외래 병해충의 유입이 증가 하고 있고 이들의 유입 및 확산 경로 규명을 위하여 분자 유전학적 분석 방법이 이용되고 있는 실정이며, 본 연구는 외래 해충인 Reticulitermes kanmonensis의 유전적 특성을 분석하기 위한 초위성체마 커(microsatellite)를 문헌을 통해 탐색하였고, NGS(Next-Gen Sequencing) 기술을 통해 새로운 초위성체마커를 개발하였 다. 문헌을 통해 Reticulitermes속에서 개발된 마커29개와 NGS를 통해 선발된 25개의 마커를 탐색 하여, 이중 증폭 및 유용성이 있는 18개의 마커를 선정하였다. 선정된 단일 마커들을 이용하여 6개의 multiplex PCR set 및 증폭 조건을 수립하여 집단유전학 분석에 활용하고자 한다.

We present a study of the inexplicit connection between radio jet activity and γ-ray emission of BL Lacertae (BL Lac; 2200+420). We analyze the long-term millimeter activity of BL Lac via interferometric observations with the Korean VLBI Network (KVN) obtained at 22, 43, 86, and 129 GHz simultaneously over three years (from January 2013 to March 2016); during this time, two γ-ray outbursts (in November 2013 and March 2015) can be seen in γ-ray light curves obtained from Fermi observations. The KVN radio core is optically thick at least up to 86 GHz; there is indication that it might be optically thin at higher frequencies. To first order, the radio light curves decay exponentially over the time span covered by our observations, with decay timescales of 41185 days, 352±79 days, 310±57 days, and 283±55 days at 22, 43, 86, and 129 GHz, respectively. Assuming synchrotron cooling, a cooling time of around one year is consistent with magnetic field strengths B ∼ 2 μT and electron Lorentz factors γ ∼ 10 000. Taking into account that our formal measurement errors include intrinsic variability and thus over-estimate the statistical uncertainties, we nd that the decay timescale  scales with frequency τ ν - 0.2. This relation is much shallower than the one expected from opacity effects (core shift), but in agreement with the (sub-)mm radio core being a standing recollimation shock. We do not find convincing radio flux counterparts to the γ-ray outbursts. The spectral evolution is consistent with the `generalized shock model' of Valtaoja et al. (1992). A temporary increase in the core opacity and the emergence of a knot around the time of the second -ray event indicate that this γ-ray outburst might be an `orphan' are powered by the `ring of fire' mechanism.

Self-cleaning and photocatalytic TiO2 thin films were prepared by a facile sol-gel method followed by spin coating using peroxo titanic acid as a precursor. The as-prepared thin films were heated at low temperature(110 °C) and high temperature (400 °C). Thin films were characterized by X-ray diffraction(XRD), Field-emission scanning electron microscopy(FESEM), UVVisible spectroscopy and water contact angle measurement. XRD analysis confirms the low crystallinity of thin films prepared at low temperature, while crystalline anatase phase was found the for high temperature thin film. The photocatalytic activity of thin films was studied by the photocatalytic degradation of methylene blue dye solution. Self-cleaning and photocatalytic performance of both low and high temperature thin films were compared.

There are three kinds of Pleurotus eryngii : P. eryngii var. eryngii (P. eryngii), P. eryngii var. ferula (P. ferula : A-Wei-Mo) P. eryngii var. nebrodensis (P. nebrodensis : Bai-Ling-Gu). We bred P. ferula using Di-Mon mating and physiological assay and selected as follow (1) ‘Beesan No.1’ produced high yields, (2) ‘Beesan No.2’ was excellent morphological shape and anti-adipogenic Activit, (3) ‘Ergo’ included high ergothioneine such as anto-oxidant material, (4) ‘GW10-45’ included highest ergothioneine such as anto-oxidant material, (5) ‘Maeksong’ included high ergothioneine and effect of anti-inflammatory. We suggest that there are able to food-medicine materials.

Although Agaricus bisporus mushroom is a popular mushroom consumed world-widely, the application of common bio-elements to verify its geographical origin remains highly limited. Therefore, this study aimed to verify whether the six cultivation regions in Korea of A. bisporus could be determined by the stable isotope composition analysis of bio-elements, which are unique and abundant in most living creatures. δ13C, δ15N, δ18O, and δ34S in A. bisporus were influenced by the region, cultivar, and the interactions between these two factors (P < 0.05). In particular, the effect of cultivation region was more significant to the isotope ratio profiles as compared to the mushroom cultivar effect. During the cultivation period of A. bisporus, the C, N, O, and S isotopic fractionation was observed between the mushroom and cultivation medium, note higher in the mushroom (P < 0.05). Two dimensional plot of δ15N, δ18O, or δ34S effectively distinguished the cultivation regions, Nonsan, Buyeo, Boryung, Daegu, and/or Gyeongju examined in this study. Further, these isotope ratio profiles measured in this study would be statistically analyzed with various chemometrics to provide isotope markers for the authenticity of geographical origin. Our preliminary case study improves our understanding of how the isotope composition of A. bisporus varies with respect to cultivation regions and cultivars. In conclusion, the analysis of stable isotope ratios is a suitable potential tool for discrimination between the cultivation origins of A. bisporus collected from Korea, with potential application to other countries after certain validation steps required.

This study was conducted to estimate the effect of home or hetero fermentative lactic acid bacteria(LAB) on chemical composition, fermentation quality, and aerobic stability of rye silage. Rye forage was harvested at dough stage(28.9% of dry matter), chopped to 3-5 cm length, and divided into 4 piles for different inoculations as treatment, following 1) No additives(CON); 2) Lactobacillus plantarum at rate of 1.5 x 105 cfu/g of fresh forage(LP); 3) L. buchneri at rate of 1.2 x 105 cfu/g of fresh forage(LB); and 4) Mixture of LP and LB at 1:1 ratio(MIX). Rye silage was ensiled into 20 L bucket silo in quadruplicate for 0, 1, 4, 7, and 100 day periods. After 100 days of ensiling, the silage treated with LB had lower acid detergent fiber content(p<0.05), but higher in vitro dry matter digestibility(p<0.05). The LB and MIX reduced (p<0.05) pH more rapidly than CON and LP across the ensiling days, but had no difference on 100 days. Silage treated LP had lowest(p<0.05) acetic acid, but highest(p<0.05) propionic acid. In contrast, LB treated silage had highest(p<0.05) acetic acid, but lowest(p<0.05) propionic acid with the absence of butyric acid. On microbial count, LP treated silage had lowest(p<0.05) LAB, yeast, and aerobic stability, whereas LB and MIX treated silages had highest(p<0.05). Mold was not detected across all silages. Therefore, it could be concluded that heterofermentative LAB solely or combo with homofermentative LAB might improve in vitro dry matter digestibility, fermentation characteristics, and aerobic stability of rye silage harvested at dough stage.

This study was aimed to evaluate the dose-response the effects of nano-encapsulated conjugated linoleic acids(CLAs) on in vitro ruminal fermentation profiles. A fistulated Holstein cow was used as a donor of rumen fluid. Nano-encapsulated CLAs(LF, 5% of nano-encapsulated CLA-FFA; HF, 10% of nano-encapsulated CLA-FFA; LT, 5% of nano-encapsulated CLA-TG; HT, 10% of nano-encapsulated CLA-TG) were added to the in vitro ruminal fermentation experiment. In the in vitro ruminal incubation test, the total gas production on incubation with nano-encapsulated CLAs was increased significantly according to the incubation time, compared with the control(p<0.05). The tVFA concentrations on addition of LF and HT were significantly higher than that of the control(p<0.05). Thus, nano-encapsulated CLAs might improve the ruminal fermentation characteristics without adverse effects on the incubation process. In addition, the population of Butyrivibrio fibrisolvens which is closely related to ruminal biohydrogenation was increased by adding HT, while decreased by adding LF at 12 h incubation. These results showed that nano-encapsulated CLA-FFA could be applied to enhance CLA levels in ruminants by maintaining the stability of CLA without causing adverse effects on ruminal fermentation profiles considering the optimal dosage.

Fe-6.5 wt.% Si alloys are widely known to have excellent soft magnetic properties such as high magnetic flux density, low coercivity, and low core loss at high frequency. In this work, disc-shaped preforms are prepared by spark plasma sintering at 1223 K after inert gas atomization of Fe-6.5 wt.% Si powders. Fe-6.5 wt.% Si sheets are rolled by a powder hot-rolling process without cracking, and their microstructure and soft magnetic properties are investigated. The microstructure and magnetic properties (saturation magnetization and core loss) of the hot-rolled Fe-6.5 wt.% Si sheets are examined by scanning electron microscopy, electron backscatter diffraction, vibration sample magnetometry, and AC B–H analysis. The Fe-6.5 wt.% Si sheet rolled at a total reduction ratio of 80% exhibits good soft magnetic properties such as a saturation magnetization of 1.74 T and core loss (W5/1000) of 30.7 W/kg. This result is caused by an increase in the electrical resistivity resulting from an increased particle boundary density and the oxide layers between the primary particle boundaries.

Somatic cell nuclear transfer (SCNT) is the technique which generates embryos by transferring diploid nucleus into an enucleated oocyte, it has produced specific animals successfully in a variety of species. However, the developmental capacity of SCNT embryos is still relatively lower than that of embryos produced in vivo. Oocyte is a kind of lipid rich cells, its quality limits the efficiency of embryo production. L-carnitine is a co-enzyme facilitating the transportation of long chain fatty acids across the inner mitochondria membrane where fatty acids are used for generating adenosine triphosphate (ATP) via beta-oxidation. It also has antioxidant actions which may protect mitochondrial membranes and DNA against damage induced by reactive oxygen species (ROS). Whether L-carnitine is functional in bovine SCNT embryos are unknown. Therefore, the objective of this study was to examine the effects of L-carnitine on oocyte maturation and developmental competence of subsequent SCNT embryos. L-carnitine was supplemented during IVM, then intracellular ROS and GSH levels, mitochondrial activity, gene expression of COCs were analyzed at the end of IVM. SCNT embryos were produced subsequently, apoptosis detection and gene expression evaluation were performed in blastocysts. In the results, treatments with 1.5 mM and 3 mM L-carnitine significantly improved maturation rates (P<0.05). Treatments with 3 mM L-carnitine effectively induced improvement in nuclear maturation, intracellular GSH levels and mitochondrial activity, as well as a reduction in intracellular ROS levels (P<0.05). mRNA levels of CPT1A, ACAA1, ACAA2, AREG, EREG, SOD1, GPX4, GLUT1 and CDC2 transcripts were effectively up-regulated by 3 mM L-carnitine treatments (P < 0.05). Similarly, 3mM L-carnitine induced an increase in blastocyst developmental rates and an improvement in blastocyst quality (P<0.05). Our study indicates that L-carnitine treatment during IVM improves oocyte nuclear maturation and subsequent SCNT embryo development.

Entomopathogenic fungi, widely distributed in nature, have been developed as biopesticides of agricultural pests. However, little is known about isolation method for obtaining a variety of highly virulent strains from the soil. In this work, the previously established method using mealworm (larvae of Tenebrio molitor) as a baiting system was used to efficiently isolate fungal strains from soil, and the isolated fungal library in Korea was established. To isolate entomopathogenic fungi, soil samples from 10 regions of Korea such as Iksan, Imsil, Gunsan, Yeosu, Suncheon, Gwangyang, Jinju, Hamyang, Boseong and Jangseong were collected. Of the collected soils, 21 and 34 isolates of entomopathogenic fungi were isolated from Iksan and Gunsan, respectively. The isolates were classified as genera of Metarhizium, Beauveria and Isaria. This work can suggest an effective insect pathogenic fungal isolation method

Entomopathogenic fungi have been known as promising candidates in biological control. However, a large number of conidia with higher stability should be produced for industrialization. In this work investigated the possibility of several grains for the production of thermotolerant Isaria javanica and I. fumosoroseus conidia. The fungal conidia were produced on ten grains for 14 days in Petri dish conditions. Of the ten granular substrates, millet, perilla seed and barley showed the high conidial production, 15.7 ± 8.4, 17.3 ± 5.2 and 13.5 ± 1.9 × 109 conida/g in I. javanica and 15.9 ± 0.6, 15.0 ± 0.5 and 15.0 ± 0.7 ×109 conida/g in I. fumosoroseus, respectively. However, the two strains showed relatively low thermal stability regardless of substrates, when exposed to 45℃ for 1, 2 and 3 hours. This work suggests a possible substrate for conidial production of entomopathogenic fungi with low cost.

Entomopathogenic fungi are expected to play a role as great biological control agents in the global bio-pesticide market in the future. The first step is the collection of fungal isolates and it should be a platform for the development of highly effective biopesticides. In this work, we constructed a fungal library using a mealworm pathogenecity-based fungal collection method and further characterized some isolates with high virulence. A phylogenetic tree was generated, and of the isolates 17 isolates’ biological features were characterized, such as morphology, virulence against several insect, stability of conidia for heat, production of biologically active materials, such as enzymes. This work reports an attractive entomopathogenic fungal library including the information of effective isolates in pest management.

Many turfgrass pests, Ectinohoplia rufipes, Exomala orientalis and Popillia quadriguttata, cause serious damage to grass fields in Korea. In this study, control of turfgrass pests using entomopathogenic fungi were investigated using Protaetia brevitarsis seulensis as an alternative insect. In a preliminary experiment, some Metathizium sp. showed ca. 60% virulence after 7 days exposure to the entomopathogenic fungi. Compared to the contact-exposure, overall a spray treatment showed lower control efficacy against P. brevitarsis seulensis. Furthermore, mortality of various developmental stages of P. brevitarsis seulensis was investigated under laboratory conditions. This work suggests that when treated with fungi mortality of P. brevitarsis seulensis was closely related with developmental stage. These results provide a basic information for the control of P. brevitarsis seulensis using entomopathogenic fungi

This study aimed to evaluate the quality characteristics of wheat-Makgeolli (WM), a traditional Korean cereal alcoholic drink, using three varieties of wheat, namely Jokyoung (JK), Baegjoong (BJ) and Keumkang (KK). Samples of WM brewed from 100%, 85% and 70% milling rates of the three Korean wheat cultivars were analyzed for alcohol, pH, coloring degree, total acids, soluble solid, free sugars, and organic acids. As the milling rates in wheat decreased, total sugar content in WM increased while the pH of all samples decreased. The WM exhibited 0.95~1.27% in acidity, 10.2~12.5 °Brix in total sugar, and 14~16% in alcohol content. The most organic acids in WM was lactic acid, ranging in all the samples from 85.3~650.3 mg%. The results showed that BJ under a 70% milling rate had the highest reducing sugar contents and 15.97% in alcohol content. The carbohydrate content increased with the milling rate of wheat. Resulting in a positive correlation between carbohydrate content of wheat and total acids, reducing sugars (p<0.001), and alcohol content (p<0.05) in WM. Total sugar content is positively correlated with alcohol and reducing sugar content (p<0.001). Considering the yield, the milling rates will be adjusted to raw material prices.