In order to develop the D. adamsi breeding technique that is highly likely to be used as an emotional pet insect, the results of the D. adamsi was collected in the large exhibition Jang Tae-san in Daejeon to the indoor breeding began to spawn after 10 days after the training, the egg laying period was 33.6 days, the average number of spawn per female was 27.7, and the period was 11.8 days. D. adamsi larvae bred with food of oak-boiled molted two times, the duration of 1st larvae development was 11.8 days, 2nd larvae 14.5 days, and the third larvae was 29.4, and the larvae were used to build houses using Masato(soil) and in the pupae, and then in April of the following year. D. adamsi has a characteristic to build a house with fallen leaves and spawn one or two eggs in the fallen leaves, and the results of the spawn mat test using fallen leaves, leaf mold and a sawdust, etc., and the number of spawn was high in the Masato was spread about 3 ~ 5cm, and a fallen leaves on a 10 cm or so, and the growth and survival rate of the larvae were also high. Larvae breeding density was 2 ~ 3 ℓ in the container size to raise the object was normal growth, the higher the density mortality was high and the growth was sluggish. Larvae feeding conditions were normally developed in dry fallen leaves and fermented fallen leaves, compared to the sterile fallen leaves, oak sawdust, sterile fallen leaves and oak sawdust was abnormal, the mortality rate was higher than 50%.

The Asian corn borer, O. furnacalis (Crambidae) and the old world bollworm, H. armigera (Noctuidae) simultaneously cause ear damage in corn in Suwon area. It has been assumed that the second generation of larvae of both insects is responsible for the damage. We, therefore, studied proper spray timing of insecticide in order to reduce the damage. A waxy corn hybrid cultivar, Ilmichal, was sown directly on four plots of a field at April 10, April 20, May 4, and May 18, 2018, respectively. A sodium channel blocker, indoxacarb, was sprayed eight times at 3- or 4-day intervals around the silking stage of corn in each sowing plot. At ear harvest time of each plot, we investigated damaged ratio and length of ear, and the numbers of both insect species. The significantly effective spray timings on reduction of ear damage were the sprays at June 29 and July 2 in the plot sown at April 10, the sprays from July 2 to 13 in the April 20-sown plot, the sprays from July 2 to 19 in the May 4-sown plot, and the sprays at July 19 in the May 18-sown plot, respectively. The damage level was positively related to the insect number. The result indicated that the spray at the silking stage of corn was effective on reduction of ear damage. It was assumed that occurrence time of neonate larvae of the insects at silking stage cause the damage, based on the experimental results using screened pots inoculated with the two species.

상주는 귀농 도시이자 농업 중심 도시로써 농업기술원을 유치할 만큼 생태학적 연구가치가 있는 친환경 도시이다. 특히 경천섬은 낙동강 본류에 있는 상주보 인근에 위치하고 있어 낙동강 생태 환경 연구의 중요 지역 중 하나이다. 하지만, 아직 경천섬에 대한 생물다양성 연구가 부족한 상태이다. 섬과 산지의 생태환경이 다르기 때문에 생물의 다양성도 다를 것이라 간주하고, 경천섬 주변의 생태학적 가치를 재조명할 기초자료를 조사하고자 한다. 이에 경천섬과 인근에 위치한 청룡사 길목 산지에 서식하는 곤충 채집을 통해 생물다양성을 조사하여 비교분석하는 것을 목적으로 한다. 채집방법은 직접잡기, 쓸어잡기, 함정트랩, 흡충관을 이용하였으며, 함정트랩에 사용된 유인제는 소주1.8ℓ와 빙초산350㎖를 혼합하여 사용하였다. 2018년 4월~8월 중 3회 채집과정을 수행하여 목표개체수를 확보하였고, 채집된 곤충은 에탄올을 채운 conical tube에 넣어 냉동실에 보관하여 보존성을 높였다. 채집과정에서 잡은 곤충들을 건조시키고 유사종끼리 분류하고 동정하는 과정을 거쳐 다양도지수, 우점도지수, 종풍부도지수, 종균등도지수, 유사도지수를 계산할 것이다. 기존에 알려지지 않았던 경천섬 일대의 생물다양성을 세세하게 분석하는 과정을 통해 경천섬의 생태학적 가치를 드러내고, 경천섬 일대의 자연환경관리와 보존에 필요한 정보나 체계적인 관리체계를 구축할 기초자료를 제공하고자 한다.

Japanese pine sawyer beetle, Monochamus alternatus Hope (Coleoptera: Cerambycidae) is considered as a serious pest in pine trees. To develop an eco-friendly strategy to manage this forest insect, we collected entomopathogenic fungi from Korean soil and assessed their virulence against the adults of the insect in laboratory conditions. As a result, two isolates with conidial suspension (1.0×107conidia/ml), showed 87% and 90% mortality 12 days after fungal treatment, respectively. We assessed the potential of the fungi-derived destruxin and protease as additives to the fungal isolates, and they showed insecticidal activity via feeding and spraying treatments. Finally, we produced fungal conidia in massive solid cultures and formulated wettable powders, and now studying optimal conditions of oil-based formulation with two isolates. Based on these results, we are evaluating the control efficacy of the fungal agents against M. alternatus in field conditions.

This investigates the microstructure and mechanical properties of Al hybrid material prepared by electromagnetic duo-casting to determine the effect of heat treatment. The hybrid material is composed of an Al-Mg-Si alloy, pure Al and the interface between the Al-Mg-Si alloy and pure Al. It is heat-treated at 373, 573 and 773K for 1h and T6 treated (solution treatment at 773K for 1h and aging at 433K for 5h). As the temperature increases, the grain size of the Al-Mg-Si alloy in the hybrid material increases. The grain size of the T6 treated Al-Mg-Si alloy is similar to that of one heat-treated at 773K for 1h. The interface region where the micro-hardness becomes large from the pure Al to the Al-Mg-Si alloy widens with an increasing heat temperature. The hybrid material with a macro-interface parallel to the tensile direction experiences increased tensile strength, 0.2% proof stress and the decreased elongation after T6 heat treatment. On the other hand, in the vertical direction to the tensile direction, there is no great difference with heat treatment. The bending strength of the hybrid material with a long macro-interface to the bending direction is higher than that with a short macro-interface, which is improved by heat treatment. The hybrid material with a long macro-interface to the bending direction is fractured by cracking through the eutectic structure in the Al-Mg-Si alloy. However, in the hybrid material with a short macro-interface, the bending deformation is observed only in the limited pure Al.

강원도농업기술원에서는 2003년 무름병에 비교적 강하고 화색과 화형이 우수하고 장미 분홍색을 가진 Zantedeschia rehmanni × hybrid ‘Super Gem’과 연한 노랑색 품종 Z. × hybrid ‘Black Magic’을 각각 모본과 부본으로 하여 인공 교배 하였다. 2006년에 개화특성을 검정하여 화색과 화형이 좋은 ‘GZ0616’를 선발하였으며, 2007년에 포장 재배하여 자구 증식률, 초장과 초세 등 1차 특성검정 후 2차 선발하였다. 2013부터 2015년까지 특성검정과 재배시험을 통하여 균일성과 안정성이 인정되어 ‘강교C4-6호’로 최종 선발되었으며, 2017년 2월에 ‘립스마일(Lip Smile)’로 품종등록 되었다. 화포 외부의 주 색은 연노랑바탕 적자색(Y2C+RP79C)이며, 화포 높이는 8.5cm, 폭은 6.2cm로 대형화이다. 개화소요일수는 64.3일, 초장은 66.0cm, 괴경은 80.0g이다. 기호도 평가에서도 ‘Captain Rosette’와 유사하였으며, 절화용으로 이용 가능하다.

To be better fit for highways, pavement systems are required to provide comfortable and safe driving and be structurally durable. Composite pavements can be an effective option as they are more durable by placing a high functional asphalt overlay on a rigid concrete base layer. In order to apply a composite pavement system to the field, it is necessary not only to develop technologies that prevent reflecting crack and deterioration of the base layer, but also to improve bonding performance of materials and ensure structural performance as a pavement system against traffic loading. In advanced countries like Japan, USA and Europe, high-functional composite pavement systems are being put into practice across new highway networks. In this study, we evaluated structural performance (rutting, reflecting crack, and deflection) by applying traffic loads of actual highways through an accelerated pavement tester (APT) of a composite pavement section made up of a quiet porous surface laid over a water-proofing layer, a continuously reinforced concrete base, and a lean concrete sub-base layer, which was developed with new pavement methods used for each layer prior to field application. The APT specimen was constructed with paving materials and equipment actually used on site in the same dimensions (W3.5m*L14m*H2m) as actual highway sections in Korea, and 3-axle double-wheel heavy load (45ton) cart type KALES(Korean Accelerated Loading and Environmental Simulator) traveling on the specimen in both directions was used to simulate traffic loading. After applying around 8,574,000 ESALs of traffic loads, no reflecting crack occurred on the asphalt surface of the composite pavement, without surface distress except for rutting. In order to examine what causes rutting of pavements, we surveyed thickness of pavements by layer and measured asphalt density.

In recent years, pavement distresses have been caused by diverse factors such as spalling, deterioration of repaired sections, blow-up, and alkali aggregate reaction due to changing climate environment of a concrete pavement and its construction and maintenance conditions (supply of materials, increase in use of de-icers, etc,). As a leading repair method for deteriorated concrete pavements, partial-depth repair is implemented in accordance with guidelines of material properties for joints of a concrete pavement and field application evaluation systems, but still some of the repaired sections become deteriorated again at an early stage due to poor construction quality and failure of response to environmental impacts. Distresses that can be corrected with partial-depth repairs are largely divided into those of repair materials and of the existing pavement bonded to repair materials, and combined distress of repair materials and the existing pavement. Although re-repair methods should be different by distress type and scale than conventional pavement repair methods, appropriate repair methods and guidance for re-repairs have not been in place so far, and therefore currently, re-repair practices follow the existing manual of partial depth repairs. Therefore, this study evaluated concrete bond characteristics by removing method and repair scope for an experimental section of frequently distressed pavements to determine a re-repair scope and method for deteriorated partial depth repair sections of concrete pavement, the number of which has increased over time.

Composite pavements are constructed by placing a high functional asphalt surface layer on a high performance concrete rigid base layer and provide a more durable, high functional surface to road users. Service life of composite pavements is dependent on the bonding performance of the lower rigid base and the flexible surface layer. Accordingly, it is necessary to place an impermeability layer between the functional surface layer and the rigid base to enhance bonding performance and to prevent moisture penetration into the rigid base and deterioration of pavement. In order to use optimal composite pavement sections, two types were applied to impermeability layer: highly impermeable water-tight SMA and mastic asphalt currently in use. APT (Accelerated Pavement Testing) and experimental construction were carried out to evaluate bond strengths between the rigid base and the impermeability layer depending on the type of impermeability layers. Composite pavement sections for the APT had a 22 cm concrete rigid base layer and a 5cm functional surface, as well as either 5cm of SMA impermeability layer and 5cm of mastic layer. After applying around 8,574,000 ESALs, pull-off test was conducted, which showed that the mastic section outperformed the SMA section. In the experimental construction, three types of rigid base layers, JCP (Jointed Concrete Pavement), CRCP (Continuously Reinforced Concrete Pavement), and RCCP (Roller Compacted Concrete Pavement), were used for composite pavement sections, and as in the APT, two types of impermeability layers, SMA and mastic, were used per rigid base layer of new and deteriorated concrete pavement. Therefore, seven composite pavement sections in total were constructed. We measured the bond strength over one year or so following the construction of these composite pavement sections and found that regardless of the type of rigid base layer and whether it was new or not, those sections with a mastic impermeability layer had high bond strengths.

In Korea, concrete pavements were first applied to highways in 1981 and as a result of continued increase in length over the past years, 2,592 km of concrete pavement network is currently in service, of which 1,399 km(54%) of concrete pavements is 10 years or older, and 233km(9%) is 20 years or older. The length of concrete pavement sections nationwide has been steadily on the rise every year (EXTRI, 2017). Approximately 54% of current concrete pavement highway network will reach the service life limit in 2025 which means around 660 billion won is needed for future pavement repair project (EXTRI, 2017). Given that concrete pavements beyond design life still have a remaining service life, it is economically advantageous to repair them before reconstruction. Asphalt overlays are a major repair method for older concrete pavements. Depending on the concrete pavement condition, thickness and mixture of asphalt overlays are determined. Service life of asphalt overlays varies by the presence, time and size of cracks in existing concrete pavements and reflecting crack at joints. Temperature change of concrete pavement is among the major reaction parameters of reflecting crack. Reflecting crack develops when asphalt bottom-up cracking by longitudinal shrinkage and expansion due to temperature change of the concrete base layer, top-down cracking by temperature difference between top and bottom of concrete, and shear stress by traffic loading are combined (Baek, 2010). Crack and joint behaviors of concrete pavement vary between the base layer and the concrete surface of composite pavement system, and different conductivity by mixture and thickness of asphalt overlay leads to temperature change of concrete base course. This study measured temperatures of each layer of diverse composite pavements in place on site and analyzed differences in temperature change of concrete base layer depending on mixture and thickness of asphalt overlays. Overlay thickness parameters were 5cm and 10cm, two values most widely used, while mixture parameters were SMA and porous asphalt. Based on temperature change of concrete surface, this study also evaluated the difference of temperature change in concrete base layer with an asphalt overlay on top. Findings from this study are expected to be utilized for studies on mechanism and modeling of reflecting crack in old concrete pavements with asphalt overlays.

The aim of the study was to investigate the effects of incentive spirometry and Ujjayi breathing technique on the pulmonary function of smokers. Subjects were individuals who had a smoking habit of at least a year. Subjects were randomly divided into 3 groups: the incentive spirometry group (n=8), Ujjayi breathing technique (n=9), and a group applying both incentive spirometry as well as Ujjayi breathing technique (n=8). Each intervention was performed twice a day, 5 times a week, for a total of 8 weeks whereupon the change in pulmonary function was evaluated. A spirometer was used to measure FVC, FEV1, and FEV1/FVC. The survey used for this study included the Fagerström Test of Nicotine Dependence (FTND) and the Shortness of Breath Questionnaire (SOBQ). Study results for the comparison within groups showed that in the group that performed both the incentive spirometry and Ujjayi breathing technique, FEV1 improved with statistical significance (p<.05). Furthermore, within this comparison the FEV1/FVC improved with statistical significance. Comparison amongst the groups showed no statistically significant differences in all areas. Following, to effectively increase pulmonary function in young adult smokers, both incentive spirometry and Ujjayi breathing technique should be employed together.

The purpose of this study is to improve practical skill evaluation method of mushroom - trained certified technician's practical skill evaluation which is one of national qualification tests based on national incompetency standards. One of the current National Competency Standards (NCS), mushroom - trained certified technician uses NCS based practical assessment method. In order to improve the current practical evaluation method, we try to improve practical evaluation method based on field customized problem solving ability and improve the practical evaluation method, various evaluation methods should be constructed. On the purpose of identify the diversity and problems of the evaluation method, the experts of the group consultation, the mushroom-related research institute and the related industry collaborated to identify the problems of the actual mushroom - trained certified technician practicum test, This study on the evaluation improvement method was carried out. In this study, the contents of practical test of the current mushroom traits were analyzed and the trends of the latest mushroom industry were widely reflected.

This study is investigated the growth characteristics(number of available stipe, pileus diameter, pileus thickness, stipe length, stipe thickness, object weight, comparison yield ability of 1 cycle) and storage characteristics of ‘Sanjo 701’ (S7) cultivars according to relative humidity. The S7 growth characteristics were investigated by quantifying the growth and the characteristics according to the relative humidity, The storage stability was investigated every 5 days and freshness was measured by ‘Minamide Method’. S7 pileus diameter is The higher the relative humidity was confirmed becomes larger and the more increased relative humidity also increase the comparison yield ability of 1 cycle. However, pileus diameter or stipe length This could not see the big difference in the three treatment groups, the plieus thickness was no significant difference in the treatment of 80% and 95%. The fresh weight of S7 decreased significantly at 80% and 95% relative humidity after 10 days of storage, but decreased continuity in 65% humiditiry. The elongation percentage of S7 pileus was observe in 95% relative humidity, values of L, a and b (SCI), showed the highest L value in 65% and the a value in 95%. b values were similar in 65%, 80% and 95% treatments. On the ‘Minamide Method’ measure freshness was changed from the 10th day of storage at relative humidity of 95%, but humidity of 65% and 80% treatments, it changed after 15 days of storage. In this study growth characteristics and yield were increased at higher relative humidity, but storage stability was decreased. Therefore, it is deemed necessary to change the relative humidity to produce high quality mushrooms.

The Korea Mushroom Resource Bank (KMRB) was launched as a national research resource bank in 2015 by the Ministry of Science, ICT and Future Planning. The main goal of the KMRB is to secure important biological resources, mushroom-forming basidiomycota, significant sources of fundamental and novel substances and materials, as dried specimen, cultures, and genomic DNA. For wider application of fungal resources in education, medicinal and industrial uses, the KMRB will undertake following tasks: 1) Survey natural environments across Korea to catalogue mushroom diversity, 2) Establish resource management system based on accurate identification of mushroom, 3) Evaluate the usefulness of the discovered mushroom, 4) Create a secure preservation and loan system. With a global focus on utilizing natural resources, mushroom resources provide excellent opportunities for academic research, and discovering novel substances for use as medicine and energy.

Bacillus thuringiensis (Bt) produces a variety of insecticidal crystal proteins and widely used as one of the most successful biological control agents. Recently, studies that introduce cry genes into crops to create pest resistance have made much progress, and the total area of land planted with Bt crops has increased substantially. In this study, pest resistance of 8 transgenic Bt rice events with a synthetic cry1Ac gene linked to rice rbcS-tp sequence were assessed under laboratory conditions. Bioassays were performed against Cnaphalocrocis medinalis, which is a significant pest of rice in Asia. C. medinalis larvae were shown to be susceptible to all eight events, even though there were differences between the causes of death. The results differed between developmental stages of the larvae, despite the fact that all 8 events led to high mortalities. These results may be a significant foundation for the evaluation of improved transgenic Bt rice.

Bees of the genus Osmia are cavity-nesting solitary species that play important roles as pollinators. Nest traps are one of the most common methods to study Osmia bees. To elucidate the optimal environmental conditions of nesting sites, we investigated the effects of location, direction, altitude, and sites of nest traps on the rate of trap-nesting Osmia spp. During the collection period, the average rate of trap-nesting Osmia spp. collected within 90 days after the installation of traps was 17.0±20.0%. This percentage was 2.7-fold higher than that of trap-nesting bees in 30 days after the installation of traps. The Jeongseon location exhibited the highest rates of trap-nesting Osmia spp. collected in 30 and 90 days, representing 11.1 ±17.6% and 23.2±22.5%, respectively. The direction of the nest traps did not affect the rate of trap-nesting Osmia spp. The altitude ranges of the traps were 0-199 m, 200-399 m, 400-599 m, 600-799 m and over 800 m. Interestingly, the altitude range of 600-799 m showed the highest rate of trap-nesting bees, which was 40.4±3.9%. Higher altitudes seemed to correspond to higher rates of trap-nesting bees. With regards to the sites where the nests were placed, the rate of trap-nesting bees in a mud wall of an old house was 45.1±25.2%, which was 3-fold higher than that of a nest in an apple orchard. The flowering plants collected at different locations during the trap-nesting activity of Osmia bees belonged to 18 families and 34 species. In conclusion, the rates of trap nests colonized by Osmia spp. were affected by altitude, site, and plant diversity.

As advances in digital technologies (e.g., Apps, QR code, RFID tag) is rapidly changing market environment, marketing researches have extended technology acceptance models in different contexts. Since a supermarket chain, “Home Plus,” in Korea, had opened the first QR code virtual store at the subway platform in 2011, many firms attempt to use QR code technology convergence into their retail business. According to a survey report (Embrian, 2012), QR codes are highly familiar with consumers in Korea, and more than 70% mobile phone users have ever scanned QR codes. Due to ubiquitous nature of QR codes, it is obviously implied that marketers would capitalize the QR code technology on their retail business. Yet, it is skeptical for individuals to adopt QR code virtual store because it is in an infant stage in the retail store context. Therefore, marketers need to predict acceptance and use of QR code virtual store from a consumer perspective. Based on UTAUT (Unified Theory of Acceptance and Use of Technology) suggested by Venkatesh et al. (2003; 2012), this study formulated consumer acceptance model with four core determinants of intentions in the context of QR code virtual stores. Specific objectives are (a) identify perceived value in the context of QR code virtual store; (b) test the changes in consumer perceived value by experience over time; and (c) to predict UTAUT model for consumer acceptance to use QR code virtual store across different time points (i.e., from the time of their initial introduction to stages of experience). A longitudinal field study was conducted at the selected QR code virtual stores among individuals using smart phones. A self-administered questionnaire was developed based on literatures the context of consumer use of QR code virtual store. The multi-item scales of perceived value (i.e., performance expectancy, effort expectance, social influence, and facilitating condition) were adapted from Venkatesh et al.’s (2003) UTAUT constructs. Four items of behavioral intention to use QR code virtual store was developed. All items were measured on 5 points rating scale. Sample in this study was obtained from volunteers who participated in three different points in time: initial experience (T1), one month after first experience (T2) and three months after second experience (T3). Participants were required to visit to an assigned QR code store and do shopping task per each time. Then, they were asked to answer the questions on a survey, and there were 123 valid respondents to the first stage of the field experiment. As removed the respondents who did not participate in T2 or T3 point, a total of 309 pooled data across time (103 each time) were analyzed. The sample represents more females (n=66, 68%) than males (n=31, 32%), aging from 19 to 29 years (mean=21.58 years). Preliminarily, using the data pooled across times, factor analysis was conducted to identify underlying constructs for all research variables. As expected, a factor analysis of perceived value constructs revealed four factors: social influence (5 items), performance expectancy (5 items), effort expectancy (4 items), and facilitating condition (3 items). All factor loadings were ranged from .63 to .86, and all internal consistency reliabilities were greater than .80. Also, a unidimensional behavioral intention (4 items) confirmed to be valid (factor loadings=.88 to .93) and reliable (α=.94). Therefore, it is deemed that content validity and reliability were within acceptable ranges for further analysis. Of the four perceived value constructs, there were significant differences in the effort expectancy (F=7.10, p<.01) and facilitating condition (F=8.22, p<.001) across times of experience. Specifically, the perceive effort expectancy tended to be increased over time, indicating a difference of means between T1 and T2 at the significant level of .01 as a result of Duncan’s post-hoc test. With respect to facilitating condition, the mean tended to be increased over time, but post hoc test indicated a significant difference between T1 and T2. The perceived effort expectancy and facilitating condition tended to be changed in positive from T2 to T3 point, which were not significantly different. Therefore, the finding implies that the second stage of experience (i.e., one month after first experience) is a critical point for consumers to increase perceived value of QR code virtual store as a new retail technology. Otherwise, the other factors, such as social influence, performance expectancy and behavioral intention were not significantly increased during the three times of experience. To predict UTAUT model for consumer acceptance to use QR code virtual store, behavioral intention was served as dependent variable and the four factors of perceived value were served as independent variables in regression analysis. In the initial experience (T1), behavioral intention was significantly predicted by social influence (β=.39, t=4.42, p<.001) and performance expectancy (β=.46, t=4.44, p<.001), which explained for 57% of total variance (F=32.08, p<.001, adjusted R²=.57). In the second experience (T2), behavioral intention was significantly predicted by three factors, such as social influence (β=.43, t=5.91, p<.001), performance expectancy (β=.35, t=4.10, p<.001) and facilitating condition (β=.15, t=2.32, p<.05), accounted for 68 % of total variance (F=52.35, p<.001, adjusted R²=.68). In the three month after second experience (T3), behavioral intention was significantly predicted by social experience (β=.36, t=3.33, p<.01) and performance expectancy (β=.33, t=3.33, p<.001), accounted for 52 % of total variance (F=27.65, p<.001, adjusted R²=.52). This study supports the UTAUT model for consumer acceptance of QR code virtual store over time from a theoretical perspective. It should be noted that social influence and performance expectancy appears to be a determinant of behavioral intention to use in most situations. The effect of facilitating condition on behavioral intention was only significant when experienced in second stage. In addition, future study needs to expend technology acceptance model of virtual store in conjunction with digital technological attributes across different product categories.