국내 특수교 대부분은 사장교와 현수교로 케이블 교량 형식이다. 특수교는 규모 면에서 가장 유지관 리가 우선시 되는 사회 기반 시설물로 장기적이고 체계적인 유지관리 전략이 필요한 구조물이다. 다시 말해서는 케이블 교량은 대부분 사용 수명이 100년 이상 되는 교량으로 일반적인 중·소규모 교량의 유지관리와는 차별화된 관리가 요구되고 있다. 케이블 교량에서 구조물 상부를 지지하는 케이블은 주 요 부재이므로 구조물의 안전성을 확보하기 위해서는 케이블에 대한 철저한 유지관리가 필요하다. 진 동에 의한 피로 손상은 케이블 사용 수명을 단축하게 하는 주요 원인으로, 풍하중으로 인해 발생한 케 이블 과진동(풍우진동, 웨이크 갤로핑, 지점 가진에 의한 진동 등)은 교량의 안전성에 영향을 미쳐 붕 괴 사고로도 이어질 수 있다. 국내외적으로도 케이블 시스템의 과진동 및 이로 인한 건전성 확보 문제 가 지속해서 대두되고 있는 실정이다. 케이블 진동에 영향을 미치는 풍하중은 정적 풍하중과 동적 풍 하중을 구분할 수 있으며 풍하중 종류를 고려하여 케이블 제진 대책을 마련해야 한다. 한편, 케이블 교량 유지관리 업무에서는 구조해석과 같은 공학적인 판단뿐만 아니라 전문가 경험에 의한 판단도 중 요한 요소로 유사 교량 형식의 사례 조사에 의한 분석도 요구된다. 본 연구에서는 케이블 교량에서의 풍하중에 의한 진동 발생 원인별 사례 및 그에 따른 풍하중에 대한 제진 대책 적용 사례를 조사하였 고, 이를 통해 케이블 교량의 유지관리 업무에 활용될 수 있도록 소개하고자 한다.

In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the “Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges” is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.

In this study, a field bridge test was conducted to find the dynamic properties of cable supported bridges with resilient-friction base isolation systems (R-FBI). Various ambient vibration tests were performed to estimate dynamic properties of a test bridge using trucks in a non-transportation state before opening of the bridge and by ordinary traffic loadings about one year later after opening of the bridge. The dynamic properties found from the results of the tests were compared with an analysis model. From the result of the ambient vibration tests of the cable supported bridge with R-FBI, it was confirmed that the dynamic properties were sensitive to the stiffness of the R-FBI in the bridge, and the seismic analysis model of the test bridge using the effective stiffness of the R-FBI was insufficient for reflecting the dynamic behavior of the bridge. In the case of cable supported bridges, the seismic design must follow the “Korean Highway Bridge Design Code (Limit State Design) for Cable supported bridges.” Therefore, in order to reflect the actual behavior characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure should be proposed.

이 연구에서는 교량 주요부재의 내진보강 우선순위를 합리적으로 결정하는데 그 목적이 있다. 평가대상으로 케이블 교량을 선정하였으며 정량적 지표인 주요부재의 취약도를 평가하기 위해 확률분포에 근거한 신뢰도를 활용하였다. 확률변수인 안전계수는 주하중(고정하중, 활하중)과 부하중(지진, 내풍, 온도 등)을 고려하였고 지진하중은 교량의 사용수명 동안 발생 가능한 진진을 적용하였다. 이러한 신뢰도를 근간으로 각 주요부재의 취약도 점유율을 확인한 결과 받침(23.8%)이 가장 취약하였으며 받침콘크리트(20.5%), 교각(18.9%), 기초(17.3%), 보강형(14.6%), 케이블(5.0%) 순으로 나타났다.

Currently, the cable safety management of cable supported bridges is calculated by the ratio of the measured tension to the design tension. The measurement of the tension is performed by indirectly estimating the acceleration measured at the cable surface in terms of the tension. The method of converting the cable vibration response (acceleration) into the tension is disadvantageous in that the damage of the individual strand (or wire) in the cable is not clearly reflected in the tension because the measurement is not reliable and is managed only by the total tension. The purpose of this study is to improve the cable safety management system by evaluating how the damage of individual strand of MS type cable, which is mainly applied to cable-stayed bridges, affects the safety level managed by level of cable tension.

이 연구에서는 사장교 및 현수교에 부착된 지진가속도계측기를 활용하여 교량의 안전성을 긴급하게 평가할 수 있는 기법을 제안한다. 실측된 지진가속도계측기의 상시 응답을 이용하여 구조해석 모델의 고유주파수와 비교를 통해 최대한 유사한 동적특성을 갖도록 모델링을 개선한다. 설계지진에 대한 지진해석을 수행하여 지진가속도계측기 설치 위치별 최대 변위를 도출하며, 도출된 변위는 사전에 관리기준치로서 시스템에 기 입력된다. 지진발생 시 실시간으로 측정된 가속도 시간이력을 필터링 후 2중적분을 통해 변위시간이력으로 변환한 뒤 최대 변위를 추출한다. 최종적으로 시스템에 기 입력된 관리기준치와 추출된 변위와의 비교를 통해 안전성을 평가한다. 경주지진 시 기록된 데이터를 활용한 12개 특수교량의 긴급 안전성평가 수행을 통해 제안된 방법의 적용성을 확인한다.

This study is proposed to establishment of collaborative environment utilizing BIM-based digital model for cable bridge oversea market entry. It is important to utilization of digital model based framework as such analysis interface, pre-construction technology, data sharing system by design company, general contractor, maintenance agent and government office.

It is important to operate appropriate measurement system of cable bridges for the efficient construction and maintenance. The main results of study on the optimal construction detail method of measurement for individual cable bridge are described. In this paper, the basic guidelines for the cable bridges measurement system is presented such as sensor classification, installation location and performance standard for the installation of the optimal measurement system of cable bridges on expressways.

이 연구는 2016년 발생한 경주 지진의 규모 4.5이상의 3개 지진, 즉, 전진(규모 5.1), 본진(규모 5.8), 여진(규모 4.5)에 대한 국내 공용 중 케이블교량의 지진응답 특성을 제시한다. 교량 주위의 자유장과 교량 내 지정된 위치에 설치된 지진가속도계측기에서 측정된 지진가속도응답기록을 이용하여 케이블교량의 각 구조부재별 지진응답을 분석한다. 측정 가속도 시간이력의 푸리에 변환을 이용한 주파수 영역 해석을 통하여 교량의 동적 거동 특성을 분석한다. 주탑 상부에서의 최대가속도를 자유장 위치에서의 최대가속도로 표준화하여 주탑 상부에서의 가속도 증폭에 대하여 분석한다. 분석 결과를 통해 지진 재난에 대응하기 위한 케이블지지교량의 지진가속도계측기 위치별 관리 기준치 개발의 필요성에 대해 논의한다.

It is important to operate appropriate measurement system of cable bridges for the efficient construction and maintenance. The main results of study on the optimal construction detail method of measurement for individual cable bridge are described. In this paper, the basic guidelines for the cable bridges measurement system is presented such as sensor classification, installation location and performance standard for the installation of the optimal measurement system of cable bridges on expressways.

This paper aims to evaluate the safety of the cable supported bridges under the occurrence of damages on cable system. There are more than 50 cable supported bridges currently built in the Korean peninsula and efficient and systematic maintenance and management are in great demand. However, safety of the bridges cannot be under estimated and should be properly evaluated. In this paper, two bridges (one cable-stayed bridge and one suspension bridge) in South Korea were investigated their safety based on the damage scenario of cable system. FEM analysis for safety evaluation of the two bridges was conducted and the results were explained. The result could be used by operators and owners of bridges for the future maintenance and management.

This paper introduces and summarizes damage cases of cable for cable supported bridges. The damage cases of similar bridge types may become an important database in the maintenance and management of cable supported bridges in the future. It will also be used as a base material for improving and developing the technology of inspection and maintenance of cable supported bridges.

This paper introduces and summarizes damage cases of cable for cable supported bridges. The damage cases of similar bridge types may become an important database in the maintenance and management of cable supported bridges in the future. It will also be used as a base material for improving and developing the technology of inspection and maintenance of cable supported bridges.

This study was conducted to build an emergency action plan (EAP) for cable-supported bridges in South Korea. First, accidents happened on Cable-supported bridges were investigated and categorized based on the types. Second, accident scenarios were built-up regarding the types. Two bridges were selected for planning the emergency action following the accident scenarios. The emergency action plan established in this study could be used for the management of cable-supported bridges in the future.

The thermal load must be considered to design cable supported bridges as a variable load. The thermal load recommended by Korean design code might be different to real temperature distribution in the bridges because the thermal load proposed by Korean design code is referred to Eurocode, etc. Therefore this study proposes the temperature distribution of cable supported bridges In Korea based on measurements.

Many accidents by side-wind have been reported worldwide when vehicle passes through the bridges. In order to solve this problem, it needs to investigate the accident cases and to classify the accident types. Therefore, it can lead to adequate plans for prevention.

The impact factor of general road bridges is typically calculated according to Korea Highway Design Code(KHDC) or Design Guidelines For Cable-Supported Bridges in Korea. Above design codes define the impact factor as the function of span length or effective span length. But calculated impadt factors from this function are different to the measured values of long-span bridges such as cable-stayed bridge, suspension bridge. There are several methods to estimate the impact factor of cable supported bridges. In this study, the impact factor of cable-stayed bridges is estimated from dynamic load tests and compared to calculated values from the various design codes.

This study presents a technical overview of snow and ice accretion on cable-stayed bridges and suspension bridges. Specially, it focuses on measures against snow or ice falling into bridge decks. Many different types of de-icing and anti-icing are discussed in this paper.

In this study, measured data of cable-supported bridge’s thermal expansion and contraction were analyzed. To evaluate structural behaviors by temperature variations, measured data were compared with theoretical values by correlation analysis between thermal movements and temperatures. Additionally, the cumulative displacements were analyzed. Through the analysis of the results, the evaluation methods of cable-supported bridge's thermal expansion and contraction is suggested.