본 연구에서는 해양플랜트 산업의 가치사슬 및 수명주기 연구를 통해 해양 자원개발 비즈니스의 포괄적인 형상을 파악하였고 해양프로젝트 검증 목적의 시뮬레이션을 위해 조립 및 인간공학 시뮬레이션에 대한 연구를 수행하였다. 구체적으로는 조립 시뮬레이션의 경우 드릴쉽을 대상으로 탑재공정에 대한 조립 시뮬레이션을 통해 공정에 대한 유효성 검증을 수행할 수 있었고, 인간공학 시뮬레이션의 경우 FPSO 플랫폼을 대상으로 작업자 시뮬레이션을 통해 작업환경에서의 문제점을 사전에 도출할 수 있었다.

So far, square concrete filled tubular(CFT) columns have been used in a limited width thickness ratio. The reason is that local buckling occurs in steel tube easily. Once the local buckling occurs, the confinement effect of steel tube on concrete disappears. In this study, we developed welded built-up square steel tube with reinforcement which are placed at the center of the tube width acts as an anchor. 3 specimens of slender welded built-up square CFT columns and 3 specimens of slender welded built-up square steel tube columns were manufactured with parameters of width(B) of steel tube, width thickness ratio(B/t). we conducted a experimental test on the 6 specimens under eccentric load, and evaluated the structural resistance and behavior of 6 specimens.

CFST columns are structurally superior because the concrete inside the steel tubes prevents local buckling at the tubes and the tubes confine the concrete. And, the thickness of steel tube in CFST column has been thinner with development of high-strengh steel. The thinner the steel tube of a square CFST column is, the more local buckling is likely to occur. For this reason, we developed welded built-up square steel tube with stiffeners which are placed at the center of the tube width acts as an anchor. In this study, we conduct experimental test for three specimens of the 4m long span welded built-up square CFT column with parameters of L/D and D/t. And, the test results were compared with the analysis results by M-ϕ-P Program.

According to a simple survey on the current status of the assembly line design, it was found that trial and error methods on the basis of experiences have been used mainly in domestic manufacturing industries, even though there exist a lot of excellent line balancing studies. It seems that more practical researches should be carried out to develop user-oriented line balancing tools especially for small and medium-sized enterprises. This study presents a design of the line balancing tool which can support the line balancing tasks of nonspecialists. The proposed design tool is composed of three major modules: pre-process, line balancing, and post-process. In particular, pre-process and post-process are newly proposed to increase its ease of use. We applied the proposed design to a test problem and test result showed that our practical method may contribute to enhance the efficiency of production operations management.

For zero inventory and mixed assembly production, JIT (Just In Time) production system in Toyota and JIS (Just-In-Sequence) production system in Hyundai motor co. have been proposed in automobile production areas. Even though the production systems are popular in the areas, many subcontract companies producing part-modules for final production at a parent company suffers from excessive or shortage amount of inventory due to the time gap of production and delivery to the parent company. In this study, we propose an efficient real-time assembly sequence system applying a well-known Pareto method using Paint-In information in painting process and daily production planning information. Based on this system, a production line can estimate the shortage amount of UPH (Units Per Hour) at production line and recovers the amount before operating assembly production in the line. The proposed system provides efficiency on productivity compared with the previous system.

In this study, we investigated localized surface plasmon resonance and the related coupling phenomena with respect to various geometric parameters of Ag nanoparticles, including the size and inter-particle distance. The plasmon resonances of Ag nanoparticles were studied using three-dimensional finite difference time domain(FDTD) calculations. From the FDTD calculations, we discovered the existence of a symmetric and an anti-symmetric plasmon coupling modes in the coupled Ag nanoparticles. The dependence of the resonance wavelength with respect to the inter-particle distance was also investigated, revealing that the anti-symmetric mode is more closely correlated with the inter-particle distance of the Ag nanoparticles than the symmetric mode. We also found that higher order resonance modes are appeared in the extinction spectrum for closely spaced Ag nanoparticles. Plasmon resonance calculations for the Ag particles coated with a SiO2 layer showed enhanced plasmon coupling due to the strengthened plasmon resonance, suggesting that the inter-particle distance of the Ag nanoparticles can be estimated by measuring the transmission and absorption spectra with the plasmon resonance of symmetric and anti-symmetric localized surface plasmons.

For zero inventory and mixed assembly production, JIT (Just In Time) production system in Toyota and JIS (Just-In-Sequence) production system in Hyundai motor co. have been proposed. Even though the production systems are popular in automobile production area, many subcontract companies producing part-modules for final production at a parent company suffers from excessive or shortage amount of inventory due to the time gap of production and delivery to the parent company. In this study, we propose an efficient real-time assembly sequence system applying a well-known Pareto method using Paint-In information in painting process and daily production planning information. Based on this system, a production line can estimate the shortage amount of UPH (Units Per Hour) at production line and recovers the amount before operating assembly production in the line. The proposed system provides efficiency on productivity compared with the previous system.

Recently, the using of prefabricated temporary equipments is increasing in the industrial field because it can reduce the installation and dismantling period. The various types of prefabricated temporary equipments are manufacturing with various materials in domestic and overseas countries. However, those equipments should win the safety certificate according to the "Governmental Notification about Safety Certification" which regulate the member-based safety certification. It tends to cause over performance of temporary equipments because it couldn't consider structural benefit of the prefabricated products. As the result of this study, it is concluded that the establishment of new safety certification standard for the prefabricated temporary equipments is resonable and the movable scaffold is appropriate for those prefabricated temporary equipment. The movable scaffolds are using as single structure and cannot be expands horizontally. Other types of temporary equipments are using as complex structure which can freely expand horizontally according to the main structure. From the results of the study, the standard of vertical compression performance of prefabricated movable scaffolds should be more than double the performance of single main frame. Other test items of safety certification standard should be fixed when the Notification is amended. The prefabricated temporary equipments which are adopted for the safety standard on assembled structure should be used, moved and kept in assembled state and not separated discretionally. The establishment of new standard for the assembled structure based on this study leads to the development of various types of temporary equipments using structural efficiency of prefabricated structure.

본 연구에서는 기존의 블록 조립 후 정도 계산 절차와 블록 조립의 특성을 고려한 최적 정도 계산 알고리즘 개발을 위한 연구를 수행하였다. 여기서 제안된 알고리즘은 생산관리점들 중 특정한 관리점을 기준으로 생산관리점들의 설계와 측정 데이터 사이의 평균제곱근 오차의 합을 목적함수로 가진다. 생산관리점들은 접합면 상의 데이터와 그 외의 데이터로 구분하였으며, 구분된 데이터는 정합 과정에서 사용되어지는 6가지 자유도 조합 결정에 있어 다양한 제약조건 구성과 목적함수 계산에 사용하였다. 목적함수 및 제약조건과 함께 탑재공정을 고려하여 설계와 측정 계산 대상점 들 간의 오차가 허용 오차 이내에 포함되는지를 확인하는 과정이 포함되는 점과 점 관계를 이용하는 변형 ICP 알고리즘과 sampling법을 혼합하여 최소 오차 범위를 계산하는 최적 정도 계산 알고리즘을 개발하였다. 실제 공정에서 확인된 블록 측정 데이터를 개발된 알고리즘에 적용한 결과에 따르면 최적 정도 계산의 대상점은 접합면 상의 점들만으로 계산을 수행하는 것보다 전체 점을 대상으로 계산하는 것이 더 작은 오차를 가지며 접합면의 한 점을 고정된 일치점으로 두고 모든 생산관리점들을 대상점으로 계산 하는 것이 최소 오차를 가지는 최적 정도 계산방법이라는 결론을 도출하였다.

Controlling the stick and slip motions of the contact lines in a confined geometry comprised of a spherical lens with a flat substrate is useful for manufacturing polymer ring patterns. We used a sphere on a flat geometry, by which we could control the interfaces of the solution, vapor and substrate. By this method, hundreds of concentric ring-pattern formations of a linear conjugated polymer, poly [2-methoxy-5-(2-thylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), were generated with excellent regularity over large areas after complete solvent evaporation. Subsequently, the MEH-PPV ring patterns played a role as a directed template to organize highly regular concentric rings of single-walled carbon nanotubes(SWCNTs); when a droplet of the SWCNT suspension in water was casted onto the prepared substrate, hydrophobic polymer patterns confined the water dispersed SWCNTs in between the hydrophilicized SiO2/Si substrate. As the solvent evaporated, SWCNT-rings were formed in between MEH-PPV rings with controlled density. Finally, we used a lift-off process to produce SWCNT patterns by the removal of a sacrificial polymer template with organic solvent. We also fabricated a field effect transistor using self-assembled SWCNT networks on a SiO2/Si substrate.

In this study, an externally reinforced structural system for SMC(Sheet Molding Compound) panel water tank, designed according to the Japanese design code, is experimented to evaluate its seismic performance. The test tank is 3m long, 2m wide and 3m high, considering the capacity and size of the shaking table. The measured hydrodynamic pressures are found to be approximately 70% of the Japanese design code values. It may be partially due to the convex shape effect of the unit panels. The analytical results of externally reinforced system based on the measured dynamic water pressures are found in good agreement with the test results. If the design hydrodynamic pressures are estimated properly, the proposed analytical model for the externally reinforced water tank becomes a useful design tool and the Japanese design code is found to provide a safe design for the external frames of SMC panel water tank.

Recently, the optimisation of end-of-life (EOL) product remanufacturing processes has been highlighted. In particular, computer remanufacturing becomes important as the amount of disposed of computers is rapidly increasing. At the computer remanufacturing, depending on the selections of used computer parts, the value of remanufactured computers will be different. Hence, it is important to select appropriate computer parts at the reassembly. To this end, this study deals with a decision making problem to select the best combination of computer parts for minimising the total remanufacturing computer cost. This problem is formulated with an integer nonlinear programming model and heuristic search algorithms are proposed to resolve it.

CONWIP is robust and efficient for various type of operating system, such as series, parallel, and assembly systems. Especially, assembly system would be controlled couple of modified CONWIP system. In the following paper, we developed Critical Path CONWIP system that gives signal to sub-line from a station of critical path then, compared with m-conwip, discrete-card-buffer CONWIP. 2 representative asymmetric assembly system models are used to compare each control system. As a result, critical path CONWIP holds less whole work-in-process with similar output. It can decrease total cost and WIP for high holding cost assembly system

모듈러 강교량 제작, 조립, 설계, 시공단계에서 상부모듈의 부품정보를 효율적으로 제공하고 교환하기 위하여 BIM (Building Information Modeling) 프로젝트에서 정보교환을 위하여 사용하는 국제표준인 IFC 모델을 활용한 부품정보 라이 브러리 구축방법을 제시하였다. 모듈러 강교량의 상부모듈을 구성하는 부품정보를 IFC 모델로 표현하기 위하여 의미론적 인 관점에서 기존 IFC 모델에서 부품정보를 표현할 수 있는 엔티티와 모듈러 강교량의 구성요소를 매칭하여 적용하였으 며, 구성요소의 역할을 구분하기 위하여 매칭한 엔티티의 타입을 적용하거나 사용자정의 타입으로 정의하였다. 또한, 부품 정보 라이브러리에서 부품 및 조립품의 정보를 해당단계에서 효율적으로 제공하기 위하여 조립체계를 네 단계의 상세수준 (LoD)으로 구분하여 정의하였으며, 이를 IFC 모델로 표현하기 위하여 새로운 속성정보를 정의하였다. 마지막으로, IFC 모 델과 매칭하여 정의한 정보를 실제 모듈러 강교량 상부모듈에 적용하여 IFC 기반의 시범 라이브러리 정보를 생성하였다.

A typical job sequencing problem is studied in this research to improve productivities in manufacturing companies. The problem consists of two-stage parts and assembly processes. Two parts are provided independently each other and then two sequential asse

This research is to sequence flow shop with two parallel parts production and two assembly machines in sequence. Two different objective functions are studied. One is to minimize total completion time and the other is to minimize the difference of 1 job completion time and total completion time. A heuristic is designed to solve the sequencing problem. Initial solution is developed in the first stage and then the initial solution is improved in the second stage. Experimental 5 job problems are used to evaluate the performance of the suggested heuristic. The optimum solutions obtained by enumeration are used to comparisons. Also 20 job problems are generated for evaluations. 100 randomly generated sequences are evaluated and proved that the distributions are normal. And then presented how good the solutions obtained by suggested method. The initial solution stage is different for the minimization of completion time differences.