Zona pellucida (ZP), a primarily representative coat of mammalian egg and embryo, has an extremely heterogeneous morphology during different developmental stages. The objective of the present study was to compare the morphological changes of the ZP surface of immature, in vitro and in vivo matured canine oocytes by using scanning electron microscopy (SEM). Canine ovaries were collected from local veterinary hospitals to recover immature oocytes. The ovaries were sliced and the released cumulus oocyte complexes (COCs) were washed with TL-HEPES. The selected COCs were randomly divided into two groups, first group was processed immediately at immature state and the second group was processed 72 h after in vitro maturation, and compared with in vivo derived oocytes. Oocytes were fixed, critical point dried and examined under SEM. The diameters of oocyte and outer holes of the ZP were measured on a total of 249 oocytes; the results were analyzed using One-way ANOVA. Our results showed that, the diameter of immature oocytes significantly differed (p < 0.05) from that of in vivo matured oocytes (79.60 ± 0.77 μm vs. 101.46 ± 1.07 μm, respectively). Similarly, a significant difference (p < 0.05) in the diameters between those of in vitro and in vivo matured oocytes were found (79.51 ± 2.36 μm vs. 101.46 ± 1.07 μm, respectively). Moreover, the diameters of the outer holes of the ZP were significantly (p < 0.05) larger in in vivo matured (1.48 ± 0.42 μm) than in vitro matured for 72 and immature oocytes (1.10 ± 0.16 and 0.43 ± 0.12 μm, respectively). Taken together, these data indicates that the ZP surface is related to oocyte maturity in canine.

흑요석 내 미세결정은 화산암질 마그마의 과냉각 조건에서 정출된 아주 작은 결정이다. 백두산, 일본 규슈와 홋카이도, 그리고 이태리 리파리 섬에서 산출되는 흑요석을 대상으로 그 내부에 포함된 미세결정의 형태와 조직을 전자현미경을 사용하여 관찰하여 정리하였다. 전자현미경의 후방산란전자 이미지로부터 관찰한 보다 자세한 미세결정에 대한 형태학적 분류는 기존의 광학현미경으로 얻을 수 없는 미세결정의 결정화에 대한 정보를 제공해 준다. 이 논문에서는 Clark (1961)의 미세결정 형태 분류 14가지 중에서 10가지에 대해 새로이 기재하였다. 즉, Lath, Crenulite, Bacillite, Margarite, Belonites, Trichites, Arculites, Furculite, Scopulites, Scopulitic growth 등의 미세결정에 대한 형태와 조직적 특징을 구체적으로 살펴보았다. 이런 기재적 연구로부터 향후 산성 마그마의 냉각과정동안 흑요석 내 미세결정의 결정작용과 광물 공생관계를 밝히는데 활용될 것이다.

The electronic and optical characteristics of molybdenum disulphide (MoS2) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of MoS2 layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the MoS2 layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the MoS2. Optical microscopy works only when MoS2 is on a silicon substrate covered with SiO2 of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of MoS2 layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of MoS2 layers. This method can be used to characterize MoS2 samples at nanometer-level spatial resolution, which is below the limits of other methods.

OBJECTIVES : In this study, microstructural components of crumb rubber modified asphalt (CRMA) binder were investigated using environmental scanning electron microscope (ESEM). To clearly understand the elemental composition of the CRMA binder, energy dispersive X-ray spectroscopy (EDX) was employed on the ESEM samples. METHODS: CRMA binders were produced using open blade mixers at 177℃ for 30 min. The binders were artificially aged through a series of accelerated aging processes. Sample preparation was done by making a mold shape on the glass slide. Thereafter, the morphology of the CRMA binder was observed using the ESEM coupled with the EDX. RESULTS : The images captured from the ESEM indicate that the unaged CRMA binder appears to have a single-phase continuous nonuniform structure after the addition of crumb rubber particles, whereas the artificially aged CRMA binder was observed to have two different phases. ESEM coupled with EDX shows detailed internal structure of the modified binders compared to other technologies (i.e., optical microscopy, atomic force microscopy, and conventional scanning electron microscope). CONCLUSIONS: The captured images resemble the internal structures such as the viscous properties of the unaged CRMA binder and the interaction between the rubber particles and the base binder at aged condition. ESEM is a powerful instrument and with the introduction of EDX, it provided more details of the network microstructure of the asphalt binder. ESEM coupled with EDX is recommended for use in future investigation of microstructure of asphalt binders.

4H- and 6H-SiC grown by physical vapor transport method were investigated by transmission electron microscopy (TEM). From the TEM diffraction patterns observed along the [11-20] zone axis, 4H- and 6H-SiC were identified due to their additional diffraction spots, indicating atomic stacking sequences. However, identification was not possible in the [10-10] zone axis due to the absence of additional diffraction spots. Basal plane dislocations (BPDs) were investigated in the TEM specimen prepared along the [10-10] zone axis using the two-beam technique. BPDs were two Shockley partial dislocations with a stacking fault (SF) between them. Shockley partial BPDs arrayed along the [0001] growth direction were observed in the investigated 4H-SiC. This arrayed configuration of Shockley partial BPDs cannot be recognized from the plan view TEM with the [0001] zone axis. The evaluated distances between the two Shockley partial dislocations for the investigated samples were similar to the equilibrium distance, with values of several hundreds of nanometers or even values as large as over a few micrometers.

Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.

Minimal inhibitory concentration (MIC) is the lowest concentration of antibiotics that inhibits the visible growth of bacteria. It has been reported that sub-MIC of antibiotics may result in morphological alterations, along with the biochemical and physiological changes in bacteria. The purpose of this study was to examine morphological changes of Aggregatibacter actinomycetemcomitans, after the treatment with sub-MIC metronidazole and penicillin. The bacterial morphology was observed with scanning electron microscope, after incubating with sub-MIC antibiotics. The length of A. actinomycetemcomitans was increased after the incubation with sub-MIC metronidazole and penicillin. Sub-MIC metronidazole and penicillin inhibited bacterial division and induced long filaments. Our study showed that metronidazole and penicillin can induce the morphological changes in A. actinomycetemcomitans.

This study suggested comprehensive structural characterization methods for the commercial blue light emitting diodes(LEDs). By using the Z-contrast intensity profile of Cs-corrected high-angle annular dark field scanning transmission electron microscope(HAADF-STEM) images from a commercial lateral GaN-based blue light emitting diode, we obtained important structural information on the epilayer structure of the LED, which would have beendifficult to obtain by conventional analysis. This method was simple but very powerful to obtain structural and chemical information on epi-structures in a nanometer-scale resolution. One of the examples was that we could determine whether the barrier in the multi-quantum well(MQW) was GaN or InGaN. Plan-view TEM observations were performed from the commercial blue LED to characterize the threading dislocations(TDs) and the related V-pit defects. Each TD observed in the region with the total LED epilayer structure including the MQW showed V-pit defects for almost of TDs independent of the TD types: edge-, screw-, mixed TDs. The total TD density from the region with the total LED epilayer structure including the MQW was about 3.6 × 108 cm−2 with a relative ratio of Edge- : Screw- :Mixed-TD portion as 80%: 7%: 13%. However, in the mesa etched region without the MQW total TD density was about 2.5 × 108 cm−2 with a relative ratio of Edge- : Screw- :Mixed TD portion of 86%: 5%: 9 %. The higher TD density in the total LED epilayer structure implied new generation of TDs mostly from the MQW region.

This study used transmission electron microscopy (TEM) to investigate the micro-morphological features of two formaldehyde to urea (F/U) mole ratio liquid urea-formaldehyde (UF) resins with three hardener levels as a function of the curing time. The micro-morphological features of the liquid UF resins were characterized after different curing times. As a result, the TEM examination revealed the presence of globular/nodular structures in both liquid UF resins, while spherical particles were only visible in the low F/U mole ratio resins. The high F/U mole ratio liquid UF resins also showed extensive particle coalescence after adding the hardener, along with the appearance of complex filamentous networks. When the resins were cured with a higher amount of hardener and longer curing time, the spherical particles disappeared. For the low mole UF resins, the particles tended to coalesce with a higher amount of hardener and longer curing time, although discrete spherical particles were still observed in some regions. This is the first report on the distinct features of the crystal structures in low F/U mole ratio UF resins cured with 5% hardener and after 0.5 h of curing time. In conclusion, the present results indicate that the crystal structures of low F/U mole ratio UF resins are formed during the curing process.

In this work, we report in-situ observations of changes in catalyst morphology, and of growth termination of individual carbon nanotubes (CNTs), by complete loss of the catalyst particle attached to it. The observations strongly support the growth-termination mechanism of CNT forests or carpets by dynamic morphological evolution of catalyst particles induced by Ostwald ripening, and sub-surface diffusion. We show that in the tip-growth mode, as well as in the base-growth mode, the growth termination of CNT by dissolution of catalyst particles is plausible. This may allow the growth termination mechanism by evolution of catalyst morphology to be applicable to not only CNT forest growth, but also to other growth methods (for example, floating-catalyst chemical vapor deposition), which do not use any supporting layer or substrate beneath a catalyst layer.

The studies on activated carbon prepared from walnut shell and groundnut shell were undertaken to ascertain the effect of initial state of precursor and activation process on the development of porosity in the resulting activated carbon. Walnut shell based carbon shows the presence of cellular pores while Groundnut shell based carbon shows fibrillar pore structure. The adsorption parameters, characterization of product and scanning electron microscopic studies carried out showed the presence of mainly Micro, Meso and Macro porosity in carbon prepared from Walnut shell while mainly micro porosity was observed in Groundnut shell based activated carbon. An interrelationship between the adsorption efficiency and porosity in terms of quality control parameters, for before and after activation, was validated through the scanning electron microscopic data.

MBS에 의해(001)GaAs기판 위에 성장된 Zn1-xCoxSe(x=1.0, 7.4, 9.5 %)반도체 박막과 (ZnSe/FeSe)반도체 초격자 박막의 미세구조를 투과전자현미경을 이용하여 연구하였다. Zn1-xCoxSe 박막 시편의 경우, 박막과 기판 사이의 격자 불일치때문에 a/2<110>형태의 버거즈 벡터를 가지는 부정합 전위를 관찰하였다. 모든 Zn1-xCoxSe 박막과 기판의 계면은 뚜렷이 구별되었고, 계면에서 산화물이나 이물질이 존재하지 않았다. 또한, (ZnSe/FeSe)초격자를 성장시키기 전에 GaAs기판 위에 ZnSe바닥층을 넣음으로써 고품질의 (ZnSe/FeSe)초격자를 얻었다. (ZnSe/FeSe)초격자에 있는 FeSe는 섬아연광 결정구조로 존재하였다.

고분해능 전자현미경과 컴퓨터 이미지 시뮬레이션이 La이 첨가되고 또한 첨가되지 않은 Pb(Mg/ sub 1/3/Nb23/)O3고용체의 미세구조를 연구하기 위해서 사용되었다. 불규칙격자 영역의 격자 이미지는 정방정 형태와 유사 육방정 형태를 각각 보였다. 규칙격자 영역에서 Mg과 Nb의 비화학양론적인 규칙격자 구조 현상이<111>방향에 따라 관찰되었다. 실험 격자 이미지와 컴퓨터 시뮬레이션 이미지의 비교로부터, 규칙격자 구조를 가지는 영역의 장거리 규칙도는 0.2-0.7의 값을 가지고 있었고, 또한 규칙격자는 (NH4)3FeF6결정구조를 가지고 있었다. 작은 값의 장거리 규칙도를 가지는 규칙격자를 가지는 영역에서, 변형률 파형이 관찰되지 않았다. 이것은 대부분 두 양이온이 그들의 위치에 있기 때문에, 원자 변위가 없었기 때문이다.

현재 우리나라에서 재배되고 있는 마늘은 오랜 세월에 걸쳐 바이러스 감염에 무방비상태로 방치된채 영양번식을 계속해 왔기 때문에 대부분의 품종들이 퇴화되어 있을 것으로 생각된다. 따라서 마늘의 단위수량과 질의 향상을 기하기 위해선 바이러스 무감염 씨마늘의 육성, 보급에 의한 품종경신이 불가피할 것으로 보인다. 본 연구는 우리나라 마늘 재배지대 전역에서 가장 많이 발생하고 있는 모자이크병을 대상으로 바이러스의 분리, 검정식물상의 반응, 전염방법, 물리적성질, 순화방법, 혈청학적반응 및 형태등을 조사함과 동시, 마늘 모자이크 바이러스의 적절한 검정방법을 구명하여 앞으로 바이러스 무감염 씨마늘을 육성, 보급하는데 필요한 기초자료를 얻을 목적으로 실시했으며 다음과 같은 결과를 얻었다. 1. 1970-1972년까지 3년간 전투의 주요 마늘재배지대를 조사한 바 우리나라에서 재배되고 있는 마늘의 거의 대부분이 모자이크병에 걸려있음이 관찰되었다. 2. 마늘 모자이크 바이러스는 Chenopodium amaranticelor에 즙액접종 함으로써 단일계통을 분리할 수 있었다. 3. 26종의 검정식물을 공시하여 마늘 모자이크 바이러스를 즙액접종한 결과, 접종 11-12일 후에 Chenopodium amaranticolor, C. quince, C. album, C. koreanse 등 4종 식물의 접종엽상에 r국부병반 반응이 나타났다. 나머지 식물들에서는 병징이 나타나지 않았을 뿐 만 아니라 C. amaranticolor에 역접종했을 때도 바이러스는 회수되지 않았다. 4. 즙액접종에 의해 국부병반 반응이 나타날 상기 4종 Chenopodium속 식물중에서 C. amaranticolor 와 C. quinoa는 반응이 설민하고 정확하기 때문에 마늘 모자이크 바이러스의 검정식물로 적당하다고 생각된다. 5. 감염주에서 유내한 종구와 주아는 모두 모자이크 바이러스에 감염되어 있었고 이들 감염종구와 주아를 통하여 전염되었다. 6. 마늘 모자이크 바이러스는 감염종구와 주아의 즙액에 의해서도 C. amaranticolor에 기계적 전염이 되었다. 7. C. amaranticolor 상에 계통분리된 마늘 모자이크 바이러스의 내열성은 , 희석한계는 , 그리고 보존한계는 2 일이었다. 8. 마늘 모자이크 바이러스의 순화는 2회의 분획원심과 Sephadex gel filtration에 의해서 가능했다. 9. 전자현미경하에서 관찰한 마늘 모자이크 바이러스는 길이 1200-1225mu 폭 10-12mu의 사상이었다. 10. 혈청학적 미량침강 반응법에 의해 마늘잎에서뿐만 아니라 인편과 주아에서도 마늘 모자이크 바이러스의 검정이 가능했다. 11. 우리나라 5개 지방에서 수집한 마늘 종구 150개와 주아 30개에 대해 혈청학적방법으로 마늘 모자이크 바이러스의 감염률을 조사한 결과 의 감염률을 보였다. 12. 마늘 모자이크 바이러스와 크기가 근사한 Potato Virus X. Potato virus Y, Potato virus S, Potato virus M 등과의 혈청학적 유연관계를 조사한 바, 마늘 모자이크 바이러스는 이들과 구별되는 다른 바이러스라고 생각된다. 13. 마늘의 모자이크 감염주에서 단일계통으로 분리하여 본 실험에 사용한 바이러스는 마늘의 바이러스 무감염주를 얻을 수가 없기 때문에 직접 마늘잎에 접종해서 모자이크톤의 병원이라는 것을 확인할 수 없었지만, 검정식물상의 반응, 혈청학적반응, 전자현미경적 관찰등의 간접적인 조사 결과로 미루어 미인록의 마늘모자이크 바이러스라고 생각된다.

생물체의 활동 특히 미생물의 활동은 직·간접적으로 전 지구적으로 분포하는 퇴적물 및 암석 내부 광물의 형성 및 변형에 영향을 주고, 일부는 특징적인 생물기원구조를 형성한다. 특히, 특징적인 생물기원구조에 분포하는 광물은 기존에 알려진 무기적 과정을 통하여 형성되기 어려운 환경에서 형성되기도 하고, 무기적 과정을 통하여 형성된 광물과는 다른 물성 및 특성을 나타낸다. 이러한 생물체의 영향을 받아 형성된 생물기원구조에 대해 연구·분석하는 것은 새로운 광물 형성 메커니즘을 규명하는데 필수적이라 할 수 있다. 따라서 본 논문은 심해저 망간각 및 해저열수분출공 지역 미생물 매트 시료를 예로 들어, 주사전자현미경 분석을 통한 자연환경에 분포하는 생물기원구조 관찰에 대해 소개하고 분석방법, 장점 및 활용에 대해 설명하고자 한다.

집속이온빔(FIB, focused ion beam)법은 광물 및 지질시료의 분석 대상 위치로부터 투과전자현 미경(TEM, transmission electron microscope) 관찰을 위한 박편을 정밀하게 제작할 수 있는 방법으로 널리 보급되고 있다. 그러나 박편 제작과정에서 Ga 이온빔에 의한 구조 손상이나 인위적 효과들이 발 생하여 전자빔에 의한 손상과 함께 TEM 분석에서의 난점들 중 하나이다. 광물 시료 FIB 박편의 TEM 관찰에서 석영과 장석의 비정질화, 커튼 효과, Ga 오염 등이 확인되었으며, 특히 입자 경계 부근 이나 두께가 얇은 곳에서 이들 현상이 보다 뚜렷하다. 박편 제작 시의 가속전압 및 전류 조정 등의 분 석절차 개선으로 이온빔 손상을 줄일 수 있으나, 어느 정도의 손상이나 오염은 피할 수 없으므로 TEM 박편 관찰과 해석에서 유의하여야 한다.