Fumigation of fruits and vegetables during quarantine and pre-shipment (QPS) treatment should be effective with a shorter fumigation time to minimize phytotoxicity. In this research study, a shorter fumigation time, 2 hours exposure which is shorter than that of the current commercial fumigation procedures using a lower dose of ethyl formate (EF) mixed with phosphine (PH3) on strawberry was investigated. The reciprocal effect between EF and PH3 against nymphs and adult Myzus persicae (Sulzer) and Tetranychus urticae (Koch) was evaluated. In addition, L(Ct)50 and L(Ct)99 of EF only and EF mixed with PH3 were analyzed at 5°C and 20°C. The synergistic ratio (SR) of L(Ct)50 and L(Ct)99 for the nymph and adult stages of M. persicae were >1.0, which indicated a synergistic effect between EF and PH3. However, the SR values of L(Ct)50 and L(Ct)99 of the nymph and adult stages of T. urticae were ≤1.0 indicating that there was no synergistic effect between the two fumigants against T. urticae. Our results showed that the reciprocal effect between EF and PH3 has different effects on M. persicae and T. urticae. This could be attributed to the biological and physical differences between the class Arachnida and Insecta. The synergistic effect between EF and PH3 against M. persicae within a shorter exposure period and without phytotoxicity on fruits and vegetables will significantly benefit the horticultural industry.

겨울철 도심지 내 적설 피해를 줄이기 위해 사용되고 있는 제설제는 주로 염화칼슘을 사용하고 있으며 주변에 식재 된 식물에 피해를 줄 수 있다. 본 연구는 제설제로 이용되는 염화칼 슘의 농도별 처리에 따른 가침박달(Exochorda serratifolia)의 생장과 생리적 반응을 알아보기 위해 수행되었다. 실험처리는 염화칼슘 0(대조구), 1.0, 3.0, 5.0%를 일주일 간격으로 1회 200mL씩 화분에 관주하였다. 염화칼슘 1.0, 3.0% 처리구에서 가침박달의 초장, 초폭, 엽장, 엽수, 생체중, 건물중간 통계적인 유의성은 없었지만 염화칼슘 5.0% 이상의 처리구에서는 가침박달의 초장이 짧아지고, 엽수가 줄어들었으며 생체중, 건물중이 유의적으로 낮았다. 총 엽록소 함량은 대조구를 제외한 모든 염화칼슘 처리구에서 낮게 측정되었고, MDA는 모든 염화칼슘 처리구에서 대조구보다 높게 측정된 것으로 보아 모든 염화칼슘 처리구에서 가침박달이 염스트레스를 받은 것으로 판단된다. 하지만 염화칼슘의 농도가 높아질수록 Proline 과 SOD 활성이 증가하여 가침박달의 항산화 반응을 확인하였다. 염화칼슘 5.0%를 제외하고는 모든 염화칼슘 처리구와 대조구의 생육이 비슷한 것으로 보아 가침박달은 내염성이 강한 식물종이라고 판단된다.

Foliage plants are considered as an integral part of adding aesthetic and functional purposes in public places. Nowadays, various foliage plants are used to decorate and enhance the aesthetics of several government and private establishments which offer and run services non-stop that involve medical/police emergencies, entertainment, and travel. Under these conditions, indoor foliage plants are subjected to continuous lighting conditions. Thus, this study aimed to determine the growth and physiological response of common foliage plants (Hoya carnosa f. variegata, Epipremnum aureum f. variegata, Rhapis excelsa, Hedera helix, Chamaedorea elegans, and Spathiphyllum wallisii) under continuous light conditions with varying light intensity levels (60, 120, and 180 μmol m-2 s-1). Plant responses were evaluated using growth parameters and the chlorophyll fluorescence analysis of the OJIP curve and its specific energy flux parameters. Results showed that foliage plants showed positive growth and increase in mass yield in higher light intensities and had a minor impact on color quality. Chlorophyll fluorescence analysis suggested that strong stress responses were evident in low light conditions, whereas in fluorescence parameters, continuous lighting conditions with high light intensities showed stress due to excess light to shade-tolerant plants.

Natural killer (NK) cells have cytotoxic effects on tumor cells and viral pathogens. NK cell-derived exosomes (NK-exosomes) also express typical NK cell markers and cytotoxic molecules, therefore, exert anti-tumor and immune homeostatic activities. In this study, canine NK-exosomes separated from cytotoxic NK cell supernatant carried specific markers such as CD81, Alix, and Perforin 1. We examined the anti-tumor effects of NK-exosomes in an experimental murine model using the canine mammary carcinoma cells, REM134. REM134 cells were xenografted of mammary fat pad of mice. CD133, Bmi-1, MMP-3, IL-6, TNF-α, and PCNA are useful as a molecular marker for tumorigenesis and metastasis. The treatment of canine NK-exosomes inhibited tumor growth and significantly (p<0.01) downregulated the expression of Bmi-1, MMP-3, IL-6, TNF-α, and PCNA in REM134-treated mice. Also, the expression of CD133, potent cancer stem cell marker, was significantly downregulated in the canine NK-exosomes-treated mice compared with that of the tumor group. Collectively, these results suggested that canine NK-exosomes has a potential capacity for regulation of cancer progression and metastasis against canine mammary carcinoma.

This study identified single nucleotide polymorphisms (SNPs) that affect the body weight of chickens. Analysis of body weight showed that the Cornish breed had the highest body weight, and the Korean native chicken (Gray Brown) had the lowest body weight. TSH is composed of an α-subunit and a β-subunit, and the TSH-β gene encoding the β-subunit has been reported to be associated with obesity. In chickens, it is located on chromosome 26 and is reported to be associated with growth. The calcium-sensing receptor gene (CaSR) plays a role in the regulation of extracellular calcium homeostasis and is responsible for calcium absorption in the urinary tract, which affects the eggshell quality in poultry. It was shown that TSH-β was strongly correlated with weight in Cornish and Korean native (Gray Brown) chickens, particularly in those with the CC trait. However, CaSR showed no association with body weight in poultry; it was associated with calcium and the eggshell. Thus, selection for TSH-β can be used to produce individuals with more favorable traits in terms of body weight.

The construction industry is considered to be a fatal accident industry, accounting for 28.5% of the total industrial accidents in 2017, as the number of industrial accidents in the construction industry has steadily increased over the past decade. So it is necessary to consider introducing Resilience Engineering, which is actively applied to risky industries around the world, to drastically reduce construction accidents. Although Resilience Engineering, which has emerged as the next-generation safety management centered on Hollnagel since the 2000s, claims the importance of strengthening Resilience abilities considering organizational structure and culture, most studies focus only on developing evaluation indicators. The purpose of this study is to analyze the impact of an organization's safety culture on its Resilience abilities in the construction industry. Specifically, it conducted empirical analysis on the impact of safety culture consisting of ‘communication, leadership and safety systems’ on the Resilience abilities(responding ability, monitoring ability, learning ability, anticipating ability), and the mediation relationship between leadership, communication, and safety system. The survey was conducted on construction workers, and an empirical analysis was conducted on the final 154 responses using SPSS 25 and Smart PLS 3. The results showed that the safety system had a significant impact on all Resilience Abilities, and communication had a significant impact on the remaining three except for anticipating ability among Resilience Abilities. On the other hand, leadership has been shown to have a significant impact on anticipating ability only. In the verifying of the mediation relationship between leadership, communication and safety systems, it was found that leadership affects all Resilience abilities by means of safety systems, but communication can only affect responding ability. This study has practical significance in that it suggests the need for policy-level efforts to introduce and apply Resilience Engineering and then expanded the effective safety management assessment of the construction industry in the future. Moreover, the academic implications are important in that the study attempted to expand the academic scope for a paradigm shift in the future as the safety culture has identified its impact on the Resilience abilities.

In this study, microstructural characteristics and constituent elements of fiberglass splint and cast are examined using a scanning electron microscope and an energy dispersive X-ray spectrometer. As observed by the scanning electron microscope, fiberglass splint and cast had a porous structure with many bundles of fiberglass textures well assembled. Spaces between bundles of the fiberglass splint are triangular or elliptical shaped and the long-axis diameter is measured at about 1 mm. The thickness of fiber bundles covered with plaster is measured at 600 μm and the diameter of a single strand of fiberglass is up to 10 μm. The thickness of the fiberglass bundle of the fiberglass splint is measured at about 700 μm. Spaces between bundles are formed in the shape of triangles with gentle edges and long-axis diameter of up to 1.4 mm, which is larger than that of the splint. The thickness of a single strand of fiberglass of the plaster-coated cast is 11.5 μm, which is thicker than that of fiberglass of the splint. As a result of analyzing constituent elements of the fiberglass cast and the splint with an energy dispersive X-ray spectrometer, Ca, Si, and Al components are identically detected. This result shows that the fiberglass cast has a smoother surface with hardened plaster than the fiberglass splint. The thickness of the fiberglass bundle and the thickness of a single strand of the fiberglass are also larger than those of the fiberglass splint.

Background: Robot-assisted gait training (RAGT) is an effective method for walking rehabilitation. Additionally, the body weight support (BWS) system reduces muscle fatigue while walking. However, no previous studies have investigated the effects of RAGT with BWS on isokinetic strength of quadriceps and hamstring muscles. Objects: The purpose of this study was to investigate the effects of torque, work, and power on the quadriceps and hamstring muscles during RAGT, using the BWS of three conditions in healthy subjects. The three different BWS conditions were BWS 50%, BWS 20%, and full weight bearing (FWB). Methods: Eleven healthy subjects (7 males and 4 females) participated in this study. The Walkbot_S was used to cause fatigue of the quadriceps and hamstring muscles and the Biodex Systems 4 Pro was used to measure the isokinetic torque, work, and power of them. After RAGT trials of each of the three conditions, the subjects performed isokinetic concentric knee flexion and extension, five at an angular velocity of 60°/s and fifteen at an angular velocity of 180°/s. One-way repeated analysis of variance was used to determine significant differences in all the variables. The least significant difference test was used for post-hoc analysis. Results: On both sides, there were significant differences in peak torque (PT) of knee extension and flexion between the three BWS conditions at an angular velocity of 60°/s and 180°/s conditions. A post-hoc comparison revealed that the PT in the BWS 50% was significantly greater than in the BWS 20% and the FWB and the PT in the BWS 20% was significantly greater than in the FWB. Conclusion: The results of this study suggest that the lower BWS during RAGT seems to lower the isokinetic torque, work, and power of the quadriceps and hamstring muscles because of the muscle fatigue increase.

Background: While the formal test has been used to provide a quantitative measurement of core stability, studies have reported inconsistent results regarding its test-retest and intraobserver reliabilities. Furthermore, the validity of the formal test has never been established. Objects: This study aimed to establish the concurrent validity and test-retest reliability of the formal test. Methods: Twenty-two young adults with and without core instability (23.1 ± 2.0 years) were recruited. Concurrent validity was determined by comparing the muscle thickness changes of the external oblique, internal oblique, and transverse abdominal muscle to changes in core stability pressure during the formal test using ultrasound (US) imaging and pressure biofeedback, respectively. For the test-retest reliability, muscle thickness and pressure changes were repeatedly measured approximately 24 hours apart. Electromyography (EMG) was used to monitor trunk muscle activity during the formal test. Results: The Pearson’s correlation analysis showed an excellent correlation between transverse abdominal thickness and pressure biofeedback unit (PBU) pressure as well as internal oblique thickness and PBU pressure, ranging from r = 0.856–0.980, p < 0.05. The test-retest reliability was good, intraclass correlation coefficient (ICC1,2) = 0.876 for the core stability pressure measure and ICC1,2 = 0.939 to 0.989 for the abdominal muscle thickness measure. Conclusion: Our results provide clinical evidence that the formal test is valid and reliable, when concurrently incorporated into EMG and US measurements.

The formation of CaCO3 in microalgal culture is investigated and applied for effective separation of microalgae. The presence of several cationic ions in the culture medium mediates the formation of 3 types of mineral precipitates depending on the concentration of mineral precursors, Ca2+ and CO3 2−, amorphous nano-flakes, rhombohedral calcites, and spherical vaterites. While amorphous phased precipitates are formed for all concentrations of mineral precursor, only calcites are formed for 30 mM solutions of mineral precursor, and mixtures of calcites and vaterites are formed for 50 and 100 mM solutions of mineral precursor. The harvesting efficiency is also dependent on the concentration of the mineral precursor: from 90 % for 10 mM to 99 % for 100 mM after 60 mins’ of gravitational sedimentation. The formation of nano-flakes on the surface of microalgal cells induces the flocculation of microalgae by breaking the stable dispersion. The negatively charged surface of the microalgal cell is compatible not only with nano-flake attachment but also with the growth of calcitic crystals in which microalgal cells are embedded.

Nitrogen-doped carbon dots (CDts) with tunable fluorescence properties in aqueous media were synthesized hydrothermally. The excitation wavelength variation to obtain the maximum emission produced a blue shift in the emission peaks upon dilution in an aqueous solution. The shift can be explained by a re-absorption phenomenon in a concentrated solution. The interparticle interaction within was responsible to show dilution-dependent optical behavior. The as-synthesized solution of CDts did not show any prominent absorption peak over a wide range. However, upon dilution, two peaks became predominant. The concentration-dependent behavior was observed during the interaction with metal cations. Cationic salts of Co(II) and Hg(II) caused quenching at different dilutions of CDts. This might be explained by the exposure of different surface functional groups during dilution and metal-ion–CDts charge transfer. The quenched fluorescence of CDts was rescued using ascorbic acid. Therefore, the one-pot detection of Co(II)/Hg(II) and ascorbic acid was designed through a ‘Turn Off/On’ phenomenon.

This study was carried out to evaluate the forage yield and feed value of winter crops such as Italian ryegrass (IRG), oat, rye, barley, and hairy vetch. Forage crops were sown on 15 th October 2018 in a paddy field after harvesting rice and forage crops were harvested at two times of 25 th April 2019 and 18 th May 2 01 9. T he h ighest d ry m atter (DM) y ield w as h arvested f rom r ye among t he five species of forage crop on 18 th May. DM yield of all forages was increased 14.4% on 18 th May compared to 25 th April. The highest yield of crude protein (CP) was obtained from hairy vetch on 25 th April, whereas it was decreased (38.1%) on 18 th May. Moreover, the highest total digestible nutrient (TDN) yield and relative feed value (RFV) was harvested respectively from rye and hairy vetch on 25 th April. Delay of harvest time considerably increased DM yield but significantly decreased CP and RFV. In conclusion, rye was the best source of DM and TDN and hairy vetch was the high-quality feed. Rye harvested on 25 th April is the proper forage for resolving Korea’s problem of insufficient forage yield.

Halla horse is crossbreed between Jeju and Thoroughbred horses and is used for riding, racing and meat production. Thus, molecular genetic studies are needed to establish and preserve the industrially valuable Halla horses. This study aimed to analyses the genetic diversity and population structure through 12 microsatellite (MS) markers for Halla and putatively related 3 breeds (Jeju, Mongolian and Thoroughbred horses). On average, the number of alleles, observed heterozygosity (Hobs), expected heterozygosity (Hexp), and polymorphic information content (PIC) among all horses were 10, 0.767, 0.799, and 0.771, respectively. Neighbor-joining tree and STRUCTURE analysis showed that Halla horses were between Thoroughbred and Jeju horses, tend to more influenced by Thoroughbred horses. Therefore, these results could be considered for use as the basic genetic breed relationships resource among the horse breeds (Jeju, Mongolian, and Thoroughbred horses) related to the origins of the Halla horse.