This research measured the change in mechanical characteristics of a sample obtained by finishing a metal coating to an engineering plastic manufactured using a 3D printer to satisfy both lightweight and quality characteristics. High-Temp material, which can be applied to space thermal environments with large temperature fluctuations, was applied as the engineering plastic material, and Stereolithography(SLA) method, which has relatively higher precision than Fused Film Fabrication(FFF) method, was selected as the manufacturing method. Electroless & electroplating were performed by metal coating on the surface to satisfy the characteristics of products requiring electrical conductivity. Tensile and bending tests were conducted to verify a change in the mechanical characteristics of a sample completed with a metal coating, and an adhesion test of the metal coating was also added.

This study investigated the quality characteristics of beyolmijang prepared with corn (steamed and roasted corn) with different pretreatments and simultaneously added starter (Bacillus velezensis JH1). pH decreased, whereas total acidity showed a tendency to increase. The moisture content decreased slightly according to the fermentation period. In color, the L and b values decreased in all samples, whereas the a value showed a tendency to increase significantly. In microorganisms, sample D had more lactic acid bacteria, whereas the mold content was lower. The total polyphenol content was highest at six weeks in sample E, and other samples showed a tendency to decrease over eight weeks. Antioxidant activity increased significantly. In particular, the content in sample E was significantly higher. Reducing sugar showed a tendency to increase as the fermentation period increased. The highest content was found in sample C containing roasted corn at six weeks of fermentation. Amino nitrogen and ammonia nitrogen content increased in all samples. As a result of electronic tongue, sample E prepared with steamed corn, roasted corn, and lactic acid bacteria showed a low salty taste, sour taste, and high umami taste and was considered a good material for the development of byeolmijang.

As the demand for aesthetic orthodontic treatment increases, the use of self-ligating ceramic brackets is increasing. For stable treatment, there should be no fracture or deformation of the self-ligation ceramic bracket door. Therefore, considering the situation in which labial displacement of teeth occurs in the orthodontic treatment stage. For this study, a model of the mandibular anterior region of a ceramic self-ligating bracket with a passive sliding door mechanism was selected. The measured tensile force data was substituted into the simulation analysis conditions, and the tensile force, stress distribution, and deformation values were analyzed using the finite element method. Using this, it is able to use the design elements of the orthodontic bracket that should be considered as design inputs in the development stage.

본 논문에서는 구조물의 부분 변위값으로 전체 구조물의 변위 형상을 예측할 수 있는 인공지능 학습기법을 개발하였으며, 개발된 기술의 성능을 실험을 통해 평가하였다. 3차원 공간에서 변위 형상 및 노드 위치 좌표의 특성을 학습에 반영할 수 있는 Image-to-Image 변위 형상 학습과 위치 특징을 결합한 변위 상관 학습 방법을 제시하였다. 개발된 인공지능 학습방법의 성능을 평가하기 위해 목업 구 조 실험을 진행하였고, 3D 스캔으로 측정한 변위값과 인공지능으로 예측한 결과를 비교하였다. 비교 결과 인공지능 예측 결과는 3D 스캔 측정 결과에 비해 5.6~5.9%의 오차율을 보여 적정 성능을 보였다.

PURPOSES : When fire event occurs in tunnel the reinforced concrete is exposed to very high temperature at a very short time period. This study investigates the tensile behavior of steel rebar that experienced high temperature. METHODS : The steel rebar was exposed to 200, 400, 600, and 800℃ following the ISO 834 temperature-time fire curve. Hightemperature- exposed steel rebars were tested using the UTM for their yielding and tensile strengths, and elongation rate. RESULTS : Up to an exposure temperature of 600℃, the tensile properties of the rebar did not vary considerably. However, at 800℃ (which corresponds to a temperature rise time of approximately 22 min), the rebar lost its yielding and tensile strength by approximately 27 and 13%, respectively, compared to the control specimen. Further, the elongation rate increased after exposure to 600℃. The above fundamental tensile test results can be a good reference for future guidelines in the repair manual for tunnels after severe fire events. CONCLUSIONS : When steel rebar experiences high temperatures of 800℃, the yield strength of the rebar reduces approximately 27%. This strength reduction can cause severe structural damage to tunnels that use reinforced concrete as the primary structural elements.

PURPOSES : With the recent enactment of the 「Framework Act on Sustainable Infrastructure Management」 in Korea, the establishment of mid- to long-term management plans for social infrastructure and the feasibility evaluation of maintenance projects have become mandatory. To this end, the life cycle cost analysis is essential. However, owing to the absence of a deterioration model, trials and errors are in progress. METHODS : In this study, a deterioration model was established for bridges, which are the representative social infrastructures of roads, particularly for expansion joints that can cause enormous damage to not only the superstructure but also the substructure. The deterioration model was classified into rubber and steel, based on the material of the expansion joint. The analysis used the inspection and climate data conducted in Korea over the last 12 years. The Bayesian Markov Hazard model was applied as the analysis technique. RESULTS : The average life expectancy by type of expansion joint was analyzed to be 8.9 and 6.6 years for rubber and steel, respectively. For probabilistic life cycle cost analysis, the probability distribution of the life expectancy, validity range by confidence level, and Markov transition probability matrix were presented. CONCLUSIONS : In this study, the basis for deterministic and probabilistic life cycle cost analysis of expansion joints was laid. In future studies, it will be necessary to establish a standardized deterioration model for all types of infrastructure, including all bridge elements.

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

This study investigated the rocking behavior of unreinforced masonry walls and wall piers under cyclic loading. Based on the benchmark tests, the characteristics of load-deformation relations in masonry walls with rocking failure were captured, focusing on observed deformation modes. The rocking strengths of masonry walls (i.e., peak and residual strengths) were evaluated, and the effects of opening configurations on the masonry wall strength were examined. The deformation capacity of the rocking behavior and the hysteresis shape of the load-deformation relations were also identified. Based on the results, modeling approaches for the rocking behavior of masonry walls were discussed.

This study analyzed habitat status of barn swallows within 800 m and changes in potential food resource occurrence for 63 nests (Seocheon 23, Sejong 40) where barn swallows breeding was confirmed in Seocheon and Sejong in 2019 and 2020. As a result of checking habitat compositions of barn swallows in the study area, Sejong showed more varieties of habitat types than Seocheon, showing a larger number of dominant groups. Such large number of dominant groups was found to be an advantageous habitat factor for producing flying insects as potential food resources for barn swallows. As for the production of potential food resources, Seocheon had the highest production in dwelling and stream and Sejong had the highest production in the stream. The production of potential food resources differed in production season by habitat type. This study analyzed compositions of the habitat around the breeding site of swallows. It provides basic data necessary for protecting barn swallow habitats by comparing the production timing and production volume of potential food resources occurring in the habitat.

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

본 연구는 남부 산림지역 고등균류의 임상별 분포 특성 및 다양성을 구명하기 위해 수행되었다. 경상도와 전라도 일대에 임상별 8개씩 총 24개의 고정조사구에서 고등균류를 채집한 결과, 868점의 표본을 채집하였으며, 2문, 6강, 17목, 61과, 134속, 367종으로 동정되었다. 부생성 균류가 62.44%로 가장 높은 비율을 보였으며, 다음으로는 공생성 균류 35.03% 기생성 균류 2.53% 순으로 조사되었고, 우점종은 구름송편버섯 (Trametes versicolor)과 맑은애주름버섯(Mycena pura)으로 확인되었다. 해발고도에 따른 고등균류의 분포는 299m 이하의 조사구에서 74종, 300∼499m에서 299종, 500m 이상에서 153종이 조사되었으며, 채집 시기별 고등균류의 분포는 7, 8월에 각각 190, 152종으로 가장 많이 조사되었 다. 임상별로는 활엽수림에서 192종으로 가장 많이 조사되었고, 혼효림 177종, 침엽수림이 149종으로 조사되었고, 지역별, 고도별, 시기별, 임상별 모두 부생성 균류가 가장 높은 비율로 분포하였다. 종다양도는 300∼499m의 활엽수림에서 7월에 2.2로 가장 높았고, 종 균등도는 고도별, 시기별, 임상별로 비슷한 수준을 나타냈다(0.93-0.97). 본 연구를 통해 얻어진 남부 산림지역 내 고등균류 분포 특성 및 다양성 결과들은 향후 수행될 고등균류 분야 연구의 기초자료로 활용될 것으로 기대된다.

해수 중 존재하는 유해화학물질 검출을 목적으로 센서 시작품 제작하고 성능을 확인하였다. 센서 시작품은 검지부, 기구부, 구 동부로 구성하였다. 센서의 검지부는 ITO (Indium-Tin-Oxide) 금속산화물 나노입자 (metal oxide nanoparticle) 필름을 기판위에 인쇄하여 제작 하였고, 온도와 HNS 농도를 동시에 검출할 수 있도록 2개의 검출 부분을 갖도록 설계하였다. 센서의 기구부는 검지부와 구동부를 연결하 며, 검출에 영향을 줄 수 있는 화학적 반응을 막기 위해 테프론 재질을 이용하여 제작하였고, 특히 검지부의 착탈이 용이하도록 설계 하 였다. 구동부는 브릿지 회로와 아두이노 보드를 이용하여 전원 공급과 데이터 측정 및 디스플레이가 가능하도록 제작하였다. 시작품의 성 능에 대해서는 기존의 수질 센서를 참고한 성능 사양을 제시하고, 유기용제를 사용한 검지부와 시작품의 동작을 확인하여 응답 (ΔR), 검 출하한 (Limit of Detection), 응답시간 (response time), 오차 (error) 등을 평가하였다. 또한 해수 중 동작 특성을 파악하여 설계 사양이 구현되 었는지 확인하였다.

국내외 해상 위험·유해물질(Hazardous and Noxious Substances, HNS) 물동량이 증가함에 따라 HNS 유출 사고의 위험성이 점차 높아지고 있다. 해상에 유출된 HNS는 해양생태계 파괴를 비롯한 해양환경 오염 및 인명피해를 유발하며, 화재 및 폭발 등을 동반한 2 차 사고 발생 가능성도 존재한다. 따라서 해상 HNS의 신속한 탐지와 각 물질 특성에 적합한 방제전략을 수립해야 한다. 본 연구에서 는 초분광 원격탐사에 기반한 지상 HNS 유출 실험 과정 및 탐지 알고리즘 적용 결과를 제시하고자 한다. 이를 위해 프랑스 브레스트 지역의 야외 풀장에서 스티렌을 유출한 후 초분광 센서를 활용한 동시 관측을 수행하였다. 순수 스티렌 및 해수 스펙트럼은 주성분 분 석(principal component analysis, PCA) 및 N-Findr 기법을 적용하여 추출하였으며, 또한 spectral distance similarity (SDS), spectral correlation similarity (SCS), spectral similarity value (SSV), spectral angle mapper (SAM)을 포함한 분광정합 기법을 적용하여 초분광 영상 내 화소들을 스티렌 및 해수로 분류하였다. 그 결과 SDS 및 SSV 기법이 우수한 스티렌 탐지 결과를 보여주었으며, 스티렌 총 면적은 약 1.03 m2로 추정되었다. 본 연구는 해상 HNS 모니터링에 주요 역할을 할 것으로 기대된다.

작물 생육 진단에 있어서 군락 엽면적과 군락 피복은 주한 요소 이다. 최근에는 이러한 측정을 디지털 카메라를 활용하여 RGB 식생지수로 작물 생육을 측정하고 있다. 본 연구는 밀 재배 기간 카메라의 노출 값을 다르게 설정하여 RGB 컬러 식생 지수와 군락 엽면적지수 및 군락피복에 대해 평가하였다. 군락 엽면적, 군락 피복 및 디지털 영상 측정은 출수 16일전부터 출수 후 25일까지 하였다. 일출 후 30분 이내에 촬영하였다. 노출 값은 셔터 속도를3 수준(1/60s, 1/340s, 1/640s)으로 하였다. RGB 컬러 식생지수 분석은 파이썬으로 하였다. 실제 군락 엽면적과 군락 피복간에는 정의 상관관계(r2 =0.94)를 보였다. 군락 피복 이미지의 ExG, GLI, NGRDI, ExG-ExR, MExG, TGI, MNGRD 및 MExG-CIVE는 군락 엽면적 지수와 및 군락 피복과는 정의 상관관계를 보였다. 그러나 CIVE와 ExR은 부의 상관관계를 보였다. 본 연구 결과 1/640s 가 1/60s와 1/320s에 비하여 노출이 높게 설정된 것으로 보였다. 또한, 토양과 녹색 영역을 분리하는데 있어서 너무 어린 시기 보다는 출수 전이 가장 잘 분리되었다. 따라서 야외에서의 다양한 광 조건에서는 과도한 노출보다는 광 간섭을 줄이는 기술과 함께 작물의 생육 시기와 기상환경을 고려하여 노출 값이 설정되어야 할 것이다.

A new strawberry cultivar ‘Misohyang’ was originated from the cross between ‘Darselect’ and ‘Wongyo 3111’ in 2009. Among hybrids, ‘Misohyang’, a superior individual possessing vigorous growth, capacity to early differentiate flower buds, and excellent physiological characteristics, was selected. Several tests conducted from 2012 to 2014 revealed that this cultivar was suitable for forcing culture due to its faster flowering and harvest time than ‘Seolhyang’. Fruits of ‘Misohyang’ were conical in shape with a red color, which turned dark red color when fruits were fully ripened. Although sugar contents in ‘Misohyang’ fruits were lower than those in ‘Seolhyang’, their aromatic properties were excellent in terms of synergy effect on perception of sweet flavor. In addition, ‘Misohyang’ fruits could maintain high hardness despite a warm temperature during spring. These physiological characteristics of fruits contribute to its high yields in spring, with an average fruit weight of 20 g. Regarding disease resistance, ‘Misohyang’ showed sensitivity to powdery mildew during nursery period and fruit ripening stage. Since the cultivar ‘Misohyang’ has an excellent flavor with attractive red color, sustainable hardness, and high yields in spring, it is expected to be popularly consumed not only for its fresh fruits, but also for its processed fruits.

The present study investigated the optimum additive ratio of wheat straw pellet as a substitute for beet pulp during oyster mushroom cultivation. The chemical properties across treatments were pH of 4.8–5.5, total carbon content of 45.9–46.5%, total nitrogen content of 1.5–1.7%, and carbon-to-nitrogen ratio of 27.8–31.0. Mycelial growth was the fastest in a medium containing 20% wheat straw pellet (at 88.2 mm in ‘Heuktari’ and 70.3–79.6 mm in ‘Suhan-1Ho’); however, there were no significant differences in mycelial density among the treatments. The characteristics of fruiting bodies by variety were as follows. In ‘Heuktari’, the valid stipe number per bottle (1,100 cc) was 22.5 and yield was 177.1 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls. In ‘Suhan-1Ho’, the valid stipe number per bottle (1,100 cc) was 14.0 and yield was 151.2 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls.

국내에서 공용중인 교량은 33,177개로 사회기반시설 중 가장 많은 비중을 차지한다. 이러한 교량은 공용하중, 온도, 습도 등에 의해 거더에 신축량이 발생하게 되고, 거더간 유간거리에 대한 안정성을 확보하기 위해 신축이음장치를 설치한다. 신 축이음장치에는 교량의 누수 및 퇴적물 낙하 등을 방지하기 위해 고무지수재를 설치하는 것이 일반적이다. 하지만 이러한 고무 지수재는 다양한 원인에 의해 쉽게 손상이 발생하게 된다. 손상된 고무지수재를 통해 거더의 부식, 교량하부 인명사고 등 다양 한 2차 피해가 발생할 수 있다. 이러한 피해를 예방하기 위해 교량의 유지관리를 수행하고 있지만 고무지수재 특성상 지속적인 교체는 불가피한 실정이다. 따라서 본 연구에서는 기존 신축이음장치에 활용되는 고무지수재의 문제점을 해결하기 위하여 초탄 성 형상기억합금을 활용한 새로운 지수재 개발 연구를 수행하였다. 초탄성 형상기억합금 지수재에 대한 유한요소해석을 수행 및 분석하였으며, 복원 효과를 통해 지속 사용 가능한 지수재 연구를 검증하였다.