The development of existing radioactive waste (RI waste) management technologies has been limited to processing techniques for volume reduction. However, this approach has limitations as it does not address issues that compromise the safety of RI waste management, such as the leakage of radioactive liquid, radiation exposure, fire hazards, and off-gas generation. RI waste comes in various forms of radioactive contamination levels, and the sources of waste generation are not fixed, making it challenging to apply conventional decommissioning and disposal techniques from nuclear power plants. This necessitates the development of new disposal facilities suitable for domestic use. Various methods have been considered for the solidification of RI waste, including cement solidification, paraffin solidification, and polymer solidification. Among these, the polymer solidification method is currently regarded as the most suitable material for RI waste immobilization, aiming to overcome the limitations of cement and paraffin solidification methods. Therefore, in this study, a conceptual design for a solidification system using polymer solidification was developed. Taking into account industrial applicability and process costs, a solidification system using epoxy resin was designed. The developed solidification system consists of a pre-treatment system (fine crush), solidification system, cladding system, and packing system. Each process is automated to enhance safety by minimizing user exposure to radioactive waste. The cladding system was designed to minimize defects in the solidified material. Based on the proposed conceptual design in this paper, we plan to proceed with the specific design phase and manufacture performance testing equipment based on the basic design.

A vitrification facility control area is formed to control and monitor the vitrification facility process, and the control system is designed to manage the vitrification facility more safely and effectively. The control system is largely composed of a process control system and an off-gas monitoring system. The process control system is operated so that operation variables can be maintained in a normal state even in normal and transient conditions, and is designed so that the vitrification facility can be stably maintained in the event of an abnormality in the facility. The process control system consists of Programmable Logic Controller (PLC) and Local Control Panel (LCP), which controls and monitors each unit device. In addition, operation variables are provided to the operator so that the operator can manage operation variables during process control in a centralized manner for the operation of the vitrification facility. The off-gas monitoring system is operated to monitor whether the off-gas discharged to the environment is stably maintained within the standard level, and the off-gas is monitored through an independent monitoring system.

After melting glass at a high temperature of about 1,100 degrees in the Cold Crucible Induction Melter (CCIM) of the vitrification facility, radioactive waste is fed into the CCIM to vitrify radioactive waste. Accordingly, since the metal sector of the CCIM contacts the high-temperature molten glass, cooling water is supplied to continuously cool the metal sector. The cooling system is divided into primary and secondary cooling water systems. The primary cooling water flows inside the metal sector of the CCIM to maintain the metal sector within normal temperature, thereby forming a glass layer between the metal sector and the high-temperature melting glass. The secondary cooling system is a system that cools the primary cooling water that cools the metal sector, and removes heat generated from the primary cooling system. In addition, it is designed to stably supply cooling water to the secondary cooling water system through an emergency cooling water system so that cooling water can be stably supplied to the secondary cooling water system in the event of secondary cooling water loss. Therefore, it is designed to maintain the facility stably in the event of loss of cooling water for the CCIM of the vitrification facility.

본 연구에서는 막여과공정, 오존접촉공정, 활성탄흡착공정, 자외선소독공정 등이 계층형으로 배치된 정수처리 실증시설의 설계 및 운영을 통해 수직형 정수 처리시설의 최적 설계/운영방안을 도출하고자 하였다.

In case of many products placed on the production line in automobile production, some line is personnel visually identifiable, such as CCTV, while the rest areas are not identifiable. However, because the position of accidents is not scheduled and every accidents should be analyzed at every point, every accidents is not easy because you need to an immediate response. The record cause of the accident is difficult to understand, not until after the accident for the accident cause analysis of fragmentary and mechanical information so that future accidents have difficulty measures be established. To prevent this, the car accident occurred in the manufacturing plant personnel to deploy and monitor in every area of enterprise is too burdensome labor costs too high. In this study, automated car production plant and load transfer system crash, accident collision and records are available for real-time wireless transmission, the administrator determines that situation can be immediately developed the electronic mono rail system(EMS). You will start to develop the control of EMS and stop control is critical for the correct parts first perform CAE analysis to develop a prototype

인삼은 반음지성 식물로 해가림을 위한 해가림막 시설이 필요하다. 하지만 해마다 강해지는 강풍이나 태풍으로 인해 많은 시설물이 피해를 입고 있으며, 특히 인삼재배시설의 경우 시설물이 연결되어 하나의 단지를 이루고 있어 피해가 크다. 해가림막은 차광을 위한 것이지만 바람이 투과하는 재질로 이루어진 것도 있어 강풍에 의해 바람이 투과 하는지 아닌지를 판단할 필요가 있다. 따라서 본 연구에서는 인삼재배시설의 대표적인 두 가지의 설치유형(관행식, 후 주연결식)을 고려하여 모형을 재현하였다. 그리고 먼저 열선풍속계를 이용하여 투과실험을 선행한 후 다점풍압계를 이용하여 본 실험을 수행하여 인삼재배시설의 골조용 풍압분포 특성을 규명하였다. 실험 결과는 인삼재배시설의 설치유형에 따라 하방향 순압력계수와 상방향 순압력계수로 나누어 그래프로 정리하였다.

The purpose of this study is to identify the characteristics of the use of the western building system with the change of the architectural design in the Japanese colonial period focused on the facility built by Joseon Government-General in 1910s. Through the 131 cases of governmental building, the tendency of the use of western building system. After 1910, Japanese Imperialism adopted the western wooden building system which main structure was made with combination of small pieces of timber for building the modern governmental facility because of the political and financial intention. So, all facilities were designed similarly by the structural module and the facade was finished by the feather boarding in the same with the ‘sitamitakei-giyohu’ in Japan. the functional requirements of each facility was not revealed. Such an western wooden building system was used until 1920s with the change of the facade by the mortar coating. But, in 1920s-1930s, the building system have begun to change. The use of the brick system caused some changes although the planing concept was still lasted. On the other hand, the use of the reinforced concrete led to more changes on the overall scheme.