남한과 북한은 6.25전쟁 후 간헐적으로 신뢰구축과 군비감축을 협의하고 있지만 상호 정치적 욕망에 의한 형식적 논의에 불가하고 실질적으로는 군사력 증강을 지속하여 추진하고 있다. 군사력 증강에 따른 군비경 쟁은 경제발전의 저해는 물론 정치·사회적 비용도 무시할 수 없다. 이러한 비용은 시간이 지날수록 커지며 남북한의 통일을 염두에 두었을 때 그 통일비용은 감당할 수 없는 부담으로 다가올 것이다. 한반도의 통일 은 분단의 역사를 종식시켜 한민족의 번영을 추구하고 세계 평화에도 기여할 수 있다. 그러나 통일은 남북한의 경제력 차이에 의한 소요비용과 사회적 혼란 등 여러 가지 문제가 야기될 수 있다. 이러한 관점에서 통 일에 소요되는 비용을 산출하여 재원을 마련하고 준비를 한다면 경제적 부담을 줄일 수 있을 것이다. 이와 같은 문제점을 설명하기 위하여 본 논문은 통일비용 조달을 위한 예산절감이 군비감축으로 어느 정도 기여 할 수 있을 것이라는 의도에서 군비감축의 접근방법과 비용을 미시적 차원에서 산출하였다. 군비감축으로 절약된 예산은 통일비용과 비교하여 설명하고, 군비감축을 통하여 절약된 비용을 축적하여 향후 통일비용으로 활용할 수 있는 방안을 제시하였다.

This paper analyzed a survey of 388 general target samples to analyze the correlation between disaster safety costs and human risk factor analysis and evacuation behavior due to tunnel accidents. Considering the impact of the tunnel accident on disaster safety costs and the correlation between human evacuation and risk factors in the tunnel environment, the system should be reorganized to reflect the tunnel’s basic plan, tunnel cross-section, tunnel installation.

PURPOSES : This study reveals the social cost of illegal parking. Roadside illegal parking causes additional traffic congestion, air pollution, and traffic accidents. Several cities try to reduce illegal parking for the same reasons and build public parking spaces. However, few studies have been conducted on the effects and social cost of illegal parking problems. METHODS : In this study, a real-world study site was selected for the calibration of the VISSIM micro-simulator parameters, and several scenarios were created for developing illegal parking effect models. According to the simulation results, this study demonstrated five regression models that illustrated the average travel speed drop effects and the differences in emissions. RESULTS : Depending on the scenarios, the travel speed was dropped by 20 km/h–57 km/h and the levels of carbon dioxide and nitrogen oxide were increased by 111 g–279 g and 22.5 g–56.3 g, respectively. CONCLUSIONS : In this study, a methodology for estimating the social cost of illegal parking was established. Therefore, it is expected to contribute to the evaluation of policies related to illegal parking or the feasibility of facility investment.

PURPOSES : In this study, the social cost of on-street parking spaces was estimated by dividing it into private and external costs. METHODS : We established a methodology and conducted a case analysis of Seoul. Private costs were estimated from the guidelines and historical data collected. The opportunity cost of the land was estimated using spatial information. External costs built a macroscopic model (using TransCAD) and estimated travel time, operation, accident, and environmental costs. RESULTS : The social cost per space was estimated at 77 million won. Private costs were analyzed as 133.3 billion won, the opportunity cost of the land was 68,555 billion won, and external costs were 118,25 billion won in 2020. CONCLUSIONS : In this study, a methodology for estimating the social cost of a road parking facility was established and applied to the case of Seoul. Therefore, it is expected to contribute to the objective reviewing of the feasibility of policy evaluation or facility investment related to parking facilities.

식중독에 의한 사회경제적 손실을 최소화하기 위해서는 식중독과 관련된 경제적 비용 손실을 추정하는 것이 중요하다. 하지만 자료의 부족과 다양한 비용 항목의 존재로 식중독과 관련된 사회경제적 손실비용을 정확하게 추정하기에 어려운 점 있다. 본 연구에서는 국내 식중독 발생에 의한 손실비용을 추정하기에 앞서 국외에서 사용되는 사회경제적 비용항목의 기반 자료 확보를 목적으로 수행되었다. 2009-2019년 국외 식중독과 관련된 사회경제적 손실비용 측정 연구의 사례 조사를 위해 문헌 조사를 실시하였다. 이 연구에서는 사회경제적 손실비용을 크게 의료 기간에 방문한 외래/입원환자 및 의료기관에 미방문한 경험환자로 구분하였다. 또한 이들의 직접비용 및 간접비용을 고려하였고, 더 나아가 기업비용 및 행정비용 항목으로 구분하여 조사하였다. 조사 결과 문헌별, 나라별 상이한 비용항목을 사용하여 손실비용을 추정하는 것으로 관찰되었다. 직접의료비의 경우 모든 연구에서 외래 또는 입원진료비를 선정하여 비용을 산출한 것으로 관찰되었기 때문에 나라별 의료서비스의 체제 및 비용에 따라 항목을 선정해야 한다. 직접비의료비의 경우 몇 몇의 연구에서 외래 방문에 소요된 교통비만을 고려하였기 때문에 간병비 고려 여부에 대해서는 더 논의가 필요할 것으로 사료된다. 간접비용 중 조기사망비용, 작업손실비용, 여가손실비용 및 삶의 질 저하/고통비용은 고려하였으나, 병문안 기회비용은 모든 연구에서 고려하지 않았다. 직접의료비와 마찬가지로 행정비용의 경우에도 국가별 정부 예산이 상이하기 때문에 각 나라에 맞는 항목을 고려해야할 것이다. 따라서 이러한 조사 결과를 바탕으로 국내 식중독 발생에 의한 사회경제적 손실비용 분석을 위해 어떠한 비용 항목을 고려해야 할 것인지에 대한 검증절차가 필요할 것이다. 본 연구는 국내 식중독 발생에 의한 사회경제적 손실비용 분석을 위한 기초적인 정보를 제공할 것이다.

신축성 전극을 다양한 소재와과 방식을 통해 제조되고 있으며 많은 기계적 특성 분석이 연구되고 있다. 은, 구리, 금, 나노와이어 등 다양한 금속이나 CNT, graphene, 플러렌 등을 기반으로 연구되고 있으며 대부분 높은 전도성과 신축특성을 요구하는 어플리케이션에 사용되지만 고가라는 단점이 있다. 본 연구에서는 저비용 소재와 공정으로 높은 신축특성과 반복 특성을 보유한 신축성 전극을 개발하였다. 값싼 전도성 탄소 와 흑연을 혼합하여 페이스트를 개발하였고 개발된 페이스트를 메탈마스크 인쇄 공정을 통해 TPU기판 위에 인쇄하였고 120℃에서 2시간 경화를 진행하였다. 이렇게 개발된 전극을 인장 시험과 인장 반복 시험을 통해 특성을 증명하였고 향후 어플리케이션 적용 가능여부를 확인하기 위해 무릎에 임시로 고정 후 간이 시험을 진행한 결과 20회 반복하는 동안 일정한 저항 변화를 보여줬다.

PURPOSES : The aim of this study is to determine the maintenance costs for a reasonable preliminary feasibility study, feasibility study, or evaluation METHODS : This study was based on government budget execution and budget execution data for expressways, national highways, cable-supported bridges and long-tunnels. For the expressway, data obtained from the Korea Expressway Corporation were used. For the national highway, data was obtained from the Ministry of Land, Infrastructure and Transport. Similarly, data collected from expressway maintenance costs and the Korea Infrastructure Safety and Technology Corporation were used for long tunnels and cable-supported bridges, respectively. The items for highway maintenance cost were reclassified more rationally to facilitate the calculation of the maintenance costs. The replacement cycle for each item was also calculated based on the budget expenditure data. RESULTS : The results of this study showed the standard maintenance cost model for expressways, national highways, cable-supported bridges, and long-tunnels. In other words, a basis for predicting reasonable maintenance costs was prepared for a feasibility study. CONCLUSIONS : The reliability of the maintenance cost results was improved and it was more consistent with actual costs compared to the results of previous studies. It can be used as a basis for estimating the maintenance cost of a preliminary feasibility study and feasibility evaluation in the future.

The purpose of this study is to identify economic situation on scale of tuna distant longline fishery by analyzing its economies of scale using the cost function. To analyze its economics of scale, the deep-sea fishing statistics were used from 2012 to 2016. In detail, the number of panels for estimating the cost function was 68 tuna distant longline vessels from 2012 to 2016, and the total number of observations over the five years were 340. As a final model, the two-way fixed effect model based on the translog cost function was adopted through the F test, the Breusch-Pagan test and the Hausman test. As a result of the analysis, it was found that tuna distant longline fishery between 2012 and 2014 was diseconomies of scale, the fishery between 2015 and 2016 was economies of scale. However, the economic indicators of the scale from 2012 to 2016 were almost close to zero, indicating that the constant returns to scale, the optimal scale, were reached. Therefore, in the situation where the amount of fishery resources in the world continues to decrease, it is necessary to prepare a method to obtain economic benefits through scale maintenance and reduction rather than indiscriminate scale expansion.

The estimation of heat source model is very important for heat transfer analysis with finite element method. Part I of this study used adaptive simulated annealing which is one of the global optimization algorithm for anticipating the parameters of the Goldak model. Although the analysis with 3D model which depicted the real situation produced the correct answer, that took too much time with moving heat source model based on Fortran and Abaqus. This research suggests the procedure which can reduce time with maintaining quality of analysis. The lead time with 2D model is reduced by 90% comparing that of 3D model, the temperature distribution is similar to each other. That is based on the saturation of heat transfer among the direction of heat source movement. Adaptive simulated annealing with 2D model can be used to estimate more proper heat source model and which could enhance to reduce the resources and time for experiments.

In this study, effects of five raw water quality parameters (turbidity, odor compounds caused by algae, filter clogging caused by algae, pH increase caused by algae, and organic matter) on improvements and operations costs of typical water treatment plant (WTP) were estimated. The raw water quality parameters were assumed the worst possible conditions based on the past data and costs were subsequently estimated. Results showed that new water treatment facilities were needed, such as a selective intake system, an advanced water treatment processes, a dual media filter, a carbonation facility, and a re-chlorination facility depending on water quality. Furthermore, changes needed to be made in WTP operations, such as adding powered activated carbon, increasing the injection of chlorine, adding coagulation aid, increasing the discharge of backwashed water, and increasing the operation time of dewatering facilities. Such findings showed that to reliably produce high-quality tap water and reduce water treatment costs, continuous improvements to the quality of water sources are needed.

본 논문에서는 고리 1호기 해체 비용 추정을 위해 외국 원자력발전소 해체 비용 데이터를 현가화한 후 원자력발전소 해체 비용 추정 회귀 분석모델을 개발하였다. 이 모델 개발에 사용된 데이터는 해체 또는 진행 중인 BWR 13기, PWR 16기의 해체 비용 데이터이다. 회귀 분석모델 도출을 위해, 해체 비용을 종속변수로 정하고, 해체 원전의 운전 특성을 반영할 수 있게 고 안된 Contamination factor와 해체 기간을 독립변수로 선정하였다. 빅데이터 분석 도구인 R language의 통계패키지를 이용 하여 회귀 분석모델을 도출하였다. 이 회귀 분석 모델을 적용하여 고리 1호기 해체 비용을 예측한 결과, 미화 663.40~928.32 백만 달러, 한화 약 7,828.12억~1조 954.18억 원이 소요될 것으로 예측되었다.

Forged part made of Cold heading quality wire materials are used for automotive brake systems. The cost reduction of forged products is a major issue because of the strict shape change. A series of studies were conducted to minimize the cost of EPB spindle process among brake parts. In order to reduce the material cost, heat treatment-abbreviated material was applied and the formability on the processes was verified by the ductile fracture theory. In addition, the causes of shape fixation and die life degradation were analyzed using the numerical simulation. The process cost has been minimized by re-designing process, changing the product shape, and the die material.

Using the developed wedding planner selection criteria scale, this study examined whether wedding planner selection criteria differ according to consumer characteristics such as demographic characteristics and wedding preparation behaviors. The main survey for this study was conducted via the Internet with 295 consumers aged 20-30 living in the Seoul metropolitan area. The data collected from the survey processed and analyzed using the statistical programs SPSS 21.0 t-test. Analyzing how wedding planner selection criteria differ according to consumers’ demographic characteristics and wedding preparation behaviors, results shown for the wedding planner selection criteria were all four points on average except for individual characteristics and important sub-factors regardless of the consumers’ characteristics, and various results were derived depending on the consumers’ characteristics. This study has various practical implications in that it verified the difference in wedding planner selection criteria according to consumer characteristics and determined how much money consumers were willing to play for wedding planners. It is recommended that future studies take various approaches to investigate how wedding planner users are satisfied with or place importance on wedding planner services and conduct empirical using the selection criteria developed in this study to compare influential variables that affect behavior intention and willingness to pay according to consumer type.

Systems such as database and socal network systems have been broadly used, and their unexpected failure, with great losses and sometimes a social confusion, has received attention in recent years. Therefore, it is an important issue to find optimal maintenance plans for such kind of systems from the points of system reliability and maintaining cost. However, it is difficult to maintain a system during its working cycle, since stopping works might incur users some troubles. From the above viewpoint, this paper discusses minimal repair maintenance policy with periodic replacement, while considering the random working cycles. The random working cycle and periodic replacement policies with minimal repair has been discussed in traditional literatures by usually analyzing cases for the nonstopping works. However, maintenance can be more conveniently done at discrete time and even during the working cycle in real applications. So, we propose that periodic replacement is planned at discrete times while considering the random working cycle, and moreover provide a model in which system, with a minimal repair at failures between replacements, is replaced at the minimum of discrete times KT and random cycles Y. The average cost rate model is used to determine the optimal number of periodic replacement.

Due to global climate change, Korea is experiencing flooding and drought severely. It is hard to manage water resources because intensive precipitation during short periods and drought are commonly occurred in Korea, recently. Severe drought occurred in 2015 and 2017 in the islands, and coastal and inland areas in Korea, and the citizens experienced decreased water supply and emergency water service by using bottled water. Therefore, the Korean government provided additional governmental funds such as the grant of drought disaster. In this study, we tried to calculate the cost of water for drought response based on the cost of tap water for the regional local governments in Korea and the grant of drought disaster by the Ministry of the Interior and Safety in Korea, etc. The estimated costs of water for drought responses in coastal and inland areas which have a chance to apply alternative water sources such as brackish or seawater desalination and water reuse in Korea were higher than in other areas in Korea. Additionally, as the novel approach of drought response, the 300 m3/day-scale desalination vessel was suggested to provide desalinated water for the islands in Korea. The estimated expenses of water supply for the target island areas (Sinan-gun and Jindo-gun) by the desalination vessel was lower than those by emergency water service by using bottled water.

본 연구의 목적은 악취 발생 저감을 위해 국내에서 최근 권고되는 밀폐(무창)형 돈사와 기존 개방형 돈 사의 비용 편익을 분석하여 이러한 추진 방향의 객관적 타당성을 확보하는 데 있다. 두 돈사 유형의 비용은 설치비와 운용비로 구분한 후 관련 문헌 자료와 현장 조사 결과를 근거로 추정하였고, 편익은 축산 환경 전문가들을 대상으로 한 델파이 설문 조사 기법 적용을 통해 추정하였다. 비용 편익 분석 결과, 양돈 규모에 상관없이 개방형과 밀폐형 돈사 모두 편익/비용 비율이 1 초과로 추정되어 돼지 생산에 따른 경제적 이익이 창출되는 것으로 분석되었다. 하지만 소규모, 중규모, 대규모 양돈 농가 모두 밀폐(무창)형 돈사의 편익/비용 비율(B/C ratio)이 개방형 돈사보다 상대적으로 모두 높은 것으로 추정되었다. 결론적으로 기존 양돈 농가들의 인·허가 시 경제성 우위 측면뿐만 아니라 축산 악취의 효율적 관리를 위해서도 개방형 돈사를 밀폐(무창)형 돈사로 변경하도록 권고해야 하며, 특히 편익/비용 비율이 상대적으로 가장 높은 수치를 보인 대규모 농가인 경우 이를 이행 조치하는 것이 합리적이라 판단된다.

Recently, automobile manufacturing companies, which are major customers of them, are requiring IATF 16949 (ISO/TS 16949) certification as a mandatory requirement to secure product quality. In particular, IATF 16949 : 2016, revised in October 2016, was reinforced product traceability requirements for production information management by lot in the production process. Therefore, small and medium-sized precision parts processing companies in the automobile industry are very difficult to survive due to quality and price competition for customers satisfaction. MES (Manufacturing Execution System) is required to solve this problem. However, small and medium sized precision parts processing enterprises are reluctant to introduce the MES which is not suitable for the manufacturing environment of them such as high cost and low utilization. Even if the system is introduced, it is difficult to operate and maintain the system because the lack of computer manpower. In this paper, we propose a method for building a lot tracking system for small and medium precision parts processing companies by reviewing relevant literature and analyzing cases. In addition, by managing the production history for each lot of the final product in the system, we will grasp the effect of reducing the quality failure cost obtained by minimizing the range of defect selection.