본 연구는 산업화 유망 식물인 회화나무의 이차대사산물 대량생산용 캘러스 확보에 필요한 기초조건을 확인하고자 수행하였다. 기내 배양한 회화나무 하배축을 2.0 mg·L-1 NAA + 0.1 mg·L-1 TDZ 배지에서 배양하였을 때 유백색의 부드러운 캘러스가 형성되었고, 캘러스 형성률 100±0.0%, 캘러스 형성에 걸리는 기간 7.1±0.03일, 캘러스 무게 249.8±12.73 mg으로 가장 효과적임을 확인하였다. 또한, 하배축에서 유도한 캘러스는 백색광 조건의 1.0 mg·L-1 IBA + 0.1 mg·L-1 TDZ 처리 배지에서 배양하였을 때 연노란색의 단단한 캘러스가 다량으로 형성되었고, 캘러스 생체중 186±5.4 mg, 면적 40.6±1.6 mm2으로 가장 무겁고, 크기가 우수한 것을 확인하였다. 기내 배양한 캘러스 소재 추출물의 추출수율은 50% 에탄올 추출 시 59%, 물 추출 시 54%로 확인하였고, 추출물 내 유효성분으로 마키아인 함량은 1.68 mg·g-1으로 검출되었다. 본 연구의 결과는 산업화 식물로써 유망있는 수종인 회화나무의 기내 대량증식과 이차대사산물 생산성을 향상할 수 있는 위한 기초자료로 활용할 수 있을 것이다.

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

To address the pressing societal concern in Korea, characterized by the imminent saturation of spent nuclear fuel storage, this study was undertaken to validate the fundamental reprocessing process capable of substantially mitigating the accumulation of spent nuclear fuel. Reprocessing is divided into dry processing (pyro-processing) and wet reprocessing (PUREX). Within this context, the primary focus of this research is to elucidate the foundational principles of PUREX (Plutonium Uranium Redox Extraction). Specifically, the central objective is to elucidate the interaction between uranium (U) and plutonium (Pu) utilizing an organic phase consisting of tributyl phosphate (TBP) and dodecane. The objective was to comprehensively understand the role of HNO3 in the PUREX (Plutonium Uranium Redox Extraction) process by subjecting organic phases mixed with TBPdodecane to various HNO3 concentrations (0.1 M, 1.0 M, 5.0 M). Subsequently, the introduction of Strontium (Sr-85) and Europium (Eu-152) stock solutions was carried out to simulate the presence of fission products typically contented in the spent nuclear fuel. When the operation proceeds, the complex structure takes the following form. 􀜷􀜱􀬶 􀬶􀬾(􀜽􀝍) + 2􀜰􀜱􀬷 􀬿(􀜽􀝍) + 2􀜶􀜤􀜲(􀝋􀝎􀝃) ↔ 􀜷􀜱􀬶(􀜰􀜱􀬷)􀬶 ∙ 2􀜶􀜤􀜲(􀝋􀝎􀝃) Subsequently, separate samples were gathered from both the organic and aqueous phases for the quantification of gamma-rays and alpha particles. Alpha particle measurements were conducted utilizing the Liquid Scintillation Counter (LSC) system, while gamma-ray measurements were carried out using the High-Purity Germanium Detector (HPGe). The distribution ratio for U, Eu (Eu-152), and Sr (Sr-84) was ascertained by quantifying their activity through LSC and HPGe. Through the experiments conducted within this program, we have gained a comprehensive understanding of the selective solvent extraction of actinides. Specifically, uranium has been effectively separated from the aqueous phase into the organic phase using a combination of tributyl phosphate (TBP) and dodecane. Subsequently, samples containing U(VI), Eu(III), and Sr(II) underwent thorough analysis utilizing LSC and HPGe detectors. Our radiation measurements have firmly established that the concentration of nitric acid enhances the selective separation of uranium within the process.

Tb3+-doped CaNb2O6 (CaNb2O6:Tb3+) thin films were deposited on quartz substrates at a growth temperature of 300 °C using radio-frequency magnetron sputtering. The deposited thin films were annealed at several annealing temperatures for 20 min and characterized for their structural, morphological, and luminescent properties. The experimental results showed that the annealing temperature had a significant effect on the properties of the CaNb2O6:Tb3+ thin films. The crystalline structure of the as-grown CaNb2O6:Tb3+ thin films transformed from amorphous to crystalline after annealing at temperatures greater than or equal to 700 °C. The emission spectra of the thin films under excitation at 251 nm exhibited a dominant emission band at 546 nm arising from the 5D4 → 7F5 magnetic dipole transition of Tb3+ and three weak emission bands at 489, 586, and 620 nm, respectively. The intensity of the 5D4 → 7F5 (546 nm) magnetic dipole transition was greater than that of the 5D4 → 7F6 (489 nm) electrical dipole transition, indicating that the Tb3+ ions in the host crystal were located at sites with inversion symmetry. The average transmittance at wavelengths of 370~1,100 nm decreased from 86.8 % at 700 °C to 80.5 % at an annealing temperature of 1,000 °C, and a red shift was observed in the bandgap energy with increasing annealing temperature. These results suggest that the annealing temperature plays a crucial role in developing green light-emitting CaNb2O6:Tb3+ thin films for application in electroluminescent displays.

Cordyceps militaris (C. militaris) is a unique and valuable medicinal fungus belonging to the Cordyceps species. C. militaris is the only fungus that contains cordycepin which is a biologically active compound. In previous studies, light-emitting diodes (LEDs) are known to be effective in increasing cordycepin content, but metabolic profiling of LED-stimulated C. militaris has not been confirmed. Metabolic profiling is essential to understanding the metabolic regulation of cordycepin. This study studied the physiologically active secondary metabolites of C. militaris according to the presence or absence of stimulation of LEDs through GC-MS analysis. Most of the metabolites were detected in both samples, but there was a clear difference in the detected concentration. In particular, C. militaris had a significant difference in amino acid levels when stimulated with LEDs. Our results suggested that LEDs could stimulate amino acid synthesis in C. militaris mycelium to increase the cordycepin content.

본 연구는 Tetraselmis suecica와 T. tetrathele의 영양물질 증진효과를 가져올 수 있는 배양시스템 구축을 위하여, 발광다이오드 (LED)의 파장별(청색; 450 nm, 황색; 590 nm, 적색; 630 nm) 탄수화물, 단백질, 지질 함량을 측정하였다. 두 종 모두 단백질 비율(42~69%)이 가장 높았으며, 생장속도가 낮았던 황색파장에서 탄수화물, 단백질, 지질의 높은 함량을 보였고, 생장속도가 가장 높았던 적색파장에서는 낮은 함량을 보였다. 이러한 결과는 세포 분열 속도의 감소로 인해 단백질 합성과 함께 세포의 화학적 조성과 효소 활동에 변화를 주어 지질과 탄수화물 함량이 증가한 것으로 생각된다. 따라서, T. suecica와 T. tetrathele의 유용한 생화학적 물질의 증대를 위해 대수생장기 초 기와 중기는 적색 LED 그리고 대수생장기 후기에는 황색 LED를 주사하는 2단계 LED 배양을 제안하였다.

안트라센의 골격을 갖는 청색 발광 물질, 9-(2-naphthyl)-10-(p-tolyl)anthracene (2-NTA)를 기본으로 하고, 오렌지 도판트인 루브렌을 다양한 부피비로 사용하여 백색 유기발광소자를 제작하였다. 그 결과 C.I.E. 좌표가 (0.32, 0.39)인 백색 유기발광소자를 얻었다. 다양한 부피비의 소자 중 루브렌을 1.5% 이하로 증착된 소자가 3% 이상으로 증착된 소자 보다 전기발광 효율이 높았다. 더욱이 2-NTA를 포함하 는 백색 유기발광소자는 같은 조전하에서 2-NTA 만의 청색 유기발광소자 보다 낮은 턴온 전압을 갖는다. 결론적으로 2-NTA는 적은 양의 오렌지 도판트만으로 순수한 백색 유기발광소자를 구현할 수 있다.

This study investigated a graded-refractive-index (GRIN) coating pattern capable of improving the light extraction efficiency of GaN light-emitting diodes (LEDs). The planar LEDs had total internal reflection thanks to the large difference in refractive index between the LED semiconductor and the surrounding medium (air). The main goal of this paper was to reduce the trapped light inside the LED by controlling the refractive index using various compositions of (TiO2)x(SiO2)1−x in GRIN LEDs consisting of five dielectric layers. Several types of multilayer LEDs were simulated and it was determined the transmittance value of the LEDs with many layers was greater than the LEDs with less layers. Then, the specific ranges of incident angles of the individual layers which depend on the refractive index were evaluated. According to theoretical calculations, the light extraction efficiency (LEE) of the five-layer GRIN is 25.29 %, 28.54 % and 30.22 %, respectively. Consequently, the five-layer GRIN LEDs patterned enhancement outcome LEE over the reference planar LEDs. The results suggest the increased light extraction efficiency is related to the loss of Fresnel transmission and the release of the light mode trapped inside the LED chip by the graded-refractive-index.

In this study, a mixed resin containing Bis-GMA was developed to produce a light-emitting sign using quantum dots. As a result of measuring the viscosity, color coordinates change, and luminance of the mixed resin, the following conclusions were obtained. The viscosity of the mixed resin decreased as the content of the diluent increased, and viscosity values ​​ranged from 3,627 to 1,349cps showed as a result. The viscosity of the mixed resin decreased as the temperature increased, and the viscosity showed a value of 5,156 to 1,132cps. For the optical properties of InP/GaP/ZnSe/ZnS quantum dots, the absolute quantum efficiency was 91% at 522nm and 90% at 618nm when the gallium was 0.01%. The luminance of the light-emitting sign using the resin mixed with quantum dots was showed 142.6cd/m2 in white and 104.2cd/m2 in the red region.

Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9% for luminance, and 1.9% for luminous efficiency.

본 연구는 LED 광원의 파장이 분화 국화의 생육에 미치는 영향을 조사하기 위하여 22℃ 항온조건에서 주간 11시간, 야 간 13시간의 광주기로 조절된 폐쇄형 식물생장상에서 7주간 단일상태로 재배된 ‘오렌지에그’ 품종의 생육 및 개화 특성을 비교하였다. LED 인공광원은 청색광(444nm), 적색광(652nm), 그리고 청색광과 적색광, 백색광이 각각 2:5:1로 조합된 혼합 광을 사용하였다. 그 결과, 분화 국화 ‘오렌지에그’ 품종의 초 장은 적색광에서의 평균 9.43cm로 가장 길었으며, 청색광이 혼합광에 비해 짧았으나 통계적 유의성은 인정되지 않았다. 초폭과 엽폭은 초장에 대한 생육반응과 유사하게 적색광에서 가장 크게 신장하였고, 청색광과 혼합광에서는 유의적인 차이 를 보이지 않았다. 엽수와 엽장은 혼합광보다 청색광과 적색 광 등 단색광에서 더 많고 길었다. 분화 국화 ‘오렌지에그’ 품 종의 개화특성의 경우에는 청색광과 적색광, 혼합광 모두 단 일처리 16~17일 이후에 화아분화가 완료되어 발뢰가 시작되 었으나, 적색광과 청색광 하에서 생육한 국화는 화아발달이 정상적으로 이루어지지 않아 최종 개화까지 이루어지지 않았 고, 혼합광 하에서 생육한 국화만 단일처리 5주 후에 정상적 으로 개화되었다. 따라서 식물공장에서 분화 국화를 생산하기 위한 인공광원으로는 청색광과 적색광, 백색광으로 구성된 혼 합광을 사용하는 것이 가장 유용하리라고 판단된다.

A transparent quantum dot (QD)-based light-emitting diode (LED) with silver nanowire (Ag NW) and indium-tin oxide (ITO) hybrid electrode is demonstrated. The device consists of an Ag NW-ITO hybrid cathode (-), zinc oxide, poly (9- vinylcarbazole) (PVK), CdSe/CdZnS QD, tungsten trioxide, and ITO anode (+). The device shows pure green-color emission peaking at 548 nm, with a narrow spectral half width of 43 nm. Devices with hybrid cathodes show better performances, including higher luminance with higher current density, and lower threshold voltage of 5 V, compared with the reference device with a pure Ag NW cathode. It is worth noting that our transparent device with hybrid cathode exhibits a lifetime 9,300 seconds longer than that of a device with Ag NW cathode. This is the reason that the ITO overlayer can protect against oxidization of Ag NW, and the Ag NW underlayer can reduce the junction resistance and spread the current efficiently. The hybrid cathode for our transparent QD LED can applicable to other quantum structure-based optical devices.

Light is an important factor for cordycepin production in Cordyceps militaris. We investigated the effects of different light-emitting diode (LED) conditions including various LED wavelengths and their combinations on cordycepin production in Cordyceps militaris cultivated in submerged culture. The results of our study showed that the combinations of LED wavelengths were more beneficial than single LED sources for cordycepin production. Among the three tested wavelength combinations, the greatest effects for cordycepin production were observed for the red:blue light combination at the wavelength ratio of 5:5 or 3:7. The optimal culture conditions were 19.2278 h/day of illumination time; 9.19497 g/50 mL of glucose content in the media; and 53.112 h of cultivation time. Our model predicted a maximum yield of 2860.01 μg/mL cordycepin. Finally, to verify the calculated maximum, we performed experiments in the culture media representing the obtained optimum combination and the cordycepin yield of 2412.5 μg/mL.