검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 4,686

        901.
        2017.11 구독 인증기관·개인회원 무료
        폴리이미드는 뛰어난 기계적 강도, 내열성, 내화학성 및 여러 기체에 대한 높은 투과선택성을 가지고 있으나 유기용매에 대한 낮은 용해성으로 인해 제막할 경우 많은 제약을 받고 있다. 따라서 유기용매에 가용성을 가지는 폴리이미드에 대한 연구가 필요하다. 본 연구에서는 지환족 다이안하이드라이드인 5-(2,5-dioxotetrahydrofuryl)-3-methyl-3-cyclohexene-1,2-dicar boxylic (DOCDA) 와 다양한 다이아민을 이용하여 DOCDA계 폴리이미드를 합성하였다. FT-IR을 통해 합성이 잘 이루어졌음을 확인하였고, 용해도 테스트를 통해 여러 유기용매에 대한 용해성을 확인하였다. 또한, 기체투과특성을 알아보기 위하여 time-lag 장비를 이용하여 투과도 및 선택도를 알아보았다.
        902.
        2017.11 구독 인증기관·개인회원 무료
        미세 기공을 갖는 세라믹 중공사막의 기공 크기 및 분포도를 분석하기 위해 gas-liquid displacement porometer(GLDP)와 liquid-liquid displacement porometer(LLDP) 두 가지 측정법을 이용하였다. GLDP와 LLDP를 이용한 기공 크기 측정 및 분석과 관련하여 이론적 고찰을 진행하였고, 10-100 nm의 기공 크기를 갖는 세라믹 중공사막의 기공 크기 및 분포도를 비교 분석하였다. 또한, 서로 다른 기공크기를 가질 것으로 예상되는 세 종류의 세라믹 중공사막의 기공 크기 측정 결과와 수투과도, 배제율 측정 결과를 종합하여 분리막 특성의 연계성을 확인하였다.
        903.
        2017.11 구독 인증기관·개인회원 무료
        평관형 알루미나 세라믹 멤브레인을 적용한 실험실 규모의 단독 혐기성 유동상 멤브레인 생물반응기에서 알루미나 세라믹막과 비흡착성 PET구형입자를 유동메디아로 적용하여 평균 유입 COD 250 mg/L를 포함하는 합성폐수를 적용하여 상온에서 유기물 제거효율과 파울링 현상을 관찰하였다. 약 250일 연속운전에서 약 10 L/m2.hr 투과플럭스가 달성되었다. 운전기간 동안 약 80% COD 제 거율을 나타내었고 0.075 kWh/m3 운전에너지가 요구되었고 이는 생산되는 메탄발생 전기에너지의 약 30%에 해당되었다. 실험결과는 GAC를 유동메디아로 사용한 동일 반응기의 결과와 비교분석하였다.
        904.
        2017.11 구독 인증기관·개인회원 무료
        2015년 파리기후변화협약에 의한 신기후체제로 전세계 195개국이 온실가스 감축을 약속하게 되었다. 한국도 2013년 기준 온실가스 배출이 7억 톤을 기록 하였으며 BAU대비 37% (3.1억 톤)의 감축의무를 약속하고 있다. 국내외의 철강, 화학, 환경분야 및 천연가스전, 석탄전, 세일가스 등에서 대량 발생하는 산업부 생가스로부터 이산화탄소, 메탄, 일산화탄소, 수소 등을 분리하여 탄소자원화 (carbon resources utilization)의 원료로 사용하거나 수소, 메탄 등의 신재생 에 너지를 확보하는 분리기술에 대한 중요성이 높아지고 있다. 본 발표에서는 이러한 부생가스들의 발생현황과 이들로부터 고순도의 이산화탄소 및 메탄을 분리 회수할 수 있는 막분리기술의 연구동향과 화학연구원에서 수행중인 기체분리막 기술을 소개한다.
        905.
        2017.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In this study, the coating of an Al-Cr layer on the surface of a Zircaloy-4 alloy was carried out through plasma pretreatment coating and a laser surface melting process. Two different conditions for laser treatment, severe or minimal surface melting of the Zr alloy substrate, were applied to form the final coating. When there was significant surface melting of the Zr alloy, the solidification microstructure of the newly formed coating layer was mainly composed of needle-shaped Al3Zr, Al(Cr) and Al7Cr phases. On the other hand, the solidification microstructure of the coating layer was mainly composed of Al(Cr) and Al7Cr phases when there was minimal surface melting of Zr base in the laser process. However, when the coating was maintained at 1100 oC for 2 hours, significant inter-diffusion occurred between the phases in the coating. As a result, the upper part of the coating layer was observed to mainly consist of Al3Zr and Al8Cr5 phases, regardless of the laser treatment conditions.
        4,000원
        906.
        2017.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The microstructural evolution and modulation of mechanical properties were investigated for a Ti65Fe35 hypereutectic alloy by addition of Bi53In47 eutectic alloys. The microstructure of these alloys changed with the additional Bi- In elements from a typical dendrite-eutectic composite to a bimodal eutectic structure with primary dendrite phases. In particular, the primary dendrite phase changed from a TiFe intermetallic compound into a β-Ti solid solution despite their higher Fe content. Compressive tests at room temperature demonstrated that the yield strength slightly decreased but the plasticity evidently increased with an increasing Bi-In content, which led to the formation of a bimodal eutectic structure (β-Ti/TiFe + β- Ti/BiIn containing phase). Furthermore, the (Ti65Fe35)95(Bi53In47)5 alloy exhibited optimized mechanical properties with high strength (1319MPa) and reasonable plasticity (14.2%). The results of this study indicate that the transition of the eutectic structure, the type of primary phases and the supersaturation in the β-Ti phase are crucial factors for controlling the mechanical properties of the ultrafine dendrite-eutectic composites.
        4,000원
        907.
        2017.10 KCI 등재후보 구독 인증기관 무료, 개인회원 유료
        목적 : 본 연구는 국외에서 시행되고 있는 학교작업치료 방법과 효과에 대해 체계적으로 고찰하여 국내의 장애학생들이 학교생활에 효율적으로 참여할 수 있는 효과적인 중재방안에 대해 생각하기 위하여 실시하였다. 연구방법 : 2015년 12월~2016년 1월 동안 MEDLINE (Pubmed), EMBASE의 데이터베이스에서 검색하였으며, 총 800개의 연구 중 초록 및 본문 확인을 통하여 걸러낸 후 남은 5개의 연구를 체계적으로 고찰하였다. 연구의 근거 질적 수준을 평가하기 위해 AOTA Evidence-Based Practice Literature Review Project를 사용하였으며, 학교작업치료활동은 Occpational Therapy Framework: Domain and Process 2nd ed(American Occupational Therapy Association [AOTA], 2008)에 나와 있는 작업치료 중재 접근법을 바탕으로 분류하였으며, 중재효과도 같이 기술하였다. 결과 : 총 5개의 연구 중 근거 수준이 IV인 연구는 2개, 근거 수준이 V인 연구는 3개였다. 중재법으로는 보조공학도구, 모의대학교육프로그램, 전도교육, 개인작업시스템이 있었으며, 대상자특성, 수행기술, 수행양상, 배경 또는 물리적 환경, 활동요건에 초점을 맞춘 중재법이었다. 결론 : 본 연구는 국내에 아직 도입되지 않는 중재법을 알아보고 분석해 보았다는 점에서 큰 의미가 있으며, 앞으로 국내 학교작업치료의 발전을 위한 연구 자료로 쓰일 수 있기를 기대해 본다.
        4,000원
        908.
        2017.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The 1960s in Britain was the period of rapid economic and social change. Under this circumstance, the visionary architect Cedric Price designed the Fun Palace, of which idea came from the theatre producer, Joan Littlewood. They hoped this place to be an improvisational learning space, so Price proposed the building as ‘kit of parts’ which can respond to programmatic indeterminacy. Cybernetics was introduced to control this flexibility dramatically changed the character of the project from ‘theatre of people’ to ‘interactive machine’. That resulted in the change of the status of user from subjective human beings to abstract data in the cybernetic algorithm as well, and led the project to a completely opposite direction from that Price intended. After Fun Palace, cybernetics technology could still be found in his other projects, and it can be assumed that this was because the algorithmic system of cybernetics were on the same line of thought of Price’s idea ― anti-building or ‘kit of parts’. The effects of cybernetics varied in projects; Similar negative effect in Fun Palace can be found in Generator project, but on the other hand, in Potteries Thinkbelt project, cybernetics showed a positive aspect by contribution to the development of project on the formal analogy of algorithmic network.
        4,300원
        909.
        2017.10 구독 인증기관·개인회원 무료
        도시지역에서 녹지의 역할은 도시민들의 스트레스 완화효 과뿐만 아니라 도시기온 저감, 이산화탄소흡수, 증발을 통한 습도조절, 그늘제공의 도시환경개선에도 큰 역할을 수행하 며, 도시민의 건강증진측면에서 녹지의 중요성이 더 부각되 고 있다. 녹지 내 수목의 광합성 및 다양한 원인에 의해 발생하는 공기이온은 실제적으로 인간의 건강에 긍정적인 영향 을 미치며, 오염물질을 저감하는 것으로 밝혀졌음에도 불구 하고 그에 대한 관심은 상대적으로 낮은 것으로 판단된다. 이에 본 연구에서는 도심지 내 아까시나무가 우점되어 있는 근린공원에 이온지수의 특성을 분석하여 향후 근린공 원의 건강성증진을 위한 생태적 관리의 기초자료로 활용하 고자 하였다. 연구대상지는 서울 은평구에 위치한 구산근린공원을 대 상으로 진행하였다. 대상지의 분류는 10m×10m으로 격자 그리드를 형성하여 가로 A~Z, 세로 1~21로 구분하여 가로· 세로 30m마다 측정지점을 선정하였으며, 식생이 바뀌는 특 이점을 추가로 조사를 하였다. 식생현황과 경사도, 사면방 위, 습윤지수도, 토지이용유형, 토지피복유형, 표고를 조사 한 후 측정지점마다 양이온과 음이온을 각각 5반복으로 측 정하였으며, 동시에 기온, 상대습도, 풍속 및 복사량을 측정 하였다. 단순 음이온 또는 양이온의 변화는 동일한 경향을 나타낼 것으로 예상되므로 이를 보정하기 위하여 이온지수 로 환산하여 분석을 실시하였다. 측정기간은 9월로 측정시 간대는 10시부터 16시까지 진행하였다. 29개 지점의 평균 LAI 지수는 3.08로 측정되었으며, 기 온의 경우 25.8℃로 측정되었다. 상대습도는 69.4%로 측정 되었으며, 일사량과 순복사량은 각각 67.26W/m2, 57.48로 측정되었다. 측정지의 식생환경은 교목의 경우 아까시나무 가 우점하고 있었으며, 아교목층의 경우 단풍나무가 주를 이루었으며, 산벚나무, 가중나무, 밤나무 등이 출현하였다. 관목에서는 국수나무가 우점하고 있었으며, 간헐적으로 개 나리, 신갈나무 등이 출현하였다. 총 29지점을 대상으로 평균 양이온은 350±50ea/cm3 으 로 발생하였으며, 가장 낮은 지역은 S11로 분석되었다. 가 장 높은 지역은 G5로 평균보다 약 150ea/cm3정도 높게 분 석되었다. 이는 도로와 인접해 있고 교목층이 없어 높게 나 온 것으로 사료되었다. 음이온의 경우 430±100ea/cm3 으로 발생하였으며, 가장 높은 지역은 S11 지역으로 평균보다 약 100ea/cm3 정도 높게 발생하였으며, 가장 낮은 지역은 R11로 평균보다 약 200ea/cm3정도 낮게 발생하였다. 팥배나무가 우점하고 있 는 지역으로 다른 지역에 비해 상대습도가 많이 낮았기 때 문에 나온 결과로 사료된다. 이온지수의 경우 가장 높은 지역은 S11로 다른 지역에 비해 약 1.2정도 높은 것으로 조사되었으며, 이는 다른 지역 에 비해 음이온 발생량이 높고, 상대습도가 높았으며, 양이 온 발생량이 낮았기 때문이었다. 가장 낮은 지역은 R11로 상대습도가 가장 낮았으며, 음이온 발생량 또한, 가장 낮게 측정되어 나온 결과로 사료되었다. 도심지 아까시나무림에 격자그리드를 형성하여 이온지 수 특성에 대한 연구로서 습도가 변화하는 지점에서는 이온 지수에 차이가 나타나는 것으로 분석되었다. 그러나 본 연 구는 단순 여름철에 측정을 실시하여 계절변화에 따른 이온 지수변화를 고려하지 못하였다는 제한점이 존재하였다. 이 에 따라 차후 계절변화에 따른 연구와 조사가 이루어져야할 것으로 판단되어진다.
        910.
        2017.10 구독 인증기관·개인회원 무료
        생물다양성을 보전하기 위해 생물종의 서식지평가지표 개발 및 각 생물종의 적합도가 조사되고 있다. 그러나 선행연 구의 서식지평가는 대상지 내 출현종 목록작성에 지니지 않는 문제점이 있으며, 실질적으로 멸종위기종의 출현여부 와 개발에 의한 영향을 예측하기 위해서는 보다 정확하고 획일화된 서식지 조사와 평가체계를 확립하여야 한다. 이에 본 연구에서는 보존 가치가 매우 높은 동물이나 밀렵과 급격 한 서식지 변화로 멸종 위기에 처해 있는 사향노루를 대상으 로 기존 분석방법인 물리적 구조와 식생환경 분석에 추가적으 로 기상환경 측정을 통해 생명기후지수(Bio Climate Index) 를 개발을 위한 기초연구를 진행하였다. 선행연구 고찰을 통해 현행 서식지 분석방법을 고찰한 결과 조사방법에 있어서 흔적조사, 미끼추적, 무인센서카메 라, DNA분석, 포획, 원격무선추적 등의 방법이 조사되었 다. 생명기후지수 개발을 통한 사향노루의 서식지 분석을 위해 사향노루가 발견된 강원도 화천 민간인출입통제선 일 대를 대상지로 선정하였다. 사향노루 서식지 조사방법으로 는 배설물과 흔적조사를 기준으로 조사를 실시하였으며, 조 사지역에서 물리적 구조인 지형, 경사, 향, 토양 온․습도 등 대상지 현황을 측정하였다. 식생환경 조사의 경우 흔적이 나타난 지점에서 교목, 아교목, 관목의 종류와 수고, 흉고직 경, 밀도, 울폐도 등을 조사하였다. 기상환경의 경우 식생환 경과 동일하게 흔적발견 시 동일 저점에서 기온, 상대습도, 풍속, 광량 등을 3반복 측정하였다. 멸종 위기종인 사향노루 조사를 통한 야생동물 조사방법 을 선정하기 위해 선행연구의 고라니, 노루, 산양, 삵, 수달 을 조사방법을 대상으로 빈도분석을 실시하였다. 흔적조사 의 경우 25번 조사방법으로 활용되었으며, 미끼추적 4번, 무인센서 카메라 분석 11번, DNA분석 5번, 포획 7번, 원격 무선추적 8번의 사례가 있었다. 사향노루의 채이 및 흔적분석결과 18개소에서 흔적이 발 견되었다. 물리적 구조의 분석결과 일반적으로 북사면 급경 사지가 있는 정산부와 능선부의 바위 지형에서 주로 발견되 었다. 해발고의 경우 746m~772m까지 6개소에서 흔적이 발견되었고 815m~833m 까지 약 3개소에서 흔적이 발견되 었으나, 해발고 913m~367m까지 9개소에서 흔적이 발견되 었다. 또한 주요 서식지나, 분장, 최근 흔적은 모두 해발고 900m 이상에서 발견되었다. 지형의 경우 계곡부가 2개소이 었으며, 정상부 3개소, 능선부 9개소, 사면부 4개소로 조사 되었다. 향의 경우 북향을 포함한 북서향이 9개소로 분석 되었고, 남동과 남서, 남사면이 각각 1개소 조사되었으며, 서향이 6개소로 분석되었다. 측정지의 현존식생유형 구분은 참나무림 이 6개소, 소나 무림 1개소, 혼효림 11개소로 대부분 혼효림이 주를 이루었 으며, 식생환경은 교목에서 소나무, 졸참나무, 굴참나무 등 소나무와 참나무류가 조사되었다. 아교목층의 경우 신갈나 무와 단풍나무, 함박꽃나무 등이 조사되었다. 관목의 경우 진달래와 철쭉이 주로 발견되었으나. 간헐적으로 싸리류, 참나무류, 생강나무 등이 발견되었다. 측정기간 중 대상지 의 근처 기상대 기온은 28.2℃로 측정되었으며, 습도는 46%로 측정되었다. 흔적이 발견된 곳의 기상환경은 기온의 경우 20.0℃∼25.7℃로 조사되었으며, 평균적으로 약 23. 2℃로 대상지 근처 기상대와 평균적으로 5℃ 적게 측정되 었다. 상대습도의 경우 65%∼95%로 측정되었으며, 평균적 으로 약 75%로 측정되었다. 대상지 근처 기상대 대비 30% 높게 측정되었다.
        911.
        2017.10 구독 인증기관·개인회원 무료
        국내에서 모기, 바퀴벌레 등 위생해충을 구제하기 위하여 사용하는 살충제와 공중의 보건을 위해 사용하는살균소독제제는 약사법에 따른 의약외품으로 허가관리하고 있다. 따라서 주무관청인 식약처에서는 의약외품 살균·살충제에 대한 허가 신청시 제출하는 자료의 범위 등을 법률적으로 제한하고 있다. 가정용 살충제 및 기피제 그리고살균소독제의 제출자료는 안전성·유효성에 관한 자료와 품질관리를 위한 기준 및 시험방법에 관한 자료로 대별되는데,이들 자료의 준비 및 세부 요건과 현재 식약처에서 운영 중인 가이드라인 등에 대하여 설명하고자 한다.
        912.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To date, many researches have been done for maize QPM lines, there is little maize QPM varieties in Korea. In this reason, to develop maize QPM cultivars, investigation of the growth characteristics and amino acid composition among QPM inbred lines was carried out. For this study, QPM inbred lines were donated from CIMMYT. Analyses of growth characteristics changes for each line were investigated. The range of siliking days were ranged from 60 to 69 days. Silking days for 4 QPM lines such as CML140, CML141, CML152, and CML493 were 60 days among donated QMP lines, CML557 was 69 days. In plant height, CML492 was shortest(152 cm) while CML143 was the longest(295 cm). The ear height of CML492 was 66 cm and 175 cm for CML143. Protein content of each maize QPM grains was from 9.07% to 12.67%. CML556 have the highest proteins content, while CML493 was the lowest among maize QPM grains. Content of fat was from 3.38% to 5.25%, and CML141 was the lowest and CML147 was the highest. The content of ash ranged from 1.22% to 1.78%, CML555 was the least and CML142 was the highest. The content range of carbohydrate was from 71.7% to 75.5%, CML557 was the least and CML493 was the highest. The calories of each inbred line ranged from 346 to 365 Kcal, CML140 was the least and CML492 was the highest. Major amino acid composition in maize QPM grain is glutamic acid (16.34%), proline (9.80%). The mean of lysine composition was 3.64%, and CML140 showed the highest ratio of 4.34%.
        4,000원
        913.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The aim of this study was to examine indoor fungal concentration and fungal volatile organic compounds(VOCs) in single-person households. A total of 22 houses occupied by one person were investigated in this study. 19 VOCs detected in the field were estimated as fungi-derived VOCs through a review of the literature, and 11 VOCs were confirmed as fungal VOCs by laboratory experiments. Exposure to fungal VOCs in the indoor environment has been confirmed to be highly influenced by airborne fungal concentration and indoor humidity. 3-octanone was characterized by a clear generation profile in Aspergilus versiocolor, and n-decane in Pencillum chrysogenum. ntetradecane emitted by Stachybotrys chartarum exhibited a tendency to occur consistently. The observations made in this study demonstrated that single-person households can easily be exposed to fungi, and MVOCs can be used as an indicator of fungal exposure in indoor environments.
        4,000원
        914.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목적 : 본 연구는 국내 작업치료(학)과 대학생의 진로선택에 대한 현황을 알아보고 일반적 현황에 따른 진 로성숙도와 진로불안감에 대해 알아보고자 하였다. 연구방법 : 작업치료(학)과가 개설된 4년제 대학 7개 학교, 3년제 대학 7개 학교의 총 2,180명의 학생을 대상으로 구조화된 설문을 실시하였고 1,590명의 응답을 최종분석에 사용하였다. 결과 : 전공 선택요인을 분석한 결과, 70.0%가 넘는 응답자가 입학 전 장애인관련 기관에서 봉사경험이 있 었고 가족 중 보건직종사자가 있는 경우도 60.0%에 달했다. 학과선택계기는 추천보다는 스스로 선택한 경우가 조금 더 높았으며 정보는 인터넷으로 습득한 경우가 가장 많았다. 관심치료 연령군은 소아가 913명이 응답하여 가장 높았고 관심 치료 분야는 감각통합치료 빈도가 가장 높았다. 학생들의 졸업 후 또는 십년 후 희망 취업지 모두 의료기관 취업의 비율이 가장 높았으며 응답자 중에 종합병원의 선호도 가 61.1%로 가장 높았다. 국시불안은 5점 만점에 평균 4.29으로 높은 편이었고 진로확신은 입학 시 평 균 4.34(5점 만점)에서 현재는 평균 4.15로 감소하였다. 그리고 진학확신수준에 따라 진로성숙도는 유 의미한 차이가 나타나지 않았지만 진로확신 수준이 높은 경우 진로불안이 유의미하게 높게 나타났다. 마 지막으로 진로성숙도와 진로불안은 유의미한 부적 상관관계를 보였다 결론 : 최근 작업치료 전공 학생들의 진로선택 현황, 진로성숙 및 진로불안의 경향에 대한 본 연구의 결과 는 향후 실제적이고 효과적인 교육환경 개선과 학생 지도를 위한 기초자료로 활용될 수 있을 것이다.
        5,100원
        915.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to identify the moderating effects of internet shopping experience on appearance management in elder people, psychological adaptation and social connectedness. Data were collected from 257 elder people who living in Seoul or Gyeonggi-do. Collected data were analyzed by frequency, descriptive statistic analysis, moderated stepwise regression. The results of the study were as follows: First, appearance management of elder people was significantly related to psychological adaptation and social connectedness. Second, internet shopping experience moderated between appearance management and social connectedness. Third, internet shopping experience is not a moderator variable on between appearance management and psychological adaptation, it just was a influential factor on psychological adaptation. Based on these results, it suggests that there are strong needs of approaching of practical and political interventions to development internet shopping system for social connectedness and psychological adaptation of the elderly in future aging society.
        4,000원
        916.
        2017.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Functional inner-wear being currently sold is being made without regard to the characteristics of various sports events. The purpose of this study is to identify this problem and to investigate the effect of sports taping on golf swing when wearing functional inner-wear. The subjects of this study were 8 male golfers belonging to Korea Professional Golf Association, and Launch monitor and Trackman were used to find out golf club action, ball pitch, distance, etc. There are three types of clubs: driver, wood, and iron, and the first experiment was carried out using only functional inner-wear. In the second experiment, we experimented with functional inner-wear after sports taping, and we compared and analyzed the distance depending on each experiment, the speed of the ball and the club, and the accuracy of the club face. The results of the study were as follows. As a result of driving distance, according to the presence of sports taping on functional inner-wear, there was a statistically significant difference in the driving swing and wood swing, for club and ball speed, there was a statistically significant difference only in the driving swing. Regarding the accuracy by the presence of sports taping on inner-wear, there was a statistically significant difference in the driving swing, wood swing, and iron swing. In conclusion, the sports taping in the functional inner-wear had a positive effect on golf performance improvement, and we hope that golf inner-wear these two specifications combing will be developed in the future.
        4,000원
        917.
        2017.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Functional inner-wear being currently sold is being made without regard to the characteristics of various sports events. The purpose of this study is to identify this problem and to investigate the effect of sports taping on golf swing when wearing functional inner-wear. The subjects of this study were 8 male golfers belonging to Korea Professional Golf Association, and Launch monitor and Trackman were used to find out golf club action, ball pitch, distance, etc. There are three types of clubs: driver, wood, and iron, and the first experiment was carried out using only functional inner-wear. In the second experiment, we experimented with functional inner-wear after sports taping, and we compared and analyzed the distance depending on each experiment, the speed of the ball and the club, and the accuracy of the club face. The results of the study were as follows. As a result of driving distance, according to the presence of sports taping on functional inner-wear, there was a statistically significant difference in the driving swing and wood swing, for club and ball speed, there was a statistically significant difference only in the driving swing. Regarding the accuracy by the presence of sports taping on inner-wear, there was a statistically significant difference in the driving swing, wood swing, and iron swing. In conclusion, the sports taping in the functional inner-wear had a positive effect on golf performance improvement, and we hope that golf inner-wear these two specifications combing will be developed in the future.
        4,000원
        918.
        2017.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        메조포러스 공극구조를 갖는 광촉매 멤브레인은 다양한 환경기술에 적용될 수 있다. 본 연구에서는 TiO2 층을 형 성시킨 광촉매 반응기용 세라믹 멤브레인을 개발하고 이를 염색용액 처리에 적용하였다. 높은 공극률과 균질성을 지닌 TiO2 광촉매층을 그라프트 공중합체를 사용하여 제조하였다. 멤브레인은 광촉매 반응기와 멤브레인 여과를 결합시킨 하이브리드 광촉매 반응기에 성공적으로 적용하였다. 실험결과 정렬된 구조의 TiO2 층이 Al2O3 지지체에 형성되었다. TiO2 층 형성 후 제조된 세라믹 분리막의 순수 투과도는 형성된 광촉매 층 저항으로 감소하였다. 정렬된 구조의 TiO2 층은 UV 결합 시 5시간 안에 완벽한 염색용액 분해를 달성시킬 수 있었다. 광촉매 멤브레인의 염색용액 분해는 Langmuir-Hinshelwood 흡착 모델로 잘 설명할 수 있었다. 또한 TiO2 층이 고정화된 세라믹 멤브레인의 model Congo Red에 대한 1차 속도상수는 Al2O3 지지체 단독인 경우에 비해 약 6배 정도 큰 값을 나타내었다(0.0081 vs. 0.0013 min-1).
        4,000원
        919.
        2017.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The research vessel NARA equipped with an azimuth thruster system was built in 2015. There are few vessels with this propulsion system in Korea. This vessel has two modes such as the normal for maneuvering and the power for investigation, and the other two modes as one axis and two axes on the operating. This type of vessels does not seem to have a clear grasp of the maneuvering character in comparison with the vessel with a conventional propulsion system. So the authors carried out the sea test for the turning, the zigzag and the inclination, and the results are as follows. In turning test, the case of using the two axes mode is much better than the case of using the one axis mode for the elements of turning, such as advance, transfer, tactical diameter and final diameter, but turning hard over the rudder in full speed is very vulnerable to capsize in both modes. In zigzag test, the yaw quicking responsibility index,  is very large excessively, which means a bad counter maneuvering ability, so an operator has to keep in mind that in turning operation. If necessary to avoid collision at head on situation, it may be a more effective method to use the crash astern stop than the turning according to the conditions and circumstances for the shortest stopping distance is very short.
        4,000원
        920.
        2017.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES :In this study, we analyzed the road crossing behavior of older pedestrians on a mid-block signalized crosswalk, and compared it to that of younger pedestrians. In addition, we analyzed the correlation between accidents involving older pedestrians while crossing roads and their behavioral characteristics. Finally, we confirmed the reasons for an increase in accidents involving older pedestrians.METHODS :First, 30 areas with the highest incidence of accidents involving older pedestrians while crossing roads were selected as target areas for analysis. Next, we measured the start-up delay (the time elapsed from the moment the signal turns green to the moment the pedestrian starts walking) and head movement (the number of head turns during crossing a road) of 900 (450 older and 450 younger) pedestrians. The next step was to conduct a survey and confirm the differences in judgment between older and younger pedestrians about approaching vehicles. Finally, we analyzed the correlation between the survey results and traffic accidents.RESULTS :The average start-up delay and head movement of the older pedestrians was 1.58 seconds and 3.15 times, respectively. A definite correlation was obtained between head movement and the frequency of pedestrian traffic accidents. The results of our survey indicate that 17.3% of the older pedestrians and 7.8% of the younger pedestrians have a high crash risk.CONCLUSIONS :Behavioral characteristics of older pedestrians were closely correlated with accidents involving older pedestrians while crossing roads in mid-block signalized crosswalks. Our study indicates that in order to reduce the number of accidents involving older pedestrians, it is necessary to develop an improvement plan including measures such as installation of safety facilities taking the behavioral characteristics of older pedestrians into consideration and their safety education.
        4,000원