Non-CO2 온실가스인 염화불화탄소(Chlorofluorocarbons, CFCs)와 수소염화불화탄소(Hydro-Chlorofluorocarbons, HCFCs)는 오직 인류의 경제(산업) 활동에 의해 발생하며 인체에 무해하고 안정한 물질이기 때문에 냉매, 분사제, 발포제 등 여러 분야에서 다양하게 사용되었지만 오존층 파괴물질으로 국제협약인 몬트리올 의정서에 의해 생산과 사용이 규제되었다. 이에 대한 대체물질로써 수소화불화탄소(Hydrofluorocarbons, HFCs)와 과불화탄소(Perfluorinated compounds, PFCs)가 개발되었지만 여전히 높은 지구온난화지수(Global Warming Potential, GWP)를 지닌 것으로 알려져 있다. 또한 국내 HFCs 소비량은 꾸준히 증가하고 있는 추세로 HFCs 중 전기･전자제품 및 자동차에 99% 이상 냉매로 사용되는 HFC-134a(1,1,1,2-Tetrafluouroethane, CH2FCF3)는 물리･화학적으로 안정된 난처리성 물질로써 처리 시 많은 에너지(높은 온도)가 필요하며, 강산으로 알려진 불산(Hydrogen fluoride, HF)의 발생으로 처리시설의 부식을 야기시킨다. 이에 따라 HFC-134a의 안정적이고 효율적인 분해 기술 개발을 위한 연구가 필요하다 사료되며 본 연구는 수직형 관형흐름 반응기를 이용한 촉매열분해를 적용하여 촉매별 HFC-134a 분해효율 연구하고, 각 촉매별 열분해 반응 생성물의 비교를 통해 HFC-134a의 촉매열분해 특성을 알아보고자 하였다.

To analyze human thermal environments in protected horticultural houses (plastic houses), human thermal sensations estimated using measured microclimatic data (air temperature, humidity, wind speed, and solar and terrestrial radiation) were compared between an outdoor area and two indoor plastic houses, a polyethylene (PE) house and a polycarbonate (PC) house. Measurements were carried out during the daytime in autumn, a transient season that exhibits human thermal environments ranging from neutral to very hot. The mean air temperature and absolute humidity of the houses were 14.6-16.8℃ (max. 22. 3℃) and 7.0-12.0 g∙m-3 higher than those of the outdoor area, respectively. Solar (K) and terrestrial (L) radiation were compared directionally from the sky hemisphere (↓) and the ground hemisphere (↑). The mean K↓ and K↑ values for the houses were respectively 232.5-367.8 W∙m-2 and 44.9-55.7 W∙m-2 lower than those in the outdoor area; the mean L↓ and L↑ values were respectively 150.4-182.3 W∙m-2 and 30.5-33.9 W∙m-2 higher than those in the outdoor area. Thus, L was revealed to be more influential on the greenhouse effect in the houses than K. Consequently, mean radiant temperature in the houses was higher than the outdoor area during the daytime from 10:45 to 14:15. As a result, mean human thermal sensation values in the PMV, PET, and UTCI of the houses were respectively 3.2-3.4℃ (max. 4.7℃), 15.2-16.4℃ (max. 23.7℃) and 13.6-15.4℃ (max. 22.3℃) higher than those in the outdoor area. The heat stress levels that were influenced by human thermal sensation were much higher in the houses (between hot and very hot) than in the outdoor (between neutral and warm). Further, the microclimatic component that most affected the human thermal sensation in the houses was air temperature that was primarily influenced by L↓. Therefore, workers in the plastic houses could experience strong heat stresses, equal to hot or higher, when air temperature rose over 22℃ on clear autumn days.

In recent years, waste-to-energy conversion using municipal solid waste (MSW) has been gaining attention in municipalities. Such conversion can reduce the dependency of non-renewable energy such as fossil fuels by generating solid refuse fuel (SRF) and diverting landfilling of the waste, although there is debate over the efficiency and economic aspect of the practice. With a growing interest in the conversion, D city is trying to adopt all possible measures towards achieving a material-cycle society by constructing a waste-to-energy town by 2018. The waste-to-energy town will be comprised of energy recovery facilities such as a mechanical treatment facility for fluff-type SRF with a power generation plant, and anaerobic digestion of food waste for biogas recovery. In this paper, we focus on estimating the energy recovery potentials and greenhouse gas (GHG) reduction of MSW by waste-to-energy conversion under three different scenarios. The data required for this study were obtained from available national statistics and reports, a literature review, and interviews with local authorities and industry experts. The lower heating value was calculated using the modified Dulong equation. Based on the results of this study, the energy recovery potential of MSW was calculated to be approximately 14,201-51,122 TOE/y, 12,426-44,732 TOE/y, and 8,520-30,673 TOE/y for Scenarios 1, 2, and 3, respectively. The reduction of GHG by such conversion was estimated to range from 10,074-36,938 tonCO2eq/y, depending on scenario. This study would help determine the production rate of fluff-type SRF to be converted into a form of energy. In addition, this study would aid waste management decision-makers to clarify the effectiveness of recycling of MSW and their corresponding energy recovery potentials, as well as to understand GHG reduction by the conversion.

This study aims to analyze region-specific trends in changing greenhouse gas emissions in incineration plants of local government where waste heat generated during incineration are reused for the recent five years (2009 to 2013). The greenhouse gas generated from the incineration plants is largely CO2 with a small amount of CH4 and N2O. Most of the incineration plants operated by local government produce steam with waste heat generated from incineration to produce electricity or reuse it for hot water/heating and resident convenience. And steam in some industrial complexes is supplied to companies who require it for obtaining resources for local government or incineration plants. All incineration plants, research targets of this study, are using LNG or diesel fuel as auxiliary fuel for incinerating wastes and some of the facilities are using LFG(Landfill Gas). The calculation of greenhouse gas generated during waste incineration was according to the Local Government's Greenhouse Emissions Calculation Guideline. As a result of calculation, the total amount of greenhouse gas released from all incineration plants for five years was about 3,174,000 tCO2eq. To look at it by year, the biggest amount was about 877,000 tCO2eq in 2013. To look at it by region, Gyeonggido showed the biggest amount (about 163,000 tCO2eq annually) and the greenhouse gas emissions per capita was the highest in Ulsan Metropolitan City(about 154 kCO2eq annually). As a result of greenhouse gas emissions calculation, some incineration plants showed more emissions by heat recovery than by incineration, which rather reduced the total amount of greenhouse gas emissions. For more accurate calculation of greenhouse gas emissions in the future, input data management system needs to be improved.

The Intergovernmental Panel on Climate Change (IPCC) recommended the first order decay (FOD) model for estimating methane emissions from solid waste landfills. However, selecting appropriate parameter is a major challenge in methane emission modeling. The degradable organic carbon (DOC) and the fraction of degradable organic carbon which decomposes (DOCF) are the two primary parameters in the methane generation potential (L0). The DOC is the amount of organic carbon that can be decomposed by biochemical reactions in microorganisms. Chemical analysis methods are currently available to measure the DOC including using total organic carbon and element analysis methods. However, chemical analysis methods are not appropriate for determination of the DOC, which indicated that the DOC should be measured by biochemical tests. In addition, these methods should consider a fossil carbon content that needs a complex and high cost of analysis. The DOCF is an estimate of the fraction of carbon that is ultimately degraded and released from landfills. However, no methodology is provided for determination of the DOCF in landfills. Therefore, the purpose of this study was to suggest methodologies for the determination of DOC and DOCF in solid waste landfills. A biochemical methane potential (BMP) test could be used to calculate the DOC because the BMP represents an upper limit on the methane potential of a waste, which corresponds to a maximal amount of degraded organic carbon. The calculation was based on the assumption that the DOCF is 100%. In this study, two methodologies were suggested to determine the DOCF in landfills. The first one uses a new equation (DOCF = 2.76W-0.44) with moisture content in the landfill that actual methane flux data are unavailable. Moisture content is a major ecological parameter on the anaerobic biodegradability of the solid waste in the landfill. Another methodology is to use L0,Landfill/L0,BMP ratio. The L0,Landfill could be determined by a regression analysis if methane flux data were available.

Aluminum can is one of the common and economically valuable recycling items in municipal waste streams. In this study, the reduction rate of the greenhouse gas emission and energy savings were estimated when aluminum cans are recycled by using material flow analysis, US EPA WARM method, and EU Prognos method. Based on the results, approximately 16,630 ton of aluminum in 2010 was recovered as ingot, while 10,873 ton of aluminum can to can recycling occurred in the same year. The reduction rate of aluminum recycling was estimated to be 240,986 tCO2eq/yr by US EPA WARM method, while about 305,283 tCO2eq/yr was found by the recycling using EU Prognos method. The difference resulted partly from the different system boundary and the loss rate during aluminum recycling process. The results of the energy savings and greenhouse gas reduction rate would be valuable for waste management policy makers to estimate the potential reduction rate of greenhouse gas by aluminum can recycling and accelerate recycling infrastructure of waste streams. This study also implies that the applications and results of both methods to estimate greenhouse gas reduction rates by aluminum can recycling should be carefully reviewed and acknowledged before the use of the method due to the different assumptions and results that are anticipated.

This study presents detailed emission of greenhouse gases of using Clean Energy Agriculture System according to a cradle-to-gate life-cycle assessment, including emission from energy use and leak of Biogas. Calculations were done with the PASS software and the covered gases are CH4, N2O and CO2, Total GHG fluxes of amount to 1719.03 kgCO2/day, 39.63 kgCO2/day (2.31%) are from facility house process, 0.19 kgCO2/day (0.01%) are from transport process, 696.72 kgCO2/day (40.53%) are from Anaerobic digestion process, 846.61 kgCO2/day (49.25%) are from Heating and cooling system, 135.88 kgCO2/day (7.90%) are from Fertigation production process. The results suggest that for effective reduction of GHG emissions from Facility house using clean energy. Reduction targets should address both the production process as defined by IPCC sectors and the consumption process. An LCA assessment as presented here could be a basis for such efforts.

본 연구는 전북산단내 높은 입주율을 차지하는 중소사업장 대상으로 최적의 온실가스 저감기술을 적용하여, 영세 중소사업장에서 발생되는 온실가스에 대한 관리방안 수립하기 위한 효율성평가 연구이다. 전라북도의 총 온실가스 배출량 중 산업에서의 기여도가 38%를 나타내어 온실가스에 대한 관리가 필요하며, 연도별로 온실가스가 지속적으로 증가하는 경향을 보여주고 있으므로 영세 중소사업장에서 발생되는 온실가스에 대한 관리방안을 위한 효율성평가 수립이 필요하다. 온실가스 효율성평가에서 양호로 조사된 차세대건조기, 정동기술, 열교환기술, 연소기기, 히트펌프 등의 기술을 중소사업장 적용 활성화를 위한 맞춤형으로 선정된 기술은 히트펌프기술, 폐열활용공급 기술을 선정하였다. 이 중 폐열활용공급 기술에 의하여 재생된 에너지를 공급할 수 있는 업체는 온도 70℃ 이상, 유량 500 m³/min 이상의 배출가스를 배출하는 업체를 대상으로 선정하였다. 효율성평가 원칙은 부합성, 수월성, 추진가능성, 구체성, 연계통합성을 고려하여 온실가스 네트워크에 따른 효율성평가 결과, 군산산단은 대규모의 금속제품제조업 또는 식품제품제조업은 소규모의 화학제품제조업과의 폐열 재이용기술을 적용하였을 경우에 양호한 기술로 평가되었으며, 익산산단은 대규모의 화학제품 제조업이 소규모의 전자제품 제조업과의 폐열 재이용기술을 적용하였을 경우에 양호한 기술로 평가되었다.

With a growing concern of greenhouse gas (GHG) emissions due to climate change, many activities and efforts onthe greenhouse gas reduction have been implemented in solid waste sectors. Since recycling is the major managementoption for solid waste in Korea, it is important to estimate the reduction of the greenhouse gas emission during recyclingprocesses. In this study, two common methodologies, Prognos method of EU and waste reduction model (WARM) methodof USA, have been critically reviewed and compared to estimate the reduction for recycling of waste paper in terms ofsystem boundary, recycling processes, and emission factors. As a common point of two methodologies, the reductionfactors for the paper recycling have been developed by subtracting the recycled product emissions from the virgin productemissions to get the greenhouse gas savings. While the recycling losses and transportation are considered in twomethodology development, there are a number of differences between the methodologies in system boundary,transportation distance and forest carbon sequestration. As a result, it caused the difference in final greenhouse gasreduction factor of paper recycling. The reduction factor was −820kgCO2eq/ton in Prognos method, while −3,891kgCO2eq/ton was found in the WARM method. When both methods were applied to recycling of waste paper in Korea,the greenhouse gas reductions by the Prognos method and the WARM method were found to be 3,485.2tCO2eq/day and2,248.8tCO2eq/day, respectively. When the carbon sequestration by forest is considered in the WARM method, thereduction rate was estimated to be 16,538.3tCO2eq/day. The main reasons for such difference can be attributed to systemboundary and forest carbon sequestration. Especially, forest carbon sequestration can be an important factor in Korea thatusually manufactures papers from imported pulp from abroad. This study implies that the applications and results of bothmethods to estimate greenhouse gas reduction by waste recycling should carefully reviewed and acknowledged beforeuse due to the different assumptions and results that are anticipated.

This study analyzed the regional economic feasibility of greenhouse gases (GHGs) reduction technology in paddy rice. Firstly, the impact of GHGs reduction technol-ogy on productivity, emission reduction, and costs is different from region to region. Secondly, the water irrigation system contributes to productivity, GHGs reduction, and water reduction, but the profit of paddy rice will decrease because of increase in fixed costs and variable costs. Thirdly, the economic feasibility shows that water-savings plot has a 1.41 in a benefit-cost ratio.

The relationship between urban spatial structures and GHG-AP integrated emissions was investigated by statistically analyzing those from 25 administrative districts of Seoul. Urban spatial structures, of which data were obtained from Seoul statistics yearbook, were classified into five categories of city development, residence, environment, traffic and economy. They were further classified into 10 components of local area, population, number of households, residential area, forest area, park area, registered vehicles, road area, number of businesses and total local taxes. GHG-AP integrated emissions were estimated based on IPCC(intergovernmental panel on climate change) 2006 guidelines, guideline for government greenhouse inventories, EPA AP-42(compilation of air pollutant emission factors) and preliminary studies. The result of statistical analysis indicated that GHG-AP integrated emissions were significantly correlated with urban spatial structures. The correlation analysis results showed that registered vehicles for GHG (r=0.803, p<0.01), forest area for AP (r=0.996, p<0.01), and park area for AP (r=0.889, p<0.01) were highly significant. From the factor analysis, three groups such as city and traffic categories, economy category and environment category were identified to be the governing factors controlling GHG-AP emissions. The multiple regression analysis also represented that the most influencing factors on GHG-AP emissions were categories of traffic and environment. 25 administrative districts of Seoul were clustered into six groups, of which each has similar characteristics of urban spatial structures and GHG-AP integrated emissions.

산업혁명 이후 연료의 사용이 늘어 CO2 배출량이 급증하여 지구온난화로 인한 다양한 환경변화를 야기해 전 세계가 기후 변화의 위협에 직면해 있다. 국내 온실가스 총 배출량 중 건설 분야 비중은 약 42%로 높은 비중을 차지하고 있으며, 이 중 도로 분야는 약 16%의 비중을 차지하고 있다. 건설재료 및 자재는 제조 시 대부분 화석연료를 사용하므로 CO2 발생량이 매우 많다. 이와 같은 상황을 고려하여 도로 분야에서도 점차적으로 환경 친화적 건설에 대한 중요성이 부각되고 있다. 최근 국내에서는 도로건설로 인하여 발생되는 환경문제를 해소하기 위한 방안으로 친환경 도로건설을 이루기 위하여 다양한 포장 공법이 개발되고 있으나 소음저감, 미끄럼저항 증대 또는 내구성 강화 등의 기능성 측면만을 고려하여 연구가 진행되어졌을 뿐 도로 이용자 측면에서의 친환경성을 확보하고자 오염물질의 저감 및 화석자원의 고갈 등에 대한 근본적인 환경문제의 해결은 미비한 실정이다. 본 연구에서는 친환경 도로포장의 재료로 슬래그 골재를 사용하였고, 슬래그 골재의 입도 및 기초물성 측정, 혼합물 제작을 수행하였다. 슬래그 골재는 다공성 재질로 일반 골재의 흡수율 기준보다 높게 측정되었고, 혼합물 제작 시 조건을 다르게 하여 평가를 진행하였다. 슬래그의 밀도 차이로 동일 중량임에도 두께 얇고 일반 골재와 혼합시 두 재료의 밀도가 다르기 때문에 통과중량백분율 적용이 어려운 것으로 확인되었다. 밀도가 다른 두 재료의 혼합을 위해 체적 단위로 환산한 배합비를 적용하여 배합설계를 수행하였다. 두 종류로 제작된 혼합물의 비교를 통해 슬래그 골재 사용의 극대화 한 재활용 포장 기술의 적용 및 고부가가치화 목적을 두어 연구를 진행하였다.

Taking sample processes from the combined heat and power plant in Busan Fashion Color Industry Complex, the characteristics and amounts of greenhouse gas (GHGs) emissions were analysed and calculated, respectively. Based on the results, environmental assessment was evaluated for recent 3 years. The amounts of GHG emissions from 2011 to 2013 were estimated at 182,750, 184,384 and 190,250 Ton.CO2eq/year, respectively. GHG emissions from stationary combustion sources were found to be more than 99 % of the total emissions. Also, the overall eco-efficiency indicator for environmental assessment was more than 1, suggesting that these results would be beneficial for GHG emissions allowance allocations.

The IPCC methodology for estimating methane emissions from a solid waste landfill is based on the first order decay (FOD) method. One emission factor in the model is the methane generation potential (L0) that is estimated from the amount of decomposable degradable organic carbon (DOC) in a solid waste landfill. L0 is estimated based on the fraction of DOC in the waste, the fraction of the degradable organic carbon that decomposes under anaerobic conditions (DOCf), methane correction factor (MCF), and the fraction of methane in generated landfill gas (F). The other emission factor is the methane generation rate constant (k). The IPCC recommended that every country needs to develop country-specific key parameters (DOC, DOCf, k) more appropriate for its circumstances and characteristics. The objective of this research was to investigate the greenhouse gas emission factor (k) and parameters (DOC, DOCf) for wood wastes in a solid waste landfill. To investigate DOC, DOCf, and k for wood wastes, the biodegradable rate of wood wastes was determined by comparing the composition of excavated samples (L-1, L-2) with their fresh ones (F-1, F-2). The DOC values were found to be 48.36% and 45.27% for F-1 and F-2, respectively. It showed that the IPCC default value of DOC for wood wastes is appropriate for estimating methane emission. The maximum DOCf (0.17 and 0.18) or each wood waste excavated from G landfill was found to be lower compared with those for IPCC. The IPCC provided that default values of DOCf 0.5. The k values were found to be 0.0055 and 0.0058 year−1 for F-1 and F-2, respectively. The result confirmed that the biodegradation rate of wood wastes was very slow due to its lignin.

The whole world concentrates on the reduction of greenhouse gas to effectively cope with policy toward global climate change. To effectively react to climate change, even the agricultural sector requires construction of new farming systems that utilizes new and renewable energy because of rising oil prices and regulations for greenhouse gas emissions. For this reason, we need to fuse the new and renewable energy with the horticulture sector of which the light and heat energy cost accounts for great part, moreover, efforts and researches should me done which can increase income of farmers through reducing carbon dioxide and energy cost in agricultural production expenses. Therefore, this study analyzes economic feasibility and applicability of fusing geothermal heat pump and solar power facilities with high-tech glass greenhouse. As a result, it is concluded that there surely are an applicability and economic feasibility if we apply new development system that can be an alternative for problems of securing premises of existing geothermal heat pump and the RPS system as a power generation company in case of solar power. Therefore, using this analysis data, if new empirical studies fusing and implementing agriculture sector with new and renewable energy fields proliferate and be applied to actual rural and agricultural field, it will increase actual income and will become a new advanced agricultural system that effectively deals with world-wide environmental problems.

Greenhouse gas (GHG) emissions from dye wastewater treatment processes were estimated by analysing their mass and energy balances, which were then used as baseline information for environmental assessment. The total GHG emissions from dye wastewater treatment plants were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The amounts of CO2, CH4 and N2O emissions were calculated according to the Intergovernmental Panel on Clime Change (IPCC) guideline for the GHG target management system. For 3 years between 2011 and 2013, direct and indirect emissions were on average 8,742.7 and 7,892.0 Ton.CO2eq/year, respectively, with the former exhibiting 52.6 %. Also, compared to 2012, in 2013, the eco-efficiency indicator by the GHG emissions was found to be more than 1, suggesting that environmental quality was effectively improved.

18세기 산업화 이후 전 세계적으로 기후변화가 가속화되어 급격한 기후 변화를 초래하였다. 그로 인해 지구의 평균기온과 해수면이 상승하였고, 가뭄과 홍수 등의 잇따른 자연재해가 발생하고 있다. 온실가스는 주로 이산화탄소와 메탄으로 구성되어 있으며, 지구온난화에 주된 영향을 미치는 요소이다. 그 중 주요 온실가스 배출원에 해당하는 폐기물매립지는 인위적 배출원으로서 이에 따른 관리가 필요한 상황이다. 이러한 온실가스를 적정 관리하기 위하여 IPCC (Intergovernmental Panel on Climate Change)가이드라인에서 온실가스 배출량 산정모델을 통해 온실가스 발생량을 산정하도록 하고 있다. 폐기물매립지 표면 발산량에 대하여 일차분해모델(FOD, First Order Decay)을 적용하고 있으며, 이 모델에 적용되는 매개변수 중 하나인 메탄산화계수(OX)는 일차분해 모델에서 온실가스 배출량 산정에 필요한 기초자료로서 IPCC 지침서에 따라 기본값인 0과 잘 관리된 위생매립지에 대하여 1을 적용하고 있다. 메탄산화에 대한 영향인자는 복토층의 두께, 토양의 온도, 질감, 함수율 등이 있으며, 본 연구에서는 그 중 토양의 온도에 따른 메탄산화계수의 차이를 비교하기 위한 연구를 실시하였다. 일교차가 큰 요즘 온도의 차이를 나누기 위하여 실험은 낮과 밤으로 나누었으며, 폐기물매립지에서의 측정방법은 휴대용 레이저메탄검지기(Laser Methane Detector)를 이용하여 폐쇄형 챔버법을 통해 메탄플럭스를 측정하였고, 데이터 신뢰도 향상을 위하여 3-5회 반복 측정을 실시하였다. 이산화탄소는 Air Sampler를 이용하여 포집 후 TCD(Thermal Conductivity Detector)로 분석 실시하였으며, 메탄과 이산화탄소를 측정한 위치의 지하 50cm정도 깊이에서 GA5000(Geotechnical Instruments Co.)을 이용해 메탄, 이산화탄소의 농도를 계측하였다. 표면발산 가스 플럭스와 복토 밑의 매립가스 플럭스의 비를 통하여 메탄산화계수를 산정하였으며, Kriging법을 적용하여 Surfer(Golden software, Inc.) 소프트웨어로 공간 적분값을 구하여, 계측된 영역 전체를 공간평균화 하여 메탄산화계수 값을 계산하였다. 폐기물매립지에서는 메탄산화에 대한 영향인자가 기상조건에 특히 많은 영향을 받기 때문에 이를 적용하여 추가적 연구를 진행하여 보다 더 정확한 메탄산화계수 산정을 통해 더욱 신뢰성 있는 폐기물매립지에서의 온실가스 발생량 예측이 가능할 것으로 판단된다.

Recently, various studies for reducing GHG and energy consumption are increasing in the world. In this study, the previous studies were analyzed to improve reduction methods and propose alternatives in terms of global competitiveness and environmental protection. The result shows systematic research and policy support are necessary to reduce GHG and energy consumption in maintenance field of infrastructure

The university is one of the main energy consumption facilities and thereby releases a large amount of greenhouse gas (GHG). Accordingly, efforts for reducing energy consumption and GHG have been established in many local as well as international universities. However, it has been limited to energy consumption and GHG, and has not included air pollution (AP). Therefore, we estimated GHG and AP integrated emissions from the energy consumed by Seoul National University of Science and Technology during the years between 2010 and 2012. In addition, the effect of alternative energy use scenario was analysed. We estimated GHG using IPCC guideline and Guidelines for Local Government Greenhouse Inventories, and AP using APEMEP/EEA Emission Inventory Guidebook 2013 and Air Pollutants Calculation Manual. The estimated annual average GHG emission was 11,420 tonCO2eq, of which 27% was direct emissions from fuel combustion sectors, including stationary and mobile source, and the remaining 73% was indirect emissions from purchased electricity and purchased water supply. The estimated annual average AP emission was 7,757 kgAP, of which the total amount was from direct emissions only. The annual GHG emissions from city gas and purchased electricity usage per unit area (m2) of the university buildings were estimated as 15.4 kgCO2eq/m2 and 42.4 tonCO2eq/m2 and those per person enrolled in the university were 210 kgCO2eq/capita and 577 kgCO2eq/capita. Alternative energy use scenarios revealed that the use of all alternative energy sources including solar energy, electric car and rain water reuse applicable to the university could reduce as much as 9.4% of the annual GHG and 34% of AP integrated emissions, saving approximately 400 million won per year, corresponding to 14% of the university energy budget.

이 연구는 중학교 1학년 70명 학생들의 온실효과에 대한 정신모형을 알아보고자 하였다. 온 실효과에 대한 중학교 1학년 학생들이 표현한 그림들과 이에 대한 설명의 결과들은 5가지로 분류되었고, 그 결과는 다음과 같다. 모형Ⅰ에서 학생들은 태양광선이나 열이 대기와 온실가스 를 지나서 지구에 튀거나 혹은 반사되어 지구로 되돌아가는 현상으로 온실효과의 메커니즘을 이해하고 있었으나, 대부분의 학생들은 온실기체를 이산화탄소로만 생각하고 있었다. 그리고 모형Ⅱ의 학생들은 태양광선이나 열 혹은 에너지가 대기 중에 붙잡혀 있어 지구의 온도가 올 라간다고 생각하였다. 즉, 태양광선이 지구로 흡수되면 다시 지구 밖으로 나가지 못한다고 이 해하고 있었다. 특히 모형Ⅲ의 학생들은 온실효과를 오존층의 생성과 손실로 연결시켰으며, 모 형Ⅳ와 모형Ⅴ의 학생들은 온실효과의 메커니즘은 모르고, 온실효과를 단지 빙하가 녹거나 공 장 또는 공해로 단순히 표상하였다. 이는 대중매체와 같은 미디어를 통한 학생들의 개인적인 경험을 통하여 각자 나름대로의 해석을 통해 온실효과의 개념을 이해하고 있는 것으로 나타났 다. 그러므로 온실효과에 대한 학생들의 정신모형을 바탕으로 학생들이 과학적인 사고와 능력 을 기를 수 있는 교육과정과 수업을 설계한다면, 과학교육에서 지구온난화와 기후변화에 대한 이해를 제고할 수 있는 토대를 마련할 수 있을 것이다.