Fire Protection Qualification in the United States is Government Qualification. The State Government controls and NCEES(National Council of Examiners for Engineering and Surveying) and NSSB(National Skill Standards Board) operates. The standard of exam has been run establishing standards for industrial sites. It is possible to take a qualification test should have to have academic ability with career. Also, there is a regulations of education training before and after acquisition of capacity and especially after acquisition of capacity is more revved up. Punishment and standards of administrative measure is strong, so if someone act behavior against the law, open him to the public on a certain website and the record is maintained forever.

일본의 소방자격은 국가자격이며 자격운영은 총무성 산하 소방청에서 소관하고 소 방시험 연구센터에서 수탁하여 관리·운영하도록 되어 있다. 또한 국가기술자격으로 소 방설비사, 위험물취급자가 있으며 국가전문자격은 존재하지 않는다. 검정방법은 소방 설비사인 경우 객관식과 주관식을 병행하고 있지만 위험물취급자는 객관식으로만 되 어있다. 또한 소방설비사, 위험물취급자 두 자격 모두 실기시험은 존재하지 않는다. 계 속교육제도인 보수교육을 실시하고 있어서 산업현장의 변화에 적절히 대응하고 있다..

The special organization that our military service is conscripted by the duty of national defense purposes to the period of military service. So couple of soldiers are think as the corresponds to college, or some knowledge layer from the operating management discarding period, lifetime value. But, now a day changed of the military life, it is when the individual soldiers can have some self-development and the lifelong education in terms of a period, and can changeing the footsteps of the new life that the function as a 'bridge' to activate production of barracks life. So that it can be supported themselves need to strive for human resource development. This study is being discussed on the correlation of military human resources and qualified operating and sustainable and promising future eligibility for qualified by taking advantage of the Boston Consulting Group Matrix(Boston Consulting Group Matrix).

Although the national technical qualification scheme has a historical background for thirty-five years, it hasn't any study of an obvious cause analysis, effective counterplan and analysis relation to its historical changes. This paper analyses the internal and external factors of technical qualification policy of the Human resources development service of Korea using PEST and SWOT and surveys the influence on its environment and the variation cause of the ratio of successful applicants to the qualification scheme. This paper also suggests systematically the direction for development of the technical qualification scheme using FMEA. Thus, this study assists to construct rapidly a correspondence system to the environment change simultaneously to determine decision making to the marketing policy.

The construction industry in Korea after the Korean-war has evolved until these days. But the construction industry accident severity rate and frequency is over then the All industry rate. This study analyzed the 'Disaster Statistical Yearbook' of the Korea Occupational Safety and Health Agency, based on the factors that affect construction accidents that is selected and fined the some factors the construction Disaster Prevention Factors. This study will develop the methodology for analyzes that the national qualification is effected to the construction industrial machine disaster prevention status. It suggest two ways to the establishment of disaster trends. First way is the disaster quantitative analysis and second way is comparing the statistical data and the analysis of expert opinion.

Nowadays, our industries and occupation are increased under the economy development of government. So, this paper introduce to compare with coefficient's of correlation on the time series of the education and the qualification in our country. For this reason, the decision making to qualifications' foresight which will be change to the education category-prospective on the time series. The qualification has claasified 5 degrees-master craftsman, professional engineer, engineer, technician(or industrial engineer), craftsman - and 516 qualification items. Education has classified to 4 degrees(7 degrees) - elementary, middle, high, high scholastic level school(college, university, graduation). This paper has matched to educational classification and qualification classification through the following method. We defined the same level between education and qualification after analysed correlation under the time series, so the craftsman equals high school graduation people, technician equals college graduation people, engineer quals university graduation people, now we could not analyse master and professional levels. This paper will suggest to the qualification's future policy direction and improve the education policy direction.

Nowadays, many countries have strived to promote prospective industries and occupations at the national level under the global circumstances such as green growth, job creation and so on. For this reason, the decision making method for qualifications foresight which will be available for the mentioned category-prospective industry and occupation- is required for it's feasibility. Pilot surveys on future workforce demand and promotion policies on service industries which are selected as a prospective industry or occupation by government parties were conducted through this research. Based on them, available qualifications-including not only national(skill) qualification but also private qualification- which can be created for prospective industries and occupations related to green growth and job creation were predicted. On the other hand, observing the change of service industry, occupation and qualification abroad, this research attempts to present the decision making method for verifying the decision' validity on qualification in Korean service industry and related occupation. Applying multicriteria decision making, a preference was examined for checking the validity of the created qualifications by prospective service industries and occupations in both sides-experts and laypeople. Based on it's result, the research was conducted regarding a validity of new qualifications in prospective industries and occupations.

요즘 우리나라에서는 초등학생들에게 한자능력검정시험이 많은 인기를 끌고 있 다. 이에 따라 사교육에서는 학원, 인터넷, 한자학습지 등에서 시험을 대비한 프로 그램이 성행하고 있으며, 한자교육에 대한 관심도 높아지고 있다. 현재 우리나라의 한자능력검정시험에 있어서 초등학생의 응시율이 약 60%나 된다. 이러한 초등학생들의 급수시험의 형태는 일시적이지 않고 연속적이기 때문 에 해마다 응시율도 증가하고 있다. 한편 공교육에서의 초등학교 한자교육은 충분 한 시간적 확보가 마련되지 않아서 체계적인 한자교육이 이루어지지 않고 있으며, 초등학교 교육용 기초한자도 제정되지 않았기 때문에 학년별로 공정하고 통일된 한자교육이 실시되지 못하고 있다. 이러한 공교육의 한자교육 실태는 한자능력검 정시험에 상당한 영향을 끼치고 있다. 공교육에서 채우지 못한 한자교육의 욕구를 사교육의 일환인 한자검정능력시험으로 대신하려는 경향이 있기 때문에 한자능력 검정시험의 인기는 날로 치솟고 있다. 한국의 한자능력검정시험은 일본의 한자능력검정 시험의 체제와 비교해 볼 때 상당한 차이가 있음을 알 수 있다. 한국의 한자능력검정시험의 현황을 살펴보면, 우선 한자능력을 검정하는 기관 이 많고, 이 기관들이 급수를 나누는 기준들이 다르다. 즉, 기준이 되는 국가적 차 원의 초등학교 교육용 기초한자가 제정 되지 않았기 때문에 각 기관별로 급수를 나누는 排定漢字와, 漢字數에 있어서 통일되지 못하고 있다. 이는 한자검정시험 의 전문성을 떨어뜨리고 공증성을 약하게 만들 수도 있다. 또한 각 기관들이 시행 하는 시험일도 다르기 때문에 상업적인 경향도 보인다. 반면 일본은 한자능력검정 시험은 거의 일본한자능력검정협회에서 주관하고 있다. 또한 漢檢의 급수 체제는 학교에서의 한자교육과 연계되어 학교에서 배우는 각 학년별로 배당한자(교육용 기초한자), 1006字를 기준으로 각 등급별로 형성되어 있다. 이는 일본의 漢檢이 공교육에 기반을 두고 시행되고 있는 것을 면밀히 보여주고 있는 것이다. 현재 한국의 한자능력검정시험의 시장은 상당히 크다. 초등학교의 한자과목의 위상을 확립하고 바람직한 한자교육의 체제를 형성하기 위해서는 현행 한자능력 검정시험의 체제를 개선해야 한다. 그러므로 본고에서는 일본의 한자능력검정시 험과의 비교를 통하여 한국의 한자능력검정시험의 문제점을 파악하고 개선책을 제시하는데 의의를 두고자 한다.

As shown in the accident analysis from 2007, it has been found that causes of accidents on large-scale projects are different from those found in general construction projects. A 300-question survey regarding systematic and practical aspects of safety problems at construction sites was distributed to ten (10) different companies. Participants were to respond subjectively, so that the results could be used to assemble the first formal questionnaire survey. They were collected and compiled by an advisory committee for this study. The resulting surveys were then sent to the division chiefs of the top 100 construction companies in Korea, in order to improve the response rate. The Department of Safety & Health Direction, and the :Ministry of Labor, ROK sent the same sheets to medium and small construction companies that placed within 101-200th of all Korea construction companies. The above safety engineers were classified into four (4) levels, from 1st to 4th, followed by the project dollar amount and risk level. Formulae were developed to assign safety engineers to construction sites by engineer level, the project dollar amount, and the project risk level. Conclusions are summarized as follows: 1) Reviewing the assignment system of experienced safety engineers to large scaled projects - The more experienced the engineers assigned to a project, the higher the level of accident prevention. 2) Enforcing the assignment of advanced level safety engineers to large-scaled sites - At least one advanced-level safety engineer should be assigned to construction sites with projects valued at 15million USD (15,000,000,000). 3) For assigning safety engineers by risk level - Twenty models have been developed to calculate the number of safety engineers to be assigned by risk level. In the future, risk level for each job should be established by the government (as is now the practice in Germany).

핵연료집합체 검증 프로그램의 일환으로 본 연구에서는 지진과 배과파단이 핵연료집합체의 건선성에 미치는 영향을 검토하였다 원자로 노심의 상세 동적해석을 이용하여 지진 및 배과파단시 핵연료 집합체에 발생하는 전단력 굽힘 모우멘트 및 변위를 계산하였고 또한 집합체를 지지하고 있는 지지격자체의 충격력을 검토하였다 이들 하중에 대한 핵연료집합체의 응력해석을 수행하여 사고조건하에서의 구조적 건전성에 대하여 언급하였고 추후 설계시 고려할 사항을 제시하였다.

원자력발전소중 안전과 관련된 구조물은 지진의 가능성에 대비하여 그의 구조적 안전성과 가용성이 검중되어야 한다. 본 논문은 원자력발전소 보호시스댐 캐비넷올 예롤 들어 그에 대한 내진검증 방법올 보였다. 캐비넷의 유한요소모델을 작성하여 통특성올 구하였고 그 모우드값을 입력지진스펙트럼과 비교한 결과 구조물의 1 차모우드가 입력스펙트럼의 야앓와 일치함으로써 셜계변경의 필요성이 대두되었다. 이 peak 값을 피하기 위하여 캐비넷의 구조를 변경하였고 변경된 구조물에 대하여 웅답스텍트럽해석과 시간 이력해석올 수행하여 구조적 건전성과 가용성올 보임으로써 설계변경된 캐비넷의 내진검증을 확인하였 다