Experiments were conducted to propose manufacturing methods to make loess ball using food wastes. Food wastes were used to improve porosity and increase specific surface area of loess ball. Red clay, food wastes and clay were used as main raw materials in making loess ball and these were mixed with varying ratio in order to find out optimum mixing ratio. The optimum mixing ratio of food wastes is evaluated to amount to 30%. In this case, 33.61 kg/cm2 of compressive strength, 65.13% of porosity, 50.04% of absorbing ratio, and 6.302 m2/g of specific surface area are obtained. When evaluating cross section and the appearance of red clay ball made up of 30% food wastes through a visual inspection and SEM photograph, it can be observed that a lot of pores are formed across the red clay ball due to the volatilization of moisture and organic matter in food wastes during the high-temperature burning. Taking into account compressive strength, porosity, absorbing ratio, specific surface area, and SEM photograph altogether, the optimum mixing ratio of loess, food wastes, and clay in the loess ball were 30%, 50%, and 20%, respectively. When evaluating the cross-section and outer appearance of the loess ball that comprise 30% of food wastes by SEM photography, it can be concluded that the optimum mixing ratio of loess, food wastes, and clay in the loess ball amounts to 30%, 50%, and 20%, respectively. Compressive strength of the manufactured loess ball amounts to 42.52 kg/cm2, which is 26.5% higher than the values obtained in the condition when the loess ball made without food wastes. However, the values of porosity, absorbing ratio, and specific surface area are somewhat lower than the corresponding values obtained in the condition when the loess ball was manufactured without food wastes.

In this study, the authors applied a modified SRF product quality based on a mix of disposable plastic bags and bulky waste to estimate the mixing ratio which can be the energy efficiency of coal for fuel. This study was performed to find physical properties of bulky wasteand element analysis for the mixd disposable plastic bag. Also, SRF (solid recovery fuel) was tested to figure out, physicochemical properties by standard method. As the results, the physical properties of bulky waste shows 89.6% of wood. Then the author measured disposal plastic bag as follows : [3 : 7], [5 : 5], [7 : 3] quality criteria by the mixing ratio of bulky waste. The low calorific value was proportionally increased whenever the mixing ratio of disposable plastic bag was increased. Therefore, the author can surmise that the mixing ratio between bulky waste and disposable plastic bag was [6 : 4]. It shows 5,950 kcal / kg value as much as coal fuel.

유용 양조용 효모를 선정하기 위해, 효모의 알코올 생성능을 조사한 결과, Y268 효모가 알코올 생성능이 가장 높았으며 그 중, 0.3% 접종한 효모를 최종 선정하여 사용하였다. 2종류의 양조용 곰팡이(A. luchuensis 34-1, Lich. ramose CN042)와 2종류의 쌀 품종(추청미, 한아름)으로 제조한 4종류 쌀누룩의 특성을 분석한 결과, 쌀 품종에 관계없이 A. luchuensis 34-1 균주의 이화학적 특성이 우수하였고, 균주별 및 쌀 품종별로 제조된 4종류 누룩의 유기산과 유리아미노산을 분석한 결과에서 주요 유기산은 citric acid와 malic acid로 분석되었다. 유리 아미노산은 각각 25~28개로 구성되어 있으며, 균주별과 쌀 품종별에 따라 차이를 보였다. 균주별로 제조한 쌀누룩의 배합비율을 달리하여 4가지 조합(A. luchuensis 34-1: Lich. ramose CN042=1:0, 0:1, 1:1, 1:3)과 2종류 쌀 품종으로 빚은 탁주의 발효기간에 따른 특성을 분석한 결과, 누룩의 배합비율과 쌀 품종에 따라 이화학적 특성 차이를 보였고, 알코올 함량은 발효 6일째 16%로 가장 높았다. 제조한 탁주의 유기산과 유리 아미노산 분석 결과, 전체 7종류 이상의 유기산이 검출되었으며, 주요 유리 아미노산은 arginine, citrulline이었고, 누룩의 배합비율과 쌀 품종에 따라 차이가 있었다. 탁주의 관능특성을 비교한 결과, 전반적인 기호도는A. luchuensis 34-1 누룩의 함량이 높을수록 높은 기호도를 보였고, 누룩 배합비율별로 비교했을 때는 쌀 품종에 관계없이 1:1 비율로 제조한 탁주가, 쌀 품종별로 비교했을 때는 한아름으로 제조한 탁주의 선호도가 더 우수한 것으로 나타났다.

In this study, the hydration characteristics in winter of low heat concrete with respect to the binder type are investigated experimentally. According to the research results, TBC1(Ternary Blended Cement) applied low heat concrete, the heat of hydration was found to be reduced and the 28 days compressive strength was superior to that of other TBC mixes.

Concrete shrinkage is happened due to the cement hydration and water evaporation from early ages, and it induces crack of concrete. In this study, the crack resistance of remicon latex-modified concrete was compared with latex and admixture ratio. From the results, if admixture ratio is constant, cracking is delayed when the latex ratio is increased.

In this study, wheat doenjang was manufactured using Korean wheat meju and soybean meju, and its quality were investigated according to mixing ratio of meju. The general characteristics such as moisture contents, pH and salinity of wheat doenjang, which is fermented and aged at 25℃ for 70 days, were slightly decreased time dependently as similar pattern. The pH of wheat doenjang ranged from 4.95 to 5.11% and generally ecreased with aging. The moisture contents was 54.5~57.5%, and there was no significant differences in the aging period. Also, there was no significant changes in the salt contents. The amino-type nitrogen contents were 376.27~600.91 mg% at day 70 of the aging period, and showed 3 fold change compared to the initial contents. The reducing sugar contents showed significant difference between the samples, and repeated fluctuation in the aging period. Wheat meju sample A, which contains 50% of soybean meju, showed the highest antioxidation ability. In addition, wheat meju sample A showed the highest score in the sensory evaluation of the colour, taste, flavor, and overall acceptability. Therefore, wheat doenjang manufacturing at a 1:1 of mixing ratio will lead to desirable quality of wheat doenjang.

Many researches are conducted to reduce latex content because latex is expensive. In these study, the durability of concrete containing extra admixture was compared with latex mixing ratio. From the results, when latex content was increased, bending strength and bonding strength were increased. However, the compressive strength, relative dynamic young’s modulus and the amount of passing charge did not show a noticeable difference with latex ratio. And, the peak of micro-pores was changed from 100nm to 50nm

This study aims to develop solidifying agents of sewage sludge using industrial By-Products and evaluate applicability of the solidified sewage sludge. The result of this study shows that it was possible to reduce water content of the cover materials to more than 50% in a short time as a result of the excellent hygroscopic function of inorganic binder made from industrial by-products and the granulation of sludge. The result suggests that the appropriate mixed ratio of (PSA + CPA) − (GBFS + SM1) − (SAS + SM2) is 60-25-15, and input ratio of solidifying agent is 48%, considering the applicability of the facilities, including mixing performance and availability of discharge, as well as the percentage of moisture content of the solidified sewage sludge, pH, and exothermic temperature. The solidified sewage sludge made using industrial by-products met more than the standard of unconfined compressive strength 0.5 kg/cm2 (as for cover materials 0.1 MPa) in 7 days due to ground granulated blast furnace slag, high-calcium fly ash, and SAS. As a result, valid resource recovery is possible through the land treatment of sewage sludge by inducing in-situ stabilization of heavy metals and property strengths through the reactivity of industrial by-products.

The physiochemical characteristics and sensory properties of the Samgyetang herb to which different dried medicinal herbs were added were investigated to find the best formulation for the product. For the Samgyetang herbal product, Schizandra chinensis, Atractylodes lancea, Glycyrrhiza uralensis, and Zizyphus jujube were used at a fixed ratio in the formulation, and Paeonia lactiflora (PL), Codonopsis lanceolata (CL), and Scutellaria baicalensis (SB) were added, with different amounts. The pH of Samgyetang increased along with the SB amount, and the soluble-solid content increased along with the CL amount. S7, which had the highest SB addition level, had the highest L value, and the b values were the highest in S7, which had the highest SB addition level. In the sensory evaluation, S7, which had the highest amount of SB, had the highest score in flavor, taste, and overall acceptability. In conclusion, the best formulation for Samgyetang would include PL 8 g, CL 4 g, SB 12 g, Schizandra chinensis 6 g, Atractylodes lancea 4 g, Glycyrrhiza uralensis 2 g, and Zizyphus jujube 4 g.

가공이나 저장 중 쉽게 산화되는 특성을 갖는 비타민 C의 안정성과 가공적성을 향상시키고자 Zein-DP와 HPMC-FCC를 코팅제로 한 유동층 코팅법을 이용하여 코팅한 비타민 C 분말의 품질 특성에 대하여 조사하였다. 유동층 코팅은 비타민 C의 입자크기()와 코팅액의 혼합비(1:1.6, 1:2.5, 1:3(w/w))를 달리하여 실시하였다. 코팅효율은 의 경우가 보다 높았고 코팅액의 혼합량이 많을수록 감소함을 보였다. 코팅된 필름의 두께는 의 경

연구는 알칼리 활성시멘트(Alkali Activated Cement)를 콘크리트에 활용하기 위한 기초적인 연구로서 잔골재 및 굵은골재의 혼합비는 일정하게 하고, 활성화제/플라이 애쉬의 혼합비, 그리고 활성화제 중 물유리, 수산화나트륨, 물의 혼합비를 변화시킨 AAC 콘크리트에 대한 압축강도를 측정하였다. 또한 각 변수에 따른 압축강도의 특성을 분석하고, AAC 콘크리트의 최적 혼합비를 구하였다. 그 결과 최대 압축강도 발현을 위한 활성화제 중 물유리, 수산화나트륨, 물의 최적 혼합비는 4.0:1.0:2.5 이었으며, 활성화제/플라이 애쉬의 최적 혼합비는 0.7 이었다

천마 재배에서 차광방법 개발과 접종목 재활용의 가능성을 검정하여 저 비용, 고 생산의 재배법을 확립하기 위한 실험을 수행하였다. 비가림을 하지 않은 노지재배에서는 종마의 수량이 성마의 수량 보다 높았다. 차광 방법에 따른 천마의 수량은 95% 차광망 1겹, 2겹 및 무차광순 이었으며, 접종목 혼용에 따른 천마의 수량은 생목만 사용하였을 경우에 가장 높았고, 다음으로는 생목과 재활용목을 2:1로 및 1:1 혼용처리 처리 순이었다. 접종목 혼용에 따른 수익성 비교에서 95% 차광막 1겹 처리시 생목과 재생목을 2:1로 혼용한 경우는 생목만 사용한 경우 수익의 81%이었다. 재배법 개선을 통해 수량성을 높일 수 있다면 생목과 재생목을 적당한 비율로 섞어 재배할 경우 비용 절감과 환경보호 차원에서 유용한 방법으로 사료된다.

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity than those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 ㎏ to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.