The purpose of this study was to investigate the effect of shrimp flour on quality characteristics of dumpling shell. Dumpling shell samples were prepared with wheat flour along with the addition of different amount of shrimp flour, followed by functional measurements and sensory evaluations. According to amylograph data, the composite shrimp flour/wheat flour samples had increased gelatinization temperature with increasing shrimp flour content, while initial viscosity at 95℃, viscosity at 95℃ after 15 minutes, and maximum viscosity were reduced. In terms of color values, L value decreased, but a and b values increased with increasing shrimp flour content. Furthermore, the addition of shrimp flour increased hardness and decreased chewiness in all samples. Overall, sensory evaluations proved that dumpling shell with 10% added shrimp flour was preferred over the other samples.

The purpose of this study was to investigate the quality characteristics of cookies prepared with shrimp powder (0, 3, 5, 7, 9%) substituted for flour as a snack food for Kindergarteners. The pH of the cookie dough decreased significantly in response to the addition of all levels of shrimp powder. However, there were no significant differences in the dough values among the test groups. Furthermore, when the spread factor values were compared among groups, they were found to be inversely proportional to the shrimp powder concentration. In addition, the Hunter's color L, a and b values decreased significantly as the level of shrimp powder increased. Moreover, the addition of 3~9% shrimp powder resulted in increased hardness, cohesiveness, springiness, and brittleness when compared to the control. Finally, the results of acceptance test showed that the cookies containing 5% shrimp powder had the highest scores.

For use in ultrasonic actuators, we investigated the structural and piezoelectric properties of (1 - x)Pb(Zr0.515Ti0.485)O3 - xPb(Sb1/2Nb1/2)O3 + 0.5 wt% MnO2 [(1 - x)PZT - xPSN + MnO2] ceramics with a variation of x (x = 0.02, 0.04, 0.06, 0.08). All the ceramics, which were sintered at 1250˚C for 2 h, showed a typical perovskite structure, implying that they were well synthesized. A homogeneous micro structure was also developed for the specimens, and their average grain size was slightly decreased to 1.3μm by increasing x to 0.8. Moreover, a second phase with a pyrochlore structure appeared when x was above 0.06, which resulted in the deterioration of their piezoelectric properties. However, the 0.96PZT-0.04PSN+MnO2 ceramics, which corresponds with a morphotropic phase boundary (MPB) composition in the (1 - x)PZT - xPSN + MnO2 system, exhibited good piezoelectric properties: a piezoelectric constant (d33) of 325 pC/N, an electromechanical coupling factor (kp) of 70.8%, and a mechanical quality factor (Qm) of 1779. The specimens with a relatively high curie temperature (Tc) of 305˚C also showed a significantly high dielectric constant (εr) value of 1109. Therefore, the 0.96PZT - 0.04PSN + MnO2 ceramics are suitable for use in ultrasonic vibrators.

들잔디의 최적 조직배양 조건을 확립하기 위하여 들잔디 성숙종자로부터 재분화능이 높은 배발생 캘러스 유도효율에 미치는 몇 가지 요인에 관하여 조사하였다. 성죽종자의 소독은 30% (v/v) NaOCl 농도로 60분간 처리하였을 때 가장 낮은 오염율과 가장 높은 캘러스 유도 효율을 보였다. 옥신류의 혼용처리에 따른 배발생 캘러스 유도효율은 2,4-D와 diacamba를 각각 3 mg/L로 혼용처리 하였을 때 가장 높은 배발생 캘러스 유도효율을 나타내었다.

This study was conducted to investigate the quality characteristics of cookies prepared using skate powder (0, 1, 3, 5, 7%) as a substitute for flour. The pH of the cookie dough decreased significantly in response to the addition of all levels of skate powder. However, there were no significant differences in the dough values among the test groups. Furthermore, when the spread factor values were compared among groups, they were found to be inversely proportional to the skate powder concentration. In addition, the Hunter's color L, a and b values decreased significantly as the level of skate powder increased. Moreover, the addition of 1-7% skate powder resulted in increased hardness, cohesiveness, springiness, and brittleness when compared to the control. Finally, the results of the sensory evaluation and acceptance test showed that the cookies containing 3% skate powder had the highest scores.

Graphite for the nuclear reactor is used to the moderator, reflector and supporter in which fuel rod inside of nuclear reactor. Recently, there are many researches has been performed on the various characteristics of nuclear graphite, however most of them are restricted to the structural and the mechanical properties. Therefore we focused on the thermal property of nuclear graphite. This study investigated the thermal emissivity following the oxidation degree of nuclear graphite with IG-11 used as a sample. IG-11 was oxidized to 6% and 11% in air at 5 l/min at 600˚C. The porosity and thermal emissivity of the sample were measured using a mercury porosimeter and by an IR method, respectively. The thermal emissivity of an oxidized sample was measured at 100˚C, 200˚C, 300˚C, 400˚C and 500˚C. The porosity of the oxidized samples was found to increase as the oxidation degree increased. The thermal emissivity increased as the oxidation degree increased, and the thermal emissivity decreased as the measured temperature increased. It was confirmed that the thermal emissivity of oxidized IG-11 is correlated with the porosity of the sample.

레드 톱 밴트그래스의 성숙종자로부터 최적조직배양조건을 확립하기 위하여 종자로부터 배발생 캘러스 유도 및 식물체 재분화 체계를 확립하였다. 종자로부터 배발생 캘러스 유도시 첨가되는 auxin으로는 2,4-D가 가장 효율적이었으며, 2 mg/L의 2,4-D가 첨가된 MS 배지에서 가장 높은 빈도로 배발생 캘러스가 유도되었다. 배발생 켈러스로부터 식물체 재분화는 0.5mg/L의 2,4-D와 2 mg/L의 BA가 첨가된 N6 배지에서 배양했을 때 64.4%의

중ㆍ저준위 방사성폐기물 처분 부지의 부지특성조사 결과를 이용하여 처분장 부지의 지하수 유동체계를 이해하기 위한 수치 모델링을 수행하였다. 부지의 투수성 단열대 및 암반단열의 분포 특성에 근거하여 단열망 모델을 구축하고, 이를 이용하여 생성된 10개의 수리전도도장을 지하수 유동 모델링에 반영한 추계론적 Hybrid-EPM 방법으로 수치 모델을 구성하였다. 10회의 지하수 유동 모델링 결과, 처분 부지의 지하수두 및 지하수 흐름은 지표 근처에서 지형적인 요소에 크게 지배를 받는 것으로 나타나며 처분장 심도에서는 주변에 존재하는 투수성이 높은 단열대에 의해 영향을 받음을 확인할 수 있었다. 특히, 처분 시설 건설 중 사일로 주변 지역에서 수위 강하가 크게 발생하는 것으로 분석되었다. 처분 시설 폐쇄한 후 지하수위는 1년 이내에 급속히 회복되며, 대략 2년이 지난 후 완전히 회복 될 것으로 분석되었다.

중·저준위방사성폐기물 처분부지에 대한 건설 및 운영 인허가 취득을 위한 종합적인 부지 특성조사가 사업자인 한국수력원자력(주)의 책임 하에 이루어졌으며, 수리지질조사는 부지의 수리지질학적 특성 해석과 방사선적 안전성 평가를 위한 기초자료 생산을 목적으로 수행되었다. 처분부지의 수리지질특성은 주로 지표에서 이루어진 지질조사, 시추조사, 각종 수리시험 및 지구물리탐사 자료를 종합적으로 분석하여 수리지질체계의 특성을 평가하고, 이를 토대로 수리토양영역, 3 개의 수리암반영역 및 5 개의 투수성구조영역으로 구성되는 수리-구조모델을 제시하였다. 본 논문에서 제시된 수리-구조모델과 수리인자는 지하수유동 모델 해석 업무에 직접 이용되었다. 본 논문의 결과는 지표조사단계에서 얻어진 자료에 근거한 것이므로 수리지질특성과 관련된 제반 조사방법에 가정과 불확실성이 내재되어 있다. 따라서 현재 진행 중인 지하시설 건설과정에 취득되는 직접적인 수리지질특성 관련 자료를 종합적으로 재 해석함으로써 부지특성조사 단계에서의 가정과 불확실성을 저감시킬 수 있고, 최종적인 수리-구조모델의 신뢰성 향상을 기대할 수 있다.

Fuzzy partition is a conceptual vehicle that encapsulates data into information granules. Fuzzy equalization concerns a process of building information granules that are semantically and experimentally meaningful. A few algorithms generating fuzzy partiti