Recently, research have been rapidly increased for performance of offshore wind turbine. In this study, static structural analysis was carried out for a structural performance of hybrid concrete sub-structure of offshore wind turbine under environmental loads.

In this study, subject to the new shape vibration damping system that can be reused, it performed response analysis. It have developed the analysis model which can be effectively reflect the structural properties of the damping system is verified through the analysis and experimental results of existing. And it analyzed the response characteristics of the developed damping system through the analysis result.

This study investigated the effect of cement type and ground granulated blast furnace slag (GGBS) on the mechanical properties and workability of grout for offshore PSC structures. As the replacement ratio of GGBS increased, the flowability of the grout increased and both intial and final setting times of grout was delayed regardless of cement type. However, the effects of GGBS on the bleeding of grout were different according to the type of cement: as the ratio of GGBS increased, less bleeding was observed for the grout with typeⅠ cement whereas higher bleeding was generated for the grout with type Ⅲ cement. However, there was no significant difference in their compressive strength at 28 day according the different replacement ratio of GGBS from 0 to 40%.

In this study, a new foundation in a spiral type was developed for the solar electric power system. Based on the structural analysis considering the existing design code, the superiority of the new foundation system was verified via a finite element analysis on the structural stability and safety.

In this study, Criteria for common duct reviewed through comparing of other design standards and criteria specifications whether it is for duplication or contradiction. As a result, It was performed to analysis either to move other codes or to be applied as common duct code according to the classified code system.

In this paper, the improvement methods of working platforms arrangement for NPP(Nuclear Power Plant) construction has been reviewed to enhance the construction accessibility. The working platforms will be enlarged and added because of accessibility of the hi-capacity crane for installation of the SC module and the combined module. The vertical elevator and the working tower have been also proposed to increase construction accessibility. It is concluded that the improvement of constructability is possible based on the consultation of construction company.

For the corner joint strengthening of the underground box structures, the strengthening method using pressure members was developed. By the applied pressure on the reinforcing members and the increase of nominal strength due to reinforcing member, the size of the reinforcing members are reduced and the performance of corner joint strengthening is improved.

This study suggested an improvement of expansion joint and asphalt pavement construction to prevent pavement and bridges damage due to alkali silica reaction. First, for the case study of alkali silica reaction, we conducted a field survey of expressway 15 Mokpo - Muan. As a result, those following damages were investigated such as abutment tensile cracks, pavement crazing and rising, joint contractions and localized damage etc. To prevent this, we applied those following improvements to Muan2 bridge and Samjeong bridge of expressway 15 and confirmed improvement effectiveness by monitoring. 1) Installing an expansion joint on a bridge near pavement slabs(3 points), 2) constructing asphalt pavement after removing concrete pavement(6m). In conclusion, through such improvements suggested above, we expect that we will be able to effectively prevent bridges damage due to Alkali Silica Reaction. Consequentially, it will also contribute improving the safety of vehicles in the expressway.

Durability and structural safety of steel structure are severely affected by corrosion caused by deicer material as well as by airborne chlorides in the marine environment. In this study, based on analysis of current status it is suggested that deterioration and durability reduction by the environmental factor such as chlorides should be more reasonably taken into consideration for the accurate inspection and condition evaluation of steel structures.

Scanning technic is implemented with the underground structures: subway, tunnel, shaft, drainage path, spillway, and slurry wall. Both optical and laser scanning system have been conducted to the precise inspection of diagnosis and safety. Image and 3D coordinate from scanning can be utilized in monitoring scope and fundamental database of maintenance. There is a high possibility that the scanning will prevail on inspection and diagnosis.

By using non-destructive inspection equipment, ultrasonic and schmidt hammer, this research performed non-destructive inspection of underwater concrete for more efficient management in underwater concrete structures. And based on instrumented rebound hardness and ultrasonic pulse velocity, we developed the underwater concrete structures-strength estimation models using artificial neural network.

There are two parts in the precise inspection of diagnosis and safety: state assessment and stability analysis. The longitudinal crack(more than 1mm wide) on the top surface of retaining wall has been found. To verify the cause and boundary condition, 3D model has been implemented to the current state: strength, dimension, and external load.

The collapse of a large infrastructure cause serious losses. Therefore, there has been an increasing demand in using Structural Health Monitoring techniques for the building structures so that their maintenance cost and time can be reduced. In this study, a structural health monitoring methodology using dynamic responses is proposed for damage area estimation of a prototype building structure during shaking table testing in different positions of structural damage.

In this paper, it proceed the fascinating experimental study to use the system identification(SI) for a long time measurement. The aim of the study is to identify the dynamic characteristics using the SI based on ambient vibration(AV) tests for monitoring systems at building structures. White noise, which is naturally occurring for harmonic components, and free vibration tests are employed in obtaining output data. A definite answer of the dynamic characteristics manages to extract from the frequency domain decomposition(FDD) method under the condition of the white noise. The singular value of the following test is used by FDD. These results show the validity of AV test and the usability of FDD in comparison with two tests. The result of the study is to design practical criteria for SI for building structures based on AV tests.

A dynamic displacement estimation system is developed by integrating laser Doppler vibromter (LDV) and light detection and ranging (LiDAR). The system includes hardware level integration for simultaneous measurement of two devices and data fusion of two measurement signals based on Kalman filter smoothing algorithms. For hardware integration of two devices, the laser beam directions and the triggering of measurement of LDV and LiDAR are controlled on the level of built-in commands of the devices. The distance data sequentially measured by LiDAR is converted to dynamic displacement of high noise and low sampling rate, and fused with the velocity measured by LDV which has high sampling rate and low noise but accumulated bias error when integrated. Using the Kalman filter based data fusion algorithm, it is able to estimate dynamic displacement in which the drawbacks of two devices are effectively removed. The proposed system is applied to a dynamic loading test on a highway bridge and the performance is verified.

일반적으로 토목 구조물의 피로분석 결과를 향상시키기 위해서는 교량 각 절점에서의 정교한 수치모델 또는 변형률 측정값이 필요하지만 실재하는 토목 구조물의 정교한 수치모델을 만드는 것은 쉽지 않으므로 두가지 모두 쉬운일은 아니다. 또한 구조물의 전 지점에서 시간에 따른 측정 데이터를 계측하는 것 또한 불가능하다. 그래서 본 연구에서는 칼만필터를 이용하여 측정되지 않은 위치에서의 변형률 계측값을 추정하고자 한다. 해양 토목구조물의 인풋을 평균이 0인 BLWN(band limited white noise)으로 가정할 수 없으므로 평균이 0이 아닌 인풋을 사용하였고, 변형률 추정에 데이터 융합의 효과를 확인하기 위해 멀티센서 데이터 융합 기법을 사용하였다.

본 연구에서는 유황을 폴리머화하여 내화학성능이 요구되는 구조물의 콘크리트 표면보호재로 활용할 수 있도록 성능을 검토하였다.평가 결과, 유황폴리머 표면도포재의 중력식 스프레이가 적절한 것으로 나타났으며, 도포횟수는 왕복 3회 이상 도포했을 때 1MPa 이상의 부착강도 확보가 가능하였다. 표면보호재가 도포될 콘크리트 표면조건은 상온조건 (20~30℃) 이상에서 높은 부착강도를 나타내었으며,온도가 높을수록 부착강도가 증가하였다. 표면보호재의 채움재 혼입량에 따른 강도특성 평가결과, 20~40% 정도 혼입된 채움재는 유황폴리머의 수축을 저감시키는 효과를 나타내어 강도 향상에 기여하였다. 또한, 플라이애시 보다는 규사 혼입시 부착강도가 높았고, 동시 혼입시가장 우수한 부착강도 특성을 나타내었다. 화학저항성은 플라이애시 및 규사를 각각 20% 대체한 배합에서 부착강도 저하가 최소로 되어우수한 내화학성을 나타내었다. 염소이온 침투에 대한 성능평가를 수행한 결과, 표면보호재를 도포하지 않은 시험체에 비하여 유황폴리머표면보호재를 도포한 경우, 29~48% 정도 염소이온침투저항성이 증대되었다. 표면보호재의 도포조건, 압축강도, 부착강도, 화학저항성, 염해저항성 등을 모두 고려하여 볼 때, 본 연구범위에서는 유황폴리머에 채움재로서 규사와 플라이애시를 각각 20%씩 대체하는 것이 적절한수준인 것으로 판단된다.

본 논문은 기존 수중 콘크리트 구조물의 강도관리 및 진단기술의 중요성은 날로 증가함에 따라 개발되고 있는 ROV (Remote Control Vehicle)에 탑재될 수 있는 비파괴 검사 장비를 개발하여 콘크리트 내부의 강도측정을 하고자하였다. 수중화된 슈미트해머와 초음파센서를 통하여 수중에 있는 콘크리트 공시체의 반발경도 및 초음파속도를 계측하여 실제 압축강도 값과 비교하였으며 이를 통하여 수중에서의 강도추정식을 도출하였다. 도출된 3가지 식 중에서 반발경도와 초음파속도를 복합적으로 사용하는 복합식이 가장 정확도가 높았으며 이에 따라 실제 수중에서의 콘크리트의 강도를 추정하고자 할 때 활용 가능성도 높아질 것으로 예상된다.