표고 톱밥배지 배양일수별 배지특성을 조사한 결과 ‘산조701호’의 색도는 명도인 L값이 배양 30일에 83.8(±2.5) 에서 배양 120일에 45.7(±2.3)로 감소하였고, a와 b의 값은 배양일수가 증가할수록 증가하였지만 경도는 배양 30일에 9.4(±0.9)g/mm에서 배양 120일에 2.6(±0.2)g/mm으로 감소하였다. ‘농진고’는 명도인 L값이 배양 30일에 86.2(±2.1) 에서 배양 120일에 53.4(±1.3)로 감소하였고, a와 b의 값은 배양일수가 증가할수록 증가하였지만 경도는 배양 30일에 4.8(±0.7)g/mm 배양 120일에 3.8(±1.0)g/mm로 감소하였다. 배양일수별 자실체 특성을 조사한 결과 ‘산조701호’의 배양일수별 첫 수확일은 30일 배양배지는 46일, 60일배양 배지는 89일, 90일배양 배지는 8일로 가장 짧았고, 120일 배양배지가 9일이었다. 자실체 평균무게는 90일 배양배지가 48.3 g으로 가장 높았고 갓 직경, 갓 두께도 가장 높았지만 색도측정결과에서는 120일 배양배지에서 발생된 자실체가 가장 우수한 상품성을 보이는 것을 확인하였다. ‘농진고’는 30일 배양배지가 22일, 60일 배양배지가 18일, 90일 배양 배지가 8일로 가장 짧았고, 120일 배양배지는 9일이었다. 따라서 표고의 배지, 자실체 특성 등을 고려할 때 배지의 배양일수가 120일이 안정적인 수량 및 높은 상품성 확보가 가능할 것으로 판단되었다.

본 연구는 병재배 느타리버섯 정밀재배를 위한 최적 생육모델 개발을 위하여 느타리 ‘수한1호’ 농가를 대상으로 스마트팜 기술을 적용하여 생육환경을 분석한 결과를 보고하고자 한다. 실험 농가의 균상면적은 88 m², 균상형 태는 2열 5단, 냉동기는 5마력, 단열은 샌드위치 판넬 100T, 가습기는 초음파 가습기 2대, 난방은 12KW를 사용 하였고, 5,000병을 입병하여 재배하고 있었다. 느타리버섯 재배농가에서 생육환경 데이터를 수집하기 위하여 설치한 환경센서부로부터 버섯의 생육에 직접적으로 영향을 미치는 온도, 습도, 이산화탄소 농도, 조도 등을 수집 분석하였다. 수집한 온도자료를 분석한 결과, 균 긁기한 후 입상 시 온도는 22°C에서 시작하여 버섯이 발생되어 병을 뒤집기를 할때까지 거의 25°C를 유지하고 자실체가 자라서 수확기에 가까워지면 13°C에서 15°C를 유지하면서 버섯을 수확하였다. 습도자료를 분석한 결과, 습도는 입상에서 생육전 과정동안 거의 100%를 유지하였다. 이산화탄소농도 자료를 분석한 결과, 입상후 3일까지는 서서히 증가하였으나, 그 이후 급격히 증가하여 거의 2,600 ppm 까지 증가하였고, 6일차부터는 환기를 통해 단계적으로 농도를 낮추어 수확기에는 1,000 ppm을 유지하였다. 조도 자료를 분석한 결과, 느타리버섯 입상후 초기에는 거의 빛을 주지 않았고 3~4일차에 17 lux의 빛을 조사하였으며, 그 이 후 주기적으로 115~120 lux의 빛을 조사하면서 생육을 진행하였다. 농가에 재배하고 있는 ‘수한1호’의 자실체 특성은 갓 직경은 30.9 mm, 갓 두께는 4.5 mm이며, 대 두께는 11.0 mm, 대 길이는 76.0mm였다. 대 경도는 0.8 g/mm, 갓 경도는 2.8 g/mm였고, 대와 갓의 L값은 79.9와 52.3이였다. 자실체 수량은 160.2 g/850 ml였고, 개체중은 12.8 g/ 10 unit였다.

본 연구는 경기지역 도축돈 및 도축우의 폐렴병변에서 Mycoplasma spp.의 발생 분포를 조사하고자 수행하였다. 부천 소재 도축장에 출하된 소와 돼지의 폐에 대하여 육안적 검사를 하고, 이 중 병변을 보인 소 192두와 돼지 257두의 폐에 대한 PCR 검사 결과, Mycoplasma spp.는 소에서 147두(76.5%), 돼지에서는 203두(80.9%) 에서 각각 검출되었다. 소, 돼지 각각의 Mycoplasma spp.에 대한 세부 primer를 이용한 검사 결과에서는 소에서 M. agalactiae가 16두(8.3%)에서 검출되었으나, M. dispar, M. bovis 및 M. bovirhinis는 검출되지 않았다. 돼지에서는 M. hyo-pneumoniae가 74두(28.8%), M. hyorhinis가 13두(5.1%) 검출되었다. M. hyosynoviae는 검출되지 않았다. 본 연구를 통해 경기지역 도축우 및 도축돈에서 Mycoplasma성 폐렴이 상재하고 있음을 확인하였다.

In this study, the amount of abrasive wear was predicted effectively by FE simulation and experiment regarding the material and shape of the abrasive. In order to calculate numerically the amount of wear using the Archard wear equation, the normal load between the abrasive and the polyurethane was calculated by FE simulation. The sliding distance can be calculated according to the working conditions, and the hardness of the polyurethane is a known value. The wear coefficient K was calculated inversely by experimental measurement of the wear amount according to the working conditions of the abrasive. In order to verify the proposed calculation method, the wear amount was calculated by using the Archard wear equation by applying the calculated wear coefficient K with regard to arbitrary working conditions. The deviation between the proposed calculation results and the experimental results was within 10%. When the wear coefficient K is calculated by using the proposed method, the wear amount can be estimated. In addition, it was found that the change of the vertical load value concerning penetration depth was the main factor for determining wear amount.

In this paper, the recovery and nanoparticle synthesis of Ag from low temperature co-fired ceramic (LTCC) by-products are studied. The effect of reaction behavior on Ag leaching conditions from the LTCC by-products is confirmed. The optimum leaching conditions are determined to be: 5 M HNO3, a reaction temperature of 75℃, and a pulp density of 50 g/L at 60 min. For the selective recovery of Ag, the [Cl]/[Ag] equivalence ratio experiment is performed using added HCl; most of the Ag (more than 99%) is recovered. The XRD and MP-AES results confirm that the powder is AgCl and that impurities are at less than 1%. Ag nanoparticles are synthesized using a chemical reduction process for recycling, NaBH4 and PVP are used as reducing agents and dispersion stabilizers. UV-vis and FE-SEM results show that AgCl powder is precipitated and that Ag nanoparticles are synthesized. Ag nanoparticles of 100% Ag are obtained under the chemical reaction conditions.

F-containing TiO2 nanopowders are synthesized using simple wet processes (precipitation-based and hydrothermal) from ammonium hexafluorotitanate (AHFT, (NH4)2TiF6) as a precursor to apply as a photocatalyst for the degradation of rhodamine B (RhB). The surface properties of the prepared samples are evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The results confirm that the synthesized anatase TiO2 has sphere-like shapes, with numerous small nanoparticles containing fluorine on the surface. The photocatalytic activity of F-containing TiO2 compared with F-free TiO2 is characterized by measuring the degradation of RhB using a xenon lamp. The photocatalytic degradation of F-containing TiO2 exhibits improved photocatalytic activity, based on the positive effects of adsorbed F ions on the surface.

In this paper, the performance of the Refrigerator is improved by controlling the fan speed on the condenser side or subcooling/superheating degree by superimposing the refrigerant on the inlet side of the compressor to the outlet side pipe. However, these methods may have the effect of lowering the performance due to operation of the severe condition of the main parts and may not achieve the intended performance. The Peltier Module was used to improve the performance of the refrigerator and increase the durability of the main parts through an artificial subcooling device.

Core/shell CdSe/ZnS quantum dots (QDs) are synthesized by a microfluidic reactor-assisted continuous reactor system. Photoluminescence and absorbance of synthesized CdSe/ZnS core/shell QDs are investigated by fluorescence spectrophotometry and online UV-Vis spectrometry. Three reaction conditions, namely; the shell coating reaction temperature, the shell coating reaction time, and the ZnS/CdSe precursor volume ratio, are combined in the synthesis process. The quantum yield of the synthesized CdSe QDs is determined for each condition. CdSe/ZnS QDs with a higher quantum yield are obtained compared to the discontinuous microfluidic reactor synthesis system. The maximum quantum efficiency is 98.3% when the reaction temperature, reaction time, and ZnS/CdSe ratio are 270℃, 10 s, and 0.05, respectively. Obtained results indicate that a continuous synthesis of the Core/shell CdSe/ZnS QDs with a high quantum efficiency could be achieved by isolating the reaction from the external environment.

Following the earthquake that shook the city of Gyeongju, Korea, in 2016, it became apparent that research on the safety of cultural heritages against the seismic hazards is necessary in Korea. Predictions of how historically significant stone pagodas would behave the earthquakes anticipated in near future, which are the subject of this study, is also required. In this study, the dynamic characteristics of 15 cultural heritage designated stone pagodas of Korea were investigated, including natural frequency and damping ratio, and the stiffness of the stone material and its contact area were determined using eigenvalue analysis by assuming the stone pagodas to be multi-degree-of-freedom structures. The results of this study enable the structural modeling of stone pagodas using a finite element analysis program and the method is expected to be useful in assessing the structural safety of stone pagodas against vertical loads as well as lateral forces, including earthquakes. Also, by identifying the dynamic characteristics of the structures, the results of this study can be utilized as a nondestructive testing method to determine the rigidity of cultural heritage structures and to identify inherent problems. The natural frequencies of the Korean stone pagodas were measured to be within 3.5~8.3㎐, excluding cases with distinct natural frequency results, and it was determined that the natural frequencies of the stone pagodas are influenced by various parameters including the height and joint stiffness of the structures.