyometra and 10% dehydration. On electrolyte, Na and Cl ion concentration were lower than normal values and Ca ion concentration was slightly lower than normal values. On blood chemistry, blood urea nitrogen and alkaline phosphatase value were extremely higher than normal values. Neutrophil was observed as hypersegmentation. On ultrasonography, enlarged uterine body was observed. Uterus was enlarged and filled with echogenic fluid that is seemed to be pus. Uterine horn was rubbing the bladder. In bacterial culture, the colony morphology was smooth, mucoid, and hemolytic. Also, on molecular diagnosis test, both samples from uterine and abdominal fluid were confirmed to be E. coli. This case describes that uterine pus was leakage to abdominal cavity through oviduct, and pus leakage from uterus may be cause septic peritonitis and death. Also, this case must be considered that physical event such as fight against cohabiting dog, strenuous exercise and kiss-off can cause uterine rupture or pus leakage through oviduct from uterus in dog with pyometra.
        4,000원
        22.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Waterworks facilities inevitably experience some amount of leakage even if there is a lot of investment or state-of-the-art technology that is applied such as DMA(District Metered Area) system construction, leakage detection, repair, pipe rehabilitation, etc. The primary reason is the leakage is naturally restored over time. In the UK, this restoration characteristic is defined as NRR(Natural rate of rise of leakage) and used to decision making for prioritizing active leakage control of DMAs. However, this restoration characteristic is well recognized, but researches on NRR in the water distribution system are insufficient in Korea. In this study, the estimation method of NRR was developed suitable for applicating in Korea considering of SCADA data, water infrastructure, and water usage patterns by modification of the UK's NRR method. The proposed method was applied to 9 DMAs and verified it's applicability by comparing with the other water loss performance indicators. It is expected that the proposed method can be used to support decision making for sustainable NRW(Nor-revenue water) management in the water distribution system.
        4,200원
        23.
        2019.06 KCI 등재후보 구독 인증기관 무료, 개인회원 유료
        스프링클러설비에서 누수 하자가 발생되면 설비의 작동을 멈추는 경향이 많고 이는 입주자의 안전에 많은 지장을 초래하게 되며, 누수피해로 재산상의 손실도 발생하게 되므로 스프링클러설비는 화재진압 성능뿐만 아니라 내구성도 높아야 할 것이다. 동관 부식은 스프링클러설비 배관에서 주로 나타나는 특이한 현상으로서 그 동안 제시된 여러 학설들과 법원의 판단 등을 종합하여 검토한 결과, 동관의 부식은 매우 복합적인 요인에 의해 발생되고 있고, 하자보수 방법의 결정요인의 핵심은 보완시공을 통한 부식억제의 가능성 여부를 판단하는 것인데 실증적용 사례 연구 등을 통한 결론을 도출 하였다. 또한 스프링클러설비의 설비의 내구성 강화에 대한 법규적 미비점에 대해서도 연구를 통한 개선방안을 제시하여 향후 하자발생을 줄이고자 하였다.
        7,700원
        24.
        2019.05 구독 인증기관 무료, 개인회원 유료
        In this study, temperature and pressure of guided wave radar products are transmitted at high temperature and high pressure. In the case of transmission of temperature pressure, high temperature and high pressure steam leak from the guide rod part to the atmosphere causes the failure. Therefore, in this study, structural analysis and thermal flow analysis of the product are performed to identify the problem of the product, so as to prevent leakage in the product development by grasping the cause of the leakage of the product. In this study, if the method of assembling the lower end of the piston rod and the gasket is changed from line contact to face contact,
        4,000원
        28.
        2018.08 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        An effective cleaning method for Ni removal in Ni-induced lateral crystallization(Ni-MILC) poly-Si TFTs and their electrical properties are investigated. The HCN cleaning method is effective for removal of Ni on the crystallized Si surface, while the nitric acid treatment results decrease by almost two orders of magnitude in the Ni concentration due to effective removal of diffused Ni mainly in the poly-Si grain boundary regions. Using the HCN cleaning method after the nitric acid treatment, re-adsorbed Ni on the Si surfaces is effectively removed by the formation of Ni-cyanide complexions. After the cleaning process, important electrical properties are improved, e.g., the leakage current density from 9.43 × 10−12 to 3.43 × 10−12 A and the subthreshold swing values from 1.37 to 0.67 mV/dec.
        4,000원
        30.
        2018.05 구독 인증기관·개인회원 무료
        고온형 고분자 전해질 막 연료전지 (HT-PEMFC)는 100°C 이하의 저온 고분자전해질 운영 시스템에 비해 개선된 전극 반응 동역학, 뛰어난 물 및 열 관리, 연료 불순물에 대한 내성 및 폐열 이용과 같은 많은 이점을 제공한다. 그러나 HT-PEMFC는 구동 중 발생하는 물의 증발과 함께 분리막 내 인산이 증발하여 성능이 낮아진다는 단점이 있다. 때문에 본 연구에서는 이러한 인산의 유출에 대한 핫 프레스 유무, 전극 GDL 종류, 분리막 가수분해 조건, 셀 성능에 따른 영향을 인산의 비색정량을 통해 분석하였다. 그 결과 인산의 유출량은 주로 셀성능에 영향을 받으며 GDL이 치밀할수록 억제됨을 확인하였다.
        33.
        2018.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        ISU (In-arm hydropneumatic Suspension Unit) are popularly applied to recently developed tracked vehicles because of better performance of ISU than the one of the conventional HSU (Hydraulic Suspension Unit). However, function deterioration and malfunction phenomena of the several ISUs were observed due to leakage of hydraulic fluid during operation of the tracked vehicles. The objective of this study is the investigation of fundamental leakage mechanism of hydraulic fluid for the ISU. The leakage mechanism was investigated by comparing both results of the technical data analysis and overhaul inspection of the ISU which occurred leakage of hydraulic fluid. Finally, the leakage mechanism found in the current investigation was verified by using experimental methods.
        4,000원
        34.
        2017.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A real scale leakage test facility was developed to study the leak signal characteristics of water supply pipelines, and then leak tests were carried out. The facility was designed to overcome the limited experimental circumstances of domestic water supply pipeline experimental facilities. The length of the pipeline, which was installed as a straight line, is 280m. Six pipes were installed on a 70m interval with different pipe material and diameters that are DCIP(D200, D150, D100, D80), PE(D75) and PVC(D75).The intensity of the leakage is adjusted by changing the size of the leak hole and the opening rate of ball valve. Various pressure conditions were simulated using a pressure reducing valve.To minimize external noise sources which, deteriorate the quality of measured leak signal, the facility was built at a quiet area, where traffic and water consumption by customers is relatively rare. In addition, the usage of electric equipment was minimized to block out noise and the facility was operated using manual mode. From the experimental results of measured leakage signal at the facility, it was found that the signal intensity weakened and the signal of high frequency band attenuated as the distance from the water leakage point increased.
        4,200원
        35.
        2017.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The estimation method of economical leakage management target utilized upon planning business for improvement of revenue water ratio in South Korea is presented and applicability of methods developed in this study is assessed through application on site. With a consideration of revenue water ratio in application target area, estimation method of long-term economical leakage management target is applied. Three leakage reduction methods such as replacement of residual aged pipe, leakage investigation and restoration and water pressure management are applied with a consideration of characteristics of site. Due to difficulty of obtaining data, analysis of cost/benefit by leakage reduction methods is performed by applying method of leakages estimation equation among statistical methods. As a result of application, revenue water ratio corresponding to long-term economical leakage management target is 91.6 %.
        4,300원
        36.
        2017.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 와이어로프 손상의 정량화를 위하여 먼저 동일한 소재 및 직경을 가지는 강봉을 이용한 누설자속기반 결함 탐상 연구를 진행하였다. 현재까지 국외 및 국내에서 누설자속탐상 기법을 이용하여 결함을 탐상하는 연구가 많이 진행되어 왔지만, 그 손상을 진단하는 것에 그쳐 손상의 정도를 판별하여 그에 따른 적절한 조치를 취하는 것에 어려움이 있다. 따라 서 본 논문에서는 전자기적 유한요소 해석 프로그램을 이용하여 누설자속탐상 시스템을 모델링하였으며 강봉을 강자성체 시편으로 이용하여 누설자속탐상 시뮬레이션을 진행하였다. 또한 시뮬레이션 결과를 검증하기 위하여 실제 강봉에 시뮬레이 션과 동일한 종류의 손상을 가공하여 결함탐상 실험을 진행하였다. 시뮬레이션과 실험 데이터를 분석한 결과 탐상 속도는 신호의 크기에 미소한 영향을 주었으며, 손상의 너비 변화에 따라 신호의 크기가 동일하지 않음을 검증할 수 있었다. 본 분 석을 토대로 깊이 손상과 너비 손상에서의 신호 특성을 추출하여 손상의 종류를 분별할 수 있었고, 역으로 추출된 신호의 특 성을 이용하여 손상의 종류를 판별할 수 있는 가능성을 확인하였다.
        4,000원
        37.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this project, ECP(Electrical conducting polymer) gasket is used to detect the leakage of chemicals inside the reservoir. It is necessary that the electrical signal between ECP gasket and chemical leakage should be detected to protect the critical accident. This research introduce the leakage detection method to measure the electrical resistance of the cracked prototype pipe installed ECP gasket. Also the Arduino program is set to monitor the incident of chemical leakage.
        4,000원
        38.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        가스 터빈은 기동 및 정지 횟수가 많기 때문에 열피로나 취화 현상으로 인한 가스터빈 케이싱의 균열 또는 케이싱의 플랜지면에서 고온고압 가스의 누설이 발생할 가능성이 높다. 따라서 가스터빈 케이싱의 구조안전성 및 플랜지면에서의 누설평가는 반드시 수행되어야 하는 부분이다. 본 논문에서는 유한요소해석을 바탕으로 터빈 케이싱의 ASME B&PVC VIII-2 구조안전성 평가 및 접촉압력을 통한 누설 평가 그리고 볼트의 구조안전성 평가를 진행하였다. 또한 가스터빈 케이싱의 유한요소모델링 및 해석/평가 방법을 제안하여 가스터빈 개발에 활용할 수 있게 하였다.
        4,000원
        39.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        가스 터빈은 기동 및 정지 횟수가 많기 때문에 열피로나 취화 현상으로 인한 가스터빈 케이싱의 균열 또는 케이싱의 플랜 지면에서 고온고압 가스의 누설이 발생할 가능성이 높다. 따라서 가스터빈 케이싱의 구조안전성 및 플랜지면에서의 누설평 가는 반드시 수행되어야 하는 부분이다. 본 논문에서는 유한요소해석을 바탕으로 터빈 케이싱의 ASME B&PVC VIII-2 구 조안전성 평가 및 접촉압력을 통한 누설 평가 그리고 볼트의 구조안전성 평가를 진행하였다. 또한 가스터빈 케이싱의 유한 요소모델링 및 해석/평가 방법을 제안하여 가스터빈 개발에 활용할 수 있게 하였다.
        4,000원
        40.
        2015.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 와이어로프의 국부손상 검색을 위해 누설자속기법을 적용하였다. 와이어로프 구조물에 적용하기 위해 리프트오프의 발생을 최소화한 4채널 누설자속 센서헤드를 제작하였고, 이를 사용하여 와이어로프의 국부손상 검색실험을 수행하였다. 국부손상 검색실험을 위해 와이어로프를 준비하였고, 다양한 원주방향을 가지는 부분 단선 손상들을 발생시켰다. 제작된 자속누설 센서헤드를 이용하여 와이어로프 시편의 자속신호를 스캔하였고, 노이즈의 영향을 최소화하고 자속신호의 해상도를 향상시키고자 자속 신호를 미분하여 순간변화량을 손상 검색에 활용하였다. 객관적인 손상 판단을 위해 각 채널에서 계측된 자속신호를 GEV분포를 이용해 설정된 임계값과 비교하였다. 최종적으로 임계값을 초과한 부분의 길이방향 및 원주방향 위치를 실제 손상과 비교함으로써 본 기법의 국부손상 검색 가능성을 살펴보았다.
        4,000원
        1 2 3 4 5