The purpose of this paper is to show that the syntactic structures of long-from causative constructions should be derived within the same clause projected by ‘-ke ha-.’ The previous studies suggest that the syntactic structures of long-from causative constructions be divided into two types: one is that the causees are positioned in the main clause and the other is that the causees are positioned in the embedded clause. However, in this paper it is pointed out that there are some problems with the studies and the causees in the constructions should be placed in the embedded clause.

This study began to learn wether or not satisfaction factor of rural tourism is effective to visit for the ordinary foreign people. Research method was parallel-site investigation literature, questionnaire. The analytical data of the study, literature 40 reviews, questionnaire 179 survey in 200 of the subject was using. Measurement and scale was set factors of satisfaction with 'Transportation · Infrastructure', 'Festival · Experience Program', 'Place', 'Room and Food', 'Local People', and 'Buying the Local Product' through the previous studies and preliminary survey. In the statistical analysis method, frequency analysis, crosstabs, multiple regression analysis and a structural equation model analysis was performed, using SPSS and AMOS program. The Structural analysis results showed 'Place' and 'Local People' have an positive effect on the 'Overall Satisfaction'. Satisfaction of the 'Festival · ExperienceProgram', had a major impact also 'Intention of Revisit'. Finally for rural tourism fascination, the contents such as the distinctive local attraction, human resources, information transmission and convenient use is more important than the format and scale.

This paper describes the experimental results for the structural performance of full-scale coupling beams with different reinforcement layout (diagonal and horizontal). For the reinforcements of the coupling beams, high-strength steel bars(SD500 and SD600) were used in order to improve workability and economic feasibility. The rigid steel frames and linked joints were used to maintain the clear span length (distance between both shear walls) of the coupling beam during the cyclic loading. Experimental results indicated that the diagonally reinforced coupling beam specimen could exhibit more ductile behavior compared to horizontally reinforced specimen. ACI318-14 code is applicable to design of coupling beam with diagonally reinforcement, however, that is overestimating the strength of horizontally reinforced coupling beam. It is remarkable that effective elastic stiffness values of both reinforcement details coupling beam significantly lees than ASCE 41-13.

Due to limited human resources, budget and difficulties in accessibility, inspections are not available at proper time. Advanced Technology such as ICT, Sensing, and AI can innovate the management of structure. So, we introduce our developed equipment and future management plan.

The internal displacement of the corrugated steel plate structure reduces structural stability. In this study, we developed a smart checking system to evaluate the stability of the corrugated steel plate culvert structure by laser scanning and image mapping. It is expected that output data can be used in inspecting deformation rates between designs and measured 3D shapes. Also, it can solve the problems in current visual inspection and systemize the inspection tasks scientifically.

This study examined the effects of the embedded auxetic grating structures by design on numerical analysis. Compressive tests were performed and the results showed the effectiveness of auxetic grating structures for the enhancements of stiffness.

Concrete structures built by 3D printing technology is formed as the several concrete layers. Thus, 3D printing technology for concrete structure could have less strength than the design. In this study, fracture energy (fracture toughness) tests for layered concrete in various condition was performed. depending on required time for stacking new layer. Based on the results of performed tests, it was found that fracture energy was decreased due to increased non-bonded time.

In the sliding slab track of railway bridge, a lateral support block is used to control the lateral displacement. Therefore, it is important to analyze the behavior of dowel rebar and the lateral support block of the sliding slab track. In this study, high strength concrete and steel rebar was selected to analyze the behavior of dowel rebar and shear behavior of high strength dowel rebar and the lateral support block were compared to the equations developed by Soroushian et al. (1986) and CEB-FIP (2010).

In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.

In this research, the investigation of the temperature condition of reinforcing bars under laboratory temperature and outside temperature conditions in the insulation curing method of Korean-Chinese concrete bubble sheet to examine the suitability of the bubble sheet curing method. As a result, the heat of hydration of the concrete on the wall part affects the exposed reinforcing bars to delay the temperature drop at the part where the bubble sheet is not laid.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.

This study is a part of the research on the development of safety monitoring system and monitoring program of 3MW offshore wind support structure using fiber optic sensor. In this paper, we propose a maintenance system for offshore wind support structure using fiber optic sensor based on the analysis of current monitoring status and related standards of domestic and overseas offshore wind support jacket structures.

In the case of marine concrete composite structures, damaged by the various environment effect(sea damage, freeze-thaw, carbonation), and then, there is a possibility of going bad in the safety. The purpose of this study is to perform periodic measurements and tests on the durability test site constructed at sea and to provide basic guidelines for future maintenance based on the analyzed data.

In this study, the effect of electromagnetic wave from an electronic device on electric sensor system and optic sensor were analyzed to verify the reduction effect of a optic sensor and applicability to marin structure. Test revealed that optic sensor system was not occurred the noise by electromagnetic waves also had the low range of fluctuation.

There are many cases where large areas of the underground parking lots of residential buildings do not have proper measures against prevention of leakage, resulting in condensation, growth of infectious microogranisms and increase of pollution in the air. This paper discusses a study conducted to understand the awareness of leakage problems and the damage that follows in the underground structures of residential buildings.

This paper aims to develop a wireless unified-maintenance system(WUMS) to obtain real-time structural response of civil structures. The WUMS integrates the GPS module, the strain module and the acceleration module based on the standalone controller, and includes the RF module for remote measurement and the battery for long term operation. In order to evaluate the performance of the WUMS, a response test using a modal shaker and a modal test using a model bridge were performed. The test results using USMS were compared with those measured by wired system. Finally, the developed WUMS was appropriate to obtain the structural response of the civil structure in real-time, unified, and wirelessly.