Food traceability (FT) is being developed while food traceability system (FTS) has become the hot topic for the food safety of the food supply chain (FSC), government regulations, and customer’s satisfaction. This survey explored the Korean consumer’s awareness, preferred information, and willingness to pay for the traceability of processed food. 35.2% of the respondents were not aware of FT whereas 77.5% did not know about FTS. The customer’s perception on the purpose of FT was as a consumer's right to know (51.8%), rather than as one enhancing food safety. The customers’ awareness of FT on processed and functional food was lower than that on agricultural, livestock, and fisheries products. The important stage of FSC that the consumers perceive was manufacturing and importing (51.5%), and the preferred information was related with raw materials. Only 7.2% of the respondents perceived FT as food safety-related certifications, which is much lower than HACCP (62.9%) and GMP (17.6%). The consumers had willingness to pay for FT at a premium of 5-10% higher than the regular price. Consumers are paying attention to food safety and quality but they are still unfamiliar with FT. Stakeholders in FSC should work together to increase consumer awareness of FT/FTS and improve consumers’ behavior.

The electrical and interfacial properties of HfO2/Al2O3 and Al2O3/HfO2 dielectrics on AlN/p-Ge interface prepared by thermal atomic layer deposition are investigated by capacitance–voltage(C–V) and current–voltage(I–V) measurements. In the C–V measurements, humps related to mid-gap states are observed when the ac frequency is below 100 kHz, revealing lower mid-gap states for the HfO2/Al2O3 sample. Higher frequency dispersion in the inversion region is observed for the Al2O3/HfO2 sample, indicating the presence of slow interface states A higher interface trap density calculated from the high-low frequency method is observed for the Al2O3/HfO2 sample. The parallel conductance method, applied to the accumulation region, shows border traps at 0.3~0.32 eV for the Al2O3/HfO2 sample, which are not observed for the Al2O3/HfO2 sample. I–V measurements show a reduction of leakage current of about three orders of magnitude for the HfO2/Al2O3 sample. Using the Fowler-Nordheim emission, the barrier height is calculated and found to be about 1.08 eV for the HfO2/Al2O3 sample. Based on these results, it is suggested that HfO2/Al2O3 is a better dielectric stack than Al2O3/HfO2 on AlN/p-Ge interface.

An Al2O3/AlN bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare Al2O3/AlN/GaN metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of A** as 30.45 Acm−2K−2, which is similar to the theoretical value of 26.4 Acm−2K−2 for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the Au/Al2O3/AlN/GaN interface.

We performed temperature dependent current-voltage (I-V) measurements to characterize the electrical properties of Au/Al2O3/n-Ge metal-insulator-semiconductor (MIS) diodes prepared with and without H2O prepulse treatment by atomic layer deposition (ALD). By considering the thickness of the Al2O3 interlayer, the barrier height for the treated sample was found to be 0.61 eV, similar to those of Au/n-Ge Schottky diodes. The thermionic emission (TE) model with barrier inhomogeneity explained the final state of the treated sample well. Compared to the untreated sample, the treated sample was found to have improved diode characteristics for both forward and reverse bias conditions. These results were associated with the reduction of charge trapping and interface states near the Ge/Al2O3 interface.

The purpose of this study is to observe how balance exercise on an unstable platform and on a stable platform affects balance ability. The subjects were 35 adults in their 20s and were randomly assigned to a stable platform group and an unstable platform group. They performed balance exercise three times per week for six weeks. Balance exercise introduced by previous research was modified and complemented for use in this study. Balance ability of the subjects was measured through center of pressure(COP) area, medial-lateral displacement, and anterior-posterior displacement using a portable balance platform BT4. There was significant difference in the COP area between the unstable platform exercise group and the stable platform exercise group. In comparison in differences between the unstable platform exercise group and the stable platform exercise group after the exercise, there was significant difference in anteriorposterior movement. Therefore, exercise on an unstable platform is more effective than exercise on a stable platform in strengthening balance ability.

Vital pulpotomy is a very useful method for disarming of canine tooth, tooth fracture, periodontitis, and malocclusion in veterinary dentistry. Calcium hydroxide is the material commonly used as a liner during vital pulpotomy. This creates a mineralized barrier by stimulating osteoblastic hard tissue repair, arrests the inflammatory response, and soothes dentin. However, the powder or mix type calcium hydroxide materials have many disadvantages due to complicated procedures for use and are hard to handle when vital pulpotomy is followed under general anesthesia in animals. This study was conducted in order to compare the effect of mix and premixed paste type calcium hydroxide as a liner in vital pulpotomy. Six beagle dogs underwent hemisection on the mesial root of the mandibular first molar and vital pulpotomy on the distal root of the first molar. On the distal root of the left and right mandibular first molar, mix type (DYCAL®, Dentsply, USA) and premixed paste type calcium hydroxide (VITAPEX®, Morita, Japan) were used as liners, respectively. Radiological evaluation was performed at immediate, 4, 12, and 20 weeks after vital pulpotomy. According to the results, all teeth had well-formed dentinal bridges, and there were no periradicular lucency, lamina dura loss, or anomalies of the pulp cavity. According to these results, on vital pulpotomy in animals, premixed paste type calcium hydroxide was easy to handle and decreased the anesthesia period due to a more convenient application procedure. A further study of many clinical cases is needed for evaluation of side effects and other problems.

Facing a number of global food-related accidents, the concept and system for food traceability have been designed and introduced in many countries to manage the food-safety risks. To connect and harmonize the various food traceability-information in food traceability system according to the food supply chain, the coding system of identification-number for food-traceability has to be standardized. The GTIN (Global Trade Item Number) barcode system which has been globally standardized and implemented, is reviewed with the mandatory food-labeling regulation in expiration date of processed foods. The integration of GTIN-13 bar-code system for food-traceability is a crucial factor to expand its function in the food-related industrial areas. In this literature, the standard coding system of identification-number for food-traceability is proposed with 20 digit coding number which is combined with GTIN- 13 bar-code (13 digit), expiration date (6 digit), and additional classification code (1 digit). This proposed standard coding system for identification-number has a several advantages in application for prohibiting the sale of hazard goods, food-recall, and inquiring food traceability-information. And also, this proposed coding system could enhance the food traceability system by communicating and harmonizing the information with the national network such as UNI-PASS and electronic Tax-invoice system. For the global application, the identification-number for food-traceability needs to be cooperated with the upcoming global standards such as GTIN-128 bar-code and GS1 DataBar.

This study examines the effects of different environments on the application of hemiplegia patients circuit balance training. Group 1 performed circuit balance training without any auditory intervention Group 2 performed training in noiseless environments and Group 3 performed training in white noise environments. First, among lower extremity muscular strength evaluation items, maximum activity time(MAT) was not significantly different(p>.05). Maximum muscle strength(MMS) increased significantly in Group 3(p<.01), there was no significant difference in MMS among the groups. Average muscle strength(AMS) indexes also significantly increased in Group 3(p<.01), there was no significant difference in AMS among the groups. Second, among balancing ability evaluation items, Berg's balance scale(BBS) scores significantly increased in all groups(p<.05), BBS scores were significantly difference among the groups. Based on the results, Group 1, 2 and Group 1, 3 showed significant increases (p<.05). Functional reach test(FRT) values significantly increased in Group 2, 3(p<.05), and there was no significant difference in FRT values among the groups. Timed up and go(TUG) test values significantly decreased in Group 2, 3(p<.05), and there was no significant difference in TUG test values among the groups. Third, among walking speed evaluation items, the time required to walk 10m significantly decreased in all groups(p<.05), and there was no significant difference in the values among the groups. Average walking speeds showed significant increases in Group 1, 3(p<.05), and there was no significant difference in the values among the groups. Based on the results of this study, noise environments should be improved by either considering auditory interventions and noiseless environments, or by ensuring that white noise environments facilitate the enhancement of balancing ability.

Pine wilt disease, caused by pine wood nematode, Bursaphelenchus xylophilus (Steiner et Buhrer) Nickle, has become the most serious threat to pine trees in Korea since first reported in 1988. Pine wood nematode is transferred to uninfested trees by Monochamus alternatus (Coleoptera: Cerambycidae) (vector). A typical controlling method against vectors in Korea is fumigation of the dead trees infested by vector M.alternatus and B.xylophilus using metam-sodium SL(25%). However, this method is harmful to the environment because of the chemical contamination and vinyl waste in the mountain afterward. Portable Bark Remover (PBR) was contrived to reduce these environmental problems. The vectors oviposite under the bark of the freshly dead trees only. Debark infested trees prohibited the vectors from oviposite and finally, vectors can not complete their life cycle. The PBR is a newly designed as a debarking device that is equipped on top of the chain saw engine allowing ease and rapid debarking of the infested trees at the controlling field. Debarking of freshly-dead trees can eliminate egg-laying and hatch places where between the wood and bark from vectors. The new method for vector controlling using the debarking device is expected to lower-price and high-efficiency comparing with other conventional methods such as “crushing”, “burning” and “fumigation”.

The nitric oxide(NO) is a major factor contri buting to t he loss of neurons in ischemic st roke. demyelina t ing diseases, and other neurodegenerative di sorders . But it is known that NO is not function ing as a direct neurotoxin. NO combined with superoxide(02-) by the diffusion-contl'O ll ed reaction, formed a peroxin it ri te anion (ONOO-)‘ which this s pecies has been shown to contribute to oxidative s igna ling and damage. ONOO stimuJates apoptosis in many cell types. whether ONOO acts direct ly as an ox idant 0 1' the induction of apoptosis is because of the radicals derived from ONOO- decompositi on . But. the mecha ni sm by which ONOO- induces apoptosis is un clear although subsequent forrnation 0 1' reactive oxygen s pecies(ROS) has been suggested in a few reports The aim of this study is to investigate the a nti -apoptotic pathway by inhibi tion 0 1' ONOO synthesis t hrough scavenging of ROS us ing s pecific wavelength 0 1' light irradiation . The present study investi gated the a nti -apop totic effect of the specific wavelength 0 1' irradi ation in Sodium Nitroprusside(SNP) t reated SJ-I-SY5Y ceJls, by MTT, DNA fragmentation, and flow cytometric assay and th rough western blot and caspase-3, -9 activity assay for confirmation of caspase pathway. Also. NO reJease and ROS leveJ was measured in order to observe the changes of NO involved in radical by Griess reaction analysis and DCF'-DH. Results showed that the cell viability were r educed by about 50% of control group by SNP treatment, but re covered to about 80% by 590nm irradiation . The apoptotic cells were observed by flow cytomet ry and DNA fra g mentation assay in SNP-treated group‘ but 590nm irradiation led apoptotic feature to be reduced . Released NO a nd ROS level were increased after SNP treatment but ROS level was dec reased in 590nm irradi at ion - treated group, in spite of high NO concentration fo llowing SNP treatment Also. SNP t reatment led cytochrom C release but 590nm irraidiation inhibit it, hence the expression 0 1' caspase-3 and -9 was dec reased sign ificantly‘ These results showed that 590nm irradiation protect neuronal death thl'Ough bl ocking of NO-induced mi tochondri al apoptotic pathway. Also, it suggests that specific wavelength of irradi ation was used for prevent ion from neurodegenerative disordcr progression

It has been reported that light-emitting diodes(LED) can be used in the treatment of oral diseases. Although bio-stimulatory effects of LED irradiation such as promotes stimulation of wound healing have been well known, there are few reports about molecular mechanism associated with cell cycle by LED irradiation. The purpose of present study was to examine the molecular event in cell cycle of LED irradiation on primary human gingival fibroblast(hGF) in vitro. The source of light for irradiation was a continuous-wave LED emitting at a wavelength of 635nm, and manufactured that energy density was 5mW/cm2 on sample surface. The hGF were irradiated for 1 hour at 37℃ in 5% CO2 humidified chamber. Experimental samples were acquired at 0 (right after irradiation), 8 and 24 hour after irradiation. To investigate the molecular mechanisms associated with cell cycle, growth phase was determined by flow cytometry and mRNA expression of cyclin A, cyclin B, cyclin D1, cyclin E, cdc2, PCNA, p18, p27, p21, and p53 were determined by real time RT-PCR. Flow cytometric analysis demonstrated the percentage of cells in the G1 and S phase were decreased, but the G2 phase increased, which showed cells irradiated by LED were transitioned from S to G2 phase. For mRNA expression, cyclin B, cdc2, PCNA and p53 were increased at 0 hour after irradiation, and most of cell cycle molecules were increased at 8 hour after irradiation. At 24 hour after irradiation, cyclin A, cyclin E, PCNA and p18 were increased. Taken together, LED irradiation induced proliferation of hGF cells through transition from S to G2 phase.