This study was conducted to establish scores according to the importance levels of each HACCP evaluation item in cattle farm. The importance levels and score of each HACCP evaluation item was derived through the non-compliance rate and severity levels of hazard. In order to change the score criteria according to the importance of each HACCP evaluation item, we analyzed the importance of each HACCP evaluation item by using the portfolio mapping method according to the occurrence frequency and severity levels of hazard. The scores were classified into 3 point, 2 point, and 1 point, respectively, by classifying the importance of each category as ‘high’, ‘middle’ and ‘lower’. Accordingly, we have established a now scoring system of each HACCP evaluation item through this study. Through the result of this study, the objectivity of the comparative evaluation was verified by implementing the currently used HACCP evaluation item to the cattle farm. In conclusion, Implementation of the result of this study to cattle farm may help to increase the objectivity and also improve more safety and hygienic cattle management and raw milk production.
본 연구는 기계주입 방식으로 간단히 재충전 할 수 있는 TPS 공법을 사용하여 실제 건설현장에 적용한 후 콘크리트 균열에 미치는 영향을 알아보고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 초음파 속도의 경우 TPS 공법을 사용하였을 시 주사기 공법에 비해 평균 약 36 mm/sec로 초음파가 빠른 속도로 통과하는 것을 알 수 있었고, 주입깊이의 경우 주사기 공법에서는 부분 충전되는 것을 확인하였으나 TPS 공법의 경우 강한 주입 압력으로 모든 배합에서 보수재가 100% 충전되는 우수한 경향을 나타내었다. 또한, 압축강도의 경우는 TPS 공법 사용 시 평균 16.8 % 증가하는 것으로 나타나 구조적으로 우수한 것으로 나타났다. 이상을 종합하면 주사기 공법에 비해 TPS 공법을 사용하였을 시 균열부위에 주입재가 밀실하게 충전되어 강도 증진으로 인한 품질 향상 및 확인창 설치로 인한 균열보수제의 거동이 확인 가능하다. 또한, TPS 공법 시공구간 532 m에 대하여 약 5일의 공사 기간이 단축됨에 따라 시공성이 우수하여 콘크리트 구조물에 균열 보수공법으로 사용성이 확대될 것으로 기대된다.
해저지진에 의해 촉발되는 파괴적인 지진해일은 지진의 진원지 부근은 물론 멀리 떨어진 해안지역에도 피해를 입힐 수 있다. 우리나라의 동해안은 많은 인구밀집지역과 원자력발전소가 위치하고 있어 예상하지 못한 지진해일의 내습으로부터 위험에 노출되어 있다. 본 논문에서는 지진해일 현장조사, 방재대책 및 추가적으로 연구해야 할 주제 등에 대하여 기술한다.
Recently, measurement monitoring is actively used for safety management of facilities. However, since the field measurement data contains many outliers, a preprocessing process is required for reliable behavior analysis of the data. In this paper, we present a detection method of time series outliers and its applications. And we propose precautions for the preprocessing process.
This study evaluated the duck growth performance and the economic benefits on using illite as a feed additive for ducks. Illite powder at three levels (0%, 1%, and 1.5%) was added to commercial duck diets, and fed to 180 one-day-old ducks (Pekin, 3 replicates, 20 ducks per pen) using a randomized block design for 39 days. During the experimental period, there were no significant growth performance differences between treatments (p>0.05), except with the feed conversion ratio (p<0.05), for all periods (8-39 days). In addition, the dietary supplementation of 1% and 1.5% illite did not significantly improve (p>0.05) Feed Intake Cost (FIC), Weight Gain Value (WGV), Meat Production Cost (MPC), Economic Efficiency (EE), Profitability (P), or cost benefit ratio for 8 to 21 d, 22 to 39 d, and 8 to 39 d. However, the differences in meat production cost and profitability between treatments were statistically significant (p<0.05) for all periods (8-39 d). In conclusion, adding 1% and 1.5% illite to duck diets is not beneficial for improving either the duck growth performance or the economic indicators.
This study investigated both leaching of heavy metals and ecological toxicity when coal bottom ash (CBA) generated by power plants has been used to reduce both erosion and turbidity of surface runoff at construction sites. The Korean leaching test (KLT) method, sequential extraction method, and acute toxicity test using Daphnia magna were performed to evaluate the environmental impacts and the ecological risks of CBA. According to the results of the KLT method of CBA, trace amounts of Cu were leached at limit of quantitation whereas metal leaching was not monitored for other heavy metals. Through the sequential extraction method of CBA, the relatively high leaching potential was found for As and Pb due to greater fraction of exchangeable (F1) and bound to carbonates (F2), and reasonable probability of leaching under the reducing/anaerobic environment was expected for Cu due to high faction of bound to Fe?Mn oxides (F3). However, significantly low probability of leaching was expected for Cd, Cr, Ni, and Zn with grater fractions of bound to organic matter (F4) and residual (F5). Additionally, total amount of heavy metals in CBA was lower than criteria for soil pollution concerns, and were similar or slightly lower levels than the ‘15 National soil average concentration excluding Cr6+. Finally, acute toxicity test using Daphnia magna display no impact for mobilization and lethality in either the prefiltration or post-filtration experiment, indicating that the ecological toxicity was insignificant with zero values of toxic unit. Consequently, no environmental impacts or ecological toxicity are expected when CBA generated by power plants has been used to reduce both erosion and turbidity of surface runoff at construction sites.
In this study, the low-temperature vacuum swing adsorption (low temp. VSA) process was applied to the activated carbon adsorption tower for treatment of volatile organic compounds (VOCs) to extend the replacement period of the adsorbent and to solve the difficulties of operation management. A practical application study was performed based on continuous operation in the field. The VSA process removes the adsorbate by reducing the pressure at a relatively low temperature (90℃ or less) to compensate for the disadvantages of the conventional thermal swing adsorption (TSA) process. A pilot scale VSA process with a size of 30 m and 2 min−1 was applied to the small scale painting plant, which is the main source of VOCs, and subject to 100 adsorption/desorption cycles. After the sampling of activated carbon every 20 cycles, the specific surface area and derivative thermogravimetric analysis (DTA) analysis were investigated to analyze the change of activated carbon characteristics with increasing cycles. During 100 continuous cycles, toluene gas was arbitrarily supplied to the pilot VSA process to compare toluene adsorption capacity with respect to raw activated carbon. More than 99% of the VOCs emitted from the paint plant were adsorbed and removed during the operation of the VSA process. The increase in cycle did not affect the specific surface area and micropores of activated carbon. However, the physical adsorption amount of the non-desorbed adsorbate remaining in the micropores tends to increase; therefore, it is considered that the effective adsorption amount decreases as the number of regeneration increases. As a result of the toluene adsorption test of the pilot plant after 100 consecutive cycles, 91% removal efficiency relative to the raw activated carbon was maintained. Thus, stable application of low-temperature VSA equipment is feasible in field application.
The guarantee of the performance of the engineered barriers in a geological repository is very important for the long-term safety of disposal as well as the efficient design of the repository. Therefore, the performance of the engineered barriers under repository condition should be demonstrated by in-situ experiments conducted in an underground research laboratory. This article provides a review of the major in-situ experiments that have been carried out over the past several decades at underground research laboratories around the world to validate the performance of engineered barriers of a repository, as well as their results. In-situ experiments to study the coupled thermal-hydraulicmechanical behavior of the engineered barrier system used to simulate the post-closure performance of the repository are analyzed as a priority. In addition, in-situ experiments to investigate the performance of the buffer material under a real repository environment have been reviewed. State-of-the art in-situ validations of the buffer-concrete interaction, and the installation of the buffer, backfill and plug, as well as characterization of the near-field rock and the corrosion of the canister materials are, also performed.
The influence of various forms of Houttuynia cordata with fermented red koji as feed additives on the performance of duck livestock was evaluated through a field study. Two hundred and forty ducks (Pekins) aged 0–38 d were used. They were randomly assigned to four treatment groups (0%, 1% H. cordata powder with fermented red koji, 1% H. cordata pelleted with fermented red koji, and 1% H. cordata coated with fermented red koji) with four replicates (15 ducks per replication). Foreconomic evaluation, the data (a total of 240 duck) obtained from each treatment were applied to 10,000 ducks per treatment 38-d after the feeding trial. Overall, the results of economic evaluation were the highest in the treatment with 1% H. cordata coated with fermented red koji, followed by 1% H. cordatapelleted with fermented red koji, 1% H. cordatapowder with fermented red koji, and control. In conclusion, using 1% H. cordatawith fermented red koji as coating and pellet type duck diets might be of economic advantage for sustainable environmental management.
휘발성 유기화합물(VOCs)은 유기용매를 주로 사용하는 산업공정에서 배출되는 일반적인 대기오염물질 중 하나로 그 물질 자체가 독성 및 발암성을 지니기도 하고 오존 생성의 전구체로 작용하기도 하여 인체 건강과 환경에 부정적인 영향을 주고 있다. 또한 최근 초미세먼지 2차생성에 기여하고 있음이 알려짐에 따라 VOCs 저감에 대한 국제적인 관심은 더욱 높아지고 있는 실정이다. 중소규모 사업장에서는 VOCs 처리를 위해 주로 활성탄 흡착탑을 이용하고 있으며 활성탄의 짧은 파과점으로 일정기간 사용 후 교체가 필요하지만, 교체 비용 부담에 따른 적절한 유지관리가 미흡하여 VOCs가 직접 대기로 방출되는 문제가 발생되고 있다. 따라서 본 연구에서는 활성탄 파과 후 현장에서 재생이 가능한 흡탈착 공정에 대하여 연구를 수행하였다. 기존 재생 공정인 열탈착(TSA) 공정은 에너지 비용이 많이 소요되며 수분 또는 고온 가스를 사용해야하므로 재생 시간이 길고 부대시설이 필요한 단점이 있어 현장에서 흡착 후 직접 재생하기에는 다소 무리가 따른다. 저온 감압탈착(VSA) 공정은 상대적으로 저온(80∼90℃)에서 진공펌프를 이용하여 탈착하는 방식으로 감압시에 VOCs가 휘발하는 온도가 낮아지므로 상대적으로 낮은 온도에서 탈착이 가능하다. 이에 따라 현장에서 자체재생 가능한 탈착 방법으로 저온 VSA 기술을 적용하였으며, 30 CMM급 흡탈착 시스템을 제작하여 실제 도장 공장의 배출가스에 대한 현장 적용성 연구를 수행하였다. 또한 저온 VSA 공정을 통해 배출되는 탈착가스는 재생시 캐리어가스 유량이 상대적으로 적어 고농도로 배출되므로 회수하여 유기용매로 재활용할 경우 원료 절감에 따른 경제적 효과가 매우 크다. 따라서 VOCs를 회수하기 위한 방법으로 기액 접촉 효율이 높은 용매 직접접촉식 응축 방식을 적용하였으며, 30 LPM 직접접촉식 회수장치를 제작하고 실 탈착가스를 이용한 회수실험을 수행함으로써 본 기술에 대한 현장 적용 가능성에 대하여 평가해보고자 하였다.
본 논문에서는 재활용 필름을 사용한 친환경 그리드형 보강재와 사전에 충진재의 혼입을 통해 분산성을 향상시킨 섬유를 도로 포장층에 복합적으로 적용한 공법의 현장 적용성을 분석하였다. 그리드형 보강재를 구성하고 있는 필름은 폐기된 PE수지를 재활용하여 친환경성을 강조하였고, 아스콘 혼입 섬유는 아스콘 충진재의 사전 혼입을 통한 섬유의 분산성을 확보한 것이다. 복합 섬유를 혼입한 교량 포장층을 시공함에 있어 발생할 수 있는 제반 상황을 사전에 인지할 수 있도록, Mock Up 포장층에 대한 기본적인 성능 분석을 실시하였다. 분석 결과, 친환경 그리드 보강재와 분산성 섬유를 함유한 포장층에서 강도 및 응력, 처짐 저항성에서 모두 기능성이 향상된 것을 확인할 수 있었다. 그러므로, 섬유 실제 현장 적용시 친환경성 재료 도입과 더불어 안전성 측면에도 효율적인 공법이라고 판단된다.
This study introduces the result of dynamic tests carried out for the field application of ferro-nikel slag powder applied PHC PILE. For the test, a high strength, ultra high strength FNS PHC PILE was used as a test body, and a PHC PILE with a diameter of 600mm and a length of 20m was applied.
In this study, we investigated the possibility of using the cementitious material as a base material for rock vegetation through the measurement of adhesion force, internal friction angle and vegetation observation of green soil. From the results, The adhesion force, internal friction angle measurements and the final growth state were improved than that of the existing green soil, so that it could be effectively applied to rock slope.
This paper applied the concept of risk to prevent disasters in reservoirs and to manage them efficiently. However, there is a lack of information on safety management for small reservoirs managed by local governments. Therefore, considering such a reality, the geotechnical failure mode scenarios have been reduced to five types. In this study, the site investigation was carried out and the geotechnical failure probabilities were calculated based on the results, and then its applicability has been suggested.
In this study, the compressive force is evaluated for the SMA surface reinforcement member which is to improve the bond capacity at cold-joint in PC member. As a result, the total compressive force can be estimated according to the number of wires.
Nuclear power plants in operation are composed of many electrical equipment, and various types of safety related components are installed in the electrical equipment. These internal components are repeatedly replaced due to aging and their performance improvements during the operation of nuclear power plants. Replacement of safety-related shall demonstrate that no malfunction occurs even under amplified seismic load at the level where the components are mounted on the electrical equipment. Therefore, it is necessary to derive the accurate seismic load from the level where the target components are mounted on electrical equipment through the equipment seismic analysis. To perform seismic analysis of electrical equipment, dynamic characteristics should be extracted through in-situ test and utilize to improve the electrical equipment seismic analysis model. In this study, in-situ test of typical NPP’s electrical equipment is performed to derive a natural frequency and mode shapes in the horizontal direction.
There are weaknesses of water-pipe buried at river because of difficulty like to invisible exposure by scour. These weaknesses cause flotation, deformation and damage of pipeline. Therefore, this paper presents the survey instrument applying GNSS that KISTEC has recently introduced. Also, we has verified reliability by discovering exposed water-pipe on field
콘크리트 비파괴강도 추정식은 일반적으로 콘크리트 강도를 결정하는데 사용된다. 그러나 기존의 추정식들은 대부분 제한된 실험변수를 토대로 제안되어 배합조건, 강도특성 등이 다양한 실제 공용중 교량의 콘크리트 압축강도 추정시 많은 오류를 포함한다. 본 연구에서는 297개 공용 교량의 정밀안전진단 결과 중 콘크리트 비파괴시험 및 현장 코어강도 시험결과를 토대로 콘크리트 부재의 코어강도와 비파괴 추정강도 평가결과를 비교분석하였다. 분석결과 분석이 이루어진 기존 추정식들 중 일본건축학회 CNDT소위원회 강도계산식이 다른 추정식에 비하여 실제파괴강도와의 오차가 가장적고 상관분석의 신뢰도도 가장높은 것으로 검토되었다. 그러나 이 추정식은 코어강도가 30 MPa이상일 때 추정강도는 과소평가되는 것으로 나타났다. 이에 본 논문에서는 추정식에 의한 강도와 현장 코어강도사이의 관계를 활용하여 회귀분석을 통한 개선된 비파괴강도 추정식을 제안하였다.
기존의 LB-DECK는 레티스바와 현장에서 배근되는 철근과의 간섭이 시공성 등을 저하시키는 문제점이 지적되고 있었다. HB-DECK는 레티스바의 형태를 단순화하고, 방향을 주철근 방향에서 배력근 방향으로 전환하였으며 강성을 증가시키기 위해 하면에 리브를 설치하였다. 본 연구에서는 HB-DECK가 프리캐스트 콘크리트 슬래브로써 성능을 발휘할 수 있는지를 검증하고자 하였다. 이를 위해 도로교설계기준(2015)에 의한 구조검증과 HB-DECK와 현장타설 콘크리트와의 합성거동 분석을 위해 정적재하시험을 수행하였다. 범용구조해석 프로그램인 MIDAS FEA를 이용하여 3차원 유한요소해석을 수행하였으며, 해석결과와 실험결과를 비교분석하였다. 그 결과, HB-DECK는 현장타설 콘크리트와 완전한 합성거동을 하는 것으로 나타났으며, 도로교설계기준(2015)에서 요구하는 구조성능을 만족하는 것으로 나타났다.
본 연구의 목적은 고준위폐기물 처분기술 개발과 관련하여 현장실증 연구를 위해 사용될 공학규모 이상의 균질 완충재 블록 을 제작하기 위한 새로운 방법론을 제시하는 것이다. 이와 관련하여 플롯팅 다이(floating die) 방식의 프레스 재하 및 냉간 등방압프레스(CIP; Cold Isostatic Press) 기법을 국내 최초로 완충재 제작에 적용하였다. 또한 소요 밀도기준을 충족하는 완충재 블록을 생산하기 위한 최적의 제작조건(프레스 및 CIP의 소요 압력)과 현장 적용성을 분석하였다. 상기 기법의 적용을 통해 완충재 블록 내 밀도분포 편차가 현저히 감소하였으며, 이와 동시에 평균 건조밀도가 소폭 상승하고 약 5%의 크기가 감소하였다. 또한 CIP 적용을 통해 응력이완(stress release) 현상이 감소하고, 이로 인해 시간 경과에 따른 표면균열 발생이 현저히 저감됨을 시험제작을 통해 확인하였다. 본 연구에서 제시된 방법론은 공학규모 이상의 균질한 완충재 블럭을 성형할 수 있으며, 또한 이는 선진핵주기 고준위폐기물처분시스템(AKRS; Advanced Korea Reference Disposal System of HLW)의 완충재 소요 밀도기준을 충족하는 것으로 분석되었다.