본 연구에서는 육계사에 차열 페인트와 히트펌프의 적용에 따른 내부 온도 변화를 분석 하였다. 이를 위하여 환기율, 환기 방법, 시간별 환기 변화에 따른 실험 조건을 설정하였으며 육 계사 외부 및 내부 기온을 측정하였다. 그 결과, 차열 페인트를 도포한 육계사에서는 최대 1－2°C 실내 기온 상승을 억제하 는 효과가 나타났으며 히트펌프를 가동한 육계사에서는 외기 온도의 영향을 제일 적게 받는 환기율 0%일 때 내부 기온 감소 가 제일 크게 나타났다. 계사 내부의 온도가 외기 온도보다 높 을 경우에는 환기율을 높게 설정하여 환기팬을 이용한 냉방이 더욱 효과적이나 계사 내부 온도가 외기 온도와 유사하거나 낮을 경우에는 히트펌프를 이용하는 것이 가장 효과적일 것으 로 판단된다. 히트펌프 가동 시 외기 온도의 영향이 적은 환기 율을 0%로 설정하였을 때 내부 기온이 가장 큰 폭으로 감소하 였으나 실제 육계사에서는 분진, 이물질, 암모니아 등을 고려 하여 최소환기율 정도로 환기율을 설정한 후 히트펌프를 가동 하는 것이 가장 효율적일 것으로 판단된다. 본 연구는 실험 기 간이 짧아 데이터가 많지 않으며 실제 육계가 사육되고 있는 환경에서 실험을 진행한 것이 아니라는 한계가 있다. 향후 후 속 연구로 실제 닭이 사육되고 있는 환경에서의 히트펌프 효 과 분석과 히트펌프의 전력사용량, 냉방부하, 환기팬 가동시 간 등 다양한 환경인자를 포함한 연구가 진행되어야 할 것으 로 판단된다.

최근 경주지진과 포항지진 피해사례에서 보이듯 조적벽체 구조물의 붕괴 위험이 사회적으로 큰 주목을 받고 있다. 본 연구는 수평하중에 대한 강성이 구조적으로 취약한 조적벽체 구조물에 대하여 개선된 보강재 설계 및 이를 통한 구조성능 평가를 수행하였다. 선행기술에서 제시한 FRP Plate 보강재의 경우 외부 부착 시 계면 부착파괴에 의한 보강성능 저감이 발생하는 것을 고려하여 본 연구에서는 사전제작 매립형 T-Joint BFRP 보강재를 개발하였으며, 이를 혼합 에폭시계 연성페인트와 혼합 하여 보강 구조물의 마감효과 및 에너지흡수성능을 개선하는 방법으로 제안하였다. 실험 결과, 보강 시험체의 강성은 약 1.37배, 에너지소산능력은 약 2.59배 개선됨을 확인하였다.

최근 국내 구조물들의 노후화가 진행됨에 따라 구조물 보강과 관련된 연구에 대한 관심이 높아지고 있다. FRP보강은 노후화가 진행되어 성능이 저하된 구조물을 보강하는데 사용되며 주로 유리섬유를 사용한다. 그러나 이 유리섬유는 환경적 재 활용의 문제점이 대두되고 있다. 따라서 본 연구에서는 친환경적이고 내열성이 우수한 현무암 섬유를 활용한 휨 보강 플레이트 적용방법과 기존 FRP 외부부착의 문제점을 해소하기 위하여 연성 코팅용 보강페인트를 활용한 휨 보강 페인팅 적용방법을 통하여 각각의 경우에 대한 3점 휨 시험을 통하여 보강성능을 평가, 비교하였다. 그 결과 BFRP 보강의 경우 무보강 시험체에 비하여 약 1.2배 높은 강성 값을 나타내었고 콘크리트-BFRP 계면 부착력에 의한 연성효과도 나타났다. 반면 연성 코팅 보강페인팅 적용을 통한 휨 보강의 경우, 무보강 시험체에 비하여 약간의 개선효과는 나타났으나 실험체 제작의 오차 등을 고려할 때 실질적인 보강효과는 크게 나타나지 않았다. 따라서 연성 코팅페인팅을 활용한 보강방법의 경우, 향후 다양한 시공조건에 따른 추가연구가 필요할 것으로 판단된다.

Other countries(USA, Europe) have performed the fire resistance design of buildings by the alternative performance design methods, which are based on fire engineering theories. However, in Korea, the process on the alternative fire resistance performance design has only suggested without any applications for real steel structures. Therefore, In the case of steel structures stagnant research on refractory measures face difficulties in introducing fire resistance design. In this study, first of all, Intumescent paint was analyze the thermal properties(thermal conductivity, specific heat and density). In Sequence, using the section factor by H-standard section propose of section concrete filled steel tube and hollow. finally presents a reasonable thickness Intumescent paint takes time to target performance of the proposed cross-section steel tube.

A new method using anion generating paint was tested to decrease the concentration of volatile organic compound gas which is the main cause of sick house syndrome in living atmosphere. The method can be widely applied with low cost because the anion generating paint uses the cheap and abundant aluminosilicate mineral as raw materials and maintains the ability to remove the VOCs in dark condition, which was the main demerit of conventional method using TiO2 photo catalyst. The effect of raw mineral treatment on the efficiency of VOCs removal was studied by applying the prepared anion generating paint on specimen surface and monitoring the content of VOCs within controlled box for 24 hours. The content of formaldehyde and toluene was decreased by 88.9% and 72.2%, respectively. The result of field test done in actual living apartment showed the removal ability of 92.2% for formaldehyde, 10% for benzene, 95.9% for toluene, 74.4% for ethylbenzen, 73.8% for p-xylen, and 83.7% for styrene. The concentration of other VOCs were also decreased to below the standard level recommended by Ministry of Environment.

Toluene, xylene, styrene, and ethylbenzene are main volatile organic compounds emitted from painting materials. According with the development of gas chromatography equipment, it has been possible to analyze the low level of ambient VOCs concentration. In this study, the limit of detection and the limit of quantitation were analysed for VOCs originated from painting materials in GC/FID/liquid injection analysis system. The results of %RSD for four standard solutes showed a great reproducibility in terms of detection time and detection area. The limit of detection and the limit of quantitation in SRI GC appeared to be 501.64 pg and 1.67 ppb for toluene, 572.03 pg and 1.90 ppb for ethylbenzene, 1077.22 pg and 3.59 ppb for m,p-xylene, 36563.35 pg and 121.76 ppb for styrene, respectively.

For recipe prediction of colorant proportion showing nonlinear behavior, we modeled the effects of colorant proportion of basic colors on the target colors and predicted colorant proportion necessary for making target colors. First, colorant proportion of basic colors and color information indicated by the instrument was applied by a linear model and a multi-layer perceptrons model with back-propagation learning method. However, satisfactory results were not obtained because of nonlinear property of colors. Thus, in this study the neuro-fuzzy model with merit of artificial neural networks and fuzzy systems was presented. The proposed model was trained with test data and colorant proportion was predicted. The effectiveness of the proposed model was verified by evaluation of color difference(δE).

In this study, we attempt to analyze biofilter"s removal efficiency for volatile organic compounds from paint factory. this experiment conducted in a pilot plant with microorganisms immobilized polyurethane foam. 7 main components (Toulene, MEK, MIBK, o-Xylene, m-Xylene, Butyl acetate, Ethyl benzene) emitted from factory ventilation opening were analyzed. During the test period, the biofilter treated VOCs in 5 seconds (EBCT) and pressure drop was less than 30 ㎜H₂O/m in media. Removal efficiencies of all components were between 80~90% in 10 days of operation and higher than 94% after 40 days. The result of this experiment shows that biofilter can be useful technology for VOCs removal in the paint industry.

In this study, the paint, which has very close relationship to the of indoor air quality, was examined for the air pollution leveling test, and using the various passive sampler, the test was evaluated on the regard of TWA(Time Weighted Average). This study is to examine how the air pollution levels differ between the regular paint that is used for public and the new developed environment friendly paint. The consecutive experiments were performed in the small chamber test to investigate the VOCs and formaldehyde, ammonia emissions and characteristics from paint which are commonly used as the complete material of building. In conclustion, the natural paint showed the highest emission of VOCs among the selected paints, and water paint showed the highest contents of ammonia. Formaldehyde showed N.D(Not Detected) in most of tests and found a small amount in vinyl paint however, it was not as bad as to fail the certify level of building materials. It is recommended to constantly develop the chamber system and it will be very much possible to be used for the estimation of indoor air pollutants from the various paints and other complete materials.

The research measured cracks by visualizing them through mechano- luminescence(ML) paint. By applying M-L paint on the surface of the specimen and using the 3-point bending test. Through the results of this research, we confirmed the crack propagation speed by section and the mechanical correlation such as between loads and cracks and between deflection and cracks, which means this research was quite successful in analyzing the characteristics of cracks.