본 논문에서는, 동조액체감쇠기(이하 TLD)만을 실험적 부분구조로 이용하여 TLD가 설치된 건축구조물의 지진 응답 제어효과를 평가하기 위한 실시간 하이브리드 실험법을 제안하고 진동대 실험을 통해 실험적으로 규명한다. 제안된 실험법에서, TLD가 설치된 전체구조물은 상부의 TLD와 하부의 구조물 부분으로 각각 실험적 그리고 수치해석적 부분구조로 나누어진다. 이때 부분구조 사이의 경계면에서 작용하는 하중 또는, TLD에 의한 제어력은 진동대에 설치된 전단형 로드셀에 의해 계측되며 진동대는, 계측된 경계면에서의 제어력이 상부에 작용하고 또한 동시에 기초에 지진하중이 작용하는 수치해석적 부분구조로부터 계산된 응답으로, 상부에 설치된 TLD를 가진하게 된다. 제안된 실험법에 의한 결과와 TLD와 건물모델 모두를 제작하여 실험하는 기존의 방법에 의한 실험 결과들은 서로 잘 일치하며, 이로써 본 논문에서 제안된 실험법을 이용하여 TLD의 제어성능을 손쉽게 평가 할 수 있음을 알 수 있다.

이 연구에서는 전단연결재의 종류를 변수로 더블리브유닛 깊은 데크플레이트 슬래브의 휨 실험을 수행하였으며, 실험결과를 기반으로 비선형유한요소해석을 통하여 춤이 깊은 데크플레이트와 콘크리트 사이의 합성도를 평가하였다. 그 결과, 전단 연결재가 설치되어 있는 경우 휨 강성 및 강도가 크게 향상되는 것으로 나타났다.

Concrete has recently been modified to have various performance and properties. However, the conventional method for predicting the compressive strength of concrete has been suggested by considering only a few influential factors. so, In this study, nine influential factors (W/B ratio, Water, Cement, Aggregate(Coarse, Fine), Fly ash, Blast furnace slag, Curing temperature, and humidity) of papers opened for 10 years were collected at 4 conferences in order to know the various correlations among data and the tendency of data. The selected mixture and compressive strength data were used for learning the Deep Learning Algorithm to derive a prediction model. The purpose of this study is to suggest a method of constructing a prediction model that predicts the compression strength with high accuracy based on Deep Learning Algorithms.

본 연구에서 제안하는 내진보강기법은 듀얼시스템으로 비내진상세로 설계된 저층구조물을 대상으로 적용하기 위한 기법이다. 듀얼시스템은 기존의 구조체, 외부보강체, 강재이력댐퍼로 구성되고 구조체와 외부보강체 사이에 강재이력댐퍼를 설치한다. 구조체와 외부보 강체는 강성과 적재하중에 의해 서로 다른 주기에 의해 상대변위가 발생되고 강재이력댐퍼를 통해 지진에너지를 흡수한다. 본 연구에서 제안 된 듀얼시스템의 내진성능을 검증하기 위해 동적실험을 수행한다. 동적 실험결과, 듀얼시스템 보강 시 에너지가 1.84배 더 많이 입력됨에도 불구하고 56%의 변형 저감과, 93%의 손상 저감이 됨에 따라 듀얼시스템 적용 시 내진성능을 향상시킬 것으로 판단된다. 그리고 연구결과는 듀얼시스템의 설계범위를 설정하기 위한 추후 연구의 기초자료로 제시하고자 한다.

In this paper, a high performance underwater vehicle which can be manufactured at low cost is designed and fabricated, and its performance is verified through experiments. To improve efficiency, the Myring equation is used to design the appearance and the duct structure including the thruster is planned to increase the propulsion efficiency while reducing the drag force. Through various methods, it is secured stable waterproof performance, and also is devised to have high speed movement and turning performance. The developed underwater vehicle is equipped with a high output BLDC motor to achieve a linear speed of up to 2 m/s and can change direction rapidly with stability through four rudders. The rudders are driven by coupling a timing belt and a pulley by extending the axis of a servo motor, and are equipped at the end of the body to turn heading. In addition, for stable posture control, the roll keeps its internal center of gravity low and maintains its stability due to restoring force. By controlling the four rudders, pitch and yaw are handled by the PID controller and show stable performance. To investigate the horizontal turning performance, it is confirmed that the yaw rate controller is designed and stable yaw rate control is performed.

This study was carried out on the upgrading of the noise barrier top device developed by 400km/h high speed railway infra research. By modifying the inner shape of the top device installed on noise barrier top, the performance of the first-stage top device was improved, and the weight was greatly reduced as compared with the first stage top device. In addition, the upper part was completed without an installation fixture by the integral method, and the construction was greatly improved. Finally, the upgraded top device was installed on the HONAM high speed railway site and its performance was verified.

Prediction of the compressive strength of the maturity method has been studied by several researchers and has been applied to the construction of concrete structures. In order to apply the maturity method, which is a function related to temperature and time, it is important to measure the accurate temperature inside the concrete during the curing period. The purpose of this study is to verify the performance by analyzing sensitivity, measurement and transmission accuracy by exposing wireless embedded sensor to various curing environment.

This paper presents the performance verification test and nonlinear analysis of reinforced concrete(RC) strut and concrete filled tube(CFT) strut using super concrete(SC; high strength concrete) for bridges. Reinforce concrete strut as well as CFT strut are poured by 80MPa characteristic strength and CFT strut are used steel pipe with 400 MPa yield strength. Test specimen are manufactured 3 types of strut that 2 types of RC strut and 1 type of CFT strut. Nonlinear finite element analysis was conducted by ABAQUS of commercial FEM software. The results of real scale test specimens are compared with the finite element nonlinear analysis output through load-displacement relation. Through this study, it was investigated that the results of the experiment and those of the analysis are adequately similar.

Interest and requirement of seismic qualification for nonstructural components are increasing in South Korea after observing nonstructural component failures by Kyungju earthquake on 12, October, 2016. However, amplification of input motion by hight of building are not considered in most of seismic qualification or design for nonstructural components in South Korea. In this study, seismic loads are compared which is applied to seismic qualification or design for structural or nonstructural component. As a result, amplification effect by vertical location in a building for nonstructural component should be considered for efficient seismic qualifications. Also, further studies are needed how to apply those amplification effects to required response spectra.

In this research, experiment and simulation plans for evaluating the performance of the cables used for cable-stayed type bridges is presented. 27 cables are prepared where each of the cables are introduced with either corrosion or/and fatigue damage. Then the acquired data is analyzed with the vibration characteristics to evaluate the performance of the cables subjected to the two damage types.

We examined temporal and spatial structure of trends in precipitation-based and temperaturebased extreme indices simulated by the Regional Model Program of Global/Regional Integrated Model System (GRIMs-RMP). The extreme indices were selected to consider the frequency, intensity, and persistence of extreme events. During the Last 30 years from 1979 to 2008, the model reasonably have simulated the temporal and spatial pattern of the trend. Although overestimation of minimum temperature and underestimation of maximum temperature occured, the regional climate model captured observed direction and magnitude well in the indices based on temperature. The indices related to rainfall tended to be overestimated over East Asia except for Korea and Japan. However, the trend showd agreement with observation. the results allow us to be optimistic about the RCM ability in the simulation of important extreme event of precipitation and surface temperature in East Asia. This type of study can also provide meaningful climate statistics and insight into climate change impact study.

Structural engineers needs know-how about using nonlinear analysis softwares for seismic performance evaluation of existing building. In this study, it’s compared with several softwares, nonlinear analysis are available.

과거에는 생애주기에 기반 유지관리 계획에 대한 인식이 부족하였기 때문에 검측자료의 축적은 이루어졌으나 이러한 검측 자료를 이용한 구성품의 수명예측 및 보수보강 시나리오 선정 등 유지관리 의사결정 지원을 위해 사용되지는 못하였다. 이에 본 연구에서는 자료 분석을 위한 궤도 검측 데이터 필터링 및 정제기법을 개발하고, 검측데이터 분석 기법 적용을 통한 궤도의 성능 평가 지표 결정, 다변수 구간특성 및 환경인자를 고려한 레일 마모 및 궤도 틀림에 대한 민감도 분석, 파형과 파장을 고려한 검측데이터 분석 등을 수행하였으며, 이러한 연구 결과를 기반으로 하여 검측된 레일 마모데이터를 이용한 불확실성 기반 궤도성능 예측모델 개봘과 관련한 연구를 수행하였다.

Recently, the use of eco-friendly deicer is recommended for solving problem of chloride deicing salts. The laboratory tests are often used to evaluate deicer performance, but they have been shown to correlate poorly to actual field performance. Thus, we would like to introduce the field test method for improving the performance qualification of anti-icing materials.

The quality of injection sealer for water leakage maintenance be being managed by KS. However, the test result of response to the substrate movement performance have some errors by an experimenter. So, the revision standard of test method is proposed. Therefor, will verify that in this study.

광역보정시스템은 GPS와 같은 위성항법을 이용하는 사용자의 정확성, 무결성을 개선시키기 위하여 고안된 시스템이다. 본 논문에서 는 개발된 의사위성 기반의 광역보정시스템의 전체 구조에 대하여 설명하고, 후처리 기반으로 상용 수신기에 대하여 성능 테스트를 수행하는 실험 방법 및 결과에 대하여 설명한다. 보정정보 생성을 위하여 총 5개의 NDGPS 기준국에서 수집되는 데이터가 활용되었으며 이를 광역기준 국, 중앙처리국 소프트웨어에서 처리하였다. 생성된 보정정보는 SP3, IONEX 데이터와 비교하여 정확도를 테스트하였다. 상용 수신기 실험에서 는 사용자의 RF 신호를 수집, 보정정보를 생성하였으며, 이후에 RF신호와 보정정보가 실린 의사위성 신호를 동시에 방송하여 테스트를 수행하 였다. 테스트는 3대의 상용수신기를 활용하여 수행되었으며 MSAS, GPS 단독 측위 수신기와 비교하여 성능을 검증하였다. 각 수신기의 위치 해 출력 결과로부터 위치오차를 비교하였으며 보정정보를 적용함으로써 향상된 위치해가 출력됨을 확인하였다.

Field test was carried out to verify the performance of high-performance Weigh-In-Motion system which was developed to enhance the precision and durability. As a result, the overall measurement error has been distributed in the range of 5 % for total weight and axle weight of vehicle.