이 연구는 임도 개설 전·후 년차별로 식물상과 식생의 변화를 분석하고 관리 방안을 제공하기 위하여 전북 무주군 설천면 미천리에 소재한 민주지산 임도를 대상으로 임도 개설 전년도인 2012년부터 임도 개설 후 2022년까지 7차례에 걸쳐 수행되었 다. 임도 개설 조사구간 내의 식물군락은 북서사면에서 신갈나무군락, 남서사면에서 굴참나무군락과 일본잎갈나무군락으로 구분되어 남서사면과 북서사면에서 군락의 차이를 보였다. 임도 개설 전·후 년차별로 식물상의 변화는 임도 개설 전인 2012년 도 총 66분류군(44과 59속 51종 13변종 2품종)에서 2015년도에는 207분류군(71과 153속 176종 27변종 4품종)으로 141분 류군이 증가하였고, 2022년도에는 278분류군(78과 172속 242종 1아종, 31변종 4품종)으로 212분류군이 증가하였다. 특히 임도절토사면과 임도연접사면부의 조사구에서는 년차적으로 높은 식피율과 새로운 분류군의 증가를 보였는데, 이는 임도 개설에 따른 광량의 급격한 증가와 귀화식물 및 1년생 초본류의 유입으로 인해 일어난 현상으로 사료된다. 임도 개설 10년후 연차적으로 조사된 식생 조사 결과를 보면, 임도 개설 초년도에는 식피율과 종수가 빠른 속도로 증가하다가 일정 기간이 경과 하면 식피율과 출현 종수는 줄어들고 안정된 숲이 형성되어 우점종의 비율이 증가하였다. 특히 임도연접사면에서 관목층 과 초본층을 살펴보면, 임도 개설 직후 몇 년간은 초본층의 식피율이 현저히 증가하다가 시간이 경과 할수록 초본층의 피도는 감소하고, 관목층의 피도가 현저히 증가하였다. 그리고 임도산지사면에서는 초본층과 관목층의 피도는 현저히 감소하고, 아교목층과 교목층의 피도가 증가하였다.

In the past, measures for the reduction of industrial accidents has led the safety and health policy of construction sites by the guidance, supervision and the regulation according to「Occupation Safety and Health Act」handled by Ministry of Employment and Labor (MOEL). Nowadays companies realize that due to the factors such as diversification of employment types, outsourcing of hazardous work, new construction method and complicated types of construction, etc., there is a limit on safety management for construction sites as far as it is passively led by the governmental safety management policy and regulation. In this study, in order to practice the autonomous safety management escaping from the government-led safety management, improvement plans are proposed and applied by analyzing the basic cause of the all kinds of fall accidents that could possibly occur in the apartment construction sites and by verifying the hazardous factors and risks by fields.

정부와 안전보건공단에서는 건설현장의 안전사고를 줄이기 위하여 감독․점검, 기술지도, 재정지원 등의 산업재해예방 활동을 지속적으로 수행하여 왔다. 하지만, 전체 산업의 사고사망만인율과 재해율이 전반적으로 감소 추세에 있는 반면에, 건설업의 사고사망만인율 및 재해율은 2014년 이후 오히려 증가 추세에 있다. 특히, 2016년 재해통계를 기준으로 전체 건설업 재해자의 약 70%가 공사금액 20억 미만의 소규모 건설현장에서 발생하였다. 이러한 소규모 건설현장의 재해를 줄이기 위해서는 현재의 산업안전보건법 상의 소규모 건설현장 산업안전보건관리체제와 고용노동부 및 안전보건공단에서 수행하고 있는 소규모 건설현장재해예방 사업에 대한 실효성을 파악하고 개선할 필요가 있다. 현 산업안전보건관리체제에서는 건축공사 기준으로 120억 이상인 공사인 경우 안전관리자를 의무 선임하도록 되어 있으며 3억에서 120억 미만 공사의 경우 재해예방지도기관의 기술지도를 받도록 되어 있다. 또한, 안전보건공단에서는 민간위탁기관을 지정하여 3억 미만 건설공사의 안전관리를 지원하고 있으며, 클린사업장 조성지원사업을 통해 20억 미만 소규모 건설현장의 추락재해예방을 위해 시스템 비계, 사다리형 작업발판 및 안전방망 등의 설치 비용을 지원하고 있다. 본 연구에서는 공사금액별 재해통계 및 안전관리자 선임관련 제도를 분석하여 안전관리자 선임 대상을 현행 건축공사 120억 이상인 공사에서 단계적으로 50억까지 확대할 것을 제안한다. 설문조사와 전문가 의견을 수렴하여 재해예방지도기관의 기술지도 영역을 조정하고 실효성을 강화하기 위한 방안을 수립하고, 클린사업장 조성지원사업의 사업 확대 요구 및 개선사항을 도출한다.

This study attempted to establish fire risk factors and preventive measures for each of five major types of construction, focusing on construction sites. For this purpose, disaster cases were analyzed and countermeasures were prepared. In addition, fire risk factors and flammable and combustible materials by construction type according to construction process were identified and preventive measures thereof were suggested. The results of this study can be used to establish policy improvement directions that meet various educational needs and expectations by identifying the use status of flammable and combustible materials and figuring out the fire risk factors according to the process by work type in construction sites.

This study is intended to evaluate a risk of overseas construction companies. To achieve this, a survey was empirically carried out to overseas construction site experts. The results were as follows. The relative importance of parent factors showed that‘social culture’(0.157) was the highest, followed by ‘institutional regulation’(0.150),‘environment’(0.145),‘productivity’ (0.142),‘economic finance’(0.137),‘market condition’(0.136) and‘political policy’(0.133). As for the above-mentioned findings, the most important risk factor in overseas construction was social culture of entry countries, followed by construction-related legal system. All construction companies, contractors and design companies said that social culture was the most important parent factor, varying from construction industry. And they said that workforce availability was also the most important in the importance of sub-factors, followed by conflict due to the differences in lifestyle. Consequently, it is important to manage risk for socio-cultural factors in overseas construction, risk for double workforce, and risk for the differences in thinking or lifestyle by the participation of multinational workforce.

In the construction sites, rush (speedy construction) work have recently been overused because of budget reductions by reducing the construction duration after the long-term economic recession and construction business stagnation with institutional change including the instruction of the duration shortening bidding system and the introduction of the post-construction sales system by the Korea Research Institute for Human Settlements. Due to this, negligent accidents have frequently occurred by forcing manpower, equipment, finance, and material procurement and pressing ahead with impractical construction wok at night according to the reduction of construction schedules. Therefore, this paper has the necessity of this study to seek for alternatives to prevent negligent accidents by finding factors related to rush work in the reality that the importance for preventing negligent accidents is more emphasized while they have not been reduced in construction sites.

The objective of this study is to improve safe execution of the management plan in Construction Technology Promotion Act. This research addresses the issue how to prevent the collapse of facilities under construction and after completion, improve the examination system, and execute Improvement of Safety Management Plan. To achieve this goal, research providing insights into understanding the ways in which creating and presenting safety checks and deploying safety training measures effectively is imperative.

Many fatal and non-fatal injuries occurred as a result of unexpected falls from horse scaffolds during structural or finishing works such as painting, plastering, or plumbing. Therefore, this study is to improve safety standards for horse scaffolds used mostly in the interior finishing works. But hazard elements for the horse scaffolds has not been specifically identified. This study has analyzed the accidents of horse scaffolds to prevent construction accidents and the characteristics of a serious accidents related the horse scaffolds. It was suggested a safety management plan and a group of accidents characteristics. The results of this study are expected to be utilized as basic data for prviding a reference related to the horse scaffolds and to be unified the regulations associated with the horse scaffolds.

This study analyzed the safety management efficiency through input-oriented BCC Model using DEA by making of Models, in which this study selected the number of staff affiliated with the construction site, number of staff members on the construction team, and number of safety personnel as Input Factor, along with the number of disaster victims and zero-accident accomplished hours as output elements, targeting 40-or-so apartment building construction sites which are being built by 3 domestic construction companies. As a result of efficiency, it was 0.643, the number of efficient DMU was 4. In the aspect of returns to scale, 21 construction sites(52.5%) found to be in a state of increasing returns while 14 construction sites(35%) was in a state of Decreasing returns. The reason for inefficiency was found to lie in technical factors in case of 30 construction sites(75%). Lastly, inefficient DMU is in need of 38.9 % and 66% reduction in site personnel and safety personnel. Based on study results, the 29 construction sites accounting for 72.5% of DMU for safety management efficiency evaluation object turned out to do inefficient safety management that doesn't fit the size of each company.

Total accident rate in the construction industry is a very meaningful reduction to establish a comprehensive disaster reduction measures, including through the Survey, the disaster prevention projects whilst driving status and problem analysis in order to reduce the mature workers in the construction industry is growing rapidly in all disaster disasters (share) The days. It is urgent to establish a framework and measures that can identify the specific cause for this than for the middle-aged workers and disaster reduction in disaster reduction efforts, which continue to increase. Used as measures of information and data presented in the basic requirements of mature workers also been.

PURPOSES: The purpose of this study is to develop a methodology to prioritize sidewalk construction on rural national highways. METHODS : In order to determine an appropriate prioritization for sidewalk construction, we developed a specific methodology. The proposed methodology includes three main steps: 1) Analytic Hierarchy Process (AHP) methods, 2) Subjective evaluation of relevant road agencies for the candidate sidewalks along rural national highways, and 3) Field study conduction. Each step has four phases. The primary feature of this methodology is the addition of expert consultation and survey data, as well as a field study. In addition, the method could guarantee flexibility in selection for evaluation criteria. As a result, the proposed methodology could be used as a general procedure for application to other roadway classifications when considering sidewalk construction. RESULTS: In order to demonstrate the reasonableness of the proposed methodology, a case study was performed for exactly 100 candidate sites for sidewalk construction on rural national highways. All required evaluation scores were properly produced for each candidate site. By doing so, decision-makers can determine the priority for sidewalk construction at these sites by reviewing quantitatively and qualitatively considered data. CONCLUSIONS: The results of the case study can be applied to a long-term fundamental plan for sidewalk construction on rural national highways. Furthermore, this methodology could be employed to prioritize a small-scale SOC project(e. g. bicycle or pedestrian roads).

The large-sized, complex, and multi-storied construction industry caused the increasing construction amount together with insufficient skilled workers to increase the probability of occurring accident , resulting in the most construction accidents next to manufacturing industry. Death accidents have risen to serious level, compared construction industry with manufacturing industry along the numbers of workers. Due to the main feature of one-time industry receiving orders, open-air dispersed production activity and the long-complex production process, the continuous efforts to prevent and manage safety accidents were made but the results were of no effect. They didn't deeply analyze the falling accidents that consist of half death accidents in construction industry. This study has classified in detail Missteps, Slip, Trip, Unstability and the others on the basis of gait characteristics, occurrence types, frequency and intensity of death accidents. This study suggested the effective methods on the construction safety management according to the causes of falling accidents. This study will be expect to be used as the basic data in the procedure and the program of safety management.

According to the statistics of occupational injuries in 2013, the work platforms were main objects causing fall injuries in construction sites. But many scaffold and platform workers use and install the work platforms and the fixed and mobile scaffolding without considering about safety and health standards. We had done a nationwide survey about how the platform workers obey safety and health standards. As the result of this survey, in order to ensure the safety of the work platforms, we founded that the platform workers must obey the safety and health standards when using and installing the work platforms. To improve the safety and health conscious of the workers, it needs to educate a worker on safety and health standards for work platforms. Also, to effectively prevent constructin injuries for the work platforms, it is rextricted for workers to use only safety certified work platforms. And, before installing and using work platforms, it needs to make a work plan for work platforms and obey it.

Share of total accidents in construction accidents construction site accident 70% of small embroidery Reducing the rate of Construction of the entire construction accidents decreased overall is a very meaningful work. Disaster reduction continues to increase despite the efforts of a small construction site(Amount less than 2,000,000,000) for Disaster Reduction In order to identify more clearly the cause of the system and provide the urgently needed measures.

Construction victims have increased year by year. Disaster proportion is also increasing continuously. Looking over the causes of disasters by each type of work, fall from working platform indicate the highest rate above all so that it is urgently required to set up safety measures. This study is to grasp the present status of construction accidents, to identify areal characteristics of the top 20% accidents on the basis of working platforms with the highest accident rate, to grasp the causes of accidents after their analyses, and to present methods to reduce casualties related to working platforms. As measures to reduce construction disasters, this study proposes to improve safety management and training on working platforms, to complement safety regulations, and to better performance including the development and expansion of certified products suitable for safety regulations.

During five years (Year 2009~2013), Total victims of 72 %( 81,560 people) and those 50.6 %( 1,258 people) of death accident occurs in small scale construction site which operate 2 million USD less construction budget. Especially, falling death accident account for 785 people, in the share of 33.2 %( 261 people) death disaster takes due to defect of original cause materials. The major safety issues in small scale work place take place while scaffold installation, disassembling, work-plate improper installation or non-professional skills of workers. Furthermore, labor subcontract systems make small construction site shortage of resources. Those workers regard work-plate as unnecessary and consumables supplies. Because of that most of workers use unsafe workplace in most construction site. Therefore, in order to prevent falling accident occurring in small scale work site, government should organize related regulations such as “Work site safety construction method” and then expands education support, financial aid, and sourcing safety supplies for work plate which offer broad variety experiences. Also, introduce certificate solutions for various work plates to improve safety function such as anchoring type method and anti sliding function.

Jeongrimsaji as temple remains of Baekje Sabi period, its re-excavation has been carried three times in full scale. As a result, the buildings in left and right of lecture hall was largely identified in 3 forms. First, layout of small buildings in left and right of lecture hall. Second, layput of corridor in left and right of lecture hall. Third, layout of construction site in the north of corridor in left and right of lecture hall. Above second is included into remains of Gorye, the third is included into remains of Baekje - the remains were almost ruined then. The first form and third form in above is different each other in size of buildings, form of layout, and location. It is important to investigate these points: the time of constructing the buildings; what position have the use and function of the buildings in the temple? ; transition process of layout of the Buddhist temple. In this context, of temple remains in Baekje during the 5~7th century, the cases where construction sites in left and right of lecture hall and construction site in the north of corridor are identified, have been reviewed. Based on this review, the use and function of buildings, their transition process were investigated. The survey results show that small buildings in left and right of lecture hall existed in the middle and later period of the 6th century. During the later 6th century ~ the 7th century, construction site in narrow and long square shape was located in left and right of lecture hall instead of small buildings in the north of corridor. Therefore, it is identified that the aforementioned thing is earlier stage and the latter thing is later stage.

The wooden pagoda sites which have been confirmed in Baekjae's former territory so far have flattened surface of the earth or foundation pert made by digging up the earth. In particular, the latter is found more often in the pagoda sites of Baekjae, which is essential and absolutely necessary because of the characteristics of pagoda structure. The wooden pagoda sites with foundation part made by digging up the earth under the stylobate are found at Yongjeongli ruined temple site of Woongjin area, and at Neung-sa temple site, Wangheung-sa temple site, Geumgang-sa temple site, and Mireuk-sa temple site of Sabi period. They are also observed at Hwanglyong-sa nine-storied wooden pagoda of Shilla and at Biin five-storied stone pagoda of early Goryeo. They are important data improving that the construction technologies of Baekjae continued to be applied to build stone or wooden pagodas, transcending time and space. Recently, the site assumed as a wood pagoda site of Hanseong area was examined in Gyeongdang sect ion of Pungnap mud fortification. If this is proved to be a real wooden pagoda site, this digging-up construction technology of foundation part ann be concluded to be a traditional engineering technology of Baekjae which was frequently used from Hanseong period to Sabi period. On the other hand, this digging-up construction technology of foundation part has been found only at pagoda sites and main building sites of temple ruins, and it helps examine their symbolism.

국내 아스팔트 포장은 중차량 교통량의 증가와 겨울철 및 여름철의 온도차이가 크게나는 환경조건하에서 공용되고 있다. 이러한 요인으로 인하여 포장 조기파손의 대부분인 소성변형의 문제점이 심각하며, 이에 대한 개선책으로 개질 아스팔트의 적용에 대한 연구들이 활발하게 진행되고 있다. 그러나, 대부분의 개질 아스팔트의 사용이 표층을 절삭하고 택코팅후 시공되고 있으며, 신설도로의 포장이 아닌 유지보수에서 많이 사용되고 있다. 본 연구는 부산지방국토관리청 산하의 신설국도의 도로포장현장에 개질 아스팔트 혼합물이 적용된 기층 위에 표층용 개질 아스팔트인 SBS PMA 혼합물과 PSMA 혼합물에 대하여 2차로로 200m를 시험 시공하였으며. 나머지 구간은 일반밀입도 아스팔트 혼합물로 시공하였으며, 시공에 사용된 재료에 대한 실내시험을 통한 공용성 및 장기 공용성 평가를 실시하고자 하였다. 실내 실험은 마샬안정도시험, 강도시험과 휠트랙킹 시험을 하여 분석하였으며, 현장의 시험 시공시 온도관리 및 평탄성에 대한 평가를 기초로 향후 장기 공용성 평가와 LCC 분석을 실시하여 가장 경제적인 개질 아스팔트를 평가하여 설계에 반영하고자 한다.