This study investigated the flexural performance of high performance fiber reinforced cementitious composite (HPFRCC), which used high strength steel fibers with volume fraction 8%. Under the third-point loading using a closed-loop, servo-controlled testing system (ASTM 1609), load-deflection curves were obtained. The major test variables include silica fume replacement ratio 15% and exposure termperature, ambient and 400°C. The flexural strength was similar to the compressive strength and the absorbed fracture energy was relatively greater than other typical HPFRCC materials. This may be a composite reaction of the strong bonding between steel fiber and matrix and high compressive strength of the matrix itself. Once the specimens were exposed to high temperature 400°C the flexural strength decreased.

Autogenous shrinkage isn't currently defined in Korean Highway Bridge Specifications. Accordingly, the structural analysis was carried out to reflect the contents on the autogenous shrinkage of the Eurocode(fib Bulletin 55 : Model code 2010). As a result, we examined the possible initial crack caused by the autogenous shrinkage.

최근 초고성능 콘크리트가 RPC의 개념을 상용화하면서 개발되어 사용되고 있다. RPC에 강섬유를 혼입하여 100 MPa 이상의 높은 압축강도를 발현하게 됨에 따라, 급작스러운 취성파괴를 방지할 수 있었으며 높은 수준의 인장강도를 보유할 수 있게 되었다. 그러나, 높은 강도 수준은 현행 설계기준의 적용 시 신뢰성의 확보가 어렵게 됨에 따라 재료의 성능에 기반한 상세설계가 필요하게 된다. 따라서 설계에 적용할 초고성능 콘크리트의 응력-변형률 관계를 정의하기 위한 지표의 추정이 중요하게 된다. 따라서 본 연구에서는 80MPa~200MPa 수준의 압축강도를 보유한 초고성능 콘크리트의 재료 시험을 수행하여 초고성능 콘크리트의 기계적 성능을 검토하였다. 시험 결과 초고성능 콘크리트 또한 보통강도 또는 고강도 콘크리트 영역에서 나타나는 압축강도와 기계적특성 사이의 관계가 불안전측의 추정을 하게 되는 것을 확인할 수 있었다. 이에 기존 연구로부터 수집된, 쪼갬인장강도 원주형 공시체 시험 결과와 프리즘 공시체의 시험결과를 활용하여 기존의 추정식들을 평가하였다. 통계적 평가 결과 시험결과에서 나타난 바와 같이 콘크리트의 압축강도 상승과 함께 낮은 수준의 정확도가 나타나는 것을 확인할 수 있었다. 이에 본 연구에서는 수행된 시험 결과와 수집된 시험 결과들을 사용하여 넓은 압축강도 범위에서 사용 가능한 기계적 성질의 추정식을 도출하였다.

The purpose of this study is to evaluate the effect of improvement on the impact resistance and strength properties of cement composites by surface modification of aramid fiber. For aramid fiber reinforced cement composites, therefore, dispersion capability and the bonding efficiency between the fibers and the cement composite material need to be improved. It is possible by modifying surface properties to hydrophobic, it is considered that oiling agent ratio of 1.2 % and improvement of performance is in need to be investigated. In this study, short aramid fibers were mixed by different fiber length and oiling agent ratio. And improvement of strength properties and impact resistance performance of hybrid cement composites were evaluated under the influence of steel fiber. As a result, strength properties of aramid fiber reinforced cement composites are different by mixing ratio of fiber, oiling agent ratio and length of fiber. In case of cement composites which have same volume fraction and fiber length, tensile strength and flexural strength were improved with increase of the emulsions throughput of the fiber surface. The results of evaluation on the static strength properties had effects on impact resistance performance by high-velocity impact. And it was observed that the scabbing of rear was suppressed with increase of the oiling agent ratio.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study produced an extrusion panel by using cement as the base materials and substitutingbinding materials up to 40% to analyze strength characteristics. According to the results of strength characteristics bythe replacement binder (Low energy curing Admixture) showed an apparent active strength improvement. In particular,specimens substituting binder as 45% indicated the greatest strength improvement. When binding materials was used withsubstitution, it showed strength characteristics similar or higher than specimens made from tertiary autoclave curing assecondary steam curing.

This study evaluated compressive strength on the slurry for HPFRCC using blast- furnace slag with various blain as a basic study for developing alternative technology of the existing HPFRCC.

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Sample Plain with density showed lowest. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the 4:6 was highest.

본 연구에서는 우선 화재에 노출된 고강도 콘크리트의 내화특성과 폭렬 메커니즘을 규명한 기존 국내외 연구자들의 연구문헌들을 심도 깊게 고찰하였다. 그 후 고온을 받은 고강도 콘크리트에 대한 국내외 연구자들의 주요 실험 변수를 분석하여 가장 최적의 변수를 설정하였으며 이를 토대로 하여 100MPa급 고강도 콘크리트의 내화 특성을 규명하기 위한 내화실험을 계획하였다. 또한 기존 연구의 실험결과를분석한 결과 폭렬방지에 효과가 있는 것으로 알려져 있는 PP섬유와 친수성 재료로서 시멘트 입자와 부착성능이 우수하고 워커빌리티를 개선할 수 있는 NY섬유를 혼합한 신재료 HB섬유를 섬유혼입률 0.05%로 정해 배합설계에 반영하였다. 이러한 배합설계로 타설한 총 48개의 공시체를 28일 양생기간 후 온도변화 (100℃~700℃)에 따른 고강도 콘크리트의 역학적 특성을 분석하기 위해 화재를 받은 후 냉간상태에서의 내화실험을 수행하였으며 이를 통해 고강도 콘크리트의 내화 특성을 분석하였다.

In this study, an experiment was conducted to evaluate the changes in the strength properties of cement paste by increasing the amount of added CNT. The results maybe useful to determine the proper amount of CNT considering the strength and fluidity of CNT-reinforced cement paste.

산업부산물인 폐유황의 재활용을 목적으로 개질 처리된 유황을 대상으로 콘크리트용 혼화재료로서의 개질 처리된 유황 액체와 분말을 콘크리트에 0%, 5%, 10%, 15% 외할 첨가하여 개질유황 액체와 분말의 첨가별 물리적 특성 및 내구성능을 평가한 결과를 고찰하였다.

This paper reported the effect of blended activator on the compressive strength of alkali-activated slag cement(AASC) mortar. The alkalis combinations made using sodium hydroxide(NaOH), calcium hydroxide(Ca(OH)2) and potassium hydroxide(KOH) with calcium carbonate(CaCO3). The compressive strength was increase as the dosage of caustic alkali increase.

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with natural gypsum by (0, 5, 15, 20, 25, 35, 45) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali activator. Sample NG-0.15 with density showed lowest. After this point, density increases as replacement ratio increases. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the NG-0.45 was highest.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67 million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study manufactured mortar by having cement as the base and substituting three bindingmaterials up to 50% and then adopted different curing methods to analyze congelation and strength characteristics. According to the result of strength characteristics by the types of binding materials and replacement ratio, the specimensubstituting ESA (Early Strength Admixture) and FPC (Fine Particle Cement) showed active strength improvement. Inparticular, the specimen substituting ESA as 25% indicated the greatest strength improvement, and as the number of curingincreased, the strength grew higher, too. And when the binding material was used by substitution, it showed strengthcharacteristics similar to or higher than the specimen conducting tertiary autoclave curing as the secondary steam curing.

In this study, manufactured of cement mortar using high early strength cement(10 ~ 50 wt%) and blast furnace slag powder(50 ~ 90 wt%), according to compressive strength and flexural strength of hardened cement mortar. XRD and SEM were evaluated utilizing the initial cement hydration properties.

Based on the study of compressive strength due to SPC(sulfur polymer cement) content variation in the sulfur polymer concrete , it was found that the SPC content was required more than 16% to get over 50 MPa compressive strength and increasing ratio of the strength was greatest at SPC 14%.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing Silica Fume Binder with elapsed curing time.

The effects of maximum aggregate size on mechanical properties of high-strength steel fiber reinforced concrete (SFRC) were investigated in this work. Test main variable is maximum aggregate size (8 and 20mm). The cylinder specimens was casted for compressive test and the prism specimens was tested under four points loading. Test results indicated that the addition of steel fiber improves compressive and flexural behavior of high-strength concrete. Also smaller aggregate size improve mechanical properties of high fiber volume fraction SFRC.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing 30% blast furnace slag with curing days.

The objective of this study is to investigated the compressive characteristics properties used cement paste containing 20% fly ash with curing days.

본 연구에서는 각종 산업부산물 및 도시형 리싸이클링 재료 등의 재생자원을 안전하게 유효 이용할 수 있는 방안으로 BFS 및 SS를 활용한 저강도 콘크리트의 기초적 물성을 파악하기 위하여 플로우 및 블리딩, 일축압축강도, 환경오염평가를 중심으로 실험을 실시하였다. BFS 및 SS를 활용한 저강도 콘크리트의 경우 최소단위수량의 확보를 통한 유동성 개선 및 블리딩율 억제 또한, 현장 적용성을 고려한 일축압축강도의 확보에 있어 사용 잔골재의 차이에 상관없이 BFS 6000 이상을 30% 범위에서 혼입하는 것이 가장 유효한 것으로 나타났다. 특히, SS의 유효 활용 측면에서 BFS 8000을 30% 범위에서 혼합하여 사용하면 유동성 개선 및 블리딩율 억제, 일축압축강도의 확보는 물론 현장 적용에 있어 가장 최적의 배합조건으로 나타났다. 한편, SS를 활용한 시멘트 개량토를 대상으로 유해물질 함유량 및 용출시험을 실시한 결과 모두 환경 기준치 이하를 만족하는 것으로 나타나 주변 환경에 미치는 영향은 없는 것으로 확인되었다.