Background: Many trials have been conducted the methods and types of intervention of form rollers, but no research has been done yet that mixes the methods and types of intervention. Objectives: To analyze the effects of myofascial release on the improvement of range of motion (ROM), flexibility, pain pressure threshold, and balance. Design: Randomized controlled trial. Methods: All subjects measured ROM, flexibility, pressure pain threshold, and dynamic balance by pre-test. After pre-test, subjects were randomized that static-vibration foam rolling group (n=12), dynamic-vibration foam rolling group (n=12), general foam rolling group (n=12). For the intervention, 3 sets of 90 seconds were applied to each group, and rest time was set to 60 seconds between sets. In the post-test and follow-up test after 10 minutes, all three groups were measured the ROM, flexibility, pressure pain threshold, and dynamic balance. Results: The results of comparing ROM, flexibility, pressure pain thresholds, dynamic balance ability appeared higher significant difference in the prepost- 10 minutes follow up test in comparison between time in the intragroup (P<.001). As a result of comparing the change of pre-post-10 minutes follow up, static vibration foam rolling showed higher significant difference compared to control groups (P<.001). Conclusion: Through this study, when foam rolling is applied within the same intervention time, static foam rolling can be expected to have a better effect than the existing dynamic foam rolling as well as vibration foam roller can expect better effect than general foam rolling.

PURPOSES: The purpose of this research is to analyze the characteristics of panels that affect the evaluating results of riding quality and to evaluate the appropriateness of roughness management criteria based on ride comfort satisfaction. METHODS: In order to analyze the influence of panel characteristics of riding quality, 33 panels, consisting of civilians and experts, were selected. Also, considering the roughness distribution of the expressway, 35 sections with MRI ranging from 1.17 m/km to 4.65 m/km were selected. Each panel boarded a passenger car and evaluated the riding quality with grades from 0 to 10, and assessed whether it was satisfied or not. After removing outlier results using a box plot technique, 964 results were analyzed. An ANOVA was conducted to evaluate the effects of panel expertise, age, driving experience, vehicle ownership, and gender on the evaluation results. In addition, by using the receiver operating characteristics (ROC) curve, the MRI value, which can most accurately evaluate the satisfaction with riding quality, was derived. Then, the compatibility of MRI was evaluated using AUC as a criterion to assess whether the riding quality was satisfactory. RESULTS: Only the age of the panel participants were found to have an effect on the riding quality satisfaction. It was found that satisfaction with riding quality and MRI are strongly correlated. The satisfaction rate of roughness management criteria on new (MRI 1.6 m/km) and maintenance (MRI 3.0 m/km) expressways were 95% and 53%, respectively. As a result of evaluating the roughness management criteria by using the ROC curve, it was found that the accuracy of satisfaction was the highest at MRI 3.1-3.2 m/km. In addition, the AUC of the MRI was about 0.8, indicating that the MRI was an appropriate index for evaluating the riding quality satisfaction. CONCLUSIONS: Based on the results, the distribution of the panels’age should be considered when panel rating is conducted. From the results of the ROC curve, MRI of 3.0 m/km, which is a criterion of roughness management on maintenance expressways, is considered as appropriate.

본 논문에서는 문턱치 기반의 영상처리 알고리즘을 이용한 인셀(in-shell)헤이즐럿과 셀드(shelled)헤이즐럿의 분류 방법을 제안한다. 헤이즐럿은 외피가 있는 인셀 형태, 내피만 있는 셀드 형태, 내피도 제거된 블랜치드 (blanched)형태, 그리고 모든 껍질을 제거한 후 알맹이를 볶아 판매하는 로스티드(roasted)형태로 제품화 된다. 그러나 생산, 이송과 가공 과정에서 외피가 쉽게 박피되기 때문에 각 단계별로 제품을 판매하기 위해서는 일차적으로 인셀 헤이즐럿과 셀드 헤이즐럿을 구별하여 제품화하는 것이 필요하다. 따라서 본 논문에서는 각 단계의 헤이즐럿 표면에 대한 영상처리 기반 분석을 바탕으로 18개의 문턱치 기반의 선별인자를 얻고 이를 바탕으로 실시간 선별이 가능한, 인셀 및 셀드 헤이즐럿의 분류 알고리즘을 제안한다. 제안한 방법을 선별에 적용한 결과 인셀 헤이즐럿의 선별 정확 도는 98%이며 나머지 셀드 헤이즐럿의 선별 정확도는 94%를 보였다.

This study was conducted to investigate visual threshold of nigro (Cichlasoma nigrofasciatum) on white LED light. Thevisual threshold was obtained by analyzing electrocardiogram (ECG) of the nigro. 5 individuals (body weight: 15.62~45.49 g; TL: 8.9~12.4 cm) were trained for lights by an electric stimulus. And then the heart rate (beats/10s) before and after switching on the light were compared. Light intensity range was from 0.00 to 226.4 lux. Average heart rate was 10.36 beats/10s in the normal condition. When the fish perceived the light, the heart rate was decreased. Visual threshold of the fish was 2.59 lux.

We address improved plant image segmentation based on histograms which requires using a vegetation index and threshold. Image segmentation is the most important step for extracting targets, such as vegetation, from images; this affects successful detection of plant information. Forty-two field images were acquired from a soybean field using an RGB camera. Through K-means clustering analysis, we built a new vegetation index        and generated gray-scale images. Otsu and Triangle thresholds were used to convert contrast images to binary. Optimal threshold values were generally located between the Otsu and Triangle threshold values. The combined threshold method shows 98.79% and 0.95% of mean accuracy and standard deviation, respectively, whereas the Otsu and Triangle method results show 98.17±1.71% and 97.85±1.87%, respectively. These results show that the combined method has significant segmentation potential through one-way ANOVA. Then we compared the results with K-means clustering using two-sample t-test. The K-means method’s mean accuracy is 98.18±1.79%, with no significant difference between the proposed and K-means methods. However, the proposed method’s processing time is 0.60±0.01 s, i.e., twice faster than the K-means method (1.72±0.24 s).

This study was conducted to estimate the control thresholds (CTs) at different larval densities of Oides decempunctatus Billberg (Coleoptera: Chrysomelidae) of Campbell early in the vineyard and investigated life cycle. Each stage of O. decempunctatus was sampled 18 times from May to September in 2010~2012. The seasonal occurrence of O. decempunctatus showed the highest peak in mid-late June and mid-late August. Overwintered O. decempunctatus's eggs were hatched from late May to early June. Larva period was from late May to mid July and adults appeared in mid July. The percentage of leaf damage (Y) of Campbell early inoculated by different densities of O. decempunctatus (X, no. of larvae/fruiting mother branch) for six weeks was estimated by Y= 0.498X+2.041 (R2=0.988) during vegetation period. The decreasing rate of soluble solid (Y) after grape harvest of Campbell early damaged by different densities of O. decempunctatus (X) was estimated by Y= - 0.046X+15.3 (R2=0.8543). Based of the relationships between the densities of O. decempunctatus larvae and the index of reducing soluble solid of Campbell early, the number of larvae (2nd to 3rd instar) which decreased less than 15°Bx loss of soluble solid was determined as the injury level of 7/fruiting mother branch.

Economic injury level and control thresholds for the management of beet army worm, Spodoptera exigua (Lepidoptera: Noctuidae) were evaluated on chinese cabbage of two different planting time. Two inoculation times were tested for each planting and the number of inoculated larva was 10, 20, 40, 80, respectively. Damages of leaves by first inoculation were 63.2% after eight days planting on 80 larva inoculation plot. By the second inoculation, those were below 50% after 20 days planting on the end of September. The linear relationships between population density and yield reduction were as following, Y = -10.62x + 867.9 (R² = 0.643) for 5 days and Y=-6.432x + 1074 (R² = 0.720) for 20 days. Based on these results the economic injury level was 5.4 larva for five days and 9.0 larva for 20 days per 20 chinese cabbage. The control thresholds calculated by 80% level of economic injury level were 4.3 and 7.2 larva, respectively.

This study was conducted to estimate the control thresholds (CTs) of imported cabbage worm, Artogeia rapae L., injuring Chinese cabbage. The second instar larvae of A. rapae were inoculated with five density levels on each Chinese cabbages transplanted three weeks earlier under greenhouse condition, and checked injury rates after allowing their feeding for one week and two weeks, respectively. The average leaf area consumed by single larvae was 657.7 ㎟ in plots inoculated at three weeks after transplanting (WAT) and 2495.8 ㎟ in plots at 6-WAT, respectively. In the field experiment, different numbers of A. rapae ranged from one to seven larvae were inoculated on 20 plants. The percent yield reduction (Y) of Chinese cabbage infested by different densities of A. rapae (X) for a three-week period was estimated by the following equation, (1) Y=1.764X-0.3049 (R²=0.9901) in plots inoculated at 3-WAT, and (2) Y=1.0305X-0.2976 (R²=0.9398) in plots inoculated at 6-WAT. Based on the relationships between the densities of A. rapae larvae and the yield index of Chinese cabbage, the number of second instar larvae which caused 5% loss of yield (gain threshold proposed by Japan), was estimated as 3.0 per 20 plants for the 3-WAT and 5.1 for the 6-WAT.

Pyrausta panopealis is the major pest in green perilla. The larva weaves a web on the shoot of green perilla and damages. In case of extreme, The larva cuts the main branch of green perilla and the leaf of green perilla isn’t harvested anymore. A field study was conducted to estimate economic injury levels (EILs) and control thresholds (CTs) for P. panopealis injuring green perilla in green-houses. Different densities of P. panopealis ranged from 1 to 20 crops (2 units per crop) per 100 crops on 13. June, early inoculation. The number of injured leaf and the rate of injured crop were increased by 23. June, on the other hand were decreased after that day. Also, the amount of yield sow the same result above. The economic loss time calculated by the ratio of cost managing this moth to market price (C/V) (C: cost managing a moth, V: Market price) was 4.0%. The economic injury level was 5.1 larval per 100 crops. The control thresholds calculated by 80% level of economic injury level was 4.1 larval per 100 crops.

Control thresholds for the management of beet army worm, Spodoptera exigua (Lepidoptera : Noctuidae) were evaluated on welsh onion of two different planting time. Two inoculation times were tested for each planting and the number of inoculated larva was 5, 10, 20, 40 per twenty plants. The injured rate of leaves was 33.5% to 10.9% at 7th September at 40 to 5 larva inoculation plot on the five days planting. That of leaves was 20.5% at 40 larva on the twenty days planting. The yields of welsh onion on non-inoculation plot were 4,395 ㎏ per 10a. The rate of reduced yields was 49.2%(1,774.2 ㎏) and 36.5%(2,220.5 ㎏) at 40 larva inoculation on the 5 and 20 days planting, respectively. The linear relationships between population density and yield reduction were as following, it was Y=-43.474X + 3419.6 (R² = 0.9698) for 5 days and Y=-32.977X + 3518.9 (R² = 0.9928) for 20 days. Based on these results the control threshold level was estimated to be 1.8 larva for 5 days and 4.6 larva for 20 days per 20 plant. The more damaged leaves by S. exigua larva, the more yield reduction on welsh onion.

According to the preceding survey on insect pests of the green perilla, Perilla frutescens var. japonica HARA, The major pests were Aphis egomae Shinji, Pyrausta panopealis (Walker), Tetranychus urticae Koch, Polyphagotarsonemus latus Banks, Tetranychus kanzawai Kishida at Guemsan, Chungnam, 2004. Aphis egomae causes nearly 100% injury of the green perilla in uncontrolled green houses. A field study was conducted to estimate economic injury levels (ElLs) and control thresholds (CTs) for A. egomae injuring green perilla in green houses. Different densities of A. egomae ranged from 1 to 80 aphids per 100 plants in early inoculation. The mean injurying rate of plant was 2.4% to 40.5% at the end of June at differently inoculated levels. The economic loss time calculated by the ratio of cost managing aphid to market price (C/V) (C: cost managing aphid, V: Market price) in early season (from May to 13. June) was 5.8% and in peak season (from 13. June to 30. June) was 9.3%. Economic injury level in early and peak season was 5.3 aphids per plant and economic injury levels in peak season were 0.6 aphids per plant and 7.6% injured rate of plant. The control thresholds calculated by 80% level of economic injury level in peak season were 0.5aphids per plant and 6.1% injury rate of plant, respectively.

It is well known that fish hear a wide frequency range of sound using both laterial line and inner ear, and the sound is probably the most effective channel for long-range communication underwater than any other stimulus.The auditory threshold of svenband grouper, Epinephelus septem fasciatus was determined by conditioning method using a sound coupled with electric shock in a tank. The audio-signals and electric shock used in the experiment were pure tones of 100 to 1000Hz and DC 6n.The response of fish to the sound was observed by ECG intervals from precordial leads method (V1·V2 method). The auditory threshold curve for sevenband grouper was V-shaped, with most sensitive threshold at 350Hz in the range of 100~1000Hz. The Sevenband grouper were more sensitive to sounds of 200~400Hz than to adjacent frequencies.

This paper is second part on the auditory thresholds and fish behaviors to the underwater sounds for luring of target species at the set-net in the coast of Cheju. In order to obtain the critical ratio of yellow tails(Seriola quinqueradiata) and the emission level of underwater sound for luring of them, we make experiments to measure the auditory threshold of them using conditioning with electric shock. In state that the white noise with 10dB higher sound pressure level than ambient noise is emitted, the auditory thresholds of yellow tails are measured with 100~116.5dB and they are higher than those in state of no emission of white noise by the masking effects of it. Although sound pressure level of background noise go down, the auditory thresholds go up with frequency above than 300Hz.The critical ratio of yellow-tails in frequency of 80Hz, 100Hz, 200Hz, 500Hz, 800Hz are 46dB, 40dB, 50dB, 52dB, 60dB, 70dB respectively. The sound pressure level of which the signal sound is recognized by yellow tails under the ambient noise is above 100dB and the critical ratio of them is above 40dB.

최근 건설되는 특수교량에는 상시적인 유지관리 체계로서 계측시스템이 활발히 도입되고 있는 상황이다. 일반적으로 계측시스템 을 이용한 교량 유지관리 시에는 관리기준치를 설정하여 교량의 상태를 평가하게 되지만, 관리기준치 설정 기준과 방법이 없어 설계허용값에 근거하여 단순하게 설정되고 있는 실정이다. 기존의 방법으로 설정된 관리기준치를 적용할 경우 관리기준치 범위 내에서 발생된 이벤트, 이상 거동 및 점진적으로 발생하는 손상 등과 같은 교량의 상태변화를 파악하기에는 한계가 있다. 따라서, 본 연구에서는 기존의 절대치 관리에 있 어 관리기준치 설정의 문제점을 고찰하여 실무에 효과적으로 적용가능한 개선된 관리기준치 설정 및 운영방법을 도출하였다. 개선된 관리기 준치 설정을 위해 검벨분포를 사용한 확률론적 접근방법을 도입하여 재현빈도 50년, 100년의 기댓값에 대한 교량의 주의, 경고치를 산정하였 다. 본 연구에서의 관리기준치는 설계허용치 범위 내에서 발생하는 이상거동을 감지할 수 있도록 계측데이터와 계측데이터의 구간변화량에 대한 관리기준치를 각각 설정되었으며, 제안된 방법으로 산정된 관리기준치는 실측 데이터에 대입하여 비정상적인 데이터의 발생여부를 적절 하게 파악할 수 있다는 것을 확인하였다.

Maintenance of plant facilities are becoming important due to lots of recent plant construction. While maintenance of plant facilities are performed, maintenance of plant structures are usually not carried out properly. In this paper, measurement threshold estimation algorithm is developed for maintenance of pipe-rack structure. Currently, field verification of the developed algorithm is being performed on a real pipe-rack structure.