해양 콘크리트 구조물 중 침지대에 위치한 구조물은 수심이 10 m 깊어질수록 1 atm의 정수압을 받아 염화물이온 침투가 촉진될 가능성이 있다. 본 연구에서는 정수압이 해양콘크리트의 염화물이온침투에 미치는 영향과 원인을 평가하기 위하여 보통 포틀랜드 시멘트와 고로슬래그 시멘트를 활용한 콘크리트를 각각 1, 6 atm의 정수압과 인공해수에 노출시켜 깊이별 수용성 염화물량과 미세구조 분석을 실시하였다. 측정결과 6 atm의 정수압을 받는 콘크리트는 표면 염화물이온 농도가 급격하게 상승하며, 깊이별 수용성 염화물량이 증가하는 경향을 나타내었다. 또한, 정수압을 받은 콘크리트는 5~100 nm에 해당하는 모세관공극이 증가하는 경향을 나타내었다.

본 연구에서는 표면 침투 및 코팅형 흡수방지재인 Polydimethylsiloxane(PDMS)을 고인성 섬유복합체(ECC)에 적용하여 적용성, 강도 평가 및 염화물이온 침투 저항성능에 대한 연구를 수행하였다. PDMS 적용 방법에 따른 침투깊이를 분석한 결과 모든 방법에서 KS F4930 의 기준을 만족하는 것을 확인하였다. 적용 방법 중, 침지 방법이 가장 우수한 침투깊이를 보였으나 현장적용성을 고려할 경우 스프레이 방법이 적용 가능한 것으로 확인되었다. ECC 배합에 따른 PDMS 침투깊이 실험 결과 배합강도가 감소할수록 침투깊이는 최대 70% 이상 증가하는 경향을 나타났다. 압축강도 시험 결과에서는 PDMS 침투 깊이가 큰 M4-A, M4-B 시험체의 압축강도는 PDMS를 적용하지 않은 M4 시험체와 비교하여 9.6%, 8.0% 압축강도가 감소하였다. 또한, 침투깊이가 작은 M1-A와 M1-B 시험체의 압축강도는 M1 시험체와 비교하여 4%, 2.2% 감소하여 PDMS 침투깊이가 클수록 강도감소율이 증가하였다. 염소이온침투 저항성능 평가 시험결과, PDMS의 침투깊이가 클수록 염소이온 침투 저항성능이 향상되는 것을 확인하였다.

This study was evaluated the chloride penetration resistance performance of Surface Protection Material(SPM). SPM was applied 0.25 and 0.51 kg/㎡ to the surface of the mortar and immersed aging of the chloride solution 7, 14, and 28 days. As a results, In the case of SPM was applied, chloride did not penetrate until the 28th day.

In this study, the chloride ion diffusion coefficient of ECC coated with silane-based protecting materials were evaluated. The evaluation was carried out according to NT BUILD 492. The test results show that when the protective material is applied to ECC, the chloride diffusion coefficient is reduced by 40-50%.

In this study, the resistance of chloride penetration and sulfate attack of mortar substituted heavyweight waste glass were evaluated. As a result, chloride penetration depth and diffusion coefficient decreased with the substitution of waste glass, chloride penetration resistance is increased. For sulfate attack resistance, the effect of heavyweight waste glass was little.

In this study, sodium chloride is directly mixed with binders in order to simulate harsh environments by promoting the corrosions of fibers and cement-based matrix including UHPC (Ultra High Performance Concrete). The experimental variables are the amount of sodium chloride and material composition such as UHPC, high strength mortar, and normal mortar. The experimental results show that UHPC has the superior capability to resist chloride ions due to its dense microstructures.

In this study, chloride penetration in a repaired concrete using magnesium polymer ceramic (MPC) was assessed based on the NT BUILD 492. To investigate the effect of repaired material on chloride penetration, a cylinder OPC concrete specimen was fabricated and attached on the surface with MPC. Then, chloride penetration test was carried out on the combined concrete sample at a constant applied voltage (30 V) for 6 hours. It was found that most of chloride sources was passed though the interface between OPC and MPC, resulting in a loss of chloride in the material. Thus, it is needed to modify the conventional chloride penetration test for the repaired concrete specimen.

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

시공지연 등으로 발생한 콜드조인트는 전단력에 취약하며 염화물 침투 및 확산을 촉진시킨다. 본 연구는 압축 및 인장하중과 콜드 조인트 조건을 고려한 1년 양생된 콘크리트의 염화물 확산계수를 분석하였으며 선행연구인 91일 재령의 결과와 비교하였다. 91일 재령결과와 비교할 때, 하중을 재하하지 않은 일반적인 경우에는 건전부에서는 10.7%, 콜드조인트에서는 10.5%로 낮게 평가 되었다. 건전부와 콜드조인 트의 감소율의 차이는 비슷하지만 염화물 확산계수는 콜드조인트에서 크게 발생하였다. 압축력 30%의 경우 건전부는 하중재하시 발생된 공 극압밀로 인하여 확산계수가 감소하였다. 콜드조인트 콘크리트의 경우 365일 재령은 91일 재령보다 압축력 30%일 경우 10.9%, 압축력 60%일 경우 5.8% 확산계수가 낮게 평가되었는데, 이는 장기간 수중양생에 따른 지속적인 수화반응에 의해 확산계수가 낮게 평가되었기 때문이다. 인 장력의 경우 압축부와는 다르게 동일 수준의 인장하중과 재령, 콜드조인트 유·무에 따른 확산계수의 차이가 비교적 크지 않았다. 이는 콘크리 트가 1년 재령임에도 불구하고 인장력에 취약한 재료적 특성인 미세균열이 지배적인 영향으로 작용하였기 때문이다.

In this study, Corrosion behavior in mortar was observed by the passage of time by using EIS method. As a result of EIS experiment, equivalent circuit and changes of Impedance parameter could be observed. In addition, it was confirmed that impedance of rebar in concrete and corrosion rate according to the amount of NaCl and LiNO2 were different.

화력발전의 부산물인 플라이 애쉬는 포졸란 반응을 통하여 조직구조를 개선하고 장기 강도 및 염화물 저항성에 매우 효과적이다. 본 연구에서는 28일 및 180일 재령의 보통 포틀랜트 시멘트 및 FA를 혼입한 콘크리트에 대하여 압축강도 및 염화물 저항성을 평가하였으며, 재 령의 증가에 따른 상관성을 평가하였다. 이를 위해, 물-결합재비(W/B)를 37%, 42%, 47%의 3가지 수준, Fly Ash를 시멘트 중량의 0%, 30%, 50%의 3가지 수준으로 나누어 총 9가지 배합을 설정하였으며, 28일 및 180일 재령 시, 압축강도, Tang‘s method에 의한 촉진확산계수, 그리고 ASTM C 1202, KS F 2711을 통한 통과전하량을 측정하였다. Fly Ash 혼입율이 클수록, W/B가 낮을수록 염화물 저항성(확산계수 및 통과전하 량)이 개선되었는데, 모든 FA 50 배합에서 염화물 저항성은 재령 28일 대비 재령 180일에서 약 15% 수준으로 감소하였다. 이는 FA의 포졸란 반응으로 인해 공극구조가 더 치밀해져 나타난 결과이며, 염해 저항성이 강도보다 시간에 더욱 의존적임을 알 수 있다. 재령 180일 이후, FA를 혼입한 배합에서 강도와 염해저항성의 뚜렷한 선형관계가 관측되었다.

There increasing demand for technologies that are capable of producing heat and electric energy by burning fuels such as solid refuse fuel (SRF) and biomass to mitigate the effects of greenhouse gas emissions from fossil fuels and global warming in the field of thermal power generation. In particular, conversion of SRF into energy (Waste to Energy) is the promising technology with high economic and social benefits. The high temperature corrosion of the heat exchange tube is the most important factor that affects the economic deterioration of a circulating fluidized bed boiler using solid refuse fuel, due to operating time decrease and the periodic shutdown during plant operation. The purpose of this study was to examine the high temperature corrosion characteristics of boiler superheater tubes. The change of corrosion characteristics according to the temperature and alkali chloride salt can be investigated by analyzing the morphology of the surface and the microstructure of specimen cross-section and examining the changes in the physical and chemical properties. The degree of corrosion increased as the temperature increased and the weight of the alkali chloride specimen deposit decreased due to the volatilization of the metal chloride compound above 700°C. Deposits of KCl were found to accelerate corrosion by destroying the oxide layer and forming potassium compounds.

This paper presents evaluation of diffusion coefficient, passed charge, and compressive strength considering 3 substitution ratios of fly ash(0%, 30%, and 50%) and 3 different W/B ratios(37%, 42%, and 47%). Also, the relationships among diffusion coefficient, passed charge, and compressive strength are investigated focusing on the results at 28 days and 180 days. With increasing replacement ratio of FA and decreasing W/B, the resistances to chlorides(diffusion coefficient and passed charge) are improved. At 28 days and 180 days, linear relationship are observed between strength and resistance to chloride on the whole.

In the work, HPC (High Performance Concrete) samples are prepared with 3 levels of W/B (water to binder) ratios of 0.37, 0.42, and 0.27 and 3 levels of replacement ratios of 0%, 30% and 50%. Several tests containing chloride diffusion coefficient, passed charge, and compressive strength are performed considering age effect of 28 days and 180 days. Chloride diffusion is more reduced in OPC concrete with lower W/B ratio, and GGBFS concrete with 50% replacement ratio shows significant reduction of chloride diffusion in higher W/B ratio. At the age of 28 days, GGBFS concrete with 50% replacement ratio shows more rapid reduction of chloride diffusion than strength development, which reveals that abundant GGBFS replacement has effective resistance to chloride penetration even in the early-aged condition.

The chloride penetration characteristics of concrete exposed to the marine environment were evaluated by chloride migration coefficient and the surface chloride content, and characteristics of the marine environment such as spray zone and tidal zone are considered

This paper presents evaluation of diffusion coefficient, passed charge, and compressive strength considering 3 substitution ratios of fly ash(0%, 30%, and 50%) and 3 different W/B ratios(37%, 42%, and 47%). Also, the relationships among diffusion coefficient, passed charge, and compressive strength are investigated focusing on the results at 28 days and 180 days. With increasing replacement ratio of FA and decreasing W/B, the resistances to chlorides(diffusion coefficient and passed charge) are improved. At 28 days and 180 days, linear relationship are observed between strength and resistance to chloride on the whole.

In the work, HPC (High Performance Concrete) samples are prepared with 3 levels of W/B (water to binder) ratios of 0.37, 0.42, and 0.27 and 3 levels of replacement ratios of 0%, 30% and 50%. Several tests containing chloride diffusion coefficient, passed charge, and compressive strength are performed considering age effect of 28 days and 180 days. Chloride diffusion is more reduced in OPC concrete with lower W/B ratio, and GGBFS concrete with 50% replacement ratio shows significant reduction of chloride diffusion in higher W/B ratio. At the age of 28 days, GGBFS concrete with 50% replacement ratio shows more rapid reduction of chloride diffusion than strength development, which reveals that abundant GGBFS replacement has effective resistance to chloride penetration even in the early-aged condition.

The chloride penetration characteristics of concrete exposed to the marine environment were evaluated by chloride migration coefficient and the surface chloride content, and characteristics of the marine environment such as spray zone and tidal zone are considered. 요

염해에 콘크리트 구조물의 내구수명 평가는 매우 중요한데, 결정론적 방법 및 확률론적 방법에서 평가된 결과는 큰 차이를 보이고 있다. 본 연구에서는 시간의존형 확산계수와 고정 확산계수를 고려하여 내구수명을 모사하였다. 기본확산계수, 콘크리트 피복두께, 표면염화 물량을 3조건으로 분류하여 각 평가방법에 따라 변화하는 내구적 파괴확률과 내구수명을 평가하였다. 시간의존형 확산계수의 도입을 통하여 두 방법 간의 차이를 감소시킬 수 있었으며, 합리적인 해석결과를 유도할 수 있었다. 염화물 확산계수가 2.5×10-12m2/sec에서 7.5×10-12m2/sec으 로 증가할 때 내구수명은 25.5~35.6%수준으로 감소하였으며, 피복두께가 75 mm에서 125 mm로 증가할 경우, 267~311%로 내구수명은 증가 하였다. 또한 표면염화물량이 5.0 kg/m3에서 15.0 kg/m3으로 변화할 때, 내구수명은 40.9~54.5% 수준으로 감소하였다. 피복두께의 변화에 따른 내구수명의 변화는 기본확산계수 및 표면염화물에 비하여 8~10배정도 크게 평가되었으며 내구수명 확보를 위한 중요한 인자임을 알 수 있다.