간행물
한국도로학회논문집 KCI 등재 International journal of highway engineering
- 발행기관 한국도로학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1738-7159 (Print)2287-3678 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 토목공학 공학 분류의 다른 간행물
- 십진분류KDC 534DDC 625
권호리스트/논문검색
제25권 제4호 (2023년 8월) 12건
1.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : In this study, we aimed to evaluate the transition temperature (Tt) of asphalt binders using molecular dynamics simulations, which can provide a more accurate assessment of the mechanical properties of a material at the molecular level and can be applied to material development and design. METHODS : Unlike conventional macro- or meso-level simulations, we utilized MD simulations to evaluate the Tg of asphalt binders based on material composition and aging degree as input variables. In this analysis, 11 temperatures ranging from 434 K to 233 K at 20 K intervals were utilized, and the bulk volume and density were calculated through MD simulations. RESULTS : The MD simulation successfully predicted the Tg of the asphalt binder, and the molecular-level properties and interactions determined in this study can be applied not only to material development but also to the determination of constitutive equations or contact models used in continuum mechanics or discrete element methods. The calculated Tg was slightly different depending on the aging of the asphalt binder; however, it was found to accurately reflect the transitional characteristics. CONCLUSIONS : This study demonstrated the potential of MD simulations as valuable tools for material development and design in the construction industry. The results indicate that the use of MD simulations can lead to more accurate and efficient material development and design by providing a more detailed understanding of material properties and interactions at the molecular level.
4,000원
2.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : Due to the frequent occurrence of accidents on icy roads during nighttime, it would be advantageous to notify road managers and drivers about the most perilous areas. This would allow road managers to treat the icy roads with de-icing chemicals and enable drivers to be better prepared for potential hazards. Essential information about pavement temperature is required to identify icy spots on the road. METHODS : With the goal of estimating nighttime pavement temperature on the National Highways in Korea using atmospheric data, the current study investigated a widely recognized forecasting method known as deep neural network (DNN). To achieve this objective, the input data for the models were gathered from the weather agency's website. The dataset comprised of relative humidity, air temperature, dew point temperature, as well as the differences in air temperature and humidity between two consecutive days. RESULTS : In order to assess the effectiveness of the built DNN model, a comparison was made using baseline pavement temperature data gathered through an infrared-based pavement temperature sensor installed in a highway patrol car. The results indicated that the DNN model achieved a mean absolute error (MAE) of 0.42 and a root mean square error (RMSE) of 0.62. In comparison, a conventional regression model yielded an MAE of 2.07 and an RMSE of 2.64. Thus, the DNN model demonstrated superior performance in comparison to the conventional regression model. CONCLUSIONS : Considering the increasing focus on preventive maintenance, these newly developed prediction models can be implemented proactively as a preventive measure against icing. This proactive approach has the potential to significantly improve traffic safety on winter roads.
4,000원
3.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : The objective of this study is to develop the data driven pavement condition index by considering the traffic and climatic characteristics in Incheon city. METHODS : The Incheon pavement condition index (IPCI) was proposed using the weighted sum concept with standardization and coefficient of variation for measured pavement performance data, such as crack rate, rut depth, and International Roughness Index (IRI). A correlation study between the National Highway Pavement Condition Index (NHPCI) and Seoul Pavement Condition Index (SPI) was conducted to validate the accuracy of the IPCI. RESULTS : The equation for determining the IPCI was developed using standardization and the coefficient of variation for the crack rate, rut depth, and IRI collected in the field. It was found from the statistical analysis that the weight factors of the IPCI for the crack rate were twice as high as those for the rut depth and IRI. It was also observed that IPCI had a close correlation with the NHPCI and SPI, albeit with some degree of scattering. This correlation study between the NHPCI and SPI indicates that the existing pavement condition index does not consider the asymmetry of the original measured data. CONCLUSIONS : The proposed pavement condition provides an index value that considers the characteristics of the original raw data measured in the field. The developed pavement condition index is extensively used to determine the timing and method of pavement repair, and to establish pavement maintenance and rehabilitation strategies in Incheon.
4,000원
4.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : In this study, we aim to broaden the understanding of the factors influencing the accuracy of WIM systems for overload enforcement. Particularly, we explored the proportions and causes of secondary influencing factors (driving path, vehicle class, and acceleration), which have been relatively less studied and reduced the accuracy of the WIM system. METHODS : Overload enforcement data were recorded by the WIM system, and enforcement officers were gathered. The ratios of each data point, which are the relative errors, are used to estimate the accuracy of the WIM system. These relative errors were classified into four driving-path groups, four vehicle-class groups, and three acceleration groups. The change in the accuracy of the WIM system caused by each influencing factor was analyzed by comparing the difference in the average relative error between the classified groups. Analysis of variance (ANOVA) and Welch's ANOVA were used to determine significant differences between groups. RESULTS : Vehicles departing from a normal driving path make it difficult for the GVW compensation algorithm of the WIM system to operate properly. For these abnormal paths, the standard deviation of the average GVW relative error was 22%. There was no specific trend in the difference in accuracy by vehicle class. However, we found that the rear axle and retractable axle were the main causes of the reduced GVW accuracy in each vehicle class. The average GVW relative error remained the same regardless of the acceleration, but the average FAW relative error of the accelerated vehicle was approximately 2.5% lower than that of the unaccelerated vehicle. CONCLUSIONS : An abnormal driving path, lifting of a retractable axle, and rapid acceleration (or deceleration) reduce the accuracy of WIM systems. Intelligent transportation systems, such as traffic signals, telematics devices, and applications that induce desirable driving are required for effective overload enforcement. Additionally, it is necessary to smoothen the road pavement to minimize the dynamic effects on the rear axle.
4,200원
5.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : The numeric-based Highway Pavement Management System (HPMS), along with an advanced three-dimensional pavement condition monitoring profiler vehicle (3DPM), in South Korea has presented remarkable advancements in pavement management since the early 2000. Based on these results, visual distress on pavement surfaces can be easily detected and analyzed. Additionally, the entire expressway pavement surface conditions in South Korea can be easily monitored using the current graphical user interface-based advanced information graphic (AIG) approach. Therefore, a critically negative pavement section can be detected and managed more easily and efficiently. However, the actual mechanical performance of the selected pavement layer still needs to be investigated in a more thorough manner not only to provide more accurate pavement performance results but also to verify the feasibility of the current 3DPM and AIG approaches. In this study, the low-temperature performance of the selected asphalt pavement layer section was evaluated to further verify and strengthen the feasibility of the current 3DPM and AIG approaches developed by the Korea Expressway Corporation. METHODS : Based on 3DPM and AIG approach, the positive and negative-riding-quality road sections were selected, respectively. The asphalt material cores were extracted from each section then bending beam rheometer mixture creep test was performed to measure their low-temperature properties. Based on the experimental results, thermal stress results were computed and visually compared. RESULTS : As expected, the asphalt material from the negative driving performance section presented a poorer low-temperature cracking resistance than that from the positive driving performance section. CONCLUSIONS : Current 3DPM equipment can successfully evaluate expressway surface conditions and the corresponding material performance quality. However, more extensive experimental studies are recommended to verify and strengthen the findings of this study
4,000원
6.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : The purpose of this study was to evaluate the performance of a titanium dioxide (TiO2) asphalt surface treatment agent for reducing NOx on the roadside at laboratory and full scales. METHODS : To verify the NOx reduction performance of TiO2 and silicon-based resin-applied surface treatment agents at the lab scale, a bed flow photo reactor test (ISO standard) and a mixed tank photo reactor test designed to apply real-scale construction materials were conducted. Subsequently, the full-scale NOx reduction performance was verified using a full-scale demonstration facility, and the field construction capability of the TiO2 asphalt surface treatment agent was verified through actual road site application. RESULTS : The bed flow photoreactor and mixed tank photoreactor methods showed the same trend in the NOx removal performance. Evaluation of the NOx removal performance of the TiO2 surface treatment agent revealed that the NO removal rate was approximately 13% at the laboratory scale and 15% at full scale. CONCLUSIONS : Through this study, it was determined that the asphalt surface treatment agent applied with TiO2 will have a sufficient NOx reduction effect in an actual road site. In the future, it will be necessary to analyze the continuity of the effect according to traffic volume through continuous monitoring in the field.
4,000원
7.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : Because a driving simulator typically focuses on analyzing a driver’s driving behavior, it is difficult to analyze the effect on the overall traffic flow. In contrast, traffic simulation can analyze traffic flow, that is, the interaction between vehicles; however, it has limitations in describing a driver’s driving behavior. Therefore, a method for integrating the simulator and traffic simulation was proposed. Information that could be controlled through driving experiments was used, and only the lane-change distance was considered so that a more natural driving behavior could be described in the traffic flow. METHODS : The simulated connection method proposed in this study was implemented under the assumption of specific traffic conditions. The driver’s lane-changing behavior (lane-changing distance, deceleration, and steering wheel) due to the occurrence of road debris was collected through a driving study. The lane-change distance was input as a parameter for the traffic simulation. Driving behavior and safety were compared between the basic traffic simulation setting, in which the driver's driving behavior information was not reflected, and the situation in which the driving simulator and traffic simulation were integrated. RESULTS : The number of conflicts between the traffic simulation default settings (Case 1) and the situation in which the driving simulator and traffic simulation were integrated (Case 2) was determined and compared for each analysis. The analysis revealed that the number of conflicts varied based on the level of service and road alignment of the analysis section. In addition, a statistical analysis was performed to verify the differences between the scenarios. There was a significant difference in the number of conflicts based on the level of service and road alignment. When analyzing a traffic simulation, it is necessary to replicate the driving behavior of the actual driver. CONCLUSIONS : We proposed an integration plan between the driving simulator and traffic simulation. This information can be used as fundamental data for the advancement of simulation integration methods.
4,300원
8.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : The primary objective of this study is to analyze the relationship between the factors that affect traffic incident duration in the mainline, tunnel, and ramp segments of an expressway. In addition, this study derived the most suitable statistical prediction model based on various incident duration distributions. METHODS : South Korean expressway crash data for 11 years, from 2011 to 2021, were analyzed. The incident durations on the mainline, tunnel, and ramp segments were selected using the accelerated failure time model, which is a parametric survival analysis approach. RESULTS : The mainline segment showed that the incident duration increased during accidents, including guard pipe collisions, multivehicle collisions, and snowfall. In particular, collisions in a tunnel with shoulder facilities increase the incident duration, while decreasing the time in the ramp segment. CONCLUSIONS : The incident duration model for each segment type yielded the most accurate results when applying a log-logistic distribution.
4,000원
9.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : Most Red bus1) (metropolitan bus) routes to Seoul need to increase supply by increasing the number of buses and number of trips because of the high level of congestion in buses, which also accommodate standing passengers. Due to the recent Itaewon disaster, people have been banned from standing on Red buses due to concerns over the excessive use of public transportation, adding to the inconvenience of passengers, such as increased travel time. However, some routes incur a large deficit owing to excess vehicles and trips relative to the number of passengers, thereby increasing the financial burden of Gyeonggi. Therefore, in this study, a reasonable operation plan is required based on the demand on Red bus routes. METHODS : Using accurate data from smart cards and a Bus Management System, the model was applied to consider bus usage, bus arrival distribution, waiting time, and operating conditions, such as actual bus usage time and bus dispatch interval. RESULTS : As a result of applying the model, buses between 7:00 and 9:00 and 16:00 and 18:00 were very crowded because of standing passengers, and passenger inconvenience costs decreased because of the longer waiting times for bus stops in Seoul. Currently, there are 15 buses in operation for the red bus G8110. However, considering the annual transportation cost, transportation income, and support fund limit, up to 12 buses can be operated per day. The G8110 route was analyzed at 23.6 million won for passenger discomfort cost, as 15 buses operated 97 times per day on weekdays. However, when establishing optimal scheduling, 12 buses per day operated 75 times per day, with a 19.7 million won passenger discomfort cost. CONCLUSIONS : As all red buses run from the starting point, passengers at the bus stop wait for more than an hour before entering Seoul, and the passenger discomfort cost of using demand-responsive chartered buses decreases only when commuting from Jeongja Station and Namdaemun Tax Office stops. Currently, many people commuting from Gyeonggi-do to Seoul are experiencing significant inconvenience owing to the ban on standing in Red buses; a suitable level of input can be suggested for the input and expansion of chartered buses.
4,200원
10.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : This study aims to develop and validate timing transition techniques for real-time traffic signal operations, departing from conventional methods based on past commuting traffic patterns. METHODS : In this study, we propose two traffic signal transition techniques that can perform transitions while minimizing disruptions within a short period. The Proposed 1 technique involves an unconditional transition within one cycle and allows for the allocation of offset changes to both the coordinated and non-coordinated phases. The Proposed 2 technique performs transitions within 1-2 cycles based on the offset change rate and considers the non-coordinated phase for allocating offset changes. RESULTS : Functional improvements of the proposed techniques were validated. For validation, simulated traffic signal transition scenarios were created, and a comparative analysis of the transition techniques was performed based on the selected analysis approaches. The results showed that the Proposed 1 technique exhibited the lowest delay during the approximated saturated transitions, whereas the Subtract technique showed the lowest delay during the non-saturated transitions. CONCLUSIONS : These findings emphasize the importance of selecting and applying appropriate transition techniques tailored to individual traffic scenarios. The proposed transition techniques provide valuable insights for improving real-time traffic signal operations, and contribute to the overall efficiency and effectiveness of traffic management in highway corridors.
4,000원
11.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : This paper proposes an artificial neural network (ANN)-based real-time traffic signal time design model using real-time field data available at intersections equipped with smart intersections. The proposed model generates suitable traffic signal timings for the next cycle, which are assumed to be near the optimal values based on a set of counted directional real-time traffic volumes. METHODS : A training dataset of optimal traffic signal timing data was prepared through the CORSIM Optimal Signal Timing program developed for this study to find the best signal timings, minimizing intersection control delays estimated with CORSIM and a heuristic searching method. The proposed traffic signal timing design model was developed using a training dataset and an ANN learning process. To determine the difference between the traditional pre-time model primarily used in practice and the proposed model, a comparison test was conducted with historical data obtained for a month at a specific intersection in Uiwang, Korea. RESULTS : The test results revealed that the proposed method could reduce control delays for most of the day compared to the existing methods, excluding the peak hour periods when control delays were similar. This is because existing methods focus only on peak times in practice. CONCLUSIONS : The results indicate that the proposed method enhances the performance of traffic signal systems because it rapidly provides alternatives for all-day cycle periods. This would also reduce the management cost (repeated field data collection) required to increase the performance to that level. A robust traffic-signal timing design model (e.g., ANN) is required to handle various combinations of directional demands.
4,000원
12.
2023.08
구독 인증기관 무료, 개인회원 유료
PURPOSES : This study establishes a methodology for evaluating traffic safety in response to the introduction of one-way traffic using surrogate safety measures and analyzes the impact of one-way traffic safety through a case analysis. METHODS : The SSAM(Surrogate Safety Assessment Measure) was used to analyze traffic conflicts (TTC(Time to Collision) and PET(Post Encroachment Time)), which are safety indicators. The SSAM input variable dataset was constructed using a VISSIM(Verkehr In Städten - SIMulationsmodell) simulation. RESULTS : Introducing one-way traffic rather than the pending issue (two-way operation) improved traffic safety as the possibility of TTC or PET was reduced. In addition, the analysis results showed that the average TTC time and average PET time increased with the introduction of the one-way system. It is anticipated that the avoidance action time taken by the driver to avoid dangerous situations will also increase, which will help improve traffic safety. CONCLUSIONS : As an alternative to solving traffic safety and communication problems occurring at the study site, it was determined that a one-way system would be effective. Furthermore, a one-way system that allows two-lane roads on both sides to move one-way and allows parking in pockets on both sides of the road would be appropriate.
4,000원
