콘크리트는 우수하고 뛰어난 내구성에 의해 구조물 건설에 가장 많이 사용되는 재료 중 하나이다. 오늘날 급격한 경제의 발전 및 도시화 등에 의해 오늘날 구조물은 대형화 및 고층화되고 있다. 이에 따라 고강도, 고경량, 고내구 콘크리트 개발에 대한 다양한 연구가 진행되고 있다. 특히 나노소재가 첨 가된 콘크리트는 나노소재에 의해 미세공극이 충진되어 강도 및 내구성이 우수한 것으로 알려져있다. 그러나 기존 나노소재가 적용된 콘크리트는 단위중량이 높아 이를 구조물에 적용시 자중을 증가시키 는 단점이 있다. 이에 본 연구에서는 입자 직경이 10-100 μm이지만 입자 내부의 공극이 있어 단위 중량이 0.6t/m3인 Micro hollow sphere가 잔골재로 사용된 고경량, 고강도 콘크리트의 염화물 침투 특성을 평가하였다. 본 연구에서 사용된 실험변수로써 Micro hollow sphere의 잔골재 치환량(0%, 42%, 100%)가 고려되었으며, 이 시편의 단위중량은 각각 2.37 t/m3, 1.89 t/m3, 1.62 t/m3이다. Micro hollow sphere가 사용된 콘크리트의 염화물 침투 특성은 NT-Build 492 시험을 통해 평가되었다. 실 험결과 Micro hollow sphere 치환율이 0%, 42%, 100%인 실험체의 단위중량은 염화이온 확산계수는 각각 4.45 x10-13 m2/s, 2.57 x10-13 m2/s, 1.4x10-13 m2/s로 Micro hollow sphere 치환량이 증 가함에 따라 염화이온 침투 저항성이 증가하는 것으로 확인되었다. 따라서, Micro hollow sphere를 이용한다면 단위중량이 작으며 내구성이 큰 고경량, 고내구 콘크리트 배합이 가능할 것으로 판단된다.

최근에는 대규모 건축 및 토목 구조물로 인해 건설 부재의 고강도 및 경량화에 대한 요구가 높아지고 있다. 기존의 경량 시멘트 복합체의 경우 단위 체적 중량이 낮아질 수 있으나 강도 저하 문제가 발생한다. 일반적으로 경량화를 위해서는 시멘트 복합체를 배합할 때 일반 경량골재와 고무경량골재, 플라스틱 펠릿 등 다양한 인공 경량골재를 이용한 시멘트 복합체를 혼 합하여 경량화를 확보할 수 있다. 이 중 시멘트 복합체의 인공 경량골재로 플라스틱을 사용하면 상대적으로 골재 자체의 강도를 확보할 수 있지만 재료의 표면 특성으로 인해 시멘트 페이스트에 부착하는데 불리하고 골재로서의 사용이 불리하다. 이에 본 연구에서는 골재로 가장 적합한 플라스틱의 유형을 선택하기 위해 다양한 유형의 플라스틱 시멘트 화합물을 변수로 하여 실험을 진행하였고 실험 결과 플라스틱의 비중이나 표면 재질에 의해서 시멘트 복합체의 물리적 성질이 변화하는 것을 확인할 수 있었다.

In korea, only small amount of nonstructural lightweight concrete is being used through indirect effects such as heat insulation property and soundproofing rather than structural elements due to lack of structural lightweight aggregates and lack of understanding about lightweight concrete development, etc. That`s why structural lightweight concrete to reduce weight has not been put to practical use. This study is a part of high strength lightweight aggregate concrete researches using lightweight aggregates and the purpose of this study is to find out the basic physical characteristics and tension cracking fracture characteristics of lightweight concrete. Crack Mouth Opening Displacement is measured through 3 point flexure experiment about notch beam. Load-CMOD characteristics are examined through rules of countries, characteristics of lightweight concrete and tension cracking fracture experiments. The degree of tensile characteristic alteration according to size changes of specimen and the characteristics about crack surface are analyzed. The changes of softening curve are analyzed and fracture energy is drawn through inverse analysis by the obtained Load-CMOD curve. To decide fracture energy and analysis parametric, inverse analysis is conducted and Ant Colony Method is conducted for optimization and then a way to find out optimal parameterization fracture energy is suggested.

This study is a part of high strength lightweight aggregate concrete researches using lightweight aggregates and the purpose of this study is to find out the basic physical characteristics and tension cracking fracture characteristics of lightweight concrete. Crack Mouth Opening Displacement is measured through three point flexure experiment about embellish notch beam. Load-CMOD characteristics are examined through rules of countries, characteristics of lightweight concrete and tension cracking fracture experiments. The degree of tensile characteristic alteration according to size changes of specimen and the characteristics about crack surface are analyzed. The changes of softening curve are analyzed and fracture energy is drawn through inverse analysis by the obtained Load-CMOD curve. To decide fracture energy and analysis parametric, inverse analysis is conducted and Ant Colony Method is conducted for optimization and then a way to find out optimal parameterization fracture energy is suggested.

대표적인 다상 재료인 콘크리트는 구성 성분의 공간적 분포에 의해 재료 특성이 큰 영향을 받는다. 특히 공극(void)은 콘크리트의 특성에 큰 영향을 주는 요인으로서, 콘크리트 내부에 분포하는 공극의 공간적 분포를 파악하는 것은 재료의 특 성을 이해하는데 매우 중요하다. 본 연구에서는 콘크리트 내부에 존재하는 경량 골재의 공극 분포 분석을 위해서, CT(computed tomography)로부터 얻은 단면 이미지를 활용하여 생성된 3차원 경량 골재 이미지를 활용하여 공극 분포를 시각화(visualization)하였다. 방향에 따른 3차원 경량 골재 내부의 공극 분포 상태를 정성적으로 묘사하기 위해서 확률 분 포 함수인 두점 상관함수(two-point correlation function)를 사용하여 공극의 공간적 분포 경향을 구(sphere)에 표현하였다. 또한 방향에 대한 골재의 강성도(stiffness)를 계산하여 각 방향에 따른 골재의 역학적 물성치 분포 변화를 확인하였다. 각 방향으로의 확률 분포 함수로 표현된 공극 분포와 강성도 분석함으로서 CT 이미지를 통한 공극 분포 특성 분석 및 경량 골재의 역학적 특성을 효과적으로 예측할 수 있음을 확인하였다.

Using the waste(sand wastr and boiler ash) in fluidized bed inciverator, lightweight aggregate concrete was produced and a recycling plan was prepated. The first, the result of the leaching test shows that the waste fluid sand and boiler ash did not exceed the effluent standard. This indicates that there is no harmful effect for recycling. The second, in the lightweight aggregate test using waste fluid sand and boiler ash, the sample that combined cement, waste fluid sand, and sand showed the highest compressive strength, and the mix proportion was 10: 7: 3. Lightweight aggregate concrete that combined cement, waste fluid sand, boiler ash, and sand had a low compressive strength by and large. The third, the same results were identified in the relation between the content of SiO2 and that of Na2O. As the SiO2 content is lowered, the overall viscosity and plasticity of the concrete also decrease, which is not a good condition to form concrete. As for Na2O, as the content increases, the viscosity of the sample and the viscosity of the cement are remarkably lowered, and the strength of the finished concrete is lowered. Therefore, it was concluded that the higher the content of SiO2 and the lower the content of Na2O, the more suitable it is to mix with cement to produce concrete. Fourth, from the fluidized bed incinerator currently operated by company A in city B, a total of 14,188 tons/year were discharged as of 2016, including 8,355 tons/year of bottom ash (including waste fluid sand) and 5,853 tons/year of boiler ash. The cost for landfill bottom ash and boiler ash discharged is 51,000 won/ton, and the total annual landfill cost is 723,588,000 won/ year. Assuming that the landfill tax to be applied from the year 2018 is about 10,000 won/ton, and if there is no reduction in waste disposal charge, an additional landfill tax of 141,880,000 won/year will be imposed. Consequently, the sum total of the annual landfill cost will be 865,468,000 won/year. Therefore, if the entire amount is used for recycling, the annual savings of about 8.7 billion won can be expected.

The flexural strength of lightweight aggregate concrete (LWAC) T-beams reinforced with the minimum amount of longitudinal reinforcement could be conservatively predicted by the conventional procedure using the equivalent stress block specified in concrete code provision.

This study investigated the properties of lightweight foamed concrete by using surfactant and synthetic foaming agent, lightweight aggregate. The effects of foaming agent types and replacing ratio of lightweight aggregate on the compressive strength, density and pore structure of the concrete were investigated. This study showed the improvement of important properties of lightweight foamed concrete. Lower pore distribution and correspondingly higher compressive strength values were reached. Also, synthetic foaming agent had more positive effect on the strength of foamed concrete.

In this study, it is conducted analysis of water absorption of artificial lightweight aggregate using coal ash. For absorption of water, the artificial lightweight aggregate was submerged for 24hours or in conditions of high temperature(100℃) and normal pressure. And it was measured water absorption ration and density( in conditions of oven-dry and saturated surface dry).

In this study, high strength concrete with satuated artificial lightweight aggregate(SLWA) produced by domestic for reducing autogenous shrinkage, which provides additional water to the hydratin cement particles, is applied to be the internal curing. This paper presents the test result of basic property of SLWA and autogenous shrinkage with volumes of SLWA.

Differential scanning calorimetry of the aggregated impregnated with PCM indicates 4～10 J/g of the amount of heat storage capacity. The results show that it is considered that lightweight aggregate concrete impregnated with PCM may have thermal energy storage capacity.

The components of municipal solid waste incineration bottom ash produced over 3 million ton every year are similarto the components of geological features, therefore it is suitable to be used as the raw materials of lightweight aggregate.Development of lightweight aggregate using this bottom ash will be helpful to solve landfill and environmental problems.Lightweight aggregate was developed at 1,110oC by using clay, kaolin, bentonite and silica as the raw material to 50%of municipal solid waste incineration bottom ash. Silicon carbide (SiC) was used as a blowing agent. Optimal mixingratio is bottom ash 50%, kaolin 22%, clay 22%, bentonite 6% and blowing agent 0.1%. As the result of quality test,produced lightweight aggregate met the all appraisal standards. The result of heavy metal leaching test was much lowerthan the elution reference value of ceramic manufactures made by using bottom ash.

In this study, trying to applying in structure and slab and wall of technical of near-surface transit system, we would make precast concrete for constructing rapidly to diversify subject about lightweight concrete. for this purpose, we experimented lightweight aggregate centrally expected to be applied in this research and would like to suggest fundamental data for manufacturing products as a level of 30, 50MPa precast concrete.

Based on Measurement of the dynamic Modulus of Elasticity Lightweight Aggregate Concrete using USPV. Depending on the materials used absolute difference in dynamic modulus of elasticity was verified, but increasing load was caused Ultrasonic velocities increase, and accordingly the relative value increase in dynamic modulus of elasticity identical trend was confirmed.

The energy consumption by buildings approximately reaches 25% of total korea energy consumption. The greatest part in the buildings of the energy consumption is building facade. but a few research projects on concrete comprising more than 70% of outsider of buildings has been tried. This research structural insulation concrete what improved insulation performance using micro form admixture and lightweight aggregate.

Recently, it is requests the reduction of self-load at structure and the cross section reduction due to the trend of making higher, larger of buildings. But The experiment of Lightweight concrete is mostly implemented in Laboratory and is rarely implemented in patch plant for application of construction site. therefore, this study will be useful at base, when the lightweight aggregate concrete is applied to construction site. so We had a comparative experiment of physical performance with in laboratory and Batch plant for lightweight aggregate concrete.

This is a development of testing method of pressurized absorption for prediction and evaluation on the pumpability about lightweight aggregate concrete. For this testing method, we device pressure vessel, plug, and process of experiment. As the results of experiment with hollow sphere, we found a equation on the load-displacement.

To evaluate the strength properties of concrete using low-absorption lightweight aggregate, this paper was compared low-absorption and foreign-made lightweight aggregate by test of slump, air content, elapsed time of slump, compressive and tensile strength.

본 연구에서는 철근콘크리트 슬래브의 내부식성과 경량화를 도모하기 위하여 GFRP bar를 휨보강근으로 사용하는 경량골재콘크리트 슬래브를 고려하고 이 구조물에 대하여 기초적인 거동을 조사하였다. 경량콘크리트의 압축강도 및 인장강도 그리고 콘크리트 파괴에너지 측정, 일련의 슬래브 휨실험, 비선형유한요소해석을 통한 수치해석, 휨실험과 수치해석의 결과비교 등이 행하여졌다. 그 결과, GFRP bar를 휨보강근으로 사용한 경량콘크리트 슬래브는 기준시험체로 사용된 동일 규격의 철근콘크리트 슬래브에 비하여 무게를 28%정도 감소시킬 수 있었지만 파괴하중은 36%정도 감소되었다. 이는 GFRP bar의 낮은 축강성과 경량콘크리트의 낮은 부착강도 때문인 것으로 판단된다. 그리고 경량콘크리트의 부착력 감소 특성을 고려하기 위하여 GFRP bar와 콘크리트 경계면 사이에 계면요소를 사용한 수치해석 결과는 계면요소의 사용이 실험결과에 더 근접해갈 수 있는 방법임을 보여주었다.

최근 구조물들이 대형화됨으로써 보통 콘크리트를 사용할 경우 강도 및 내구성에 비하여 중량이 크다는 결점으로 인해 콘크리트 구조물의 설계 및 시공의 안정에 제약을 주게 된다. 이러한 결점을 개선하기 위해서는 자중이 작고 강도가 큰 경량콘크리트가 요구되나, 국내에서는 실용화를 위한 연구가 아직 미비한 실정에 있다. 일반적으로 고온에서 소성시켜 제조된 인공골재는 골재가 팽창되어 내부에 무수한 기포를 가지게 된다. 따라서 골재의 크기에 따라 이들의 기포가 경량콘크리트 비중과 강도에 미치는 영향 연구가 필요하다. 본 연구에서는 국내에서 개발된 화력발전소 폐기물과 점토를 고온에서 소성, 팽창시켜 만든 인공경량골재의 입도별 배합설계를 실시하고 실험을 통하여 경량콘크리트의 비중 및 강도변화를 비교 고찰했다. 또한 경량콘크리트의 고강도 발현을 위한 인공경량골재의 최적 입도비를 제안하였다.