In this study, the structural analysis and welding performance experiments were performed to reduce the weight of the semi-automatic TIG welding device. The structural analysis based on finite element method was performed on the lightweight design of the wire feeder's main frame to evaluate the structural safety and straightness of the lightweight frame. To reduce the weight of the welding wire feeder, the step motor was changed to a servo motor and a pinion gear made of lightweight reinforced plastic material was applied. In addition, a new type of welding torch was developed to reduce the weight of the welding torch and to supply more effective fillers. As a result of performing the TIG welding experiment using a prototype of TIG welding device consisting of a lightweight frame, feeding device and welding torch, it was confirmed that the working criteria were satisfied in terms of welding speed, welding bead shape, feeding uniformity and torch durability. The developed lightweight TIG welding device is expected to improve welding productivity and work convenience.

In this study, the uncertainty in the ballistic test was calculated. Characteristic factor plots were used to identify the sources of uncertainty. The results are as follows. First, the uncertainty about the projectile was calculated to be 0.008m/s. Second, the uncertainty for depth measurement was calculated to be 0.03mm. The biggest factor influencing the uncertainty was the human error by the measurer. Therefore, in order to reduce the uncertainty, it is necessary to minimize human intervention by introducing automatic measuring equipment.

This study aims at investigating the fracture characteristic according to the shape of the double cantilever beam specimen for mode II with ultra-high strength steel and Mg alloy steel. As the analysis, all three models had the left-hand holes that were constrained by the cylindrical support and the right-hand holes were enforced by the constraint condition of 6mm/min. This study result showed that the shorter the load block of the double envelope test specimen, the higher the safety. The results of this study are thought to be useful for examining the fracture characteristics of specimen for mode II with ultra high strength steel and Mg alloy steel.

We investigated the current status of institutional review boards (IRBs) that oversee research in dental hospitals. Eight hospitals, all of which had IRB, responded to our e-mail. The questions comprised two topics: IRBs and the clinical trials approved by them. The results showed that the average number of staff on IRBs of the 8 hospitals was 12.5. Furthermore, the proportion of dentists was the highest among the science committee members, with an average of 7.75, and the average number of non-dentists among the non-scientific members was 1.8. Regular IRBs convened meetings more than once a month, over the past year, or only if necessary.According to the approval status of clinical trials from 2016 to 2019, less than 50 studies accounted for 75%. The materials related to dental-implant procedures accounted for the highest quantity of materials used during clinical trials at 33.3%. The duration of 50% of the clinical trials ranged from more than 1 year to less than 2 years.Thus, based on the hypothesis that institutional reviews are currently conducted at dental hospitals and have raised issues and suggested improvements, we believe that IRBs will play an important role in dental hospitals, with more research conducted in dentistry in the future.

PURPOSES : The purpose of this study is to evaluate the structural effects of subbase materials and surface layer thickness obtained from different sites. METHODS : Using a falling weight deflectometer, structural indexes such as SM(r), surface curvature index, base damage index, base curvature index, and AREA, were determined and compared with those of the control section. The back-elastic moduli for each layer were evaluated using the BALM program, and the tensile and compressive strains were analyzed using the KENLAYER program. The damage analysis was conducted to determine both the permanent deformation and fatigue cracking under repeated loading. RESULTS : Increasing the surface layer can improve the elastic moduli of the construction section and compensate for the inclusion of different percent finer within 5% in the subbase layer. CONCLUSIONS : The structural effect of adding 5% of 50 m/m aggregate can be compensated for by increasing the thickness of the surface layer.

This paper aims at investigating the adhesive property at damage analysis according to the shape of the DCB test specimen made of Titanium, Dualumin as the high strength nonferrous metals. In this analysis, all three specimens had the lower holes bound by the cylinder support and the top holes were elongated with the rate of 6mm/min. The study results show that the longer the load block of DCB specimens, the more reliable and durable they are. It is utilized as the basic data at investigating the damage properties of adhesives in DCB specimens made of high strength nonferrous metals.

PURPOSES : This study investigates the abrasion characteristics of coarse aggregate using the Los Angeles (L.A.) abrasion test and the accelerated polishing machine (APM) test. The coarse aggregates are randomly exposed on the surface of asphalt concrete pavements and on exposed aggregate concrete pavements. The exposed aggregates play a very important role in providing skid resistance. Therefore, the adequate abrasion resistance of coarse aggregate must be ensured to maintain the skid resistance during service life. In Korea, the LA abrasion test is conducted according to the KS F 2508 standard for the evaluation of the abrasion resistance of coarse aggregate. However, the road surface abrasion is caused by the friction between the tire and the road surface structure; hence, whether the LA abrasion test, which evaluates the abrasion caused by the impact of coarse aggregates and steel balls, can evaluate the road surface abrasion is questionable. A comparison and an analysis between the APM and LA abrasion tests were conducted herein to evaluate the road abrasion. An analysis was also performed to analyze whether the abrasion characteristics appeared depending on the type of coarse aggregate. METHODS: The results of the APM and LA abrasion tests for various aggregate types were obtained through a series of experiments and literature reviews. The correlation between the LA abrasion loss and the PV data was derived. In addition, the influence of the aggregate type on the abrasion resistance was investigated. RESULTS : An abrasion resistance database was established, and the relationship between the rock types and the abrasion resistance was statistically determined. The results showed that the PV was increased to 0.54 along with a 1% increasing rate of the LA abrasion loss with a 0.67 coefficient of determination. The abrasion resistance was also influenced by the aggregate type, which was found to be statistically significant. CONCLUSIONS: A good relationship between the PV and the LA abrasion loss was obtained, allowing the use of the LA abrasion test (KS F 2508) alone, to reasonably evaluate the abrasion resistance of the exposed aggregate texture. The aggregate types were also found to have an impact on the abrasion resistance.

This study was carried out to standardize the material properties of roll-over protective structure (ROPS) for agricultural tractor. The material properties which were obtained from stress-strain curve, a result of tensile test stress, were used to apply to the virtual test and varied from one production lot to the other and from one manufacturer to the other. And the finite element analysis was performed on the ROPS according to the OECD code. The results show that the load-displacement curves of virtual test were approximately equal to the actual test curves. The manufacturer or lot has been shown to have little effect on the properties of the material. Therefore, it is expected that the representative values that can be used in the finite element analysis can be determined by averaging the property values.

본 논문에서는 가스건 시험에서 원충격자의 충격 감가속도 예측에 관한 전산해석적 연구를 수행하였다. 무기체계 개발에 있어서, 가스건 시험을 통한 수만 G 이상에서의 내고충격성능에 대한 검증은 필요하다. 시험품이 받는 충격 감가속도는 버드조립체의 형상, 무게, 비행 속도 등 여러 변수에 의존하기 때문에 충격 감가속도를 생성시키는 적합한 시험조건을 찾는 것은 매우 중요하다. 하지만, 시험을 통해 기본적인 데이터를 구축하는 것은 경제적인 측면에서 비효율적이기 때문에 전산해석적 기법을 확보하여야 한다. 이에 본 연구에서는 130mm 가스건 시험을 바탕으로 획득한 데이터를 기반으로 하여 Explicit 코드를 사용하는 ANSYS AUTODYN을 활용하여 전산해석을 수행하였다. 전산해석을 통해, 시간에 따른 시험품의 동적거 동현상 뿐만 아니라 전산해석결과를 시험결과와의 비교 및 분석을 함으로써 검증을 수행하였다.

AU(A plus U-shaped) composite beam was developed for reducing the story height in the residential buildings, and saving the cosrtuction cost of floor structures. Structural performance and economic feasibility of the composite beam have been sufficiently approved through the structural experiments and the analytical studies. Fire safety for the practical application of the composite beam has also been verified through the fire resistance tests and the heat transfer analyses. In this study 2-points bending tests were performed on the four specimens already tested for fire resistance to evaluate the residual bending strength of AU composite beam after fire accident. The same bending test was performed on the one fresh specimen having the same section and span of the specimens for practically comparative study.

Given the view of tests as mechanisms within a language policy framework (Shohamy, 2006), Korean proficiency tests are not only used as a way to measure language knowledge, but rather as tools to impose national ideologies about langage use and diversity. The field of Korean language testing needs to embrace sociopolitical dimensions, and engage what is going on value and consequence in test development and validation. By drawing upon a combined approach of Messick’s (1989) validity framework, Fairclough’s (2001) Critical Discourse Analysis (CDA), Bachman and Palmer’s Assessment Use Arugment (AUA), this study aims to illustrate how the practice of testing can be discursively interpreted as a multilayered phenomenon, constituted through discourse. It discussed the applicability of AUA’s two claims (decisions, consequences) to the validation of Korean language proficiency or related certification testing for immigrants with foci of value implications and consequences. The interconnectedness of test validation and CDA is modelled through the procedure of Faircough’s (2001) analytic methodology. In an effort to illustrate that language testing is discursively value-laded, this study not only offer a theoretical and methodological addition to the current inquiry of test validation, but also re-emphasize that language testing is sociopolitically driven from a discursive angle.