International Maritime Organization (IMO) has established standards for ship manoeuvrability and applied these standards for vessels over 100 meters in length that built since 2004 (IMO, resolution MSC.137[76]). These standards are no exception to fishing vessels. In this study we carried out a manoeuvring simulation of the new model ship (Stern trawler) of fisheries training ship of Pukyong National University based on Kijima's empirical formula. The formula takes into account of the effect of stern shape or does not take into account of the effect of stern shape. Also we checked whether the simulation results of turning motion of model ship meet IMO manoeuvrability criteria and then compared trajectories between the simulation results of model ship and the results of real sea trial test of the existing ship. In conclusion, Kijima's empirical formulas can estimate the manoeuvrability of fishing vessels at design stage approximately, it needs more parameters of fishing vessel own in case of expressing the manoeuvrability of fishing vessel accurately.

저자들은 조영증강 복부 전산화단층촬영과 혈관조영술로 급성췌장염이 동반된 췌장의 동정맥 기형을 진단하였고 수술적 절제로 치료된 45세 남성의 예를 경험하였다. 췌장의 동정맥 기형은 매우 드문 질환이며 췌장염이 동반된 것은 더 드물다고 알려져 있다. 그러나 췌장의 동정맥 기형도 급성췌장염의 한가지 원인이 될 수 있음을 고려해야 한다.

This study examined the quality characteristics and anti-oral microbial activity of bamboo leaf jelly prepared with different 5 levels (0, 10, 20, 30, and 40%) of bamboo (Phyllostachys nigra var. henonis) leaf extract. The sugar contents of bamboo leaf jelly were increased significantly by increasing the level of bamboo leaf extract. The luminance and Hunter’s a values of the jelly samples increased with increasing bamboo leaf extract, but the 40% bamboo leaf jelly had the lowest Hunter’s b values. The hardness, adhesiveness, gumminess, and chewiness increased significantly with increasing bamboo leaf extract. Among the mechanical properties, only the flavor of the jelly with 30 and 40% bamboo leaf extract were increased significantly. The extract of bamboo leaves had strong antimicrobial activity against S. mutans, S. sobriuns, P. gingivalis, and P. intermedia at a concentration of 40%. These results suggest that bamboo leaf extract can be useful in the production of high quality jelly.

본 연구는 거친대추멍게 (Ascidiella aspersa)의 알 발육과 유생 부착에 미치는 수온과 염도의 영향을 파악하고자 실시하였다. 거친대추멍게 알 발육과 유생 부착 실험은 12개의 수온 조건 (6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28°C, 과 2개의 염도 조건 (30, 34 psu)에서 진행하였다. 거친대추멍게 알의 부화율과 발육률은 염도에 관계없이 수온이 높아짐에 따라 증가하는 경향을 보였으며 최적 수온 범위 이후 감소하는 경향을 보였으며 부화 및 발육을 위한 최적 수온은 20~22°C의 범위를 보였다. 저온 발육임계수온은 30 psu와 34 psu에서 각각 1.5°C와 1.8°C로 큰 차이를 보이지 않았다. 부착률은 염도에 관계없이 16~22°C의 최적 수온 범위를 보였으며 부착시간은 수온이 증가함에 따라 지속적으로 증가 하였다. 결과적으로 거친대추멍게의 최적 발육 및 생존 수온은 염도 조건에 관계없이 20~22°C 범위를 보였다. 본 연구 결과는 국내 양식장에서의 거친대추멍게에 의한 경제적 피해가 증가하고 있는 시점에서 거친대추멍게의 분포 및 발생 시기를 예측하고 확산 방지 및 방제 방안을 구축하는 데 활용될 수 있을 것으로 생각된다.

본 연구에서는 가변 통기성 스마트 의류의 제작을 위해 필요한 형상기억합금 액추에이터의 작동 조건을 파악하였다. 의복의 개방, 폐쇄와 같은 양방향 작동 시 형태 변형 시에만 전력을 소모하는 저전력 소모 액추에이터 개발을 위해 복수 채널의 일방향 형상기억합금을 이용하여 스위치로 작동되는 액추에이터를 설계하였으며 가장 효율적으로 작동할 수 있는 와이어의 직경과 전압인가 단위시간을 도출하였다. 선행연구 결과 도출된 양방향 작동이 가능한 일방향 형상기억합금의 직경 범위 내에서 Arduino 스위치를 제작하여 3.7V 전압인가 시 변화량을 분석한 결과 0.4Φ의 액추에이터가 가장 적합한 것으로 나타났다. 0.4Φ 형상기억합금와이어를 사용한 양방향작동 액추에이터의 개방, 폐쇄에 필요한 최적전압인가 시간을 도출하기 위해 액추에이터의 최대개방, 최소폐쇄 도달 전압인가 시간으로부터 50ms씩 감소, 증가 시키며 냉각 후 액추에이터의 내경을 비교하는 방식으로 측정한 결과 개방 동작에 필요한 최적 전압인가 단위시간은 4,100ms로 나타났다. 각 채널간의 발열에 의한 간섭을 최소화하기 위한 양방향간 작동 시 필요 딜레이 분석을 위해 상온에서 형상기억합금에 최적 전압입가 시간인 4.1초 동안 전원을 공급하고 가열 후 냉각까지의 과정을 열화상카메라로 촬영하여 형상기억합금 와이의 온도가 냉각시의 상변태온 이하로 하강하는 시점을 파악한 결과, 액추에이터의 양방향간 작동 딜레이는 1.8초 이상이 확보되어야 함을 파악할 수 있었다.

To analyze the synergistic effects of applying lavender aroma to a footbath, we analyzed the EEG and emotional responses of footbath, lavender inhalation, and lavender footbath in women in their 30s. Foot baths reduced wave activation, wave and wave inactivation, and SEF50 and SEF90. The foot bath activated waves by about 66% compared to the background EEG, and reduced SEF50 and SEF90 by 0.43 Hz-0.68 Hz and 3.7 Hz, respectively. Lavender inhalation activated α, β, and γ waves at a concentration of 1% or more, and inactivated θ waves. As the concentration of lavender inhalation increased, α waves increased and β and γ waves decreased. Lavender foot bath activates θ waves and α waves, and inactivates β waves and γ waves. Compared with the background EEG, the lavender foot baths reduced SEF50 and SEF90, which are the median frequencies of EEG power, 0.5 Hz and 3.4 Hz, respectively. Lavender showed a positive emotional response when applied to inhalation and foot bath. Lavender showed a positive emotional response when applied to inhalation and foot bath. When the lavender was inhaled at the concentration of 1~10% and the lavender foot bath was applied, the average preference index (API) showed 0.64~0.66 and 3.6 ± 0.6, respectively. Lavender oil has a greater synergistic effect on emotional reactions when applied to an aromatherapy bath than by inhalation. Lavender decreased SEF50 and SEF90 as the API increased. A lavender footbath was superior to lavender inhalation in both emotional and EEG responses, and was more relaxed and calming than a footbath. These results suggest that the aroma foot bath method, in which lavender is applied to a footbath, is more effective in terms of providing relaxation and calming than a footbath or lavender inhalation aromatherapy.

In current research, it was attempted a preliminary design and evaluation of non-uniform ultra high-strength concrete (UHSC) truss members. UHSC used here has the compressive strength of 180 MPa, the tensile strength of 8 to 20 MPa, and the tensile strain after cracks up to 2%. By the three-dimensional finite element stress analysis as well as strut-tie approach on concrete solid beams, the non-uniform truss shape of UHSC truss was designed with the architectural esthetic concept. In a series of examples, to compare with conventional concrete members, the proposed UHSC truss members have advantages in capabilities of the slender design with minimum weight with high performances under transverse loadings as well as the aesthetically non-uniform design for spatial structures.

This study aimed to produce high-quality blastocysts and establish appropriate microinjection conditions for the introduction of target gene. First, we identified embryo development to the blastocyst stage after microinjection using the CRISPR/Cas9 system on the Cas9 protein or mRNA. As a result, we confirmed that blastocyst development in the Cas9 mRNA injected group significantly increased when compared to the Cas9 protein injected group (p<0.05). However, the blastocyst gene targeting rate increased in the Cas9 protein injected group when compared to the Cas9 mRNA injected group (p<0.05). Next, we treated the injection medium with 10 μg/ml of cytochalasin B (CB), and the microinjected embryos were cultured in CR1-aa medium supplemented with 0.1 μM of melatonin (Mela). Consequently, the blastocyst formation rate significantly increased in the CB treated group (p<0.05). After microinjecting embryos with the CB treated injection medium, we investigated blastocyst formation and quality via Mela treatment. Consequently, the Mela treated group demonstrated significantly increased blastocyst formation rates when compared to the non-treated group (p<0.05). Furthermore, immunofluorescence assay using RAD51 (DNA repair detection protein) and H2AX139ph (DNA damage detection protein) showed an increase in RAD51 positive cells in Mela treated embryos. Therefore, we verified the improvement in knock-in efficiency in microinjected bovine embryos using Cas9 protein. These results also demonstrated that the positive effect of the CB and Mela treatments improved the embryonic developmental competence and blastocyst qualities in genetically-edited bovine embryos.

The outrigger damper system is a structural system with excellent lateral resistance when a wind load occurs. However, research on outrigger dampers is still in its infancy. In this study, dynamic response control performance of damper is analyzed according to change of stiffness value and damping value of damper. To do this, a real-scale 3D model of 50 stories has been developed and the artificial wind load has been entered for dynamic analysis. Generally, the larger the damping value, the smaller the stiffness value is, the more effective it is to reduce the maximum displacement and acceleration response. However, the larger the attenuation value as the cost of construction increases, it is necessary to select appropriate stiffness and damping value when applying an outrigger damper.