본 연구는 해양에서 선박 운항 시 발생할 수 있는 항행장애물, 특히 부유물과의 충돌 위험성을 예측하기 위해 몬테카를로 시뮬 레이션을 적용한 항행안전 충돌 확률 모델을 개발하는 데 중점을 두고 있다. 항행장애물은 해양에서 선박의 운항을 방해하거나 위험을 초 래할 수 있는 물체로, 선박 사고의 주요 원인 중 하나이다. 연구는 부유물 감김 사고와 관련된 최근 5년간의 해양사고통계 정보와 7년간 사 고 데이터를 분석하여 사고 발생 패턴을 파악하고, 이를 기반으로 위험성 평가 방법론을 검토하였다. 몬테카를로 시뮬레이션을 통해 임의 의 제한된 해상 공간 내에서 표류하는 부유물과 이동 중인 선박이 접촉할 확률을 도출하였으며, 다양한 변수(부유물의 크기, 개수, 속도, 이 동하는 선박의 개수, 선박의 통항 패턴 등)가 충돌 확률에 미치는 영향을 분석하였다. 연구 결과, 표류하는 장애물의 속도보다는 장애물의 크기와 이동하는 선박의 개수에 따라 충돌 확률이 영향을 받음을 확인할 수 있었다. 이 연구는 해양과 선박 데이터 기반 실행 가능한 모델 을 제안하며, 이를 통해 선박 운항의 안전성을 높이고, 사고 예방을 위한 효과적인 관리 방안을 제공하는 것을 목표로 하고 있다.
층상 반무한체에서의 확률론적 완전파형역산을 위한 Markov chain Monte Carlo (MCMC) 모사 기법을 정식화한다. Thin-layer method를 사용하여 조화 수직 하중이 작용하는 층상 반무한체의 지표면에서 추정된 동적 응답과 관측 데이터와의 차이 및 모델 변수 의 사전 정보와의 차이를 최소화하도록 목적함수와 모델 변수의 사후 확률밀도함수를 정의한다. 목적함수의 기울기에 기반하여 MCMC 표본을 제안하기 위한 분포함수와 이를 수락 또는 거절할지 결정하는 수락함수를 결정한다. 기본 진동모드 뿐만이 아니라 고 차 진동모드가 우세한 경우를 포함하여 다양한 층상 반무한체의 전단파 속도 추정에 제안된 MCMC 모사 기법을 적용하고 그 정확성 을 검증한다. 제안된 확률론적 완전파형역산을 위한 MCMC 모사 기법은 층상 반무한체의 전단파 속도와 같은 재료 특성의 확률적 특 성을 추정하는 데 적합함을 확인할 수 있다.
Dynamic modulus of Asphalt Concrete (|E*|) is one of the most important input parameters is used to design pavement structure according to mechanical-empirical Pavement design of the United State of America. Because of its importance, there has been a lot of research on predictive models of (|E*|) as well as sensitive analysis of input parameters influences dynamic modulus in order to find out which one is the most influence on (|E*|), basing on that, the most reasonable quality control and quality assurance can be applied to ensure quality of work is under control. This paper presents sensitive analysis of input parameters influence (|E*|) of dense asphalt concrete in Viet Nam according to some predictive models of dynamic modulus of the United State of America by applying Monte Carlo simulation method.
콘크리트 혼화제의 무수축 그라우트에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대 한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(μs, μa, μt)에 의해 조사 되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛 분포에 의한 결과는 광원에서 검출기 까지 거리가 가까우면 무수축혼화제의 산란이 증가하여 산란세기가 크게 나타나는데 혼화제가 첨가함에 따라 무수축 성질이 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자 인하는데 도움이 될 것이다.
본 연구에서는 강풍 위험 모델과 강풍 취약도 모델을 개발하여 옥외 광고물의 강풍 위험도를 정량적으로 평가하였다. 강풍 위험 모델과 강풍 취약도 모델 모두 확률론적 접근법인 몬테카를로 모사 모형을 적용하여 개발되었으며, 강풍 위험도 모델은 평가된 강풍 위험과 강풍 취약도의 수학적 계산을 통해서 평가되었다. 강풍 위험은 국내 내륙과 해안지역의 대도시인 서울과 부산 지역에 대하여 평가되었으며, 강풍 취약도 모델은 현장 조사와 문헌 조사를 통하여 파악된 10종의 벽면 이용형, 8종의 돌출형 옥외 광고물을 대상으로 개발되었다. 강풍 위험도에 영향을 미치는 요인을 파악하기 위하여 지표조도구분, 옥외 광고물의 형태, 설치 지역, 설치 높이 등에 따른 강풍 위험도를 정량적으로 평가하였다. 본 연구에서 제안한 강풍 위험도 평가 방법은 강풍으로 인한 옥외 광고물의 손실 추정 및 피해 저감 대책 수립을 위하여 활용될 수 있을 것으로 판단된다.
Structural dynamic system involves random variables conditions such as material property, geometric parameters and applied loads. This uncertainties result from the structural parameter are carefully considered the dynamic structural response in displacement, stress, and natural frequencies. The random vibrational system must be designed to withstand a certain amount of the fluctuation with respect to the uncertainties. Harmonic response of a spring-mass system is mathematically modelled with the probabilistic finite element method using the Monte Carlo simulation. The aim of this paper is to find the optimal lowest frequency for the spring-mass system with random input variables and response parameters to the displacements. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical optimal design evaluation method is proposed for the design of the harmonic system. The numerical results are obtained where the next highest frequency of the system and displacements treated as constraints.
국내 서해대교, 인천대교와 같은 장대교량은 대부분 빈번하게 태풍에 의해 영향을 받는 해안에 위치하였으며, 교량의 길이가 긴 만큼 풍하중에 의한 영향이 다른 하중에 비해 상대적으로 크기 때문에 내풍 안정성을 확보하기 위해 정확한 설계풍속을 산정하는 것이 매우 중요하다. 본 연구에서는 태풍의 기후학적 특성 인자로 중심기압깊이, 태풍이동속도, 태풍이동방향, 최단접근거리를 결정하였으며, 태풍의 기후학적 특성들의 확률 분포를 추정하고, 바람장 모형과 중심기압상승 모형을 적용하여 몬테카를로 시뮬레이션을 실시하였다. 분석결과, 대체적으로 제주도와 남해안 지역의 재현기간 풍속이 크게 나오며 고위도로 갈수록 작아지는 특징을 나타냈다. 이와 같은 특징이 나타난 가장 큰 원인은 고위도 분석지점 표본 태풍의 중심기압이 저위도 분석지점 표본 태풍의 중심기압보다 높기 때문으로 판단되며, 또한 우리나라에 해상에서 육지로 이동하면서 쇠퇴기를 겪어 점차 약해지기 때문인 것으로 분석되었다. 또한, 시뮬레이션 결과를 도로교 설계기준 100년 재현기간 풍속(10분 평균, 지상 10m, 지표조도 II)과 비교한 결과, 태풍시뮬레이션의 결과가 낮게 나타났으며, 이러한 점을 볼 때 도로교 설계기준의 기본 풍속이 높게 산정되어 있다고 판단되며, 기상자료 분석과 같은 추가적인 연구를 통해 기본풍속 조정에 대한 연구가 수행 되어야 할 것으로 사료된다.
In this paper, the numerical results concerning different orbits of a 3D axisymmetric non-rotating galactic potential are presented. We use Paczynski's gravitational potential with different birth velocity distributions for the isolated old Neutron Star (NS) population. We note some smooth non-constant segments corresponding to regular orbits as well as the characterization of their chaoticity. This is strongly related to the effect of different kick velocities due to supernovae mass-loss and natal kicks to the newly- formed NS. We further confirm that the dynamical motion of the isolated old NSs in the gravitational field becomes obvious, with some significant diffraction in the symmetry of their orbital characteristics.
Structural system involves random conditions such as material property, geometric parameters and applied loads. This is caused by either measurement inaccuracy or system complexity and must be designed to withstand the uncertainties, Random structures may be modelled by using the finite element method using Monte Carlo simulation. It can be applied easily to any structural system with random parameters. The aim of this paper is to find the shape optimal design for the cantilever beam with random input variables to the height and response parameters to the displacement and stresses. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical shape optimal design evaluation method is proposed for the design of the cantilever beam shape. The numerical results are obtained where total volume of the beam, stresses and displacements in the beam treated as constraints
The influences of scatterer and absorber in turbid material by light scattering on silica fume of additive were interpreted for the scattered intensity and wavelength. The molecular properties have been studied by Monte Carlo simulation in resin of New Austria Tunnel Method. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(μs, μa ,μt). Monte Carlo Simulation method for modelling of light transport in the civil engineering and construction field was applied. The results using a phantom were discussed that the distance from source to detector is closer, and scattering intensity is stronger with those obtained through Monte Carlo Simulation. It may also aid in designing the best model for coatings and corrosion for the durability of metal constructions.
혼탁매질에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(μs, μa, μt)에 의해 조사되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛분포에 의한 결과는 광원에서 검출기까지 거리가 가까우면 산란이 증가하여 산란세기가 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자인하는데 도움이 될 것이다.
We present a Monte-Carlo simulation code, which solves the problem of dust-scattering in interstellar dust clouds with arbitrary light source distribution and dust density structure, and calculate the surface brightness distribution. The method is very flexible and can be applied to radiative transfer problems occurring not only in a single dust cloud, but also in extragalactic dust environment. We compare, for performance test, the result of Monte-Carlo simulation with the well-known analytic approximation for a spherically symmetric homogeneous cloud. We find that the Code approximation gives a very accurate result.
본 연구는 식중독을 일으킬 수 있는 황색포도상구균(Staphylococcus aureus)의 검출을 이용하여 일식당의 식자재, 조리공정, 조리 기구, 조리 종사자의 오염수준을 예측하고 오염에 영향을 미치는 인자를 확인하고자 하였다. 시료는 서울시에 위치한 일식당에서 초밥과 생선회를 수거하였다. 몬테카를로 시뮬레이션을 통해 초기 오염수준으로부터 각 공정별 위해 인자를 고려하여 최종오염수준을 예측한 결과, 새우 및 문어초밥의 경우, 모든 초밥이 저장기간 동안 S. aureus가 증식되는 것으로 나타났으며 특히, 문어초밥이 가장 높은 오염도를 보였다. 이는 생선회가 온도변화에 따른 균의 증식이 활발하고, 일식당에서 초밥을 섭취하기 직전에 초밥 중 생선회의 급속한 온도 변화가 나타나기 때문으로 판단된다. 초밥의 민감도 분석 결과, 완성된 초밥의 섭취 시 온도의 민감도 값이 0.419로 최종오염수준을 증가시키는 것으로 예측되었다. 두 종류의 초밥에서 동일하게 보관 시간과 섭취 시의 온도가 최종 오염수준에 가장 크게 영향을 주는 것으로 나타났다. 이는 일정 시간이 지난 후 초밥을 섭취하는 것이 균의 농도 증가에 가장 크게 영향을 미친다는 것으로 초밥을 조리 후 즉시 섭취하는 것이 균의 증식을 크게 예방할 수 있음을 알 수 있다. 연어, 도미, 방어회의 경우 섭취 시간에서 민감도 값이 0.71로 가장 큰 민감도를 나타내었고, 섭취 시 온도 또한 민감도가 크게 나타났다. 초밥의 시나리오 분석 결과, 실온 보관 시, 섭취시간이 2시간 이내일 때 식중독을 유발하지 않는 안전한 수준임을 알 수 있었다.
In this study, occurrence of aflatoxin M₁ (AFM₁) in domestic milk and milk products was determined. The level of AFM₁ in market milk (0.047 ppb) was lower than that in raw milk (0.083 ppb) but this looks like that is due to dilution in collecting process rather than the effect of sterilization. In the case of nonfat dry milk, level of AFM₁ appeared high by 0.24 ppb but it is thought to be not different from market milk actually because nonfat dry milk is diluted at intake. In the case of ice cream, finished products were contaminated with AFM₁ of 0.020 ppb and also have the possibility of the contamination of AFB₁ due to secondary raw material such as nuts and alinond. On the basis of the results of this study and previous studies, Monte-Carlo simulation is conducted to estimate the contamination level of AFM₁ in domestic market milk. To consider uncertainty and variability fitting procedure was passed through. And we used beta distribution to estimate the prevalence and triangular distribution to estimate the concentration level of AFM₁ in milk. As a result, the 5%, 50% and 95% points of the distribution of the probability of AFM₁ contamination level in milk is 0.0214, 0.0946 and 0.1888 ppb, respectively. Also we estimate that AFM₁ in almost milk was low more than 0.5 ppb that is American acceptable level but 80.4% exceeded far 0.05 ppb that is European standard.
The propagation of light radiation in a turbid medium is an important problem that confronts dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. Scattered light is measured as a function of the position(distance r, depth z) between the axis of the incident beam and the detection spot. Turbid sample yields a very forward-directed scattering pattern at short range of position from source to detector, whereas the thicker samples greatly attenuated the on-axis intensity at long range of position. The portions of scattered light reflected from or transmitted throughphantom depend upon internal reflectance and absorption properties of the phantom. Monte Carlo simulation method for modelling light transport in tissue is applied. It uses the photon is moved a distance where it may be scattered, absorbed, propagated, internally reflected, or transmitted out of tissue. The photon is repeatedly moved until it either escape from or is absorbed by the phantom. In order to obtain an optimum therapeutic ratio in phantom material, optimum control the light energy fluence rate is essential. This study is to discuss the physical mechanisms determining the actual light dose in phantom. Permitting a qualitative understanding of the measurements. It may also aid in designing the best model for laser medicine and application of medical engineering.