This study aims to investigate the seismic response of a large span thin shell structures and assess their displacement under seismic loads. The study employs finite element analysis to model a thin shell structure subjected to seismic excitation. The analysis includes eigenvalue analysis and time history analysis to evaluate the natural frequencies and displacement response of the structure under seismic loads. The findings show that the seismic response of the large span thin shell structure is highly dependent on the frequency content of the seismic excitation. The eigenvalue analysis reveals that the tenth mode of vibration of the structure corresponds to a large-span mode. The time history analysis further demonstrates, with 5% damping, that the displacement response of the structure at the critical node number 4920 increases with increasing seismic intensity, reaching a maximum displacement of 49.87mm at 3.615 seconds. Nevertheless, the maximum displacement is well below the allowable limit of the thin shell. The results of this study provide insight into the behaviour of complex large span thin shell structures as elevated foundations for buildings under seismic excitation, based on the displacement contours on different modes of eigenvalues. The findings suggest that the displacement response of the structure is significant for this new application of thin shell, and it is recommended to enhance the critical displacement area in the next design phase to align with the findings of this study to resist the seismic impact.

BNKT Ceramics, one of the representative Pb free based piezoelectric ceramics, constitutes a perovskite(ABO3) structure. At this time, the perovskite structure (ABO3) is in the form where the corners of the octahedrons are connected, and in the unit cell, two ions, A and B, are cations, A ion is located at the body center, B ion is located at each corner, and an anion O is located at the center of each side. Since Bi, Na, and K sources constituting the A site are highly volatile at a sintering temperature of 1100℃ or higher, it is difficult to maintain uniformity of the composition. In order to solve this problem, there should be suppression of volatilization of the A site material or additional compensation of the volatilized. In this study, the basic composition of BNKT Ceramics was set to Bi0.5(Na0.78K0.22)0.5TiO3 (= BNKT), and volatile site (Bi, Na, and K sources) were coated in the form of a shell to compensate additionally for the A site ions. In addition, the physical and electrical properties of BNKT and its coated with shell additives(= @BNK) were compared and analyzed, respectively. As a result of analyzing the crystal structure through XRD, both BNKT(Core) and @BNK(Shell) had perovskite phases, and the crystallinity was almost similar. Although the Curie temperature of the two sintered bodies was almost the same (TC = 290 ~ 300 ℃), it was confirmed that the d33 (piezoelectric coefficient) and Pr (residual polarization) values were different. The experimental results indicated that the additional compensation for a shell additive causes the coarsening, resulting in a decrease in sintering density and Pr(remanent polarization). However, coating shell additives to compensate for A site ion is an effective way to suppress volatilization. Based on these experimental results, it would be the biggest advantage to develop an eco-friendly material (Lead-free) that replaced lead (Pb), which is harmful to the human body. This lead-free piezoelectric material can be applied to a biomedical device or products(ex. earphones (hearing aids), heart rate monitors, ultrasonic vibrators, etc.) and skin beauty improvement products (mask packs for whitening and wrinkle improvement).

The capacity of high nickel Li(NixCoyMn1-x-y)O2 (NCM, x ≥ 0.8) cathodes is known to rapidly decline, a serious problem that needs to be solved in a timely manner. It was reported that cathode materials with the {010} plane exposed toward the outside, i.e., a radial structure, can provide facile Li+ diffusion paths and stress buffer during repeated cycles. In addition, cathodes with a core-shell composition gradient are of great interest. For example, a stable surface structure can be achieved using relatively low nickel content on the surface. In this study, precursors of the high-nickel NCM were synthesized by coprecipitation in ambient atmosphere. Then, a transition metal solution for coprecipitation was replaced with a low nickel content and the coprecipitation reaction proceeded for the desired time. The electrochemical analysis of the core-shell cathode showed a capacity retention of 94 % after 100 cycles, compared to the initial discharge capacity of 184.74 mA h/g. The rate capability test also confirmed that the core-shell cathode had enhanced kinetics during charging and discharging at 1 A/g.

Core-shell structured nanoparticles are garnering attention because these nanoparticles are expected to have a wide range of applications. The objective of the present study is to improve the coating efficiency of gold shell formed on the surface of silica nanoparticles for SiO2@Au core-shell structure. For the efficient coating of gold shell, we attempt an in-situ synthesis method such that the nuclei of the gold nanoparticles are generated and grown on the surface of silica nanoparticles. This method can effectively form a gold shell as compared to the conventional method of attaching gold nanoparticles to silica particles. It is considered possible to form a dense gold shell because the problems caused by electrostatic repulsion between the gold nanoparticles in the conventional method are eliminated.

This study is about the basic design technology to radically increase the structural stability of structural shell or tube, which are utilized in a variety of large structures like aircrafts, plant, bridges and buildings. Recent studies have revealed that the plates stiffened by closed-sections ribs can be designed to have greater strength as well as the reduction of used number of stiffeners. Then, the analytical models were selected based on the huge steel tube design and the finite element modeling has been conducted using the ABAQUS. Through this study, the elastic buckling strengths are compared with the flat plate buckling stress and the improved effect in the local buckling strength due to the closed-section ribs are numerically verified.

BaTiO3-coated Fe nanofibers are synthesized via a three-step process. α-Fe2O3 nanofibers with an average diameter of approximately 200 nm are first prepared using an electrospinning process followed by a calcination step. The BaTiO3 coating layer on the nanofiber is formed by a sol-gel process, and a thermal reduction process is then applied to the core-shell nanofiber to selectively reduce the α-Fe2O3 to Fe. The thickness of the BaTiO3 shell is controlled by varying the reaction time. To evaluate the electromagnetic (EM) wave-absorbing abilities of the BaTiO3@Fe nanofiber, epoxy-based composites containing the nanofibers are fabricated. The composites show excellent EM wave absorption properties where the power loss increases to the high frequency region without any degradation. Our results demonstrate that the BaTiO3@Fe nanofibers obtained in this work are attractive candidates for electromagnetic wave absorption applications.

This study carried out finite element deflection analysis of cylindrical shell structures made of composite materials, which is based on the micro-mechanical approach for different fiber-volume fractions. The finite element (FE) models for composite structures using multi-scale approaches described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the effect of the material combination. New results reported in this paper are focused on the significant effects of the fiber-volume fraction for various parameters, such as fiber angles, layup sequences, and length-thickness ratios. It may be concluded from this study that the combination effect of fiber and matrix, largely governing the dynamic characteristics of composite shell structures, should not be neglected and thus the optimal combination could be used to design such civil structures for better dynamic performance.

본 연구에서는 쉘의 테두리를 보가 둘러싸고 있는 전통적인 형태와 모서리보를 제거한 형태의 모임지붕형 쌍곡포물선쉘구조의 유한요소해석결과비교를 통해 모서리보의 역할을 확인하고, 또한 지붕의 경사도의 영향을 분석하였다. 유한요소해석에 의하면 쉘면에 작용하는 하중은 쉘 대각선 방향의 아치작용을 통해 모퉁이의 지점에 직접 전달되므로 막이론에 비해 테두리보에는 부재력이 작게 작용하고 모퉁이의 지점 부분의 쉘에는 응력이 증가되는 것으로 나타났다. 모서리보를 제거하면 지점 부근의 쉘에 더욱 응력이 집중되고 경사진 모서리 부분의 처짐이 증가하는데 이와 같은 현상은 지붕의 경사도가 낮아짐에 따라 현저해지는 것으로 나타났다. 따라서, 모임지붕형 쌍곡포물선쉘 구조에서는 지점 부분의 쉘두께를 보다 증가할 필요가 있으며 경사도가 낮은 쌍곡포물선쉘 구조의 모서리보 제거는 주의가 필요한 것으로 나타났다.

본 연구에서는 실린더 형 쉘 구조물의 구조적 안정성에 대하여 해석 하였다. 임계하중은 하중을 점차적으로 증가 하여 구조물이 파괴가 발생 할 때의 상태에서 가장 작은 하중을 의미한다. 셀 구조의 안정성을 임계하중의 크기로 기초를 두고 해석 하였다. 실린더 형 쉘의 차분해석은 일차적 원통형 판구조와 같으므로 최근에 많은 연구의 대상이 되어왔다. 차분법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까지 효과적인 수치방법이다. 본 연구에

This paper analyzed the partial differential equations of laminated composite shells of revolution by using the finite difference method. The proof that numerical results are reasonable and accurate is obtained through converge ratio analysis and commercial program LUSAS for the structural analysis. The purpose of this study is to examine closely the engineering advantages and to analyze the structural behaviors of the anisotropic shells of revolution. Thus, the relevant reinforcement and most suitable arrangement of fiber to produce the highest strength are proposed through the numerical results according to a variety of parameter study. Namely, the distribution of displacements and stress resultants are analyzed according to the change of meridian's curvature, the ratio of height-width of shell, subtended angle, fiber angle, and so on. Using these distribution, the most suitable shell may be proposed to produce the highest strength. Also, the configuration of the entire laminated composite conical shells is analysed, and a variety of the design criterion of circular conical shell are proposed and studied in engineering view points.

동적 불안정 좌굴현상에 관한 연구는 다소 발표되고 있으나 주기성을 가진 히중하에서의 동적 좌굴을 다룬 연구는 그리 많지 않은 편이다. 주기성을 가진 하중하에서의 거동은 스텝 하중하에서 거동과는 다르리라 예상된다. 본 논문에서는 동적 불안정의 기본 메커니즘을 파악하기 위하여 2자유도의 얕은 EP(Elliptic Paraboliodal)쉘이 정현파 하중을 받았을 때의 직접좌굴과 간접좌굴 현상을 조사한다. Newma가-β법에 의한 수치적분을 이용하여 비선형 운동 방정식의 변위응답을 구하고 얻어진 비선형 변위응답으로 위상곡면선의 끌개를 비교하고, FFT(Fast Fourier Transform)에 의한 연속 응답 스펙트럼을 구해 동적 불안정 특성에 관해서 분석한다. 그 결과 동적 좌굴하중은 구조물의 고유주기와 외력 탁월진동수와의 관계에 크게 영향을 받는다.

쉘형 구조물의 동적 불안정 문제를 다룬 연구결과는 다소 발표되고 있으나 위상곡면을 이용하여 카오스 생성에 관한 기본적 현상을 다룬 연구는 거의 없는 실정이다. 동적 비선형 문제에서 여러 가지 초기조건에 의해 불안정 현상이 민감하게 발생하는 이유를 파악하기 위해서는 위상곡면에서 끌개의 특성을 조사하여 동적 불안정 생성과정을 검토하는 일은 매우 중요하다. 본 연구에서는 얕은 EP 쉘이 스텝하중을 받을 때, 직접 좌굴과 간접 좌굴의 발생 경로를 파악하기 위하여 Galerkin 법에 의해 전개된 이산화 방정식을 구한다. 이를 수치해석 기법으로 위상곡선과 연속응답스펙트럼을 구해 동적 불안정 특성을 규명한다.

쉘형 구조물은 외력에 대해 효과적으로 저항할 수 있어, 두께를 얇게하면서 대공간 구조물을 만들 수 있는 장점이 있다. 이러한 장점은 구조형태에 크게 의존한다. 그러므로 많은 설계자들은 최적 형태를 설계에 반영하고자 하지만, 이는 간단치 않다. 지금까지 보다 최적의 형태를 얻기 위한 많은 기법들이 발표되어 왔고, 이들은 각각 장단점을 나타낸다. 본 논문에서는 최적의 곡면을 얻기 위해 기하학적 비선형을 고려한 유한요소법을 이용한 비교적 간단한 방법을 제안한다. 이러한 방법을 이용하여 다양한 쉘형 곡면에 적용하여 최적곡면을 얻고, 이를 비교한다.

본 논문에서는 적응적 h-유한요소 세분화에 의한 박스형 절판 구조물의 선형좌굴 유한요소해석법을 제안한다. 면내회전 자유도를 갖는 변절점 평판쉘유한요소를 사용하여 유한요소의 거동을 개선하고 6자유도를 갖는 다른 유한요소와의 자유도의 연결을 용이하게 한다. 이와 같이 개발된 평판쉘유한요소에 의하여 박스형 절판구조물의 정확한 구조해석이 가능한데, 변절점유한요소를 정식화함으로써 적응적 h-유한요소 세분화시에 발생하는 다른 패턴의 사각형 유한요소 세분화망의 연결을 용이하게 해결한다. 오차평가에 대한 개선된 응력장을 얻기 위하여 상위수렴 조각회복법을 적용한다. 이와 같이 상위수렴 조각회복법에 의한 개선된 응력장에 의하여 구성된 유한요소 세분화망을 이용하여 좌굴하중과 좌굴모드를 자동적으로 구할 수 있도록 한다.

In this work, a finite element model is presented for geometrically non-linear analysis of shell structures. Finite element by using a three-node flat triangular shell element is formulated. The non-linear incremental equilibrium equations are formulated by using an updated Lagrangian formulation and the solutions are obtained with the incremental/iterative Newton-Raphson method and arc length method. Some of results are presented for shell structures. The obtained results are in good agreement with the results available in existing literature.