Double-layer supercapacitors ( SCs) based on carbon quantum dots (CQDs) are a novel and highly potential electrical energy storage technology. They have a high-power density (Pd) and a long span life, which are desirable for electric automobiles, however, their specific capacitance (Csp) needs to be improved. Here, we introduce an affordable and environmentally sustainable method to enhance the capacitance of Boron-Sulphur doped carbon quantum dots (B,S-CQDs) from Oloptum miliaceum (Grass) via the hydrothermal method. The findings show that heteroatom-doping might greatly enhance the Csp and energy density (Ed) when compared to undoped CQDs. As a consequence, the B,S-CQDs demonstrate a high Csp of 390 F g− 1 at 0.1 A g− 1 and 152 F g− 1 at 1.0 A g− 1, revealing excellent rate performance. Along with the electrode demonstrates superb coulombic efficiency with only 2% efficiency loss after 3000 cycles. Furthermore, the B,S-CQDs with a wide voltage range of 0.8 V yields a remarkable Ed of 48.0 Wh kg− 1 and Pd of 524 W kg− 1. These promising findings demonstrate an economical and environmentally friendly electrode material for high-performance SCs. This study offers ideas for the design and preparation of SCs electrode materials and represents a major endeavour to turn waste biomass (smilograss) into a useful electrode material.

Developing highly durable and active catalysts is essential for improving the performance and longevity of proton exchange membrane fuel cells (PEMFCs). In this study, we propose a novel strategy to enhance catalyst dispersion and stability by incorporating pyrrolic nitrogen-rich carbon (pNC) quantum dots into highly crystalline carbon supports. The introduction of pNC generates strong anchoring sites for Pt nanoparticles, facilitating uniform dispersion and minimizing aggregation, which are key factors in enhancing catalytic performance and durability. The synthesized Pt/CVC150 catalyst exhibited excellent oxygen reduction reaction activity, with a half-wave potential of 0.842 V and a limiting current density of 6.3 mA cm− 2. Under accelerated stress test conditions, the catalyst retained 61.4% of its initial peak power density after prolonged cycling, indicating enhanced durability. Furthermore, single cell testing confirmed its improved electrochemical activity and stability of the Pt/CVC150 catalyst in a practical PEMFC operating environment. These findings suggest that the incorporation of heteroatom-doped carbon moieties onto carbon supports represents a promising strategy for the development of nextgeneration PEMFC catalysts with enhanced performance and longevity.

The avenue to synthesize eco-friendly and high-performing warm-white light emitting diodes (WLEDs) using quantum-dots for color conversion is challenging. Here, the graphene quantum dots (GQDs) are synthesized from Moringa oleifera leaves without the need of any organic solvents or reducing agents by a one-pot hydrothermal method and utilized for the design of efficient warm WLEDs. The photoluminescence of the obtained GQDs is found to be red-shifted as the excitation wavelength increases. This is ascribed to an excitation of multiple transitions due to various surface traps related to surface amino and oxygen functionalized groups as revealed from X-ray-photoelectron–spectroscopy and FTIR results. Three different concentrations of GQDs are embedded in polyvinyl-alcohol matrix acting as color-converters for the design of WLED devices. By increasing the GQDs concentration, the color correlated temperatures are tuned from 3804 to 2593 K and the luminous efficacy from 39.3 to 71.69 lm/W. Moreover, the chromaticity coordinates of the devices are shifted from (0.3825, 0.3665) to (0.4807, 0.4478). The brightness of the fabricated devices based on these green-GQDs are comparable with those of warm LEDs prepared from chemically synthesized graphene and carbon dots and can be suitable for indoor lighting applications.

In this study, quantum dots with Au/CdSe complex cores composed of Au as a metal base were synthesized, syrup was prepared, and coated on natural simulated LED unit modules, and the optical properties of traffic signs using them were investigated, and the following conclusions were obtained. The nanoparticles synthesized at 260°C and 280°C grew into irregular shapes with PL wavelengths of 624-627㎛, half-widths of 35㎛, PL-QY ratios of 55-61%, and grain diameters of 5-7㎛. The quantum dot syrup was applied to the LED unit module to produce a traffic sign composed of 4CL unit modules, and the luminance of 179 ㏅/㎡, insulation resistance of 10,000㏁, and insulation withstand of 500V were achieved, meeting the performance and specifications of the standard guidelines for luminescent traffic safety signs. The surface temperature of the unit module laminated with 4CL resin is 24~25℃, which shows a stable heat distribution, confirming that it can be applied as a sign using unit modules.

This study details the synthesis and characterization of phosphorus-sulfur co-doped graphitic carbon nitride quantum dots (PSQ) and their integration into g-C3N4 (CN) to form PSQ/CN composites for the enhanced photocatalytic reduction of Cr(VI) and fluorescence detection. Incorporating PSQ into CN was found to significantly improve light absorption, narrow the band gap, and enhance charge separation efficiency. Notably, the composite material exhibits superior photocatalytic performance, especially in acidic environments. Photocatalytic assessments utilizing Cr(VI) demonstrated that the PSQ/ CN composite outperformed both undoped and singly doped materials, indicating its superior photocatalytic activity. Additionally, phosphorus-sulfur co-doping markedly increased the fluorescence quantum yield of PSQ. The fluorescence intensity exhibited a linear decrease with increasing Cr(VI) concentrations, enabling sensitive and selective detection of Cr(VI) with a detection limit as low as 1.69 μmol/L. Collectively, the PSQ/CN composite and PSQ highlight their potential for photocatalysis and fluorescence-based detection of Cr(VI), providing high sensitivity, selectivity, and synergistic interactions within the composite material.

Quantum dot nanocomposite-based luminescent materials have gained attention for solid-state lighting and optical displays. This study presents a one-step, eco-friendly hydrothermal process to synthesize nitrogen, potassium, and calcium-doped carbon quantum dots (N, K, Ca-doped CQDs) from the flower extract of Mesembryanthemum crystallinum L. (ice plant). The CQDs were characterized using HRTEM, EDX, SAED, XPS, XRD, NMR, FTIR, zeta potential, UV–Vis, and photoluminescence spectroscopy. HRTEM revealed an average particle size of 4.6 nm, with a range of 2 to 7 nm. The CQDs exhibited a quantum yield of 20%, excellent water solubility, photostability, and greenish fluorescence under UV (365 nm). The fluorescence spectra were analyzed using CIE (Commission Internationale de l’Eclairage) chromaticity coordinates to determine the emitted color. The fluorescence emission behavior was influenced by solvent polarity, locally excited (LE) states, intramolecular charge transfer (ICT) processes, and hydrogen bonding. The hydrogen bonds between N, K, Ca-doped CQDs and DI water likely enhanced the stability of the ICT state, resulting in a red shift in fluorescence. Additionally, we developed an eco-friendly wheat-starch-based bioplastic nanocomposite by embedding the CQDs. The effects of CQD concentration and pH sensitivity on luminescent properties were explored. Finally, we demonstrated a practical application by designing a conceptual nameplate-like calligraphy using the optimized CQDs@bioplastic nanocomposite film (CQD concentration: 240 mg/mL, pH: 2.7), highlighting its potential for luminescent film applications.

This study incorporates the formation of carbon quantum dots (CQDs) via a hydrothermal approach, recording the first-time use of castor leaves as a natural precursor. The used precursor offers various benefits including novelty, abundance, elemental composition, and biocompatibility. CQDs were further characterized with multiple techniques including high-resolution transmission electron microscope (HR-TEM), X-ray photoelectron microscopy (XPS), X-ray diffraction (XRD), Fouriertransform infrared spectroscopy (FTIR), Raman spectroscopy, UV–visible spectroscopy, Zeta analysis, and optical spectroscopy. They are fundamentally composed of carbon (71.37%), nitrogen (3.91%), and oxygen (24.73%) and are nearly spherical, and uniformly distributed with an average diameter of 2.7 nm. They possess numerous interesting characteristics like broad excitation/emission bands, excitation-sensitive emission, marvelous photostability, reactivity, thermo-sensitivity, etc. A temperature sensor (thermal sensitivity of 0.58% C− 1) with repeatability and reversibility of results is also demonstrated. Additionally, they were found selective and sensitive to ions in aqueous solutions. So, they are also utilized as a fluorescent probe for metal ion ( Fe3+) sensing. The lowest limit of detection (LOD) value for the current metal ion sensor is 19.1 μM/L.

Graphene quantum dots have recently gained significant attention for their potential application in the development of optoelectronic materials. The present study focused on the ultrasonic method to synthesize white-light-emitting graphene quantum dots from coal soot in just 2 min at room temperature. The white-light emission was achieved in solution and polymeric film with good Commission Internationale del’Eclairage index (0.28, 0.33) and (0.25, 0.30), respectively. The graphene quantum dots cover a significant fraction of the visible region in the emission spectrum with two prominent bands at 475 and 635 nm at 380 nm photoexcitation, corresponding to monomer and J-aggregate emission. The strong reducing and basic nature of the ethylene diamine facilitated the preparation of self-assembled J-aggregate graphene quantum dots through hydrogen bonding and electrostatic interaction. The mechanism of origin J-aggregate emission in the prepared graphene quantum dots was studied using UV–visible absorption, steady-state, lifetime fluorescence spectroscopy, and zeta potential. The as-synthesized graphene quantum dots are successfully coated on the UV-LEDs' surface and emit white light on the applied voltage. The colours of red, green, blue, and yellow balls appear significantly in the lighting of prepared white LEDs.

Due to the sturdy photoluminescence and absorption, CQDs emerged as a suitable candidate for optical sensing probe. The present study deals with the synthesis of blue-fluorescent Carbon Quantum Dot (TAA-CQD) using tannic acid and glycine as novel precursors. The TAA-CQD were synthesised hydrothermally with the high production yield and QY to be 86.12 and 21%, respectively, and an average particle size of 1.9 nm. The TAA-CQD aqueous solution displays excitation-dependent fluorescence emission in the excited range from 420 to 650 nm. The CIE co-ordinates in a highly blue region at (0.14, 0.19) confirmed the synthesised TAA-CQD were blue in fluorescent. Fluorescence of TAA-CQD was stable under all pH range, resisted the high ionic strengths condition and stable over 8 months. Furthermore, the fluorescent TAA-CQD was capable in detecting a tetracycline-classed antibiotic Doxycycline (DXY) along with remarkable selectivity and sensitivity. The measures limit of detection (LOD) was very low 2.42 mM in comparison to other methods. Moreover, the applicability of the proposed work has been fruitfully employed on the pharmaceutical waste. Thus, our designed TAA-CQD based fluorescence sensing system hold great promise for the advanced sensing materials in the detection of DXY and we believe that our approach will be promising and viable in a clinical applications.

Ibuprofen (IBU), a common pharmaceutical and personal care product (PPCP), is a pervasive water pollutant with adverse ecological and human health effects after transformation and accumulation. In this study, we synthesized Fe, N-doped carbon quantum dots (Fe, N-CQDs) using pig blood and FeCl3 as a precursor via a one-step hydrothermal method. TEM, XRD, XPS, and UV–Vis were used to characterize the physical and chemical properties of Fe, N-CQDs. We investigated the feasibility of Fe, N-CQDs in activating peroxymonosulfate (PMS) for IBU degradation under visible light. The experimental results revealed that Fe in Fe, N-CQDs predominantly formed a stable complex through Fe–N and Fe-OH, with a high degree of graphitization and a sp2- hybridized graphitic phase conjugate structure. The Fe, N-CQDs/Light/PMS system exhibited strong activity, degrading over 87% of IBU, maintaining a wide pH range (3–10) adaptability. Notably, Fe, N-CQDs acted as visible-light catalysts, promoting Fe3+/ Fe2+ cycling and PMS activation, generating both free radicals ( SO4 •–, ·OH) and non-radicals (1O2, h+) to effectively degrade IBU. This study presents an innovative approach for the sustainable utilization of pig blood as a biomass precursor to synthesize Fe- and N-doped carbon materials. This study provides a new approach for the sustainable and value-added utilization of natural wastes and biomass precursors of Fe- and N-doped carbon materials, which can be used to treat pollutants in water while treating discarded pig blood.

In this study, high-efficiency InZnP/ZnSe/ZnS quantum dots (QDs) were synthesized and applied to the development of self-luminous traffic signs. The synthesized QDs exhibited a photoluminescence (PL) peak wavelength of 613 nm and a uniform nanoparticle size of 6 nm in diameter. Quantum dot films were coated using a roll-to-roll process with varying thicknesses (110 μm, 85 μm, and 75 μm), and color coordinate analysis confirmed that all films fell within the red region. A 4CL resin and PCB with high thermal dissipation properties were employed to fabricate the self-luminous traffic signs. Performance evaluations showed a white luminance of 625.4 cd/㎡, a red luminance of 220.2 cd/㎡, an insulation resistance of 10,000 MΩ, and an insulation breakdown voltage of 500V, indicating excellent performance. This study confirms the potential of InZnP-based QDs as an environmentally friendly alternative to conventional Cd-based QDs. Furthermore, the integration of high-efficiency QD films with advanced heat-dissipating PCB technology is expected to improve traffic safety, particularly in low-visibility and nighttime environments

Lithium-ion batteries (LIBs) are widely used as essential power sources for electric vehicles and energy storage systems. Among various cathode materials, Li[Ni0.9Mn0.1]O2 (NM90) has gained significant attention for enhancing the performance of LIBs due to its high energy density and nontoxicity. However, increasing the nickel content introduces challenges, including structural instability and cation mixing. To address these issues, we propose a surface coating strategy using nitrogendoped carbon quantum dots (NCQDs). NCQDs provide high electrical conductivity and electrochemically active sites, so the NCQDs coating effectively enhanced both structural stability and electrical/ionic conductivity. The NCQDs were synthesized via a hydrothermal method, and NM90 were synthesized by co-precipitation. The fabricated NCQD/NM_5 electrode exhibited superior electrochemical properties, including a high initial capacity of 189.6 mAh/g, excellent rate performance, and an outstanding capacity retention of 81.5 % after 200 cycles in 1C. These superior results demonstrate that surface modification using the NCQDs strategy for Li[Ni0.9Mn0.1]O2 cathode materials will contribute to the further development of cycle stability and ultrafast performance in energy storage systems.

A simple and effective method was developed to prepare fluorescent carbon quantum dots (CQDs) for the detection of Fe3+ and Cu2+ in aqueous solution. The water-soluble CQDs with the diameter around 2–5 nm were synthesized using anthracite coal as the precursor. In addition, the as-prepared CQDs exhibits sensitive detection properties for Fe3+ and Cu2+ metal cations with a detection limit of 18.4 nM and 15.6 nM, respectively, indicating that the coal-derived CQDs sensor is superior for heavy metal recognition and environmental monitoring.

Carbon quantum dots (CQDs) are novel nanocarbon materials and widely used nanoparticles. They have gradually gained popularity in various fields due to their abundance, inexpensive cost, small size, ease of engineering, and distinct properties. To determine the antibacterial activity of metal-doped CQDs (metal-CQDs) containing Fe, Zn, Mn, Ni, and Co, we chose Staphylococcus aureus as a representative Gram-positive strain and Escherichia coli as a representative Gram-negative bacterial strain. Paper disc diffusion tests were conducted for the qualitative results, and a cell growth curve was drawn for quantitative results. The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and IC50 were measured from cell growth curves. As a result, all of the metal-CQDs showed toxicity against both Gram-positive and Gram-negative bacteria. Furthermore, Gram-negative bacteria was vulnerable to metal-CQDs than Gram-positive bacteria. The toxicity differed concerning the type of metal-CQDs; Mn-CQDs exhibited the highest efficacy. Hence, this study suggested that CQDs can be used as new nanoparticles for antibiotics.

Fluorescent Carbon Quantum Dots (FCQDs), a new generation of carbon nanomaterials, have attracted a lot of attention throughout the years. This paper applied a straightforward and environmentally beneficial way to create water-soluble FCQDs hydrothermally from coconut shells. The as-prepared FCQDs have desirable functional groups and exhibit strong blue-emitting fluorescence with a relative quantum yield of 0.6 and 0.7%. The optical bandgap of FCQDs is calculated using UV–Vis spectra to be between 3.9 and 4.4 eV. Optical studies show that FCQDs have good fluorescence properties when excited at 360 nm. Whereas the fluorescence decay lifetime using TCSPC are 1.6–0.99 ns. The synthesized FCQDs were found by HRTEM to have a spherical shape and a particle-size distribution of 2.8–5.4 nm. As-prepared FCQDs has a very low hemotoxicity of 0.5 to 1.3%, which indicates that they have acceptable biocompatibility and are not hazardous. According to the DPPH antioxidant data, FCQDs had a stronger antioxidant activity compared to earlier reports. These important characteristics enable its applications in biomedical, food packaging, fluorescence imaging, photocatalysis, and sensing. The enhanced antioxidant characteristics of the produced FCQDs make them appropriate for use in biomedical, bioimaging, chemical, and industrial applications. The as-synthesized FCQDs were used for the detection of ferric ions with good selectivity.

InP quantum dots (QDs) have attracted researchers’ interest due to their applicability in quantum dot light-emitting displays (QLED) or biomarkers for detecting cancers or viruses. The surface or interface control of InP QD core/ shell has substantially increased quantum efficiency, with a quantum yield of 100% reached by introducing HF to inhibit oxide generation. In this study, we focused on the control of bandgap energy of quantum dots by changing the Zn/(In+Zn) ratio in the In(Zn)P core. Zinc incorporation can change the photoluminescent light colors of green, yellow, orange, and red. Diluting a solution of as-synthesized QDs by more than 100 times did not show any quenching effects by the Förster resonance energy transfer phenomenon between neighboring QDs.

This study is about the optical properties of InP-based quantum dot nanoparticles depending on their core/shell structure. The need to synthesize non-cadmium-based quantum dot nanoparticles with high quantum efficiency has become necessary due to the harmful effects of the element cadmium. We synthesized three types of quantum dot nanoparticles in 2000ml three-necked flasks by varying the synthesis temperature and time to have the same PL spectra according to the composition of the core and shell. The PL spectra, absolute quantum efficiency, and nanoparticle size were compared and analyzed according to the composition at red emission wavelengths of 614, 616, and 630 nm. InP/ZnSe/ZnS nanoparticles were synthesized with the highest PL-AQY of 94% at 614 μm, and Ga-doped InP/GaP/ZnSe/ZnS nanoparticles were synthesized with the highest PL-AQY of 97% at 616 μm. InZnP/ZnSe/ZnS nanoparticles with alloy cores were able to synthesize quantum dot nanoparticles with a peak PL-AQY of 98% at 630μm.

The detailed understanding of fluorescence emission processes is still unclear. This study demonstrates Aegle marmelos derived luminescent heteroatoms (N, Ca, K) doped carbon quantum dots (CQDs) using an economically and ecologically sustainable synthesis process without the necessity for any doping precursors due to its phytochemical, vitamin and mineral content. Carboxyl functionalization was done by adding lemon juice to the fruit extract. The morphological, physiochemical, compositional, crystallinity, and surface functional groups having heteroatom doped CQDs were analysed by HRTEM, EDX, XPS, XRD, FTIR etc. Besides, CQDs exhibited pH and solvent-dependent tuneable fluorescence characteristics. In fact, beyond pH 7.77, a protonation-deprotonation-driven red-shift was observed together with a decrease in the contribution of prominent peaks. Meanwhile, the features of solvatochromic fluorescence were examined in a range of aprotic and protic solvents with low and high polarity. Based on the studied Kamlet–Taft parameters and the obtained spectroscopic characterizations, a suitable fluorescence emission mechanism is provided. The observed solvatochromic fluorescence is thought to be caused by a combination of dipole moment polarisation, intramolecular charge transfer processes with or without H-bond stabilisation via the interaction of heteroatoms doped CQDs with solvent mediated by electron donation and acceptance from various surface functional groups such as hydroxyl, carboxyl with solvent molecules. Hence, this study is believed to promote the development of eco-tuneable fluorescent heteroatom doped CQDs and provide further insights into the fundamental fluorescence mechanisms, which include the relationship between morphology, surface properties and plausible quantum effects between CQDs and solvents.

Composites of carbon quantum dots (CQDs) are important materials to utilize the optical properties of CQDs in diverse applications including photoluminescence-based sensing and LED phosphors. Combining pre-prepared CQDs with a polymeric matrix usually causes changes in the optical properties of CQDs due to unavoidable aggregation. Recently, the preparation of composites based on in-situ formed CQDs has been debated to overcome the aggregation limits of the conventional mixing methods. Herein, we have demonstrated the synthesis of homogeneous CQDs composites by simple thermal annealing blends of aluminum hydroxide (AlOH), citric acid (CA), and urea (URA). Transmission electron microscopy (TEM), X-ray diffraction, and Raman spectroscopy studies revealed the formation of individual CQDs with a diameter of about 2–9 nm dispersed homogeneously over the AlOH matrix. The composites have a broad excitation band centered at about 360 nm and exhibit excitation-dependent photoluminescence which was similar to that of hydrothermally synthesized CQDs from CA and URA. The photoluminescent intensity of the composite was stable to UV irradiation and responded selectively to Cu(II) ion demonstrating its potential application in Cu(II) sensing.

Graphene quantum dots (GQDs) are zero-dimensional carbonous materials with exceptional physical and chemical properties such as a tuneable band gap, good conductivity, quantum confinement, and edge effect. The introduction of GQDs in various layers of solar cells (SCs) such as hole transport layer (HTL), electron transport materials (ETM), cathode interlayer (CIL), photoanode materials (PAM), counter electrode (CE), and transparent conducting electrode (TCE) could improve the solar energy (SE) harvesting, separation and transportation of electrons and hole, thus ultimately enhance the overall performance and stability of SCs. The incorporation of GQDs in various layers such as HTL, ETM, CIL, PAM, CE, and TCE achieved photo conversion efficiencies (PCEs) of 18.63, 21.1, 12.81, 9.41, 8.1, and 3.66%, respectively. Furthermore, GQDs improved stabilities such as resistance to degradation for HTL (up to 77%), ETM (80%), resistance to UV light for ETM (94%), resistance to temperature in ETM (90%), and bending stabilities after 1000 cycles for HTL (88%) and for TCE (90%). There are reviews focused on the utilization of different carbon-structured materials such as graphene, carbon nanotubes (CNT), fullerenes, and carbon dots in SCs applications. More specifically, the utilization of GQDs for SCs is limited and yet to be explored in greater detail. This review mainly focuses on the recent advancement of various techniques of production of GQDs synthesis, utilization of GQDs in various layers like HTL, ETM, CIL, PAM, CE, and TCE for the enhancement of PCE, and the stability of SCs. As a result, we believe that an exclusive study on GQDs-sensitized solar cells (GQDSSCs) could provide an in-depth analysis of the recent progress, achievements, and challenges.