전 세계적으로 지하도로의 건설이 활발히 이루어지고 있지만, 지하도로에서의 운전자 행태에 대한 연구는 여전히 부족한 실정이다. 또한 현재 지하도로 설계기준은 주로 지상도로나 터널 기준을 준용하고 있어, 지하 특유의 환경적 요인을 충분히 반영하지 못하고 있 다. 이에 따라, 지하도로에서의 운전자 행태를 분석하고 이를 반영한 설계기준 마련이 필요하다. 본 연구는 지하도로에서 운전자가 차로 변경을 어떻게 수행하는지 분석하고, 정보 제공 방식이 운전자 행태에 미치는 영향을 평가 하는 것을 목적으로 한다. 이를 통해, 향후 지하도로 설계 및 운영에 필요한 개선 사항을 제안하고자 하였다. 이를 위해 본 연구에서 는 소형차 전용도로의 설계 재원을 기준으로한 VR 기반 주행시뮬레이터 맵을 구성하였고 34명의 피실험자를 모집하여 주행시뮬레이 터 실험을 수행하였다. 첫 번째로 차로변경 행태를 살펴보기 위하여 현행 차로 변경 허용 구간 기준인 400m와 대안으로 차로 변경 허용 구간 2km로 비교하 여 운전자의 차로변경 행태에 대해 분석을 수행하였다. 두 번째로는 현행 정보제공 체계 기준인 분기전 2km, 1km, 150m 전 정보안내 대안과 대안으로 추가 500m 지점에 정보를 제공하는 방안에 대해 주행시뮬레이터 실험을 수행하고 대안별 효과를 비교하였다. 실험결과를 검토한 결과, 지상 도로보다 지하 도로에서 운전자들은 차로 변경을 더 어려워하는 경향이 있었다. 두 번째로 운전자들은 차로 변경 허용구간에 따른 주행패턴의 유의미한 변화는 존재하지 않는 것으로 나타났으며, 평소의 주행 습관에 따라 차로 변경을 하 는 것으로 나타났다. 세 번째로는 정보 제공 횟수를 늘릴 경우 운전자들은 차로 변경과 진출 지점을 더 빨리 결정하며, 차로 변경 지 점의 분포가 작아지는 현상이 관찰되었다. 이는 많은 운전자들이 비슷한 지점에서 차로 변경을 하게 되어 상충 구간이 줄어들고, 그에 따라 교통 안전성이 증가할 수 있음을 의미한다.

PURPOSES : This study investigates the effects of three different three-color arrow traffic light operations on right-turn vehicles at intersections in Busan Metropolitan City. METHODS : Intersections in this study were categorized as general intersections (Type 1), intersections with right-turn pockets (Type 2), and intersections with scramble crosswalks (Type 3), and were investigated in terms of the efficiency (i.e., control delay) and safety (i.e., number of conflicts) of right-turn vehicles by employing VISSIM 2023 and SSAM3. RESULTS : From a mobility perspective (i.e., control delay), the protected/permitted operation outperformed the other two methods at the three types of intersections. The protected operation, similar to the results of the protected/permitted operation, was also superior to the permitted operation in terms of safety (i.e., number of conflicts). CONCLUSIONS : Protected/permitted operation has been proven to be a more efficient and safer measure than other operation methods for alleviating the problems of protected right-turn operation, which is currently implemented without three-color arrow traffic lights.

The objectives of this study is to classify evacuation types, derive the characteristics of 4 types, develop and discover evacuation routes within the performance hall space, and present the statistical classification results of the evacuation classification model by classification type. To achieve this purpose, the characteristics of each evacuation type's four types are applied through a network reliability analysis method and utilized for institutional improvement and policy. This study applies for the building law, evacuation and relief safety standards when establishing a performance hall safety management plan, and reflects it in safety-related laws, safety standards, and policy systems. Statistical data by evacuation type were analyzed, and measurement characteristics were compared and analyzed by evacuation types. Evaluate the morphological similarity and reliability of evacuation types according to door width and passage length and propose the install position of evacuation guidance sign boards. The results of this study are expected to be used as basic data to provide operation strategies for safety facility evacuation information sign boards according to evacuation route classification types when taking a safety management plan. The operation strategy for the evacuation sign boards installation that integrates employee guidance and safety training is applied to the performance hall safety management plan. It will contribute to establishing an operational strategy for performance space safety when constructing performance facilities in the future.

곧 다가올 미래에는 자율운항선박, 육상 원격제어센터에서 제어되는 선박, 그리고 항해사가 탑승하여 운항하는 선박이 함 께 공존하며 해상을 운항할 것이며, 이러한 상황이 도래했을 때 해상 교통 환경의 안전을 평가할 수 있는 방법이 필요할 것으로 사료 된다. 이에 본 연구에서는 자율운항기술을 사용하여 항해사가 직접 조종하는 선박과 자율운항선박이 공존하는 해상환경 하에서 선박 조종시뮬레이션을 통해 통항 안전성을 평가하기 위한 방안을 제시하였다. 자선은 6-자유도 운동 기반의 MMG 모델을 심층 강화학습 기법 중 하나인 PPO 알고리즘으로 학습하여 자율운항 기능을 갖출 수 있도록 설계하였다. 타선은 평가 대상 해역의 해상 교통 모델 링 자료로부터 선박이 생성되도록 하였고, 기 학습된 선박모델을 기반으로 자율운항 기능을 구현되도록 하였다. 그리고 해양기상 자 료 데이터베이스로부터 조위, 파랑, 조류, 바람에 대한 자료를 수집하여 수치 모델을 수립하고 이를 기반으로 해양기상 모델을 생성하 여 시뮬레이터 상에서 해양 기상이 재현되도록 설계하였다. 마지막으로 안전성 평가는 기존의 평가 방법을 그대로 유지하되, 선박조 종시뮬레이션에서 해상교통류 시뮬레이션을 통한 충돌 위험성 평가가 가능하도록 하는 시스템을 제안하였다.

Working with molten metal has always been and will always be a dangerous workplace. No matter how carefully equipment is designed, workers are trained and procedures are followed, the possibility of an accident can occur in melting workplace. Some primary causes of melt splash and furnace eruptions include wet or damp charge material, dropping heavy charge into a molten bath, wet or damp tools or additives and sealed scrap or centrifugally cast scrap rolls. Induction melting brings together three things (water, molted metal and electricity) that have the potential for concern if the furnace is not properly working. Induction furnace must have a water cooling system built into the coil itself. Water picks up the heat caused by the current as well as heat conducted from the metal through the refractory. The water carries the heat to a heat exchange for removal. Spill pits serve to contain any molten metal spilled as a result of accident, run out or dumping of the furnace in an emergency. If a leak is suspected at any time, cease operation and clear the melt deck area of all personnel and empty the furnace. Molten metal fins can penetrate worn or damaged refractory and come into contact with the coil. A furnace or a close capture hood which suddenly swings down from a tilted position will cause injury or death. Whenever workers are working on a furnace or close capture hood when it is in the tilted position, be sure that it is supported with a structural brace that is strong enough to keep it from dropping if hydraulic pressure is lost. In theory refractory wear should be uniform, however, in practice this never occurs. The most causes of lining failure are improper installation of refractory material, inadequate sintering of refractory material, failure to monitor and record normal lining wear, allowing the lining to become too thin, installation of the wrong refractory, improper preheating of a used cold lining, failure to properly maintain the furnace the sudden or cumulative effects of physical shocks or mechanical stress, and excessive slag or dross buildup. Pouring cradles provide bottom support for crucibles. A crack in the crucible occur below the bottom ring support, the bottom of the crucible can drop and molten metal will spill and splash, possibly causing serious injury or death. To reduce this danger, a pouring cradle that provides bottom support for the crucible must be used. Power supply units must have safety locks and interlocks on all doors and access panels. Workers who work with low voltage devices must be made aware of the risk posed by high levels of voltage and current. The most causes of accidents are introduction of wet or damp material, improper attention to charging, failure to stand behind safety lines, coming into contact with electrically charged components and lack of operator skills and training. Only trained and qualified personnel are to have access to high risk areas. Safety lockout systems are another effective measure to prevent electrical shock

In order to solve the rapidly increasing domestic delivery volume and various problems in the recent metropolitan area, domestic researchers are conducting research on the development of “Urban Logistics System Using Underground Space” using existing urban railway facilities in the city. Safety analysis and scenario analysis should be performed for the safe system design of the new concept logistics system, but the scenario analysis techniques performed in previous studies so far do not have standards and are defined differently depending on the domain, subject, or purpose. In addition, it is necessary to improve the difficulty of clearly defining the control structure and the omission of UCA in the existing STPA safety analysis. In this study, an improved scenario table is proposed for the AGV horizontal transport device, which is a key equipment of an urban logistics system using underground space, and a process model is proposed by linking systematic STPA safety analysis and scenario analysis, and UCA and Control Structure Guidelines are provided to create a safety analysis.

PURPOSES : This study establishes a methodology for evaluating traffic safety in response to the introduction of one-way traffic using surrogate safety measures and analyzes the impact of one-way traffic safety through a case analysis. METHODS : The SSAM(Surrogate Safety Assessment Measure) was used to analyze traffic conflicts (TTC(Time to Collision) and PET(Post Encroachment Time)), which are safety indicators. The SSAM input variable dataset was constructed using a VISSIM(Verkehr In Städten - SIMulationsmodell) simulation. RESULTS : Introducing one-way traffic rather than the pending issue (two-way operation) improved traffic safety as the possibility of TTC or PET was reduced. In addition, the analysis results showed that the average TTC time and average PET time increased with the introduction of the one-way system. It is anticipated that the avoidance action time taken by the driver to avoid dangerous situations will also increase, which will help improve traffic safety. CONCLUSIONS : As an alternative to solving traffic safety and communication problems occurring at the study site, it was determined that a one-way system would be effective. Furthermore, a one-way system that allows two-lane roads on both sides to move one-way and allows parking in pockets on both sides of the road would be appropriate.

Although it is highly dependent on the production of coastal and offshore fishing, the Fishing Vessels Safety Fisheries Act was enacted in 2019 due to the continuous increase in marine accidents of coastal and offshore fishing vessels. However, the law is too focused on fishing and navigation in certain waters and does not contain accident-preventive content. Ministry of Oceans and Fisheries proposes a plan to revise the Fishing Boat Safety Fishing Act through legal comparison with Japan's Seafarers' Labor Sanitation Rules. It also proposes an amendment that includes the content of the Seafarers Act on post-accident action obligations. Under the Fishing Vessels Safety Fishing Act, the safety fishing education is implemented for specific people and adopts a method of delivery education after completing the education. The reason for this is that the educational requirements are not sufficient compared to the number of education personnel. Moreover, four hours of education are conducted once a year, which is not suitable for insufficient educational conditions. For efficient safety fishing education, improvement measures are proposed compared to education in the United States and the United Kingdom.

기상불량으로 인해 발생하고 있는 해양사고 중 해무 발생에 따른 시계제한은 선박의 좌초, 선저 파손 등의 사고를 유발하는 것과 동시에 사고에 따른 인명피해를 동시에 수반하고 있으며 이는 매년 지속적으로 발생하고 있다. 또한 해상에서의 저시정은 지역간 국소적으로 차이가 존재하는 경우에도 일괄적으로 여객선에 대한 운항 지연 및 통제 조치를 하고 있어 섬주민들의 교통수단 이용에 상당 한 불편을 초래하는 등의 사회적 문제로 대두되고 있다. 더욱이 이와 같은 조치는 지역적 편차나 사람마다 관측의 판단 기준이 상이하여 이를 객관적으로 정량화하지 못하고 있어 더욱 문제가 심화되고 있는 실정이다. 현재 각 항만의 VTS에서는 시정거리가 1km 미만인 경우 선박의 운항을 통제하고 있으며, 이 경우 저시정에 따른 해무 가시거리를 시정계 혹은 육안에 의한 목측(目測)에 의존하고 있을 정도로 객관적인 데이터 수집을 통한 평가에 있어서는 한계가 있다. 정부에서는 이와 같은 해양교통안전 저해요소를 해결하기 위한 일환으로 해 무 탐지 및 예측을 위한 해양기상신호표지 및 해상안개관측망을 구축하여 운용하고 있으나, 국지적으로 발생하는 해무를 관측하기 위한 시스템은 매우 부족한 현실적 어려움에 놓여있다. 이에 따라 본 논문에서는 해상에서의 저시정으로 인해 발생하고 있는 여러 사회적 문 제를 해결하기 위한 국내․외 정책동향에 대해 살펴보고, 이와 관련한 일반국민 및 현장 이해관계자의 인식 정도를 조사․분석하여 해무 에 따른 해상교통안전을 확보하기 위한 정부지원(해무 탐지 및 예측 기술을 기반으로 한 해상교통운영 체계 개발 등)의 필요성에 대한 기 초자료를 제공하고자 한다. 또한 이는 궁극적으로 해무로 인해 발생할 수 있는 해상안전 위험요소를 사전에 차단함으로써 보다 안정된 해상교통운영체계를 마련하는데 그 목적을 두고 있다.

The development of technology related to the Fourth Industrial Revolution and the growth of the online market due to pandemic are continuing the growth of the logistics market for product delivery. If it is difficult to deliver the product directly to the customer during delivery, storage and delivery using the unmanned courier box are being carried out. However, existing storage boxes are not actively used due to lack of usability even though they have the advantage of storing goods and delivering non-face-to-face. In addition, existing courier boxes are not prepared for cold chain transportation. The unmanned delivery storage device with ICT cold chain technology should be developed to prepare for the transition to non-face-to-face society, to improve logistics efficiency and meet user's requirements. Also, it is necessary to consider the measures to reduce the safety problems that may occur during the use and maintenance of the automatic system.This study conducted a model-based analysis for the development of unmanned delivery storage devices with ICT cold chain technology, and conducted a study to derive the system development specifications that meet the requirements and secure safety and apply them to the development process.

This study tried to suggest a systematic improvement plan to prepare a civil safety insurance operation and management system by reviewing the operation and management status of civil safety insurance, which is operated and managed by each local government autonomously. In this study, the problems of the current civil safety insurance were analyzed by dividing them into the lack of systematic management of insurance items, overlapping coverage between insurance items, and deviations in compensation limits. As a systematic improvement plan, it was suggested to secure the systemic management of guarantee items, standardize compensation standards, prepare an integrated operation and management system, and provide financial support for local governments with poor financial independence. Since the problems and improvement plans for the civil safety insurance analyzed as described above are formed by exchanging and receiving a complex mutual influence, the institutional improvement plan for the operation and management system of the civil safety insurance is not only a specific part of the study, but also comprehensively current citizens. Based on the results derived from the analysis of safety insurance, it is concluded that alternatives must be found.

Since cranes are a kind of complex human-machine systems, it is almost impossible to completely secure safety with current technologies. Therefore, managerial interventions to prevent human errors are needed for safely operating a crane. The Occupational Safety and Health law states that cabin-type crane operators should have crane drivers’ licence and crane-related operators (e.g., pendent-type crane operators, slinging workers) should take a special safety training. However, statistics on industrial accidents showed that fatalities due to crane accidents (185 accidents occurred during 2013~2017) were the highest among hazardous machinery and equipment. To effectively control the crane-related accidents, voices of crane workers need to be analyzed to investigate the current status. This study surveyed perceived causes of crane accidents and status of special safety training for crane workers of 387. The survey revealed that 24.3% of the respondents experienced crane accidents and 31.4% eye-witnessed crane accidents. 79% of the respondents pointed human errors such as improper crane operation and improper slinging as the first cause. Lastly, only 16.7% of the respondents took a professional special safety training; but the rest took lecture-based or incomplete education. The findings of the present study can be applied to improve crane-related policies and special safety training systems.

지방관리 무역항은 비교적 중소형 무역항으로 지방도시의 경제력 강화 및 지역 산업 부가가치 제고를 위해 활발한 운영이 필요 하다. 또한, 선박대형화가 이루어지고 있는 국제적 흐름에서 지방관리 무역항의 효율성 증대를 위해 항만기본계획상 기존 선석규모 대비 대형선박의 접안이 필요하며, 부두 및 선박의 안전성 확보를 위해 대형선박 접안시 계류시설 확충 및 안전운용기준 마련이 필요하다. 본 연구에서는 지방관리 무역항 중 옥계항을 선정하여, 현행 2만 DWT급 부두에 5만 DWT급 선박이 계류시 시나리오에 따른 계류안전성 평 가를 수행하였다. 평가 결과, 대상 부두에 100톤급 계선주를 신설하였을 경우, 긴급이안기준은 기존 파주기 3.2초에서 풍속 27노트, 파주기 5.0초에서 풍속 22노트의 계류 한계 조건이 파주기 3.2초에서 풍속 41노트, 파주기 5.0초에서 풍속 36노트로 약 50 % 정도 증가하는 것으로 분석되었다. 본 연구 결과는 지방관리 무역항에 기존 선석규모 대비 대형선박 접안시 부두 계류시설의 안전성 강화와 안전운용기준 설정 을 위한 기초 자료로 활용될 수 있다.

연안통발 어민에 대한 설문조사 결과, 통발 투하 및 인양 중 로프 걸림에 따른 전도사고가 42.1 %로 가장 높았고, 갑판에서 미 끄러짐과 통발 권양장치의 신체 협착사고가 각각 21.1 %를 차지하였다. 또한 가장 위험한 작업은 전체 조사대상의 53.2 %가 통발 인양과 정을 들었고, 어종선별 33.8 %, 통발 투하 9.1 % 순으로 응답하였다. 어민들은 통발 권양장치의 주요 개선 요구사항으로 응답자의 36.8 %와 31.6 %가 통발을 수중에서 작업갑판까지 수월하게 인양하는 방안과 통발 인양 시 로프 장력 극복과 슬립 방지 등 사고저감 방안을 언급하 였다. 본 연구에서 소형 통발어선 권양장치는 구동롤러와 로프 간의 적정한 접촉각을 통해 로프의 접촉면적과 마찰계수를 증가시킴으로 써 권양력을 높이는 것이다. 구동롤러와 로프 간의 접촉각이 1°, 5°, 9°, 14° 및 19°일 때 로프 장력은 각각의 접촉각에 따라 차이를 보였으 며, 9°일 때 가장 높은 392.62 kgf까지 측정되었다. 이러한 실험결과를 반영하여 시제품 권양장치를 제작하고 총 길이가 100 m인 로프에 4 m 간격으로 총 25개의 통발을 해상에 설치한 후 인양에 따른 로프 장력을 측정하였다. 그 결과, 로프 장력은 통발 인양작업 초기에 급격히 증가하여 가장 높은 31.89 kgf로 측정되었으며, 이후에는 크게 낮아졌다. 따라서 소형 통발어선 권양장치의 권양력은 인양작업 초기에 부 여되는 최대 로프 장력 값을 기준으로 설계하는 것이 타당하다.

In order to collect basic data for the improvement of fishing systems in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 on the basic items of coastal improved stow net fishery and safety accidents that occurred during fishing operation. The questionnaire for the survey on the actual conditions of coastal improved stow net fishery consisted of a survey on basic matters (six questions) and a questionnaire (six questions) on safety accidents occurring during fishing operation. The results of the survey on basic items were analyzed by region (Incheon, Seocheon, Gunsan and Mokpo), by the captain’s age (less than 50 years of age, 50 to 60 years and more than 60 years of age), by the captain’s career (less than 20 years, 20 to 30 years, 30 to 40 years and more than 40 years) and by the age of fishing vessel (less than 10 years, 10 to 20 years and more than 20 years). According to the survey on basic items of coastal improved stow net fishery such as the captain’s age, the captain’s career, the age of fishing vessel, the fishing nets in use, the crews on board and the operation days per voyage by region, the average captain’s age was 55.7 years, the average captain’s career was 20.5 years, the average age of fishing vessels was 9.0 years, the average numbers of nets used by fishing boats was 14.0 sets, the average numbers of crew on board a fishing boat was 4.4 persons and the average numbers of operation days per voyage was 4.9 days (p < 0.05). As a result of the survey on safety factors during fishing operations, such as experience of ship accidents, major causes of ship accidents experienced, causes of ship accidents (first priority), experience of human accidents, major causes of human accidents, and causes of human accidents (first priority), more than 96% of the respondents experienced ship accidents including collisions with other vessels or fishing gear during fishing operations. The most significant cause of the accident was the other’s fishing gear installed in the fishing grounds. The first possible causes of ship accidents during fishing operations were found to be other fishing gear installed in fishing grounds, steering or engine failure, and inability to avoid accidents during casting and hauling nets. The survey of the experience of human accidents, such as injuries or sea falls, showed that more than 90% of the respondents experienced human accidents during fishing operations. The most important cause of accidents experienced during fishing operations was stucked in a fishing gear during casting and hauling nets. The first important causes of accidents during fishing operations were movement of the fishing gear during casting and hauling nets, damage of the fishing gear such as rope cutting. The results are expected to be provided as a basic data to prevent safety accidents occurring during fishing operation and improve the fishing system in the coastal improved stow net fishery.