Perfluorooctanoic acid(PFOA) was one of widely used per- and poly substances(PFAS) in the industrial field and its concentration in the surface and groundwater was found with relatively high concentration compared to other PFAS. Since various processes have been introduced to remove the PFOA, adsorption using GAC is well known as a useful and effective process in water and wastewater treatment. Surface modification for GAC was carried out using Cu and Fe to enhance the adsorption capacity and four different adsorbents, such as GAC-Cu, GAC-Fe, GAC-Cu(OH)2, GAC-Fe(OH)3 were prepared and compared with GAC. According to SEM-EDS, the increase of Cu or Fe was confirmed after surface modification and higher weight was observed for Cu and Fe hydroxide(GAC-Cu(OH)2 and GAC-Fe(OH)3, respectively). BET analysis showed that the surface modification reduced specific surface area and total pore volumes. The highest removal efficiency(71.4%) was obtained in GAC-Cu which is improved by 17.9% whereas the use of Fe showed lower removal efficiency compared to GAC. PFOA removal was decreased with increase of solution pH indicating electrostatic interaction governs at low pH and its effect was decreased when the point of zero charges(pzc) was negatively increased with an increase of pH. The enhanced removal of PFOA was clearly observed in solution pH 7, confirming the Cu in the surface of GAC plays a role on the PFOA adsorption. The maximum uptake was calculated as 257 and 345 μg/g for GAC and GAC-Cu using Langmuir isotherm. 40% and 80% of removal were accomplished within 1 h and 48 h. According to R2, only the linear pseudo-second-order(pso) kinetic model showed 0.98 whereas the others obtained less than 0.870.

There is a need for the purification of indoor air owing to a high rate of pollution in today’s world. For this, cabin air filters (CAFs) are widely used, which requires the addition of certain adsorbents to increase the volatile organic compound (VOC) removal efficiency. However, this addition causes high-pressure resistance, which may hamper commercial applications by requiring more energy and negatively affecting fresh air delivery rate. Hence, in this study, a high-performance combined CAF (CCAF) with excellent dust and chemical filtration performance and low differential pressure was prepared using granular activated carbon (GAC)/activated carbon fiber (ACF) mixed medium. The GAC/ACF mixed medium had higher air permeability than the ACF medium of the same weight, and it exhibited similar ultrafine dust filtration performance to the ACF medium without an increase in differential pressure. In addition, the GAC/ACF mixed medium showed excellent gas removal performance without increasing differential pressure by combining the VOC removal characteristics of the GAC and ACF filter media. The improved VOC removal performance of the GAC/ACF mixed medium was due to the hybrid effect of the hierarchical pore structures of the GAC and the nearly uniform pore structures of the ACF, which resulted in a slow and increased gas adsorption by the GAC and rapid gas adsorption of the ACF.

Prussian blue is known as a superior material for selective adsorption of radioactive cesium ions; however, the separation of Prussian blue from aqueous suspension, due to particle size of around several tens of nanometers, is a hurdle that must be overcome. Therefore, this study aims to develop granule type adsorbent material containing Prussian blue in order to selectively adsorb and remove radioactive cesium in water. The surface of granular activated carbon was grafted using a covalent organic polymer (COP-19) in order to enhance Prussian blue immobilization. To maximize the degree of immobilization and minimize subsequent detachment of Prussian blue, several immobilization pathways were evaluated. As a result, the highest cesium adsorption performance was achieved when Prussian blue was synthesized in-situ without solid-liquid separation step during synthesis. The sample obtained under optimal conditions was further analyzed by scanning electron microscope-energy dispersive spectrometry, and it was confirmed that Prussian blue, which is about 9.7% of the total weight, was fixed on the surface of the activated carbon; this level of fixing represented a two-fold improvement compared to before COP-19 modification. In addition, an elution test was carried out to evaluate the stability of Prussian blue. Leaching of Prussian blue and cesium decreased by 1/2 and 1/3, respectively, compared to those levels before modification, showing increased stability due to COP-19 grafting. The Prussian blue based adsorbent material developed in this study is expected to be useful as a decontamination material to mitigate the release of radioactive materials.

실 산성 도금폐수를 입상활성탄(GAC)이 유동메디아로 첨가된 유동상 멤브레인 반응기를 이용하여 처리하였다. GAC 유동조건에서 적용 투과플럭스에 대해 시간에 따른 흡입압의 증가는 관찰되지 않았다. 폐수의 중성 pH에서 파울링 속도는 산성 조건에 비해 GAC 유동조건에서 크게 감소하였다. 해당 폐수의 용액 pH 증가는 입자크기의 증가를 가져왔고 이는 멤브레인 표면에서 상대적으로 성긴 구조의 케이크층 형성을 야기시켰다. 유동상 멤브레인 반응기에서 GAC 유동 하에 95% 이상의 COD 제거율이 관찰되었으며 총부유물질은 거의 완벽하게 제거되었다. 실 도금폐수의 pH에서, 유동상 멤브레인 반응기의 구리 및 크롬의 제거는 거의 관찰 되지 않았다. 그러나 pH를 중성으로 증가 시켰을 시 구리와 크롬의 제거율은 각각 99%와 94%까지 증가를 하였다. 적용해 준 pH에 상관 없이, 시안의 경우 95% 이상의 제거율을 달성하였다. 이는 유기물과 시안 착물 형성으로 인해 유동상 멤브레인 반응기 내 GAC의 강한 흡착으로 제거된 것으로 사료된다.

고강도, 내약품성, 무독성, 내연소성의 장점을 가지고 있는 PVdF (polyvinylidene fluoride) 나노섬유로 기공이 0.4 μm 평막을 제조한 후, 부직포와 평막으로 나권형 모듈을 제작하였다. 용존유기물의 흡착 제거를 위한 입상 활성탄(GAC, granular activated carbon) 흡착 컬럼과 자체 제작한 나권형 모듈로 혼성 수처리 공정을 구성하였다. 카올린과 휴믹산으로 조 제한 모사 용액을 대상으로, 처리수를 재순환하는 경우와 배출하는 경우 각각 GAC 충진량의 영향을 알아보았다. 여과실험 후 물 역세를 하여 회복률과 여과저항을 계산하였다. 또한, 탁도와 UV254 흡광도를 측정하여 GAC의 흡착 효과를 고찰하였 다. 그 결과, 처리수를 재순환하는 경우와 배출하는 경우 모두 탁도 처리율에는 GAC 충진량의 영향이 없었다, 하지만 GAC 의 UV254 흡광도 처리율이 처리수를 순환하는 경우 0.7~3.6%이었는데, 처리수를 배출하는 경우 3.2-5.7%로 증가하였다. 처리 수를 순환하는 경우 GAC의 충진량이 증가함에 따라, 가역적 여과저항(Rr)과 비가역적 여과저항(Rir)은 감소하는 경향을 보였 다. 그러나 총여과저항(Rt)은 거의 일정하였고, 물 역세 회복률(Rb)은 다소 증가하는 경향을 보였다.

The characteristics of filter/adsorber granular activated carbon (F/A GAC) were investigated by measuring various parameters, which include surface area, pore volume, abrasion number, floater, and water-soluble ash. The correlation between parameters was also evaluated. Moreover, rapid small-scale column test (RSSCT) was conducted for adsorption characteristics. Thirteen F/A GAC were tested, and the average values of abrasion number and water-soluble ash were 88.9 and 0.15%, respectively. F/A GAC with the larger external surface area and greater mesopore volume had the lower abrasion number, which indicated that it was worn out relatively easily. Water-soluble ash of coconut-based GAC (about 2.6%) was greater than that of coal-based GAC (less than 1%), and the pH of solution was increased with GAC, which had the higher water-soluble ash. On the other hand, floater of thirteen F/A GAC was divided as two groups, which one group had relatively higher floater (2.7~3.5%) and the other group had lower floater (approximately 0.5%). The results of RSSCT indicated that coconut-based GAC (i.e. relatively higher water-soluble ash) had less adsorption capacity. Moreover, adsorption capacity of coal-based GAC with larger surface area and greater mesopore volume was superior to others.

기공 0.4 μm PVDF 나노섬유 정밀여과 나권형 모듈과 GAC 컬럼의 혼성공정에서 모사용액을 순환 없이 선형유속 0.013 m/s, TMP를 0.5 bar 조건으로 GAC 충진량을 변화시키면서 실험하였다. 또한 동일한 혼성공정에서 모사용액을 순환시키면서 선형유속 0.026 m/s, TMP 1.5 bar의 조건으로 GAC 충진량의 영향을 고찰하였다. 탁도와 UV254 흡광도(DOM) 처리율을 비교하였는데, 탁도 처리율에는 영향이 없었으나, GAC의 충진량이 많을수록 DOM 이 증가하였다. 하지만 TMP와 유속이 높은 조건인 순환이 있는 실험에서 GAC에 의한 DOM 처리율이 더 낮은 이유는 순환으로 인해 모사용액 농도가 낮아졌기 때문인 것으로 판단된다.

강도가 강하고 내약품성, 무독성, 내연소성의 장점을 가지고 있는 PVdF (polyvinylidene fluoride) 나노섬유로 기공이 0.4 μm 평막을 제조한 후, 그 평막으로 부직포를 첨가하여 나권형 모듈을 제작하였다. 카올린과 휴믹산으로 조제한 모사용액과 순수를 대상으로 나권형 모듈의 투과선속과 처리율을 비교하여 pH의 영향을 알아보았고, 여과실험 후 물 역세척을 하여 회복률과 여과저항을 계산하였다. 또한, 나권형 모듈을 통과한 처리수를 입상 활성탄(GAC, granular activated carbon)으로 채워진 컬럼에 통과시킨 후, 탁도와 UV254 흡광도를 측정하여 GAC의 흡착 효과를 고찰하였다.

The widespread occurrence of dissolved endocrine disrupting compounds(EDCs) and pharmaceutical active compounds(PhACs) in water sources is of concern due to their adverse effects. To remove these chemicals, adsorption of EDCs/PhACs on granular activated carbon(GAC) was investigated, and bisphenol A, carbamazepine, diclofenac, ibuprofen, and sulfamethoxazole were selected as commonly occurring EDCs/PhACs in the aquatic environment. Various adsorption isotherms were applied to evaluate compatability with each adsorption in the condition of single-solute. Removal difference between individual and competitive adsorption were investigated from the physicochemical properties of each adsorbate. Hydrophobicity interaction was the main adsorption mechanism in the single-solute adsorption with order of maximum adsorption capacity as bisphenol A ≻ carbamazepine ≻ sulfamethoxazole ≻ diclofenac ≻ ibuprofen, while both hydrophobicity and molecular size play significant roles in competitive adsorption. Adsorption kinetic was also controled by hydrophobicity of each adsorbate resulting in higher hydrophobicity allowed faster adsorption on available adsorption site on GAC. EDCs/PhACs adsorption on GAC was determined as an endothermic reaction resulting in better adsorption at higher temperature (40 ◦C) than lower temperature (10 ◦C#x25E6;C).

This study investigated the decomposition of fenitrothion in Smithion, which is applied on the golf course for pesticide, by the integrated Zero-valent iron(ZVI) and Granular activated carbon(GAC) process. First, the removal efficiencies of the fenitrothion by ZVI and GAC, respectively, were investigated. Second, the removal efficiencies of the fenitrothion by the integrated ZVI and GAC were investigated. The removal efficiencies of fenitrothion by ZVI were higher than those of TOC. The removal efficiencies of fenitrothion and TOC by GAC were similar. As the dosages of ZVI and GAC were increased, the removal efficiencies of fenitrothion and TOC increased. However, as the dosages of ZVI for pretreatment were increased, the adsorptions of fenitrothion on GAC were hindered.

This study carried out continuous column test for estimating the regeneration efficiency with regeneration times and temperatures. More times regenerated granular activated carbon (GAC) has more ash in the GAC and has less apparent density. Two times regenerated GAC (2nd re-GAC) could removed the Trihalomethanes (THMs) in the water for the first two week after starting continuous column test, on the other hand five times regenerated GAC (5th re-GAC) did not have adsorption capacity. The THMs concentration in the effluent was almost equal or higher than that of influent at the first time of continuous column test. 2nd re-GAC showed much more DOC adsorption capacity than 5th re-GAC and the GAC which was regenerated with 700 ℃ had highest DOC removal efficiency among the GACs with 600, 700, 800, 900 ℃ regeneration temperatures. It is anticipated the cost of GAC regeneration could be saved more 100 million won by reducing the furnace temperature of 3rd~4th and 5th~6th about 150 ℃ compared to the current regeneration condition.

This research was performed by means of several different virgin granular activated carbons (GAC) made of each coal, coconut and wood, and the GACs were investigated for an adsorption performance of iodine-131 in a continuous adsorption column. Breakthrough behavior was investigated that the breakthrough points of the virgin two coals-, coconut- and wood-based GACs were observed as bed volume (BV) 7080, BV 5640, BV 5064 and BV 3192, respectively. The experimental results of adsorption capacity (X/M) for iodine-127 showed that two coal- based GACs were highest (208.6 and 139.1 μg/g), the coconut-based GAC was intermediate (86.5 μg/g) and the wood-based GAC was lowest (54.5 μg/g). The X/M of the coal-based GACs was 2∼4 times higher than the X/M of the coconut-based and wood-based GACs.

This study accessed the adsorption characteristics of the 9 trihalomethanes (THMs) on coal-based granular activated carbon (GAC). The breakthrough appeared first for CHCl3 and sequentially for CHBr2Cl, CHBr3, CHCl2I, CHBrClI, CHBr2I, CHClI2, CHBrI2, and CHI3. The maximum adsorption capacity (X/M) for the 9 THMs with apparent breakthrough points ranged from 1,175 μg/g (for CHCl3) to 11,087 μg/g (for CHI3). Carbon usage rate (CUR) for CHCl3 was 0.149 g/day, 5.5 times higher than for CHI3 (0.027 g/day).

Adsorption and biodegradation performance of tetracycline antibiotic compounds such as ttetracycline (TC), oxytetracycline (OTC), minocycline (MNC), chlortetracycline (CTC), doxycycline (DXC), meclocycline (MCC), demeclocycline (DMC) on granular activated carbon (GAC) and anthracite-biofilter were evaluated in this study. Removal efficiency of seven tetracycline antibiotic compounds showed 54%∼97% by GAC adsorption process (EBCT: 5∼30 min). The orders of removal efficiency by GAC adsorption were tetracycline, demeclocycline, oxytetracycline, chlortetracycline, doxytetracycline, meclocycline and minocycline. Removal efficiencies of seven tetracycline antibiotic compounds showed 1%∼61% by anthracite biofiltration process (EBCT: 5∼30 min). The highest biodegradable tetracycline antibiotic compound was minocycline, and the worst biodegradable tetracycline antibiotic compounds were oxytetracycline and demeclocycline.

In this study, the characteristics of granular activated carbon (GAC) supported metal was investigated in an area influenced by flame discharge and temperature variation during irradiating microwave. The modified GAC was formulated by impregnating metal hydroxides of nickel (Ni/GAC), barium (Ba/GAC), copper (Cu/GAC), zinc (Zn/GAC), cobalt (Co/GAC) and lanthanum (La/GAC). Ba/GAC was selected as it showed lack of spark discharge and temperature increasing aspects. Comparison of adsorption and desorption amount of GAC and Ba/GAC showed that adsorption and desorption rate of the GAC were higher than those of Ba/GAC. The results show that the presence of barium can decrease adsorption/desorption rate because of plugging pore of GAC. Toluene regeneration rate of Ba/GAC was better than that of GAC due to barium loading. Finally, GAC with barium can be controled a rapid increasing temperature and spark discharge, increased the regeneration rate of toluene during desorption by irradiating microwave.

Quality test for activated carbon(AC) filter used for drinking water purifier is now an obligatory test and the standard material for valid purifying amount in water purifier performance test has been changed from residual chlorine to chloroform according to the notice of Ministry of Environment in 2006. Therefore, this study aimed to compare the ingredients of AC filters by confirming chloroform removal rate of AC filter and conducting 4 adsorption tests (Iodine, methylene blue decolorization, phenol value, ABS value) for AC filters provided by manufacturers. With water pressure of 1 kgf/cm2, 1,500 liters of prepared inflow went through to check chloroform removal rate. As a result, product with removal rate of below 60% from all products. On the other hand, 4 adsorption tests were conducted for filters in the market and filters from manufacturers. None of the products satisfied all 4 tests. In particular, they showed great shortage to the standard in phenol value and ABS value test. However, manufacturers' filter showed much better performance than filters in the market. Also, the result of valid purifying amount test for each of five products of appropriate product and inappropriate product based on filter quality test showed average 4,440 liters for appropriate product and average 2,620 liters for inappropriate product. According to the result, it is shown that the filter with good adsorption also had good chloroform removal efficiency and adsorption efficiency. Therefore, it is expected that customers can screen good quality product through obligatory conduct of filter quality test. However, it is considered that complementation in system is required for future inspection.

In this work, the characterization of adsorption of Cu, Zn and Cd on granular activated carbon in water has been studied. The factors that affect adsorption in boundary between activated carbon and wastewater are concentration, temperature, contact time, pH and so on. As the result of this study, the maximum adsorption amount of Cu occurred near pH 7, while that of Zn and Cd was near pH 9.6 and 10, respectively. As contact time and temperature are transformed, such factors as optimum contact time and temperature are taken into consideration in an adsorptive process of heavy metal because an adsorption and a reducing process occur. In isotherm of Freundlich, 1/n values of Cu, Cd capacity were between 0.16 and 0.5.

The adsorption experiment of phenol(Ph) from aqueous solution on granular activated carbon was studied in order to design the fixed-bed adsorption column. The experimental data were analyzed by unsteady-state, one-dimensional heterogeneous model. Finite element method(FEM) was applied to analyze the sensitivity of parameter and to predict the fixed-bed adsorption column performance on operation variable changes. The prediction model showed similar effect to mass transfer and intraparticle diffusion coefficient changes suggesting that both parameter present mass transfer rate limits for GAC-phenol system. The Freundlich constants had a greater effect than kinetic parameters for the performance of fixedbed adsorption column. FEM solution facilitated prediction of concentration history in solution and within adsorbent particle.

Aqueous phase adsorption of phenols by granular activated carbon was studied in a batch adsorption vessel. Adsorption isotherms of phenol(Ph), p-chlorophenol(PCP) and p-nitrophenol (PNP) from aqueous solution on granular activated carbon have been obtained. The experimental data were analyzed by the surface and pore diffusion models. Both models could be applied to predict the adsorption phenomena. However, the pore diffusion model was slightly better than the surface diffusion model in representing the experimental data for the initial concentration changes. Therefore, the pore diffusion model was used to predict the change of operating variables such as the agitation speed and particle size of adsorbent which have influence on the film resistance and intraparticle diffusion.